CALCULATION OF ELASTIC DAMPING CHARACTERISTICS OF ROTOR SUPPORT MADE OF METAL RUBBER MATERIAL UNDER VARIABLE LOADS

A metal rubber（MR） dry friction damper was designed based on the load supported by the rotor. An experimental apparatus for obtaining hysteresis loops of support under the precession load was designed. The elastic-damping characteristics of the ring-shaped MR damper used as a rotor support under variable loads were presented by studying the hysteresis loops of the damper. The vibration rigidity and the energy dissipation coefficient were calculated from the hysteresis loops, based on the description of the deformation process of the MR element with simple structure in a dimensionless coordinating system. The calculation results showed that the energy dissipation coefficient in the inner of MR element and on the boundary between the damper and the frame of the rotor support were approximately equal. The comparison of the hysteresis loops for a precession load and a one-axial load indicated a large difference when the coefficient of the energy dissipation and the stiffness of the MR damper were concerned.

Research on the Interstitial Fluid Load Support Characteristics and Start-Up Friction Mechanisms of PVA-HA-Silk Composite Hydrogel

Hydrogel has been extensively studied as an articular cartilage repair and replacement material. PVA-HA-Silk composite hydrogel was prepared by freezing-thawing method in this paper. Mechanical properties were determined by experiments and the friction coefficient of PVA-HA-Silk composite hydrogel against steel ball was verified using micro-tribometer. Finite Element Method （FEM） was used to study the lubrication mechanism of PVA-HA-Silk composite hydrogel and the relation between the interstitial fluid load support and the start-up friction resistance. The results show that the elastic modulus and the permeability are 2.07 MPa and 10^-15m^4N^-1s^-1, respectively, and the start-up friction coefficients of PVA-HA-Silk composite hydrogel are in the range of 0.154）.2 at different contact loads, contact time and sliding speeds. The start-up friction resistance of PVA-HA-Silk composite hydrogel increases with the contact load and contact time. With the increase in sliding speed, the start-up friction resistance of PVA-HA-Silk composite hydrogel decreases. There is an inverse relation between the start-up friction resistance and the interstitial fluid load support. The change of fluid flow with the increase in sliding displacement has an important effect on the interstitial fluid load support and friction resistance. The interstitial fluid load support decreases with the increase in contact load and contact time, while the interstitial fluid load support reinforces with the increase in sliding speed. Moreover, PVA-HA-Silk composite hydrogel has mechanical properties of recovery and self-lubricating.

BENDING OF ORTHOTROPIC SANDWICH PLATES WITH A FUNCTIONALLY GRADED CORE SUBJECTED TO DISTRIBUTED LOADINGS

Based on the Reissner assumptions, this paper is concerned with the bending analy- sis of simply supported sandwich plates with functionally graded core and orthotropic face sheets subjected to transverse distributed loadings. First, the expressions of the displacements, stresses and internal forces of the sandwich plate are presented according to the constitutive relations and stress states of the core and face sheets. Then, the solutions of bending equilibrium equa- tions are derived by expanding the deflection w, transverse shearing forces Q~ and Qv with double trigonometric series that satisfy the simply supported boundary conditions. Finally, the proposed solution is validated by comparing the results with available elasticity solutions for a square sand- wich plate with an isotropie core and finite element simulations for one with functionally graded core. The Young＇s modulus of the functionally graded core is assumed to be graded by a power law distribution of volume fractions of the constituents, and the Poisson＇s ratio is held constant. And the effects of the core＇s top-bottom Young＇s modulus ratio A and volume fraction exponent no on the variation of the displacements of the functionally graded sandwich plate are also examined.