Numerical simulation of seismic damage and cracking of concrete slabs of high concrete face rockfill dams

Based on the damage constitutive model for concrete, the Weibull distribution function was used to characterize the random distribution of the mechanical properties of materials by finely subdividing concrete slab elements, and a concrete random mesoscopic damage model was established. The seismic response of a 100-m high concrete face rockfill dam(CFRD), subjected to ground motion with different intensities, was simulated with the three-dimensional finite element method(FEM), with emphasis on exploration of damage and the cracking process of concrete slabs during earthquakes as well as analysis of dynamic damage and cracking characteristics during strong earthquakes. The calculated results show that the number of damaged and cracking elements on concrete slabs grows with the duration of earthquakes. With increasing earthquake intensity, the damaged zone and cracking zone on concrete slabs grow wider. During a 7.0-magnitude earthquake, the stress level of concrete slabs is low for the CFRD, and there is almost no damage or slight damage to the slabs. While during a 9.0-magnitude strong earthquake, the percentages of damaged elements and macrocracking elements continuously ascend with the duration of the earthquake, peaking at approximately 26% and 5% at the end of the earthquake, respectively. The concrete random mesoscopic damage model can depict the entire process of sprouting, growing, connecting, and expanding of cracks on a concrete slab during earthquakes.

Seismic responses of high concrete face rockfill dams:A case study

Seismic responses of the Zipingpu concrete face rockfill dam were analyzed using the finite element method. The dynamic behavior of rockfill materials was modeled with a viscoelastic model and an empirical permanent strain model. The relevant parameters were obtained either by back analysis using the field observations or by reference to parameters of similar rockfill materials. The acceleration responses of the dam,the distribution of earthquake-induced settlement, and the gap propagation under the concrete slabs caused by the settlement of the dam were analyzed and compared with site investigations or relevant studies. The mechanism of failure of horizontal construction joints was also analyzed based on numerical results and site observations. Numerical results show that the input accelerations were considerably amplified near the top of the dam, and the strong shaking resulted in considerable settlement of the rockfill materials, with a maximum value exceeding 90 cm at the crest.As a result of the settlement of rockfill materials, the third-stage concrete slabs were separated from the cushion layer. The rotation of the cantilever slabs about the contacting regions, under the combined action of gravity and seismic inertial forces, led to the failure of the construction joints and tensile cracks appeared above the construction joints. The effectiveness and limitations of the so-called equivalent linear method are also discussed.

Technical Progress on Researches for the Safety of High Concrete-Faced Rockfill Dams

The concrete-faced rockfill dam(CFRD) is an important dam type in the selection of high dams to be constructed in Western China,owing to its direct utilization of local materials,good adaptability,and distinct economic advantages.Over the past decades,China has gained successful experience in the construction of 200 m CFRDs,providing the necessary technical accumulation for the development of 250–300 m ultra-high CFRDs.This paper summarizes these successful experiences and analyzes the problems of a number of major 200 m CFRDs around the world.In addition,it discusses the key technologies and latest research progress regarding safety in the construction of 250–300 m ultra-high CFRDs,and suggests focuses and general ideas for future research.

Seepage simulation of high concrete-faced rockfill dams based on generalized equivalent continuum model

This research focused on the three-dimensional(3 D) seepage field simulation of a high concrete-faced rockfill dam(CFRD) under complex hydraulic conditions. A generalized equivalent continuum model of fractured rock mass was used for equivalent continuous seepage field analysis based on the improved node virtual flow method. Using a high CFRD as an example, the generalized equivalent continuum range was determined, and a finite element model was established based on the terrain and geological conditions, as well as structural face characteristics of the dam area. The equivalent seepage coefficients of different material zones or positions in the dam foundation were calculated with the Snow model or inverse analysis. Then, the 3 D seepage field in the dam area was calculated under the normal water storage conditions, and the corresponding water head distribution, seepage flow, seepage gradient, and seepage characteristics in the dam area were analyzed. The results show that the generalized equivalent continuum model can effectively simulate overall seepage patterns of the CFRD under complex hydraulic conditions and provide a reference for seepage analysis of similar CFRDs.

