Considering the stratum anti-drilling ability,drill bit working conditions,drill bit application effect and drill bit economic benefits,the similarity of stratum anti-drilling ability was evaluated by grey relational ...Considering the stratum anti-drilling ability,drill bit working conditions,drill bit application effect and drill bit economic benefits,the similarity of stratum anti-drilling ability was evaluated by grey relational analysis theory to screen out candidate drill bits with reference values.A new comprehensive performance evaluation model of drill bit was established by constructing the absolute ideal solution,changing the relative distance measurement method,and introducing entropy weight to work out the closeness between the candidate drill bits and ideal drill bits and select the reasonable drill bit.Through the construction of absolute ideal solution,improvement of relative distance measurement method and introduction of entropy weight,the inherent defects of TOPSIS decision analysis method,such as non-absolute order,reverse order and unreasonable weight setting,can be overcome.Simple in calculation and easy to understand,the new bit selection method has good adaptability to drill bit selection using dynamic change drill bit database.Field application has proved that the drill bits selected by the new drill bit selection method had significant increase in average rate of penetration,low wear rate,and good compatibility with the drilled formations in actual drilling.This new method of drill bit selection can be used as a technical means to select drill bits with high efficiency,long life and good economics in oilfields.展开更多
Purpose–Material selection,driven by wide and often conflicting objectives,is an important,sometimes difficult problem in material engineering.In this context,multi-criteria decision-making(MCDM)methodologies are eff...Purpose–Material selection,driven by wide and often conflicting objectives,is an important,sometimes difficult problem in material engineering.In this context,multi-criteria decision-making(MCDM)methodologies are effective.An approach of MCDM is needed to cater to criteria of material assortment simultaneously.More firms are now concerned about increasing their productivity using mathematical tools.To occupy a gap in the previous literature this research recommends an integrated MCDM and mathematical Bi-objective model for the selection of material.In addition,by using the Technique for Order Preference by Similarity to Ideal Solution(TOPSIS),the inherent ambiguities of decision-makers in paired evaluations are considered in this research.It goes on to construct a mathematical bi-objective model for determining the best item to purchase.Design/methodology/approach–The entropy perspective is implemented in this paper to evaluate the weight parameters,while the TOPSIS technique is used to determine the best and worst intermediate pipe materials for automotive exhaust system.The intermediate pipes are used to join the components of the exhaust systems.The materials usually used to manufacture intermediate pipe are SUS 436LM,SUS 430,SUS 304,SUS 436L,SUH 409 L,SUS 441 L and SUS 439L.These seven materials are evaluated based on tensile strength(TS),hardness(H),elongation(E),yield strength(YS)and cost(C).A hybrid methodology combining entropy-based criteria weighting,with the TOPSIS for alternative ranking,is pursued to identify the optimal design material for an engineered application in this paper.This study aims to help while filling the information gap in selecting the most suitable material for use in the exhaust intermediate pipes.After that,the authors searched for and considered eight materials and evaluated them on the following five criteria:(1)TS,(2)YS,(3)H,(4)E and(5)C.The first two criteria have been chosen because they can have a lot of influence on the behavior of the exhaust intermediate pipes,on their performance and on the cost.In this structure,the weights of the criteria are calculated objectively through the entropy method in order to have an unbiased assessment.This essentially measures the quantity of information each criterion contribution,indicating the relative importance of these criteria better.Subsequently,the materials were ranked using the TOPSIS method in terms of their relative performance by measuring each material from an ideal solution to determine the best alternative.The results show that SUS 309,SUS 432L and SUS 436 LM are the first three materials that the exhaust intermediate pipe optimal design should consider.Findings–The material matrix of the decision presented in Table 3 was normalized through Equation 5,as shown in Table 5,and the matrix was multiplied with weighting criteriaß_j.The obtained weighted normalized matrix V_ij is presented in Table 6.However,the ideal,worst and best value was ascertained by employing Equation 7.This study is based on the selection of material for the development of intermediate pipe using MCDM,and it involves four basic stages,i.e.method of translation criteria,screening process,method of ranking and search for methods.The selection was done through the TOPSIS method,and the criteria weight was obtained by the entropy method.The result showed that the top three materials are SUS 309,SUS 432L and SUS 436 LM,respectively.For the future work,it is suggested to select more alternatives and criteria.The comparison can also be done by using different MCDM techniques like and Choice Expressing Reality(ELECTRE),Decision-Making Trial and Evaluation Laboratory(DEMATEL)and Preference Ranking Organization Method for Enrichment Evaluation(PROMETHEE).Originality/value–The results provide important conclusions for material selection in this targeted application,verifying the employment of mutual entropy-TOPSIS methodology for a series of difficult engineering decisions in material engineering concepts that combine superior capacity with better performance as well as cost-efficiency in various engineering design.展开更多
