Optimization of Supercritical Extraction Process of Laoshan Black Tea by Response Surface Methodology

[Objectives]Laoshan black tea was subjected to supercritical CO_(2) extraction. [Methods]The extraction conditions of Laoshan black tea were studied by an orthogonal experiment and optimized by response surface methodology. [Results] The optimum extraction conditions of black tea extract by supercritical CO_(2) extraction were as follows: extraction pressure 23.53 MPa, extraction time 1.73 h, and extraction temperature 49.75 ℃, with which the extract yield could reach 5.15% theoretically. [Conclusions] Based on the traditional extraction process, a supercritical extraction method optimized by response surface methodology and a unique extraction process were formed, which enriches the extraction processes and methods of natural raw materials.

Effect of Allelochemicals of Chinese-fir root extracted by supercritical CO_2 extraction on Chinese fir

Allelochemicals of Chinese-fir root was extracted by technology ofsupercritical CO_2 extraction under orthogonal experiment design, and it was used to analyzeallelopathic activity of Chinese-fir through bioassay of seed germination. The results showed thatas to the available rate of allelochemicals, the pressure and temperature of extraction were themost important factors. The allelochemicals of Chinese-fir root extracted by pure CO_2 and ethanolmixed with CO_2 have different allelopathic activities to seed germination, and the allelochemicalsextracted by ethanol mixed with CO_2 had stronger inhibitory effects on seed germination than thatextracted by pure CO_2.

Supercritical Fluid Extraction of Essential Oil from Dry Rhizome of Ligusticum chuanxiong Hort and Their Characterization by GC/MS

Supercritical fluid extraction (SFE) of essential oil from dry rhizome ofLigusticum chuanxiong Hort was developed. GC/MS was used for the determination of the composition ofessential oil. Forty-four compounds were identified. The conventional extraction method wasconducted in parallel for comparison. The extracts were qualitatively compared by GC/MS. The yieldsof SFE and steam distillation-extraction were 4.16 % ( v/w) and 0.8 % ( v/w), respectively.Application of SFE of zessential oil from dry rhizome of Ligustiaan chuanxiong Hort was preferable.

Extraction of betulin from bark of Betula platyphylla by supercritical carbon dioxide extraction

Betulin, which is a medicinal pentacyclic triterpene, is abundant in the bark of white birch (Betula platyphlly). The bark of birch was collected at Tayuan Forest Farm of Jiagedaqi, Heilongjiang Province in September 2000. Supercritical fluid extraction (SFE) that is a new separation technology has been used for the processing pharmaceutical and natural products. In this paper, the extraction of betulin from the bark of birch by supercritical CO2 extraction was studied. The authors investigated and analyzed a few parameters such as modifier dosage, extraction pressure and extraction temperature. The optimal extrac-tion conditions showed that the modifier dosage used for per gram bark powder was 1.5 mL, the extraction pressure was at 20 Mpa, and the extraction temperature was at 55 C. The velocity of flow of liquid CO2 was at 10 kg/h. The pressure and tem-perature in separation vessel were at 5.5 Mpa and 50 C, respectively.

Optimization of Supercritical Carbon dioxide Extraction of Ginger Essential Oil by Response Surface Method

[Objective] Ginger essential oil （GEO） is widely used in food production and medical field in recent years due to its prominent biological functions, and this study was conducted to obtain high-quality and high-purity ginger essential oil from the fresh ginger. [Method] GEO was extracted from ginger roots by supercritical fluid extraction （SFE） method. The effects of flow rate of CO2, mesh size of ginger powder and volume of entrainer were investigated by single-factor experiments and response surface method. The content and extraction rate of 6-gingerol represented the extraction index of GEO. [Result] The conditions were optimized as follows： flow rate of CO2 at 25 L/h, mesh size of ginger power of 80 mesh, and volume of anhydrous ethanol as entrainer of 92.46 ml. The optimal extraction rate of 6-gingerol was 3.21%, which was predicted by RSM. [Conclusion] The optimal process of supercritical carbon dioxide extraction of ginger essential oil was identified by singlefactor experiments and response surface method. The present study provides a satisfactory method for purifying GEO from ginger for industrial purpose.

