Photocatalytic degradation of L- acid by TiO_2 supported on the activated carbon

TiO2 sol was prepared by sol-gel technique with tetrabutyl titanate as precursor. Supported TiO2 catalysts on activated carbon were prepared by soak and sintering method. The aggregation of nano-TiO2 particles can be effectively suppressed by added polyethylene glycol （PEG） as a surface modifier. The average particle diameter of TiO2, specific surface area and absorbability of catalyst can be modified. Based on characteristics of the TiO2 photocatalyst with XRD, specific surface area, adsorption valves of methylene blue and the amount of TiO2 supported on the activated carbon, the photocatalytic degradation of L-acid was studied. The effect of the factors, such as pH of the solution, the initial concentration of L-acid on the photocatalytic degradation of L-acid, were studied also. It was found that when the pH of the solution is 1.95, the amount of photocatalyst is 0.5 g, the concentration of the L-acid solution is 1.34×10^3 mol/L and the illumination time is 7 h, the photocatalytic degradation efficiency of L-acid can reach 89,88%, The catalyst was reused 6 times and its degradation efficiency hardly changed.

An Effective Novel ReactionSystem For The Photo Degradation of Aqueous Organic Pollutants

A novel reaction system consisted of a supported TiO2 film electrode, a Ru?Ti oxide film electrode and air (oxygen) electrode is reported. The air (oxygen) electrode can provide H2O2 continuously for homogeneous photochemical oxidation reaction on the spot. In this reactor, degradation reaction of aniline occur from interface of TiO2 film to all solution which is irradiated by ultraviolet ray. The degradation rate of aniline was characterized by measuring the change of chemical oxygen demand (COD) in solution under different conditions. It was found that the degradation rate of aniline in the novel system increased apparently as compared with single heterogeneous photocatalysis and homogeneous photochemistry system. It can be explained in terms of combining acts of heterogeneous photocatalysis and homogeneous photochemistry.

Influence of supports on photocatalytic degradation of phenol and 4-chlorophenol in aqueous suspensions of titanium dioxide

The photocatalytic degradation of phenol and 4-chlorophenol （4-CP） in aqueous suspensions with the use of titanium dioxide （TiO2 ） under UV irradiation was examined. The effects of different supporting materials mixed physically with TiO2 were studied to achieve maximum degradation efficiency. Among the three supports, namely activated carbon （AC）, silica （SiO2 ） and zeolite （ZSM-5）, all exhibited paramount efficiency for degradation of phenol and 4-CP and was better than TiO2 alone. The optimum concentration was found to be 50 mg for all supporting materials. The efficiency order of the three supports was as follows： AC 〉 ZSM-5 〉 SiO2 , respectively. Whilst, the degradation of phenol and 4-CP was improved from 70.6% to 87.6% and 80.6% to 89.7%, respectively, within 120 min photocatalysis in the presence of optimal amount of AC. The degradation was also comparatively enhanced in the presence of cheaper rice husk and the activity was closed to ZSM-5 and lower than AC.