Surface Passivation Toward Efficient and Stable Perovskite Solar Cells

Although metal halide perovskites are increasingly popular for the next generation of efficient photovoltaic devices,the inevitable defects from the preparation process have become the notorious barrier to further improvement of performance,which increases non-radiative recombination and lowers the power conversion efficiency of solar cells.Surface passivation strategies have been affirmed as one of the most practical approaches to suppress these defects.Therefore,it is necessary to have a detailed review on the surface passivation to reveal the improvements of the devices.Herein,the mechanism and recent advances of surface passivation have been systematically summarized with respect to various passivation approaches,including the Lewis acid–base,the low-dimensional perovskite,inorganic molecules,and polymers.Finally,the review also offers the research trend and prospects of surface passivation.

Impact of Surface Passivation on the Electronic Structure and Optical Properties of the Si1-xGex Nanowires

The electronic structures and optical properties of the [llO]-oriented Sil-xGex nanowires （NWs） passivated with different functional groups （-H, -F and-OH） are investigated by using first-principles calculations. The results show that surface passivation influences the characteristics of electronic band structures significantly： the band gap widths and types （direct or indirect） of the Si1-xGe, NWs with different terminators show complex and robust variations, and the effective masses of the electrons in the NWs can be modulated dramatically by the terminators. The study of optical absorption shows that the main peaks of the parallel polarization component of Si1-x Gex NWs passivated with the functional groups exhibit prominent changes both in height and position, and are red-shifted with respect to those of corresponding pure Si NWs, indicating the importance of both the terminators and Ge concentrations. Our results demonstrate that the electronic and optical properties of Si1-xGex NWs can be tuned by utilizing selected functional groups as well as particular Ge concentrations for customizing purposes.

Recent Progress of Surface Passivation Molecules for Perovskite Solar Cell Applications

Due to the solution processable nature,the prepared perovskite films are polycrystalline with considerable number of defects.These defects,especially defects at interface accelerate the carrier recombination and reduce the carrier collection.Besides,the surface defects also affect the long-term stability of the perovskite solar cells(PVSCs).To solve this problem,surface passivation molecules are introduced at selective interface(the interface between perovskite and carrier selective layer).This review summarizes recent progress of small molecules used in PVSCs.Firstly,different types of defect states in perovskite films are introduced and their effects on device performance are discussed.Subsequently,surface passivation molecules are divided into four categories,and the interaction between the functional groups of the surface passivation molecules and selective defect states in perovskite films are highlighted.Finally,we look into the prospects and challenges in design noble small molecules for PVSCs applications.

Crystalline silicon surface passivation investigated by thermal atomic-layer-deposited aluminum oxide

Atomic-layer-deposited（ALD） aluminum oxide（Al2O3） has demonstrated an excellent surface passivation for crystalline silicon（c-Si） surfaces, as well as for highly boron-doped c-Si surfaces. In this paper, water-based thermal atomic layer deposition of Al2O3 films are fabricated for c-Si surface passivation. The influence of deposition conditions on the passivation quality is investigated. The results show that the excellent passivation on n-type c-Si can be achieved at a low thermal budget of 250℃ given a gas pressure of 0.15 Torr. The thickness-dependence of surface passivation indicates that the effective minority carrier lifetime increases drastically when the thickness of Al2O3 is larger than 10 nm. The influence of thermal post annealing treatments is also studied. Comparable carrier lifetime is achieved when Al2O3 sample is annealed for 15 min in forming gas in a temperature range from 400℃ to 450℃. In addition, the passivation quality can be further improved when a thin PECVD-SiNx cap layer is prepared on Al2O3, and an effective minority carrier lifetime of2.8 ms and implied Voc of 721 mV are obtained. In addition, several novel methods are proposed to restrain blistering.