A Comparative Study on Chemical Composition of Supercritical CO_2 Extraction Products in Peels of Trichosanthes kirilowii Maxim. from Changqing District

[Objective] This study aimed to investigate the differences in chemical composition of supercritical CO2 extraction products in peels of Trichosanthes kirilowii Maxim. from Changqing district. [Method] Supercritical fluidextraction （SFE） and GCMS method were applied to determine and analyze the chemical components of the extracts in peels of three strains of Trichosanthes kirilowii Maxim. [Result] The chemical components of supercritical CO2 extraction products in peels of three strains of Trichosanthes kirilowii Maxim. varied., and the number of chemical components with normalized percentage content higher than 1% was 5, 7 and 8, respectively. There are 14 kinds of common components, and the relative content of hexadecanoic acid was the highest. [Conclusion] Supercritical CO2 extracts in peels of different strains of Trichosanthes kirilowii Maxim. contain different chemical components, providing scientific basis for breeding excellent varieties and the development and utilization of Trichosanthes kirilowii Maxim.

Effect of Allelochemicals of Chinese-fir root extracted by supercritical CO2 extraction on Chinese fir

Allelochemicals of Chinese-fir root was extracted by technology of supercritical CO2 extraction under orthogonal experiment design, and it was used to analyze allelopathic activity of Chinese-fir through bioassay of seed germination. The results showed that as to the available rate of allelochemicals, the pressure and temperature of extraction were the most important factors. The allelochemicals of Chinese-fir root extracted by pure CO2 and ethanol mixed with CO2 have different allelopathic activities to seed germination, and the allelochemicals extracted by ethanol mixed with CO2 had stronger inhibitory effects on seed germination than that extracted by pure CO2.

Extraction of Perilla Seed Oil Using Supercritical Carbon Dioxide and GC-MS Analysis

[Objective] This study was aimed to determine the optimal parameters for the extraction of perilla seed oil to obtain high-quality perilla seed oil and analyze its compositions. [Method] In this study, perilla seed oil was extracted using supercritical CO2 （SC-CO2）. The effects of extraction time, temperature and pressure were investigated by single-factor experiments and orthogonal array testing （ORT）. The chemical compositions of extracted perilla seed oil were investigated by GC-MS. [Result] The optimal conditions for the extraction of perilla seed oil using SC-CO2 were extraction time of 4 h, extraction temperature at 40 ℃, and extraction pressure at 23 MPa. Under these conditions, the extraction yield of perilla seed oil was maximized to 12.43%. GC-MS analysis revealed that perilla seed oil was a complex mixture containing 76.183% α-linolenic acid. [Conclusion] Supercritical CO2 extraction was proven to be an effective technology to extract oil from perilla seed, and GCMS was also a satisfactory method for analyzing the compositions of perilla seed oil.

Isolation and Extraction of Total Flavonoids from Epimedium Koreanum Nakai by Supercritical Fluid Extraction

In the present paper is reported the method for the isolation and extraction of total flavonoids of Epimedium Koreanum Nakai by means of supercritical fluid extraction(SFE). By examining pressure, temperature, amounts of modifier and extraction time, the optimized condition of SFE is confirmed as 30 MPa and 60 ℃, with 70% ethanol as the modifier. The samples were statically extracted for 30 min, followed by dynamic extraction for 120 min at a flow rate of 6 mL/min. The quantitative analysis of total flavonoids was performed by UV-Vis spectrophotometry. Compared with the conventional method, the SFE method is more efficient, more rapid and more friendly environmentally.

Supercritical Fluid Extraction of Total Flavonoids from Leaves of Acanthopanax Senticosus Harms

The herbal plant Acanthopanax Senticosus Harms is natural herb of Changbaishan in Jilin Province of China, which belongs to the Araliaceae family. As the ingredients of folk medicine, it has long been used to treat a variety of human diseases, such as cerebrovascular disease, diabetes, tumor, isochemic heart diseases, hypertension, rheumatic arthritis, etc. E2,33. Flavonoids, a class of constituent compounds, which have a broad distribution in the nature and are found in Acanthopanax Senticosus Harms, have gained particular attention. A number of studies have shown that flavonoid compounds have wide biological activities, such as anti-aging, anticancer, anti-HIV,

