Surface Modelling and Mesh Generation for Simulating Superplastic Forming

This paper presents an approach which enables surface modelling, mesh generation and the Finite Element (FE) analysis to be integrated together to simulate superplastic forming process for complex shaped components. Techniques have been developed to generate an FE mesh over non-four-sided surface areas, the boundaries of which are Bezier curves of arbitrary degree, using a consistent expression. Theoretical evidence is given to determine the number of Bezier triangular patches required for accurately re-constructing die surfaces within a commercial FE solver. The developed techniques have been successfully used in determining the process parameters for forming a 3D rectangular box.

Elucidating Dominant Factors Affecting Land Surface Hydrological Simulations of the Community Land Model over China

In order to compare the impacts of the choice of land surface model(LSM)parameterization schemes,meteorological forcing,and land surface parameters on land surface hydrological simulations,and explore to what extent the quality can be improved,a series of experiments with different LSMs,forcing datasets,and parameter datasets concerning soil texture and land cover were conducted.Six simulations are run for the Chinese mainland on 0.1°×0.1°grids from 1979 to 2008,and the simulated monthly soil moisture(SM),evapotranspiration(ET),and snow depth(SD)are then compared and assessed against observations.The results show that the meteorological forcing is the most important factor governing output.Beyond that,SM seems to be also very sensitive to soil texture information;SD is also very sensitive to snow parameterization scheme in the LSM.The Community Land Model version 4.5(CLM4.5),driven by newly developed observation-based regional meteorological forcing and land surface parameters(referred to as CMFD_CLM4.5_NEW),significantly improved the simulations in most cases over the Chinese mainland and its eight basins.It increased the correlation coefficient values from 0.46 to 0.54 for the SM modeling and from 0.54 to 0.67 for the SD simulations,and it decreased the root-mean-square error(RMSE)from 0.093 to 0.085 for the SM simulation and reduced the normalized RMSE from 1.277 to 0.201 for the SD simulations.This study indicates that the offline LSM simulation using a refined LSM driven by newly developed observation-based regional meteorological forcing and land surface parameters can better model reginal land surface hydrological processes.

Experiments in numerical modelling of the Pacific sea surface temperature anomalies

By using the atmosphere-ocean coupled model (CGCM) which is composed of a 2-level global atmospheric general circulation model and a 4-layer Pacific oceanic general circulation model developed in the Institute of Atmospheric Physics of Chinese Academy of Sciences, and two model climatological fields got from the two independent models' numerical integrations respectively, the Pacific sea surface temperature anomalies (SSTA) from 1988 to 1989 are simulated in this paper with observed atmospheric general circulation data and sea surface temperature fields as initial conditions and monthly coupling scheme. In order to remove systematic biases of the model climatological fields, interaction variables between atmosphere and ocean are also corrected simultaneously. The experiments show that the simulation results can be improved effectively if these interaction variables are corrected in spite of the fact that there always exist systematic biases in independent numerical simulations of atmospheric part and oceanic part within CGCM. The basic characteristics of the observed Pacific SSTA in September and October 1988 have been simulated by using the correction scheme, such as the negative SSTA domain in the whole E-quatorial Pacific east to 150°E and the positive SSTA domain in the Western Pacific, the northern subtropical Pacific and nearly the whole Southern Pacific. Further numerical simulations show that the model can simulate not only the SSTA in the Pacific and its seasonal variations but also its interannual changes (for example, La Nino event in the Equatorial Pacific terminated after May 1989) to a certain degree. Furthermore, some problems existing in experiment processes and what we shoud do in the following stage are also discussed and analysed in this paper.

Soil-water characteristic surface model of soil-rock mixture

The relationship between the water content or saturation of unsaturated soils and its matrix suction is commonly described by the soilwater characteristic curve(SWCC).Currently,study on the SWCC model is focused on fine-grained soils like clay and silty soils,but the SWCC model for grinding soil-rock mixture(SRM)is less studied.Considering that the SRM is in a certain compaction state in the actual project,this study established a surface model with three variables of coupling compaction degree-substrate suction-moisture content based on the Cavalcante-Zornberg soil-water characteristic curve model.Then,the influence of each fitting parameter on the curve was analyzed.For the common SRM,the soil-water characteristic test was conducted.Moreover,the experimental measurements exhibit remarkable consistency with the mode surface.The analysis shows that the surface model intuitively describes the soil-water characteristics of grinding SRM,which can provide the SWCC of soils with bimodal pore characteristics under specific compaction degrees.Furthermore,it can reflect the influence of compaction degrees on the SWCC of rock-soil mass and has a certain prediction effect.The SWCC of SRM with various soil-rock ratios have a double-step shape.With the increase in compaction degree,the curves as a whole tend toward decreasing mass moisture content.The curve changes are mainly concentrated in the large pore section.