A simplified physically-based breach model for a high concrete-faced rockfill dam:A case study

A simplified physically-based model was developed to simulate the breaching process of the Gouhou concrete-faced rockfill dam （CFRD）, which is the only breach case of a high CFRD in the world. Considering the dam height, a hydraulic method was chosen to simulate the initial scour position on the downstream slope, with the steepening of the downstream slope taken into account; a headcut erosion formula was adopted to simulate the backward erosion as well. The moment equilibrium method was utilized to calculate the ultimate length of a concrete slab under its self-weight and water loads. The calculated results of the Gouhou CFRD breach case show that the proposed model provides reasonable peak breach flow, final breach width, and failure time, with relative errors less than 15% as compared with the measured data. Sensitivity studies show that the outputs of the proposed model are more or less sensitive to different parameters. Three typical parametric models were compared with the proposed model, and the comparison demonstrates that the proposed physically-based breach model performs better and provides more detailed results than the parametric models.

Dynamic response of concrete face rockfill dam affected by polarity reversal of near-fault earthquake

In China,an increasing number of high concrete face rockfill dams(CFRDs)are located in high intensity earthquake zones,some of which are close to the seismic fault line.Recordings suggest that near-fault ground motions are characterized by large one-sided velocity pulses.The conventional dynamic analysis of dams,however,neglects the features of strong ground movements.In this study,under different ground motion levels some numerical dynamic studies considering the one-sided broadband pulses of near-fault earthquakes are presented for CFRDs based on a generalized plasticity model for rockfill materials.The results indicate that the displacements of dam crest corresponding to positive and reverse input of near-fault ground motion make a significant difference,while the displacements of the dam crest under artificial seismic waves are similar.Furthermore,using the horizontal and vertical components as simultaneous excitations near the faults,the displacements of the dam crest before and after reversing the motion produce a larger difference than that using a single component.More importantly,the difference of horizontal displacements of the dam crest caused by polarity reversal of near-fault ground motions increases with the increase of earthquake intensity.Due to the randomness and uncertainties of earthquakes,using a stochastic near-field motion input as excitation without considering the polarity(i.e.,positive vs reversed waveform),does not necessarily obtain a conservative result.

Fuzzy Earthwork Dynamic Allocation and Optimization for Construction of High Concrete Face Rockfill Dam

Due to the complexity of earthwork allocation system for the construction of high concrete face rockfill dam,traditional allocation and planning are not able to function properly in the construction process with strong randomness.In this paper,the working mechanism of earthwork dynamic allocation system is analyzed comprehensively and a solution to fuzzy earthwork dynamic allocation is proposed on the basis of uncertain factors in the earthwork allocation of a hydropower project.Under the premise of actual situation and the experience of the construction site,an all-coefficient-fuzzy linear programming mathematical model with fuzzy parameters and constraints for earthwork allocation is established according to the structure unit weighted ranking criteria.In this way,the deficiency of certain allocation model can be overcome.The application results indicate that the proposed method is more rational compared with traditional earthwork allocation.

Reservoir water effects on earthquake performance evaluation of Torul Concrete-Faced Rockfill Dam

This study presents earthquake performance analysis of the Torul Concrete-Faced Rockfill （CFR） Dam with two-dimensional dam-soil and dam-soil-reservoir finite element models. The Lagrangian approach was used with fluid elements to model impounded water. The interface elements were used to simulate the slippage between the concrete face slab and the rockfill. The horizontal component of the 1992 Erzincan earthquake, with a peak ground acceleration of 0.515g, was considered in time-history analysis. The Drucker-Prager model was preferred in nonlinear analysis of the concrete slab, rockfill and foundation soil. The maximum principal stresses and the maximum displacements in two opposite directions were compared by the height of the concrete slab according to linear time-history analysis to reveal the effect of reservoir water. The changes of critical displacements and principal stresses with time are also shown in this paper. According to linear and nonlinear time-history analysis, the effect of the reservoir water on the earthquake performance of the Torul CFR Dam was investigated and the possible damage situation was examined. The results show that the hydrodynamic pressure of reservoir water leads to an increase in the maximum displacements and principal stresses of the dam and reduces the earthquake performance of the dam. Although the linear time-history analysis demonstrates that the earthquake causes a momentous damage to the concrete slab of the Torul CFR Dam, the nonlinear time-history analysis shows that no evident damage occurs in either reservoir case.