In recent years,the great interest in Wireless Body Area Networks(WBANs)has been aroused significantly due to the advancement in wireless communications.In wireless communication,all WBAN nodes that monitor the human ...In recent years,the great interest in Wireless Body Area Networks(WBANs)has been aroused significantly due to the advancement in wireless communications.In wireless communication,all WBAN nodes that monitor the human body's vital functions transfer information to a central sink node,which is directly connected to a Cognitive Radio enabled Controller called CRC.To transfer this information from a CRC to an e-health server,it requires long-range wireless networks,such as UMTS,LTE,WiMAX,WiFi,and satellite internet provider.It is challenging for a CRC to select the best networks for different WBAN data traffic,such as emergency mandatory,delay sensitive,and general monitoring.This paper proposes a scheme for selecting the best network from the available networks depending on the Quality of Service(QoS)requirements for different WBAN applications.Different multiple attribute decision-making algorithms are used in the proposed scheme.Numerical results and discussion reveal that the proposed scheme is effective in making a good network selection in situations where there is a conflict among different QoS requirements for different WBAN applications.展开更多
Greenway is a green linear corridor connecting scenic spots, residential areas, nature reserves, road traffic, etc. Rational greenway route selection can not only attract tourists to increase the income of local villa...Greenway is a green linear corridor connecting scenic spots, residential areas, nature reserves, road traffic, etc. Rational greenway route selection can not only attract tourists to increase the income of local villages, but also arouse people’s awareness of the protection of traditional villages. This paper took Xingtai County, Hebei Province, China as an example to practice greenway route selection in the county territory. Eight factors were selected for greenway route planning, namely elevation, water body, mountain, ecological protection redline, cultural relics protection units, population density, road traffic network, and important transportation hub. These eight factors were assigned in the GIS platform, and the suitability evaluation system of each factor was constructed. The analytic hierarchy process (AHP) and entropy weight method were combined to calculate the weight of these eight factors. The raster calculator was used to weight and overlay the suitability evaluation system of each factor, and the comprehensive suitability evaluation map of greenway route selection was obtained. Based on an important transport hub, along with the water body and the road traffic, the final selection greenway route of traditional villages in Xingtai county was formed. The results of the research can provide a certain reference for the greenway route selection at the county scale.展开更多
基金Supported by China National Science and Technology Major Project(2016ZX05020-006)。
文摘Considering the stratum anti-drilling ability,drill bit working conditions,drill bit application effect and drill bit economic benefits,the similarity of stratum anti-drilling ability was evaluated by grey relational analysis theory to screen out candidate drill bits with reference values.A new comprehensive performance evaluation model of drill bit was established by constructing the absolute ideal solution,changing the relative distance measurement method,and introducing entropy weight to work out the closeness between the candidate drill bits and ideal drill bits and select the reasonable drill bit.Through the construction of absolute ideal solution,improvement of relative distance measurement method and introduction of entropy weight,the inherent defects of TOPSIS decision analysis method,such as non-absolute order,reverse order and unreasonable weight setting,can be overcome.Simple in calculation and easy to understand,the new bit selection method has good adaptability to drill bit selection using dynamic change drill bit database.Field application has proved that the drill bits selected by the new drill bit selection method had significant increase in average rate of penetration,low wear rate,and good compatibility with the drilled formations in actual drilling.This new method of drill bit selection can be used as a technical means to select drill bits with high efficiency,long life and good economics in oilfields.