Efficiency enhancement of Cs_(0.1)(CH_(3)NH_(3))_(0.9)PbI_(3) perovskite solar cell by surface passivation using iso-butyl ammonium iodide

Efficiency enhancement of Cs_(0.1)(CH_(3)NH_(3))_(0.9)PbI_(3) solar cell devices was performed by using iso-butyl ammonium iodide(IBA)passivated on Cs_(0.1)(CH_(3)NH_(3))_(0.9)PbI_(3) films.The n-i-p structure of perovskite solar cell devices was fabricated with the structure of FTO/SnO_(2)/Cs_(0.1)(CH_(3)NH_(3))_(0.9)PbI_(3)(FTO,i.e.,fluorine doped tin oxide)and IBA/Spiro-OMeTAD/Ag.The effect of different weights of IBA passivated on Cs-doped perovskite solar cells(PSCs)was systematically investigated and compared with non-passivated devices.It was found that the 5-mg IBA-passivated devices exhibited a high power conversion efficiency(PCE)of 15.49%higher than 12.64%of non-IBA-passivated devices.The improvement of photovoltaic parameters of the 5-mg IBA-passivated device can be clearly observed compared to the Cs-doped device.The better performance of the IBA-passivated device can be confirmed by the reduction of PbI_(2) phase in the crystal structure,lower charge recombination rate,lower charge transfer resistance,and improved contact angle of perovskite films.Therefore,IBA passivation on Cs_(0.1)(CH_(3)NH)_(0.9)PbI_(3) is a promising technique to improve the efficiency of Cs-doped perovskite solar cells.

Enhanced efficiency and stability in Sn-based perovskite solar cells by trimethylsilyl halide surface passivation

Lead free tin perovskite solar cells(PKSCs)are the most suitable alternative candidate for conventional lead perovskite solar cells.However,the efficiency and the stability are insufficient,mainly because of the poor film quality and numerous defects.Here we introduce an efficient strategy based on a simple trimethylsilyl halide surface passivation to increase the film quality and reduce the defect density.At the same time,a hydrophobic protective layer on the perovskite surface is formed,which enhanced the PKSCs’stability.The efficiency of the solar cell after the passivation was enhanced from 10.05%to 12.22%with the improved open-circuit voltage from 0.57 V to 0.70 V.In addition,after 92 days of storage in N_(2) filled glovebox,the modified T-PKSCs demonstrated high stability maintaining 80%of its initial efficiency.This work provides a simple and widely used strategy to optimize the surface/interface optoelectronic properties of perovskites for giving more efficient and stable solar cells and other optoelectronic devices.

Performance enhancement of solution-processed InZnO thin-film transistors by Al doping and surface passivation

Solution-processed oxide semiconductors have been considered as a potential alternative to vacuum-based ones in printable electronics.However,despite spincoated InZnO(IZO)thin-film transistors(TFTs)have shown a relatively high mobil-ity,the lack of carrier suppressor and the high sensitivity to oxygen and water molecules in ambient air make them potentially suffer issues of poor stability.In this work,Al is used as the third cation doping element to study the effects on the electrical,optoelectronic,and physical properties of IZO TFTs.A hydrophobic self-assembled monolayer called octadecyltrimethoxysilane is introduced as the surface passivation layer,aiming to reduce the effects from air and understand the importance of top surface conditions in solution-processed,ultra-thin oxide TFTs.Owing to the reduced trap states within the film and at the top surface enabled by the doping and passivation,the optimized TFTs show an increased current on/off ratio,a reduced drain current hysteresis,and a significantly enhanced bias stress stability,compared with the untreated ones.By combining with high-capacitance AlO_(x),TFTs with a low operating voltage of 1.5 V,a current on/off ratio of>10^(4) and a mobility of 4.6 cm^(2)/(V·s)are demonstrated,suggesting the promising features for future low-cost,low-power electronics.

Surface Passivation of Nanocrystalline Silicon Powder Derived from Cryomilling

The surface passivation mechanism of nanocrystalline silicon powder was studied. The liquid nitrogen/argon was used as the medium to prepare the nanocrystalline silicon powder, using a cryomilling technology. The X-ray diffraction, transmission electron microscopy, plasma emission spectroscopy and infrared spectrum were used to analyze the prepared samples, and density functional theory was used to investigate the cryomilling process. For nanocrystalline silicon powder cryomilled with liquid N2, the amorphous outer layer with N element is formed On the surface, and chemisorption caused by the formation of Si-N-Si bond leads to the surface passivation; although physisorpfion also he confirmed, the Si-N bond is steady after exploded in air for 30 days and no new bond is observed. For nanocrystalline silicon powder cryomilled with liquid At, no new chemical bond is Observed, Ar element absorbs on the surface of the prepared powder only through physisorption, and after exploded in air for 30 days, a Si-O bond can be observed obviously.