An accurate analytical surface potential model of heterojunction tunnel FET

Based on the accurate and efficient thermal injection method, we develop a fully analytical surface potential model for the heterojunction tunnel field-effect transistor(H-TFET). This model accounts for both the effects of source depletion and inversion charge, which are the key factors influencing the charge, capacitance and current in H-TFET. The accuracy of the model is validated against TCAD simulation and is greatly improved in comparison with the conventional model based on Maxwell–Boltzmann approximation. Furthermore, the dependences of the surface potential and electric field on biases are well predicted and thoroughly analyzed.

Analysis of Remotely Sensed Imagery and Architecture Environment for Modelling 3D Detailed Buildings Using Geospatial Techniques

The use of three-dimensional maps is more effective than two-dimensional maps in representing the Earth’s surface. However, the traditional methods used to create digital surface models are not efficient for capturing the details of Earth’s features. This is because they represent only three-dimensional objects in a single texture and do not provide a realistic representation of the real world. Additionally, there is a growing demand for up-to-date and accurate geo-information, particularly in urban areas. To address this challenge, a new technique is proposed in this study that involves integrating remote sensing, Geographic Information System, and Architecture Environment software to generate a highly-detailed three-dimensional model. The method described in this study includes several steps such as acquiring high-resolution satellite imagery, gathering ground truth data, performing radiometric and geometric corrections during image preprocessing, producing a 2D map of the region of interest, constructing a digital surface model by extending the building outlines, and transforming the model into multi-patch layers to create a 3D model for each object individually. The research findings indicate that the digital surface model obtained with comprehensive information is suitable for different purposes, such as environmental research, urban development and expansion planning, and shape recognition tasks.

Integrating Highly Spatial Satellite Image for 3D Buildings Modelling Using Geospatial Algorithms and Architecture Environment

The growing demand for current and precise geographic information that pertains to urban areas has given rise to a significant interest in digital surface models that exhibit a high level of detail. Traditional methods for creating digital surface models are insufficient to reflect the details of earth’s features. These models only represent three-dimensional objects in a single texture and fail to offer a realistic depiction of the real world. Furthermore, the need for current and precise geographic information regarding urban areas has been increasing significantly. This study proposes a new technique to address this problem, which involves integrating remote sensing, Geographic Information Systems (GIS), and Architecture Environment software environments to generate a detailed three-dimensional model. The processing of this study starts with: 1) Downloading high-resolution satellite imagery; 2) Collecting ground truth datasets from fieldwork; 3) Imaging nose removing; 4) Generating a Two-dimensional Model to create a digital surface model in GIS using the extracted building outlines; 5) Converting the model into multi-patch layers to construct a 3D model for each object separately. The results show that the 3D model obtained through this method is highly detailed and effective for various applications, including environmental studies, urban development, expansion planning, and shape understanding tasks.

Surfel-based surface modeling for robotic belt grinding simulation

The new flee-form surface modelling technology for robotic belt grinding simulation presented in this paper is based on discrete surfel elements generated from the surface approximation point set and can facilitate the simulation implementation. A local process model exploits the advantage of surfel representation to compute the material removal rate and the final surface grinding error can be easily carried out. With the help of this system, robot programmers can improve the path planning and predict potential problems by visualizing the manufacturing process.

