In the present study, physico-chemical investigations have been carried out on the possibility of using Cameroonian volcanic or clay pozzolans as raw material for geopolymer or pozzolanic binder. The research had made...In the present study, physico-chemical investigations have been carried out on the possibility of using Cameroonian volcanic or clay pozzolans as raw material for geopolymer or pozzolanic binder. The research had made some suggestive results and conclusions. Powders of less than 100 μm of five sampled pozzolans from volcanic or clay origins have been subjected to chemical and mineralogical analysis, BET specific surface, absolute density, granulometry and pozzolanic activity in solution tests. The results obtained showed that, geopolymers or pozzolanic binders can be produced from samples studied. The samples contain significant amounts of glassy or amorphous phase ready to dissolve in an alkaline solution. The high alkali content of volcanic pozzolans makes them more appropriate for geopolymer application. Clay pozzolans are the easier to grind in order to obtain the appropriate fineness and can be used for both geo- polymers and pozzolanic binders.展开更多
Chloride binding is often described by chloride binding isotherm, which is closely related to the service life of concrete structures in chloride environments. Many methods have been proposed to determine chloride bin...Chloride binding is often described by chloride binding isotherm, which is closely related to the service life of concrete structures in chloride environments. Many methods have been proposed to determine chloride binding isotherm. Compared to other methods, chloride binding isotherms obtained directly from non- steady-state diffusion tests seem closer to the reality. We studied the chloride binding isotherm from both non- steady-state electrical-accelerated migration and diffusion tests at different temperatures. Twelve concrete mixes with different supplementary cementing materials and water-to-binder ratios of 0.35, 0.48 and 0.6 were cast for study. The specimens after diffusion （or migration） tests were sliced layer by layer, and acid-soluble and free chloride contents of each layer were measured. A chloride binding isotherm was obtained from one specimen. Experimental results indicated that electrical voltage had a slight effect on the chloride binding isotherm of concrete. Temperature had a positive effect on chloride binding. The higher the water-to-binder ratio was, the higher the chloride binding was.展开更多
Advanced technological achievements and the continuous growth of economy have made the disposal, recycle and reuse of industrial by-products a severe challenge. The cement industry is considered one of the key sectors...Advanced technological achievements and the continuous growth of economy have made the disposal, recycle and reuse of industrial by-products a severe challenge. The cement industry is considered one of the key sectors in this effort in successfully （in terms of not extenuating but improving some of the properties of the final product） absorbing large quantities of solid wastes, either as aggregates or as secondary cementitious materials. This not only contributes to the creation of an energy and CO2-emission depository （as commonly used raw materials are spared）, but also simultaneously alleviates the acute environmental burden caused by the irresponsible disposal of such by-products. In this study, the possibility of reusing spent fluid catalytic-cracking catalyst （FCC） as a supplementary cementing material （SCM） was examined. A series of tests were conducted, initially aiming at characterizing the material and thereafter evaluating its pozzolanic activity and its effect on the mechanical properties of blended cements. Major findings in this investigation revealed that the use of FCC as a mineral admixture in cement is feasible, strengthening the belief that siliceous glassy residues should represent a steady supply for the construction sector.展开更多
文摘In the present study, physico-chemical investigations have been carried out on the possibility of using Cameroonian volcanic or clay pozzolans as raw material for geopolymer or pozzolanic binder. The research had made some suggestive results and conclusions. Powders of less than 100 μm of five sampled pozzolans from volcanic or clay origins have been subjected to chemical and mineralogical analysis, BET specific surface, absolute density, granulometry and pozzolanic activity in solution tests. The results obtained showed that, geopolymers or pozzolanic binders can be produced from samples studied. The samples contain significant amounts of glassy or amorphous phase ready to dissolve in an alkaline solution. The high alkali content of volcanic pozzolans makes them more appropriate for geopolymer application. Clay pozzolans are the easier to grind in order to obtain the appropriate fineness and can be used for both geo- polymers and pozzolanic binders.
基金Funded by Ghent University,Belgium and Central South University(No.2010QZZD018)
文摘Chloride binding is often described by chloride binding isotherm, which is closely related to the service life of concrete structures in chloride environments. Many methods have been proposed to determine chloride binding isotherm. Compared to other methods, chloride binding isotherms obtained directly from non- steady-state diffusion tests seem closer to the reality. We studied the chloride binding isotherm from both non- steady-state electrical-accelerated migration and diffusion tests at different temperatures. Twelve concrete mixes with different supplementary cementing materials and water-to-binder ratios of 0.35, 0.48 and 0.6 were cast for study. The specimens after diffusion （or migration） tests were sliced layer by layer, and acid-soluble and free chloride contents of each layer were measured. A chloride binding isotherm was obtained from one specimen. Experimental results indicated that electrical voltage had a slight effect on the chloride binding isotherm of concrete. Temperature had a positive effect on chloride binding. The higher the water-to-binder ratio was, the higher the chloride binding was.
文摘Advanced technological achievements and the continuous growth of economy have made the disposal, recycle and reuse of industrial by-products a severe challenge. The cement industry is considered one of the key sectors in this effort in successfully （in terms of not extenuating but improving some of the properties of the final product） absorbing large quantities of solid wastes, either as aggregates or as secondary cementitious materials. This not only contributes to the creation of an energy and CO2-emission depository （as commonly used raw materials are spared）, but also simultaneously alleviates the acute environmental burden caused by the irresponsible disposal of such by-products. In this study, the possibility of reusing spent fluid catalytic-cracking catalyst （FCC） as a supplementary cementing material （SCM） was examined. A series of tests were conducted, initially aiming at characterizing the material and thereafter evaluating its pozzolanic activity and its effect on the mechanical properties of blended cements. Major findings in this investigation revealed that the use of FCC as a mineral admixture in cement is feasible, strengthening the belief that siliceous glassy residues should represent a steady supply for the construction sector.