文摘Purpose–Material selection,driven by wide and often conflicting objectives,is an important,sometimes difficult problem in material engineering.In this context,multi-criteria decision-making(MCDM)methodologies are effective.An approach of MCDM is needed to cater to criteria of material assortment simultaneously.More firms are now concerned about increasing their productivity using mathematical tools.To occupy a gap in the previous literature this research recommends an integrated MCDM and mathematical Bi-objective model for the selection of material.In addition,by using the Technique for Order Preference by Similarity to Ideal Solution(TOPSIS),the inherent ambiguities of decision-makers in paired evaluations are considered in this research.It goes on to construct a mathematical bi-objective model for determining the best item to purchase.Design/methodology/approach–The entropy perspective is implemented in this paper to evaluate the weight parameters,while the TOPSIS technique is used to determine the best and worst intermediate pipe materials for automotive exhaust system.The intermediate pipes are used to join the components of the exhaust systems.The materials usually used to manufacture intermediate pipe are SUS 436LM,SUS 430,SUS 304,SUS 436L,SUH 409 L,SUS 441 L and SUS 439L.These seven materials are evaluated based on tensile strength(TS),hardness(H),elongation(E),yield strength(YS)and cost(C).A hybrid methodology combining entropy-based criteria weighting,with the TOPSIS for alternative ranking,is pursued to identify the optimal design material for an engineered application in this paper.This study aims to help while filling the information gap in selecting the most suitable material for use in the exhaust intermediate pipes.After that,the authors searched for and considered eight materials and evaluated them on the following five criteria:(1)TS,(2)YS,(3)H,(4)E and(5)C.The first two criteria have been chosen because they can have a lot of influence on the behavior of the exhaust intermediate pipes,on their performance and on the cost.In this structure,the weights of the criteria are calculated objectively through the entropy method in order to have an unbiased assessment.This essentially measures the quantity of information each criterion contribution,indicating the relative importance of these criteria better.Subsequently,the materials were ranked using the TOPSIS method in terms of their relative performance by measuring each material from an ideal solution to determine the best alternative.The results show that SUS 309,SUS 432L and SUS 436 LM are the first three materials that the exhaust intermediate pipe optimal design should consider.Findings–The material matrix of the decision presented in Table 3 was normalized through Equation 5,as shown in Table 5,and the matrix was multiplied with weighting criteriaß_j.The obtained weighted normalized matrix V_ij is presented in Table 6.However,the ideal,worst and best value was ascertained by employing Equation 7.This study is based on the selection of material for the development of intermediate pipe using MCDM,and it involves four basic stages,i.e.method of translation criteria,screening process,method of ranking and search for methods.The selection was done through the TOPSIS method,and the criteria weight was obtained by the entropy method.The result showed that the top three materials are SUS 309,SUS 432L and SUS 436 LM,respectively.For the future work,it is suggested to select more alternatives and criteria.The comparison can also be done by using different MCDM techniques like and Choice Expressing Reality(ELECTRE),Decision-Making Trial and Evaluation Laboratory(DEMATEL)and Preference Ranking Organization Method for Enrichment Evaluation(PROMETHEE).Originality/value–The results provide important conclusions for material selection in this targeted application,verifying the employment of mutual entropy-TOPSIS methodology for a series of difficult engineering decisions in material engineering concepts that combine superior capacity with better performance as well as cost-efficiency in various engineering design.
文摘In recent years,the great interest in Wireless Body Area Networks(WBANs)has been aroused significantly due to the advancement in wireless communications.In wireless communication,all WBAN nodes that monitor the human body's vital functions transfer information to a central sink node,which is directly connected to a Cognitive Radio enabled Controller called CRC.To transfer this information from a CRC to an e-health server,it requires long-range wireless networks,such as UMTS,LTE,WiMAX,WiFi,and satellite internet provider.It is challenging for a CRC to select the best networks for different WBAN data traffic,such as emergency mandatory,delay sensitive,and general monitoring.This paper proposes a scheme for selecting the best network from the available networks depending on the Quality of Service(QoS)requirements for different WBAN applications.Different multiple attribute decision-making algorithms are used in the proposed scheme.Numerical results and discussion reveal that the proposed scheme is effective in making a good network selection in situations where there is a conflict among different QoS requirements for different WBAN applications.
文摘Greenway is a green linear corridor connecting scenic spots, residential areas, nature reserves, road traffic, etc. Rational greenway route selection can not only attract tourists to increase the income of local villages, but also arouse people’s awareness of the protection of traditional villages. This paper took Xingtai County, Hebei Province, China as an example to practice greenway route selection in the county territory. Eight factors were selected for greenway route planning, namely elevation, water body, mountain, ecological protection redline, cultural relics protection units, population density, road traffic network, and important transportation hub. These eight factors were assigned in the GIS platform, and the suitability evaluation system of each factor was constructed. The analytic hierarchy process (AHP) and entropy weight method were combined to calculate the weight of these eight factors. The raster calculator was used to weight and overlay the suitability evaluation system of each factor, and the comprehensive suitability evaluation map of greenway route selection was obtained. Based on an important transport hub, along with the water body and the road traffic, the final selection greenway route of traditional villages in Xingtai county was formed. The results of the research can provide a certain reference for the greenway route selection at the county scale.