Modeling of multiphase flow in low permeability porous media:Effect of wettability and pore structure properties

Multiphase flow in low permeability porous media is involved in numerous energy and environmental applications.However,a complete description of this process is challenging due to the limited modeling scale and the effects of complex pore structures and wettability.To address this issue,based on the digital rock of low permeability sandstone,a direct numerical simulation is performed considering the interphase drag and boundary slip to clarify the microscopic water-oil displacement process.In addition,a dual-porosity pore network model(PNM)is constructed to obtain the water-oil relative permeability of the sample.The displacement efficiency as a recovery process is assessed under different wetting and pore structure properties.Results show that microscopic displacement mechanisms explain the corresponding macroscopic relative permeability.The injected water breaks through the outlet earlier with a large mass flow,while thick oil films exist in rough hydrophobic surfaces and poorly connected pores.The variation of water-oil relative permeability is significant,and residual oil saturation is high in the oil-wet system.The flooding is extensive,and the residual oil is trapped in complex pore networks for hydrophilic pore surfaces;thus,water relative permeability is lower in the water-wet system.While the displacement efficiency is the worst in mixed-wetting systems for poor water connectivity.Microporosity negatively correlates with invading oil volume fraction due to strong capillary resistance,and a large microporosity corresponds to low residual oil saturation.This work provides insights into the water-oil flow from different modeling perspectives and helps to optimize the development plan for enhanced recovery.

A Land Surface Model(IAP94) for Climate Studies PartI:Formulation and Validation in Off-line Experiments

The IAP (Institute of Atmospheric Physics) land-surface model (IAP94) is described. This model is a comprehensive one with detailed description for the processes of vegetation, snow and soil. Particular attention has been paid to the cases with three water phases in the surface media. On the basis of the mixture theory and the theory of fluid dynamics of porous media, the system of universal conservational equations for water and heat of soil, snow and vegetation canopy has been constructed. On this background, all important factors that may affect the water and heat balance in media can be considered naturally, and each factor and term possess distinct physical meaning. In the computation of water content and temperature, the water phase change and the heat transportation by water flow are taken into account. Moreover, particular attention has been given to the water vapor diffusion in soil for arid or semi-arid cases, and snow compaction. In the treatment of surface turbulent fluxes, the difference between aerodynamic and thermal roughness is taken into account. The aerodynamic roughness of vegetation is calculated as a function of canopy density, height and zero-plane displacement. An extrapolation of log linear and exponential relationship is used when calculating the wind profile within canopy. The model has been validated against field measurements in off-line simulations. The desirable model′s performance leads to the conclusion that the IAP94 is able to reproduce the main physical mechanisms governing the energy and water balances in the global land surface. Part II of the present study will concern the validation in a 3-D experiment coupled with the IAP Two-Level AGCM.

Applications of a Surface Runoff Model with Horton and Dunne Runoff for VIC

Surface runoff is mainly generated by two mechanisms, infiltration excess (Horton) runoff and saturation excess (Dunne) runoff; and the spatial variability of soil properties, antecedent soil moisture, topography, and rainfall will result in different surface runoff generation mechanisms. For a large area (e.g., a model grid size of a regional climate model or a general circulation model), these runoff generation mechanisms are commonly present at different portions of a grid cell simultaneously. Missing one of the two major runoff generation mechanisms and failing to consider spatial soil variability can result in significant under/over estimation of surface runoff which can directly introduce large errors in soil moisture states over each model grid cell. Therefore, proper modeling of surface runoff is essential to a reasonable representation of feedbacks in a land-atmosphere system. This paper presents a new surface runoff parameterization with the Philip infiltration formulation that dynamically represents both the Horton and Dunne runoff generation mechanisms within a model grid cell. The parameterization takes into account the effects of soil heterogeneity on Horton and Dunne runoff. The new parameterization is implemented into the current version of the hydrologically based Variable Infiltration Capacity (VIC) land surface model and tested over one watershed in Pennsylvania, USA and over the Shiguanhe Basin in the Huaihe Watershed in China. Results show that the new parameterization plays a very important role in partitioning the water budget between surface runoff and soil moisture in the atmosphere-land coupling system, and has potential applications on large hydrological simulations and land-atmospheric interactions. It is further found that the Horton runoff mechanism should be considered within the context of subgrid-scale spatial variability of soil properties and precipitation.

Three-Dimensional Geometrical Modelling of Wild Boar Head by Reverse Engineering Technology

In this paper, a wild boar head was taken as the bionic research object for the development of new ridgers, a kind of plough. The reverse engineering technology was adopted to obtain the surface geometrical information of the head. Several three-dimensional （3D） point clouds of the head were captured first using a non-touch laser scanner, and an integrated point cloud was generated by aligning these point clouds using UG/Imageware. Then, the digital surface model of the head was rebuilt by means of CATIA. The characteristic curves of the surface model were analyzed. The results show that the average error between the rebuilt surface and the point cloud is -0.431 ram. The max curvature of the ridge on the neb of the head is 0.187 mm^-1, and the max and rain Gauss curvatures on the surface are 0.008 mm^-2 and -0.002 mm^-2. These geometrical information are the essential parameters for biomimetics study of the ridger.