Production of De-asphalted Oil and Fine Asphalt Particles by Supercritical Extraction

A continuous three-stage supercritical fluid extraction (SFE) process with a capacity of 1.0kg.h^-1 was setup to extract petroleum residue by pentane to obtain more oil for further upgrading. A discharging system integrated to the bottom of the extractor was used to recover solvent as gas while asphalt was obtained as fine particles. The influence of operating conditions on the yield and quality of extracts, i.e., deasphalted oil (DAO) and resin, was studied in the range of temperature 150-220℃, pressure of 4.0-6.0 MPa and the mass ratio of solvent to oil feed (S/O) 2.5-5.0. The particle size distribution, apparent forms and the packing density, which vary with operating pressure, were measured. The particle structures were observed by SEM as well. With the modification to conventional processes, furnace can be eliminated for solvent recovery from asphalt phase, so as to reduce energy consumption.

Experimental optimization and mathematical modeling of supercritical carbon dioxide extraction of essential oil from Pogostemon cablin

The supercritical carbon dioxide extraction was applied to obtain essential oil from Pogostemon cablin in this work.Effect of extraction parameters including temperature,pressure,extraction time and particle size on extraction yield was investigated,and the response surface methodology with a Box–Behnken Design was used to achieve the optimized extraction conditions.The maximum yield of essential oil was 2.4356%under the conditions of extraction temperature 47°C,pressure 24.5 MPa and extraction time 119 min.Moreover,based on the Brunauer–Emmett–Teller theory of adsorption,a mathematical modeling was performed to correlate the measured data.The model shows a function relationship between extraction yield and time by a simple equation with three significantly adjustable parameters.These model parameters have been optimized through simulated annealing algorithm.The predicted data from the mathematical model show a good agreement with the experimental data of the different extraction parameters.

Metal Ions Extraction with Glucose Derivatives as Chelating Reagents in Supercritical Carbon Dioxide

A series of glucose derivatives have been used as chelating reagents to extract metal ions in supercritical carbon dioxide. With perfluoro-l-octanesulfonic acid tetraethylammonium salt as additive, glucose derivatives were selective for Sr^2＋ and Pb^2＋ extraction in supercritical carbon dioxide.

Supercritical Fluid Extraction of Saponins from Ginseng

Introduction Ginseng（ Panax ginseng C. A. Meyer, Araliaceae） is one of the most valuable Chinese crude drugs and has been used widely for over 2000 years. Studies have demonstrated that ginseng can act on the central nervous system, the cardiovascular system and the endocrine system; it can enhance immune function and metabolism; it possesses a biomodulation action, anticancer effect, anti-stress and anti-ageing activities, and so on.

Supercritical Fluid Extraction of a Novel Template from Mesoporous Zirconia and the Effect on Porous Structure

Mesoporous zirconia was synthesized by a new and simple method. Zirconium n-propoxide was used as the zirconium source. A small, inexpensive nonsurfactant, triethanolamine, was used as the template. The template was removed by thermal treatment in air and supercritical fluid extraction using CO2. The structure of the resulting materials was characterized by X-ray diffraction, transmission electron microscopy, and N2 adsorption-desorption analyses. The materials are found to have narrowly distributed average pore diameters and wormhole-like pore channels. However, higher surface area and larger pore volume are exhibited after supercritical fluid extraction with CO2. The removal of the template by thermal treatment also leads to condensation and mild shrinkage of the zirconia framework.

Extraction of cellulose with subcritical and Supercritical ethanol

Cotton cellulose was extracted with ethanol in sub-and supercritical states dynamically. The degree of conversion was 95.4% and the extract yield was 55.2% when cotton cellulose was non-isothermally extracted with ethanol from 20°C to 400°C. From an engineering standpoint, in the temperature range from 200°C to 320°C, the rate of extract formation could adequately be described by a second-order reaction kinetics equation with the activation energy of 105.3 kJ/mol and the pre-exponential factor of 3.53×107 s?1. With the non-isothermal experimental technique, it was possible to determine the kinetic parameters; conversion degree and extract yield by one experiment.