Boosting efficiency and stability of 2D alternating cation perovskite solar cells via rational surface-modification: Marked passivation efficacy of anion

Two-dimensional(2D) alternating cation(ACI) perovskite surface defects,especially dominant iodine vacancies(V_Ⅰ) and undercoordinated Pb^(2+),limit the performance of perovskite solar cells(PVSCs).To address the issue,1-butyl-3-methylimidazolium trifluoro-methane-sulfonate(BMIMOTF) and its iodide counterpart(BMIMI) are utilized to modify the perovskite surface respectively.We find that BMIMI can change the perovskite surface,whereas BMIMOTF shows a nondestructive and more effective defect passivation,giving significantly reduced defect density and suppressed charge-carrier nonradiative recombination.This mainly attributes to the marked passivation efficacy of OTF-anion on V_Ⅰ and undercoordinated Pb^(2+),rather than BMIMI^(+) cation.Benefiting from the rational surface-modification of BMMIMOTF,the films exhibit an optimized energy level alignment,enhanced hydrophobicity and suppressed ion migration.Consequently,the BMIMOTF-modified devices achieve an impressive efficiency of 21.38% with a record open-circuit voltage of 1.195 V,which is among the best efficiencies reported for 2D PVSCs,and display greatly enhanced humidity and thermal stability.

Improved efficiency and stability of inverse perovskite solar cells via passivation cleaning

Amidst the global energy and environmental crisis,the quest for efficient solar energy utilization intensifies.Perovskite solar cells,with efficiencies over 26%and cost-effective production,are at the forefront of research.Yet,their stability remains a barrier to industrial application.This study introduces innovative strategies to enhance the stability of inverted perovskite solar cells.By bulk and surface passivation,defect density is reduced,followed by a"passivation cleaning"using Apacl amino acid salt and isopropyl alcohol to refine film surface quality.Employing X-ray diffraction(XRD),scanning electron microscope(SEM),and atomic force microscopy(AFM),we confirmed that this process effectively neutralizes surface defects and curbs non-radiative recombination,achieving 22.6%efficiency for perovskite solar cells with the composition Cs_(0.15)FA_(0.85)PbI_(3).Crucially,the stability of treated cells in long-term tests has been markedly enhanced,laying groundwork for industrial viability.

Analyzing the surface passivity effect of germanium oxynitride:a comprehensive approach through first principles simulation and interface state density

High-purity germanium(HPGe)detectors,which are used for direct dark matter detection,have the advantages of a low threshold and excellent energy resolution.The surface passivation of HPGe has become crucial for achieving an extremely low energy threshold.In this study,first-principles simulations,passivation film preparation,and metal oxide semiconductor(MOS)capacitor characterization were combined to study surface passivation.Theoretical calculations of the energy band structure of the -H,-OH,and -NH_(2) passivation groups on the surface of Ge were performed,and the interface state density and potential with five different passivation groups with N/O atomic ratios were accurately analyzed to obtain a stable surface state.Based on the theoretical calculation results,the surface passivation layers of the Ge_(2)ON_(2) film were prepared via magnetron sputtering in accordance with the optimum atomic ratio structure.The microstructure,C-V,and I-V electrical properties of the layers,and the passivation effect of the Al/Ge_(2)ON_(2)/Ge MOS were characterized to test the interface state density.The mean interface state density obtained by the Terman method was 8.4×10^(11) cm^(-2) eV^(-1).The processing of germanium oxynitrogen passivation films is expected to be used in direct dark matter detection of the HPGe detector surface passivation technology to reduce the detector leakage currents.

Surface Treatment of Inorganic CsPbI_(3) Nanocrystals with Guanidinium Iodide for Efficient Perovskite Light-Emitting Diodes with High Brightness

The remarkable evolution of metal halide perovskites in the past decade makes them promise for next-generation optoelectronic material.In particular,nanocrystals(NCs)of inorganic perovskites have demonstrated excellent performance for light-emitting and display applications.However,the presence of surface defects on the NCs negatively impacts their performance in devices.Herein,we report a compatible facial post-treatment of CsPbI_(3) nanocrystals using guanidinium iodide(GuI).It is found that the GuI treatment effectively passivated the halide vacancy defects on the surface of the NCs while offering effective surface protection and exciton confinement thanks to the beneficial contribution of iodide and guanidinium cation.As a consequence,the film of treated CsPbI_(3) nanocrystals exhibited significantly enhanced luminescence and charge transport properties,leading to high-performance light-emitting diode with maximum external quantum efficiency of 13.8%with high brightness(peak luminance of 7039 cd m^(−2) and a peak current density of 10.8 cd A^(−1)).The EQE is over threefold higher than performance of untreated device(EQE:3.8%).The operational half-lifetime of the treated devices also was significantly improved with T50 of 20 min(at current density of 25 mA cm^(−2)),outperforming the untreated devices(T50~6 min).