Enhancement Factors in Ozone Absorption Based on the Surface Renewal Model and its Application

Based on the Danckwerts surface renewal model, a simple explicit expression of the enhancement factor in ozone absorption with a first order ozone self-decomposition and parallel second order ozonation reactions has been derived. The results are compared with our previous work based on the film theory. The 2,4-dichlorophenol destruction rate by ozonation is predicted using the enhancement factor model in this paper.

Road Surface Modeling and Representation from Point Cloud Based on Fuzzy Clustering

A scheme for an automatic road surface modeling from a noisy point cloud is presented. The normal vectors of the point cloud are estimated by distance-weighted fitting of local plane. Then, an automatic recognition of the road surface from noise is performed based on the fuzzy clustering of normal vectors, with which the mean value is calculated and the projecting plane of point cloud is created to obtain the geometric model accordingly. Based on fuzzy clustering of the intensity attributed to each point, different objects on the road surface are assigned different colors for representing abundant appearances. This unsupervised method is demonstrated in the experiment and shows great effectiveness in reconstructing and rendering better road surface.

Impact of Spin-up Forcing on Vegetation States Simulated by a Dynamic Global Vegetation Model Coupled with a Land Surface Model

A dynamic global vegetation model （DGVM） coupled with a land surface model （LSM） is generally initialized using a spin-up process to derive a physically-consistent initial condition. Spin-up forcing, which is the atmospheric forcing used to drive the coupled model to equilibrium solutions in the spin-up process, varies across earlier studies. In the present study, the impact of the spin-up forcing in the initialization stage on the fractional coverages （FCs） of plant functional type （PFT） in the subsequent simulation stage are assessed in seven classic climate regions by a modified Community Land Model’s Dynamic Global Vegetation Model （CLM-DGVM）. Results show that the impact of spin-up forcing is considerable in all regions except the tropical rainforest climate region （TR） and the wet temperate climate region （WM）. In the tropical monsoon climate region （TM）, the TR and TM transition region （TR-TM）, the dry temperate climate region （DM）, the highland climate region （H）, and the boreal forest climate region （BF）, where FCs are affected by climate non-negligibly, the discrepancies in initial FCs, which represent long-term cumulative response of vegetation to different climate anomalies, are large. Moreover, the large discrepancies in initial FCs usually decay slowly because there are trees or shrubs in the five regions. The intrinsic growth timescales of FCs for tree PFTs and shrub PFTs are long, and the variation of FCs of tree PFTs or shrub PFTs can affect that of grass PFTs.

Effects of Crop Growth and Development on Land Surface Fluxes

In this study, the Crop Estimation through Resource and Environment Synthesis model （CERES3.0） was coupled into the Biosphere-Atmosphere Transfer Scheme （BATS）, which is called BATS CERES, to represent interactions between the land surface and crop growth processes. The effects of crop growth and development on land surface processes were then studied based on numerical simulations using the land surface models. Six sensitivity experiments by BATS show that the land surface fluxes underwent substantial changes when the leaf area index was changed from 0 to 6 m2 m-2. Numerical experiments for Yucheng and Taoyuan stations reveal that the coupled model could capture not only the responses of crop growth and development to environmental conditions, but also the feedbacks to land surface processes. For quantitative evaluation of the effects of crop growth and development on surface fluxes in China, two numerical experiments were conducted over continental China： one by BATS CERES and one by the original BATS. Comparison of the two runs shows decreases of leaf area index and fractional vegetation cover when incorporating dynamic crops in land surface simulation, which lead to less canopy interception, vegetation transpiration, total evapotranspiration, top soil moisture, and more soil evaporation, surface runoff, and root zone soil moisture. These changes are accompanied by decreasing latent heat flux and increasing sensible heat flux in the cropland region. In addition, the comparison between the simulations and observations proved that incorporating the crop growth and development process into the land surface model could reduce the systematic biases of the simulated leaf area index and top soil moisture, hence improve the simulation of land surface fluxes.