Supercritical fluid extraction of useful compounds from sage

A qualitative analysis of supercritical fluid extraction (SFE) of the medically useful compound, sage (Salvia officinalis) is presented in this study. Carbon dioxide was used as a supercritical solvent. Effects of operating conditions such as temperature, pressure, and extraction time were investigated. The effect of addition of cosolvents was also studied. The extracted useful compounds were identified and analyzed using GC-MS chromatography. The analysis of the extract obtained by SFE showed certain significant major compounds that are considered medically important. These major compounds are 1R-.alpha.-Pinene, D-Limonene, l-Camphene, and b-Pinene, and Eucalyptol. Although, there was no consistent trend with respect to the effect of the studied parameters on the composition of the extract, the selectivity of these major compounds are dependant on the operating conditions, manily the operating pressure. An increase in the pressure resulted in an increase in herb extraction yield;this is true for certain group of extracts, while the inverse is also true for other group of compounds. The effect of certain cosolvents on the extractability of sage showed a significant improvement of the yield of some particular constituents of sage.

Supercritical Carbon Dioxide Extraction of Andrographolide from Andrographis paniculata： Effect of the Solvent Flow Rate, Pressure, and Temperature

Andrographis paniculata Nees has been extensively used for traditional medicine and help against fever dysentery, diarrhoea, inflammation, and sore throat. In this study, andrographolide, the main component of this plant was extracted from the leaves of A. paniculata using supercritical carbon dioxide. The operating pressures were varied from 7.50 to 20MPa, the temperatures were varied from 30℃ to 60℃, and the flow rates were varied from 0.5 to 4ml.min^-1. The best extraction condition occurred at 10MPa, 40℃, and a flow rate of 2ml.min^-1 for a 3g sample of A. paniculata ground-dried leaves. The measured extraction rate was found to be about 0.0174g of andrographolide per gram of andrographolide present in the leaves per hour of operation. The future studies must focus on the interaction between the various operating parameters such as temperature, pressure, and flow rate of supercritical carbon dioxide.

Comparison of volatile and semivolatile compounds from commercial cigarette by supercritical fluid extraction and simultaneous distillation extraction

Supercritical carbon dioxide fluid extraction (SFE) was studied as a rapid method for extraction of volatile and semivolatile compounds of Chinese commercial cigarettes. The method was compared with simultaneous distillation and extraction (SDE). Temperature and pressure for the SFE were optimized. The extracts obtained by the two methods showed different characters in composition and represented differently the flavor characteristics of tobacco; compared to SDE, SFE can extract compounds within a shorter time and avoid the thermal degradation and solvent contamination of samples. The extracts by the two extraction methods are complementary for investigating the flavor characteristic of tobacco products.

Response Surface Optimization of Nigella glandulifera Freyn Seed Oil Yield by Supercritical Carbon Dioxide Extraction

Supercritical carbon dioxide （SC-CO2） extraction was employed to extract oil from Nigella glandulifera Freyn seed in this study. Response surface methodology （RSM） was applied to evaluate the effects of the process parameters （pressure, temperature, and CO2 flow rate） on oil yield of N. glandulifera seed. A Box-Behnken design was used to optimize the extraction parameters. The analysis of variance indicated that the linear coefficients of pressure and CO2 flow rate, the quadratic term coefficients of pressure and temperature and the interactions between pressure and temperature, as well as temperature and CO2 flow rate, had significant effects on the oil yield （P〈0.05）. The optimal conditions to obtain the maximum oil yield from N. glandulifera seed were pressure 30.84 MPa, temperature 40.57°C, and CO2 flow rate 22.00 L h-1. Under these optimal conditions, the yield of oil was predicted to be 38.19%. The validation experiment results agreed with the predicted values. The fatty acid composition of N. glandulifera seed oil extracted using SC-CO2 was compared with that of oil obtained by Soxhlet method. The results showed that the fatty acid compositions of oil extracted by the two methods were similar. Identification of oil compounds with gas chromatography-mass spectrometry （GC-MS） showed that the contents of unsaturated fatty acids linoleic acid （48.30%）, oleic acid （22.28%） and saturated fatty acids palmitic acid （16.65%）, stearic acid （4.17%） were the most abundant fatty acids in seed oil from N. glandulifera.