High efficiency CZTSSe solar cells enabled by dual Ag-passivation approach via aqueous solution process

Ag substitution in Cu_(2)ZnSn(S,Se)_(4)(CZTSSe)is a promising way to mitigate Cu/Zn related defects,electrostatic fluctuations and Shockley-Read-Hall(SRH)recombination centers.However,high performance ACZTSSe solar cells are generally demonstrated with more Ag amounts and strenuous fabrication processes,which are not ideal when using cheap constituent materials CZTSSe.To reduce the Ag amount(2%-3%),local Ag substitutions into CZTSSe at front(F),back(B)and dual front/back(FB)were proposed.Experimental results revealed that F-passivation effectively reduced the Cu/Zn related defects and further limits the interface/bulk recombination whereas B-passivation improved the grain growth at the back interface and further allows enhanced transport of charge carriers.By employing the dual Agpassivation approach,the final ACZTSSe device parameters were significantly improved and remarkable power conversion efficiency(PCE)of 12.43%was achieved with eco-friendly aqueous solution process.

Imposing Active Sources during High-Frequency Passive Surface-Wave Measurement

Passive surface-wave utilization has been intensively studied as a means of compensating for the short-age of low-frequency information in active surface-wave measurement, In general, passive surface-wave methods cannot provide phase velocities up to several tens of hertz; thus, active surface-wave methods are often required in order to increase the frequency range, To reduce the amount of field work, we pro-pose a strategy for a high-frequency passive surface-wave survey that imposes active sources during con-tinuous passive surface-wave observation; we call our strategy ＂mixed-source surface-wave （MSW） measurement,＂ Short-duration （within 10 min） passive surface waves and mixed-source surface waves were recorded at three sites with different noise levels： namely, inside a school, along a road, and along a railway, Spectral analysis indicates that the high-frequency energy is improved by imposing active sources during continuous passive surface-wave observation, The spatial autocorrelation （SPAC） method and the multichannel analysis of passive surface waves （MAPS） method based on cross-correlations were performed on the recorded time sequences, The results demonstrate the flexibility and applicability of the proposed method for high-frequency phase velocity analysis, We suggest that it will be constructive to perform MSW measurement in a seismic investigation, rather than exclusively performing either active surface-wave measurement or passive surface-wave measurement,

Sodium Nitrate Passivation as a Novel Insulation Technology for Soft Magnetic Composites

Sodium nitrate passivation has been developed as a new insulation technology for the production of FeSiAl soft magnetic composites (SMCs). In this work, the evolution of coating layers grown at different pH values is investigated involving analyses on their composition and microstructure. An insulation coating obtained using an acidic NaNO_(3) solution is found to contain Fe2O_(3), SiO_(2), Al2O_(3), and AlO(OH). The Fe2O_(3) transforms into Fe3O4 with weakened oxidizability of the NO_(3)– at an elevated pH, whereas an alkaline NaNO_(3) solution leads to the production of Al2O_(3), AlO(OH), and SiO_(2). Such growth is explained from both thermodynamic and kinetic perspectives and is correlated to the soft magnetic properties of the FeSiAl SMCs. Under tuned passivation conditions, optimal performance with an effective permeability of 97.2 and a core loss of 296.4 mW∙cm−3 is achieved at 50 kHz and 100 mT.

Monitoring of CO_2 geological storage based on the passive surface waves

Carbon dioxide （CO2） capture and geological storage （CCS） is one of promising technologies for greenhouse gas effect mitigation. Many geotechnical challenges remain during carbon dioxide storage field practices, among which effectively detecting CO2 from deep underground is one of engineering problems. This paper reviews monitoring techniques currently used during CO2 injection and storage. A method developed based on measuring seismic microtremors is of main interest. This method was first successfully used to characterize a site in this paper. To explore its feasibility in C02 storage monitoring, numerical simulations were conducted to investigate detectable changes in elastic wave signatures due to injection and geological storage of CO2. It is found that, although it is effective for shallow earth profile estimation, the surface wave velocity is not sensitive to the CO2 layer physical parameter variations,especially for a thin CO2 geological storage layer in a deep underground reservoir.