Trend surface analysis of forest landscape pattern in Guandishan forest region of Shanxi,China

Landscape pattern is a widely used concept for the demonstration of landscape characteristic features. The integral spatial distribution trend of landscape elements is interested point in the landscape ecological research, especially in those of complex secondary forest regions with confusing mosaics of land cover. Trend surface analysis which used in community and population ecological researches was introduced to reveal the landscape pattern. A reasonable and reliable approach for application of trend surface analysis was provided in detail. As key steps of the approach, uniform grid point sampling method was developed. The efforts were also concentrated at an example of Guandishan forested landscape. Some basic rules of spatial distribution of landscape elements were exclaimed. These will be benefit to the further study in the area to enhance the forest sustainable management and landscape planning.

Mapping Near-surface Air Temperature, Pressure, Relative Humidity and Wind Speed over China's Mainland with High Spatiotemporal Resolution

As part of a joint effort to construct an atmospheric forcing dataset for China's Mainland with high spatiotemporal reso- lution, a new approach is proposed to construct gridded near-surface temperature, relative humidity, wind speed and surface pressure with a resolution of 1 km× 1 km. The approach comprises two steps： （1） fit a partial thin-plate smoothing spline with orography and reanalysis data as explanatory variables to ground-based observations for estimating a trend surface; （2） apply a simple kriging procedure to the residual for trend surface correction. The proposed approach is applied to observations collected at approximately 700 stations over China's Mainland. The generated forcing fields are compared with the corresponding components of the National Centers for Environmental Predic- tion （NCEP） Climate Forecast System Reanalysis dataset and the Princeton meteorological forcing dataset. The comparison shows that, both within the station network and within the resolutions of the two gridded datasets, the interpolation errors of the proposed approach are markedly smaller than the two gridded datasets.

Case Analyses and Numerical Simulation of Soil ThermalImpacts on Land Surface Energy Budget Based on anOff-Line Land Surface Model

The statistical relationship between soil thermal anomaly and short-term climate change is presented based on a typical case study. Furthermore, possible physical mechanisms behind the relationship are re-vealed through using an off-line land surface model with a reasonable soil thermal forcing at the bottom of the soil layer. In the first experiment, the given heat flux is 5 W m2 at the bottom of the soil layer (in depth of 6.3 m) for 3 months, while only a positive ground temperature anomaly of 0.06°C can be found compared to the control run. The anomaly, however, could reach 0.65°C if the soil thermal conductivity was one order of magnitude larger. It could be even as large as 0.81°C assuming the heat flux at bottom is 10 W m-2. Mean-while, an increase of about 10 W m−2 was detected both for heat flux in soil and sensible heat on land sur-face, which is not neglectable to the short-term climate change. The results show that considerable response in land surface energy budget could be expected when the soil thermal forcing reaches a certain spatial-tem-poral scale. Therefore, land surface models should not ignore the upward heat flux from the bottom of the soil layer. Moreover, integration for a longer period of time and coupled land-atmosphere model are also necessary for the better understanding of this issue.

A New Approach for Parameter Optimization in Land Surface Model

In this study,a new parameter optimization method was used to investigate the expansion of conditional nonlinear optimal perturbation （CNOP） in a land surface model （LSM） using long-term enhanced field observations at Tongyu station in Jilin Province,China,combined with a sophisticated LSM （common land model,CoLM）.Tongyu station is a reference site of the international Coordinated Energy and Water Cycle Observations Project （CEOP） that has studied semiarid regions that have undergone desertification,salination,and degradation since late 1960s.In this study,three key land-surface parameters,namely,soil color,proportion of sand or clay in soil,and leaf-area index were chosen as parameters to be optimized.Our study comprised three experiments：First,a single-parameter optimization was performed,while the second and third experiments performed triple-and six-parameter optimizations,respectively.Notable improvements in simulating sensible heat flux （SH）,latent heat flux （LH）,soil temperature （TS）,and moisture （MS） at shallow layers were achieved using the optimized parameters.The multiple-parameter optimization experiments performed better than the single-parameter experminent.All results demonstrate that the CNOP method can be used to optimize expanded parameters in an LSM.Moreover,clear mathematical meaning,simple design structure,and rapid computability give this method great potential for further application to parameter optimization in LSMs.