Distribution of acceleration and empirical formula for calculating maximum acceleration of rockfill dams

To find the distribution patterns of dynamic amplification coefficients for dams subjected to earthquake, 3D seismic responses of concrete-faced rockfill dams with different heights and different shapes of river valley were analyzed by using the equivalent-linear model. Statistical analysis was also made to the seismic coefficient, and an empirical formula for calculating the maximum acceleration was provided. The results indicate that under the condition of the same dam height and the same base acceleration excitations, with the increase of the river valley width, the position of the maximum acceleration on the axis of the top of the dam moves from the center to the riversides symmetrically. For the narrow valleys, the maximum acceleration occurs in the middle of the axis at the top of the dam; for wide valleys the maximum acceleration appears near the riversides. The result negates the application of 2D dynamical computation for wide valleys, and shows that for the seismic response of high concrete-faced rockfill dams, the seismic coefficient along the axis should be given, except for that along the dam height. Seismic stability analysis of rockfill dams using pseudo-static method can be modified according to the formula.

Predicting crest settlement in concrete face rockfill dams using adaptive neuro-fuzzy inference system and gene expression programming intelligent methods

This paper deals with the estimation of crest settlement in a concrete face rockfill dam (CFRD), utilizing intelligent methods. Following completion of dam construction, considerable movements of the crest and the body of the dam can develop during the first impoundment of the reservoir. Although there is vast experience worldwide in CFRD design and construction, few accurate experimental relationships are available to predict the settlement in CFRD. The goal is to advance the development of intelligent methods to estimate the subsidence of dams at the design stage. Due to dam zonification and uncertainties in material properties, these methods appear to be the appropriate choice. In this study, the crest settlement behavior of CFRDs is analyzed based on compiled data of 24 CFRDs constructed during recent years around the world, along with the utilization of gene expression programming (GEP) and adaptive neuro-fuzzy inference system (ANFIS) methods. In addition, dam height (H), shape factor (S f ), and time (t, time after first operation) are also assessed, being considered major factors in predicting the settlement behavior. From the relationships proposed, the values of R 2 for both equations of GEP (with and without constant) were 0.9603 and 0.9734, and for the three approaches of ANFIS (grid partitioning (GP), subtractive clustering method (SCM), and fuzzy c-means clustering (FCM)) were 0.9693, 0.8657, and 0.8848, respectively. The obtained results indicate that the overall behavior evaluated by this approach is consistent with the measured data of other CFRDs.

Hydrodynamic pressure on concrete face rockfill dams subjected to earthquakes

The hydrodynamic pressure is an important load on concrete face rockfill dams (CFRDs) subjected to earthquakes,the influence of which,however,is not clear as compared with that in concrete dams.In this paper,the coupling effect between the CFRDs and the reservoir water is studied based on two-dimensional finite element simulations by using a verified procedure.It is found that neglecting the solid-fluid coupling effect not only results in an overestimation of the acceleration response within the rockfill materials but also makes an overestimation of the dynamical stresses in the concrete slabs.For a reliable seismic response analysis of the CFRDs,therefore,the hydrodynamic pressure should be taken into account,particularly when the dam is subjected to a simultaneous excitation in both horizontal and vertical directions.Numerical results show,however,that the compressibility of the water can be safely neglected in the seismic response analyses of the CFRDs even when the dam is as high as 300 m,except when the excitation is quite abundant in high frequency contents.

250 m级特高面板堆石坝混凝土面板顺坡向应力控制措施研究

面板应力变形控制是建设250 m级特高混凝土面板堆石坝的关键难题.大量工程实测案例和研究计算表明,特高面板坝压应力常处于较高水平,对于坝轴向应力来说,采用柔性缝降低压应力措施已被工程界普遍接受,然而,目前对于如何降低面板顺坡向压应力尚缺少有效的解决方法.本文以拟建的240 m级GS面板坝为研究对象,从特殊增模区布置、面板施工顺序、面板低高程柔性横缝、高压力区高强度混凝土材料等4个方面提出改善面板顺坡向应力的工程措施.文中通过三维有限元精细模拟方法分析了提出的顺坡向应力改善措施的效果,文中提出的措施可为250 m面板堆石坝面板应力控制提供借鉴.