Surface Leakage Currents in SiN and Al_2O_3 Passivated AlGaN/GaN High Electron Mobility Transistors

Surface leakage currents of A1GaN/GaN high electron mobility transistors are investigated by utilizing a circular double-gate structure to eliminate the influence of mesa leakage current. Different mechanisms are found under various passivation conditions. The mechanism of the surface leakage current with AI2 03 passivation follows the two-dimensional variable range hopping model, while the mechanism of the surface leakage current with SiN passivation follows the Frenkel-Poole trap assisted emission. Two trap levels are found in the trap-assisted emission. One trap level has a barrier height of 0.22eV for the high electric field, and the other trap level has a barrier height of 0.12eV for the low electric field.

Organic ligand nanoarchitectonics for BiVO_(4) photoanodes surface passivation and cocatalyst grafting

Bismuth vanadate(BiVO_(4))is a promising photoanode material for efficient photoelectrochemical(PEC)water splitting,whereas its performance is inhibited by detrimental surface states.To solve the problem,herein,a low-cost organic molecule 1,3,5-benzenetricarboxylic acid(BTC)is selected for surface passivation of BiVO_(4) photoanodes(BVOs),which also provides bonding sites for Co^(2+)to anchor,resulting in a Co-BTC-BVO photoanode.Owing to its strong coordination with metal ions,BTC not only passivates surface states of BVO,but also provides bonding between BVO and catalytic active sites(Co^(2+))to form a molecular cocatalyst.Computational study and interfacial charge kinetic investigation reveal that chemical bonding formed at the interface greatly suppresses charge recombination and accelerates charge transfer.The obtained Co-BTC-BVO photoanode exhibits a photocurrent density of 4.82 mA/cm^(2) at 1.23 V vs.reversible hydrogen electrode(RHE)and a low onset potential of 0.22 VRHE under AM 1.5 G illumination,which ranks among the best photoanodes coupled with Co-based cocatalysts.This work presents a novel selection of passivation layers and emphasizes the significance of interfacial chemical bonding for the construction of efficient photoanodes.

High photoluminescence Ag-In-Ga-S quantum dots based on ZnX_(2)-treated surface passivation

Quaternary Ag-In-Ga-S(AIGS)quantum dot(QD)is considered a promising,spectral-tunable,and environmentally friendly luminescent display material.However,the more complex surface defect states of AIGS QDs resulting from the coexistence of multiple elements lead to a low(<60%)photoluminescence quantum yield(PLQY).Here,we develop a novel convenient method to introduce Z-type ligands ZnX_(2)(X=Cl,Br,I)for passivating the surface defects of AIGS QDs to dramatically enhance the PLQY and stability without affecting the crystalline structure and morphology.Results show that the addition of ZnCl_(2) during the purified process of AIGS QDs leads to a 3-fold increase of PLQY(from 28.5% to 87%).Impressively,the highest PLQY is up to a recorded value of 92%,which is comparable to typical heavy metal QDs.Exciton dynamics studies have shown that the rapid annihilation process of excitons in treated QDs is inhibited.We also confirm that the improvement in PLQY is a result of the effective passivation of the non-coordinating atom on the QD surface by building a new bonding between sulfur dangling and Zn2+.The realization of high PLQY will further promote the application of AIGS QDs in luminescent displays.

Inorganic surface passivation strategies of metal halide perovskites

Metal halide perovskites have demonstrated considerable promise across various optoelectronic applications.Surface passivation serves as a pivotal strategy to obtain high‐quality perovskite materials,either in a manner of bulk thin film or nanocrystal,with superior optoelectronic properties and stability.The current research focus in this regard primarily revolves around the use of organic molecules to passivate the surface of perovskites.However,organic passivation molecules always suffer from chemical instability and weak sec-ondary bonding modes,resulting in an unstable surface passivation motif.Inorganic materials,possessing more stable chemical structures and stronger chemical bonding than their organic counterparts,offer the opportunities to construct more robust passivation for the perovskite surfaces.Herein,in this review,we summarized and assessed recent advancements in inorganic sur-face passivation strategies for perovskite materials and devices,ranging from nanocrystals to bulk films.By discussing the mechanisms behind various inorganic passivation strategies,we aim to offer mechanistic insights and guidelines for future developments of more targeted surface passivation ap-proaches tailored for perovskite materials and devices.