高纬度高寒区面板堆石坝防渗面板修复方案及经验

JLBLK水电站大坝是建于高纬度高寒区的百米级全断面堆石面板坝,最大坝高140.3 m。通过降水处理,现场发现18^(#)、19^(#)面板挤压破损程度严重且有加剧趋势,25^(#)、26^(#)、27^(#)面板断裂。经与国内外同类工程比较,水库渗漏量总体偏大,变形量偏大,且尚未收敛,三维流变反演成果表明后期尚有17%的沉降量。为保证修复效果满足后期变形和渗透稳定需要,针对18^(#)、19^(#)面板水上破损区采用高于原设计强度混凝土分小区进行补强,并结合工程特点和设计方案提出适合本工程的修复施工方案,修复后面板各项指标均满足要求。

P波空间斜入射下沥青混凝土面板堆石坝响应特性及面板破坏评价

地震波入射方位和斜入射角度对于沥青混凝土面板堆石坝地震响应结果有着显著影响。本文从地震动传播机制出发,基于波场叠加原理,推导了P波以任意入射方位角和斜入射角空间斜入射下弹性半空间自由场计算公式,建立了P波空间斜入射波动输入模型。以不同应变率下的沥青混凝土单轴动态拉伸试验结果为基础,提出了考虑抗拉强度随应变率实时变化的沥青混凝土面板破坏评价方法。考虑16种不同入射方位角和斜入射角下的P波空间斜入射工况,从面板应力和加速度两方面分析了入射方位角和斜入射角对某实际沥青混凝土面板地震响应特性的影响,并进行了沥青混凝土面板的抗拉破坏评价,分析了静态评价方法与动态评价方法的差异。结果表明:所建立的P波空间斜入射波动输入模型能够准确模拟半空间自由场,波动输入数值解与解析解符合良好;与垂直输入射相比,面板顺水流向、垂直水流向加速度峰值最大分别增加135.9%和92.7%,竖向加速度峰值最大减少68.3%;空间斜输入导致面板动应力增大,主拉应力和主压应力最大分别增加3.6倍和2.7倍,忽略入射方位角和斜入射角可能会严重低估面板的地震响应。传统将静态强度提高30%作为动态强度的面板抗拉破坏判别方法过于严格,本文提出的考虑应变率效应的沥青混凝土面板破坏评价方法较为符合实际。

水循环荷载作用下高面板堆石坝长期变形特性研究

高面板堆石坝的长期变形是面板坝建设中的关键技术问题之一,已有研究大多将长期变形归结为堆石体蠕变的结果,但某些高面板堆石坝的变形原型监测资料显示,仅从堆石体蠕变角度难以解释高面板堆石坝长期变形的机理。通过水布垭面板堆石坝17a的变形监测资料分析和室内低频循环荷载作用下堆石料变形特性试验,探讨了实际运行中库水位周期性变化形成的循环荷载对高面板堆石坝长期变形特性的影响。结果表明:(1)坝体填筑和初次蓄水引起堆石体的瞬时变形和蠕变,堆石体的后期变形主要是水循环荷载长期作用的结果。(2)水循环荷载作用下,堆石体的变形表现为两种形式,其一为不可恢复的永久变形(亦称为残余变形),其二为可恢复的弹性变形。(3)室内低频循环荷载作用试验得到的堆石料变形及其增长规律很好地验证了水循环荷载与堆石坝后期变形的相互关系以及后期变形的力学意义。研究成果为高面板堆石坝长期变形特性研究提供了新的思路,并为具有往复大消落特点的高面板堆石坝变形及安全控制提供借鉴。

强震区抽蓄电站沥青混凝土面板堆石坝抗震稳定性分析

我国西北强震区某拟建抽水蓄能电站上水库采用沥青混凝土面板堆石坝,最大坝高161 m。为分析该坝抗震稳定性,在大坝非线性静力分析基础上,采用改进的等效粘弹性模型和有限元动力时程法等理论,对大坝开展三维有限元地震反应和坝坡抗震稳定性计算。结果表明,大坝在100年1%超越概率的校核地震(地震加速度为0.48g)作用下,坝体及面板的动力反应分布规律合理。其中,坝体顺河向、坝轴向、竖向加速度极值分别为13.93、13.91、13.80 m/s^(2)。考虑静动叠加后,在沥青混凝土面板反弧段的拉应变极值达0.95%,但小于改性沥青混凝土抗拉强度的一般允许值。因此,大坝即使遭遇0.48g的校核地震作用,亦能保持较好的整体安全性,不会出现重大抗震安全事故。

近断层地震动组合斜入射下沥青混凝土面板堆石坝响应研究

西部地区水利工程多建于复杂地震断裂带附近,因此近场地震动的脉冲效应对水工建筑物所产生的影响不可忽略。近断层地震动往往由P波、SV波等共同组成,到达地表后明显带有一定角度,垂直入射假定不再适用,因此有必要开展近断层脉冲型地震动组合斜入射对沥青混凝土面板堆石坝地震响应影响的研究。基于地表二维地震动反演确定P波、SV波斜入射时程,构建近断层地震动组合斜输入模型,选取脉冲型和非脉冲型各5条地震动记录,研究近断层地震动组合斜入射对沥青混凝土面板加速度、应力和坝体永久变形的影响规律。结果表明:与地震动垂直入射相比,面板水平向加速度随P波角度的增大而增大,随SV波角度的增大而减小,竖向加速度及坝体永久变形的规律则相反;面板拉应力随着P波、SV波角度的增大而增大;近断层地震动的脉冲特性对堆石坝的响应有显著放大作用,其中面板拉应力最大增加了116%。

基于ORD的面板堆石坝建模关键技术与应用

针对面板堆石坝在大坝前期设计阶段方案比选多、工作量大的问题,结合面板堆石坝结构设计原理,提出一种基于ORD软件的参数化建模方法,即利用OpenRoads Designer软件研究创建面板堆石坝BIM模型的关键环节和要点,并实现将坝体结构转换为一系列逻辑约束的组件来创建坝参数化模板,并将其应用于贵州省望谟县某面板堆石坝方案比选中。实际应用结果表明,该方法用于面板堆石坝建模和前期设计方案比选切实可行,大大提高了设计效率,且成果输出展示更直观,为面板堆石坝BIM技术应用提供了新思路。

深厚覆盖层超高混凝土面板坝堆石体填筑标准的研究与应用

堆石坝一直采用孔隙率作为填筑控制指标,然而根据现场试验及国内外多个工程实践表明,单一孔隙率指标已经无法满足超高堆石坝的变形控制。由于强震区200 m级超高混凝土面板堆石坝建设期地震动参数调整提高,坝体抗震能力有所降低,阿尔塔什水利枢纽工程面板坝坝顶最后30 m堆石填筑时,提出采用孔隙率与相对密度双控指标控制坝顶填筑,通过增加堆石体碾压遍数提高大坝抗震能力,并进行静动力计算和抗震稳定分析复核。结果表明:坝体变形量有所减小,抗震稳定性有一定提高;采用相对密度与空隙率双指标控制堆石体变形,可以更好地满足超高面板坝堆石体变形控制要求。

面板堆石坝主要分区渗透系数反演及敏感性分析

参数反演是工程渗流分析中确定材料合理的渗透系数的常用手段,但对材料分区较多的面板堆石坝等工程,若对所有分区渗透系数进行反演,将会降低反演效率和精度。对此,以某面板堆石坝工程为例,建立其三维有限元稳定渗流分析模型。通过设计5因子3水平正交试验,并采用测点水头值为分析指标,开展了各分区材料渗透系数对渗流场的敏感性分析,最终确定对渗流场影响较大的材料分区。利用ELM-GA算法对其渗透系数进行反演,结果表明测点水头计算值与实测值最大相对误差仅为2.2%,得到的渗透系数可用于坝址区的渗流计算分析。研究结果可为类似工程提供借鉴。