Fiber cladding dual channel surface plasmon resonance sensor based on S-type fiber

Fiber cladding surface plasmon resonance(SPR)sensors have few structures,and a clad SPR sensor based on S-type fiber is proposed in this paper.This new type of fiber cladding SPR sensor was formed by electrofusing an S-shaped structure on the fiber to couple the light in the fiber core to the cladding.In this paper,the effects of fiber parameters on the performance of the sensor were studied by simulation and experiment.Based on the conclusion that the smaller the core diameter is,the closer the working band of the SPR resonance is to long wavelengths,and that the geometric characteristics mean that a multimode fiber can receive the fiber cladding light from a small core diameter few-mode fiber,a dual channel SPR sensor with a double S-type fiber cascade was proposed.In the refractive index detection range of 1.333–1.385refractive index units(RIU),the resonant working band of channel I is 627.66 nm–759.78 nm,with an average sensitivity of 2540.77 nm/RIU,and the resonant working band of channel II is 518.24 nm–658.2 nm,with an average sensitivity of2691.54 nm/RIU.The processing method for the S-type fiber cladding SPR sensor is simple,effectively solving the problem of this type of SPR sensor structure and the difficult realization of a dual channel.The sensor is expected to be used in the fields of medical treatment and biological analysis.

Dual-channel fiber-optic surface plasmon resonance sensor with cascaded coaxial dual-waveguide D-type structure and microsphere structure

To address the restriction of fiber-optic surface plasmon resonance(SPR) sensors in the field of multi-sample detection, a novel dual-channel fiber-optic SPR sensor based on the cascade of coaxial dual-waveguide D-type structure and microsphere structure is proposed in this paper. The fiber sidepolishing technique converts the coaxial dual-waveguide fiber into a D-type one, and the evanescent wave in the ring core leaks, generating a D-type sensing region;the fiber optic fused ball push technology converts the coaxial dual waveguides into microspheres, and the stimulated cladding mode evanescent wave leaks, producing the microsphere sensing region. By injecting light into the coaxial dual-waveguide middle core alone, the sensor can realize single-stage sensing in the microsphere sensing area;it can also realize dual-channel sensing in the D-type sensing area and microsphere sensing area by injecting light into the ring core. The refractive index measurement ranges for the two channels are 1.333–1.365 and 1.375–1.405, respectively, with detection sensitivities of 981.56 nm/RIU and 4138 nm/RIU. The sensor combines wavelength division multiplexing and space division multiplexing technologies, presenting a novel research concept for multi-channel fiber SPR sensors.

Numerical simulation of a truncated cladding negative curvature fiber sensor based on the surface plasmon resonance effect

A refractive index(RI)sensor based on the surface plasmon resonance effect is proposed using a truncated cladding negative curvature fiber(TC-NCF).The influences of the TC-NCF structure parameters on the sensing performances are investigated and compared with the traditional NCF.The simulation results show that the proposed TC-NCF RI sensor has an ultra-wide detection range from 1.16 to 1.43.The maximum wavelength sensitivity reaches 12400 nm/RIU,and the corresponding R^(2)of the polynomial fitting equation is 0.9999.The maximum and minimum resolutions are 2.56×10^(-5)and 8.06×10^(-6),respectively.In addition,the maximum amplitude sensitivity can reach-379.1 RIU^(-1)when the RI is chosen as 1.43.The proposed TC-NCF RI sensor could be useful in biochemical medicine,environmental monitoring,and food safety.

Facile fabrication of large-area hierarchical plasmonic cavities with broadband plasmon resonance for enhanced photocatalytic hydrogen evolution

Integrating hierarchical plasmonic cavities into photocatalysis offers a promising avenue for expanding the light utilization range to cover the entire solar spectrum. However, fabricating these nanostructures with seamless size transitions for a wide plasmon resonant range remains technically challenging, requiring precise nanofabrication control and often relying on expensive and laborious techniques like e-beam lithography and reactive ion etching. Herein, a one-step forming strategy was explored to fabricate simple yet hierarchical plasmonic cavities featuring the surface nanodome array-integrated plasmonic Fabry–Pérot cavity through a facile large-area nanoimprinting method. This design leverages a uniform feature size and periodic arrangement to broaden the light utilization range of TiO_(2) across the entire solar spectrum (200–2500 nm). It consists of an upper nanodome array cavity with vertically continuous graded sizes for broadband absorption (200–1500 nm), coupled with a bottom plate cavity that enlarges the overall cavity size to extend the range to 2500 nm. Remarkably, simply adjusting the thickness of the plate cavity can tune the resonant position, eliminating the need for expensive mold modifications. When combined with TiO_(2), this hierarchical plasmonic cavity significantly enhances the photocatalytic hydrogen evolution rate to 36.3 µmol/h, achieving a remarkable 9.8-fold increase compared to pure TiO_(2) under full-spectrum illumination. This approach offers a convenient and inexpensive alternative to sophisticated nanofabrication techniques for large-area hierarchical plasmonic cavities with broadband plasmon resonance to enhance the photocatalytic hydrogen evolution.

Surface plasmon resonance-induced visible-light photocatalytic performance of silver/silver molybdate composites

Novel silver/silver molybdate（Ag/Ag2MoO4） composites with surface plasmon resonance（SPR）-enhanced photocatalytic performance were successfully fabricated via a facile one-pot hydrothermal route with the presence of sodium dodecyl sulfate（SDS） in this study.The as prepared silver/silver molybdate（Ag/Ag2MoO4） composites were systematically characterized by X-ray diffraction（XRD）,scanning electron microscopy（SEM） and ultraviolet-visible diffuse reflectance absorption spectroscopy（DRS） in order to investigate their crystal structure,morphology and optical property as well.The photocatalytic activities of the composites were subsequently evaluated by their ability to degrade rhodamine B（RhB） under visible-light irradiation.Varies of controlled experiments were then carefully operated to gain a deep insight into the assembling of Ag/Ag2MoO4composites.It was found that preparation conditions such as pH,reaction time,and the amount of surfactant played important roles in the formation of composites with octahedral microstructures.And the composite obtained at 160 ℃ using 0.5 g of sodium dodecyl sulfate exhibited the highest photocatalytic performance under visible-light irradiation.Capture experiments were also conducted to clarify the function of different active species generated on the surface of Ag/Ag2MoO4during the photocatalytic process,in which both holes and ·OH radicals were found to play crucial role in photocatalytic removal of RhB under visible light irradiation.A possible photocatalytic mechanism of Ag/Ag2MoO4 was finally proposed on the basis of all the results to explain the higher photocatalytic activity of the octahedral Ag/Ag2MoO4 composites.It was inferred that the photoinduced ＂hot＂ electrons can quickly transfer from the Ag NPs to the conduction band of Ag2MoO4 and react with oxygen and H2O to generate a large quality of active radicals such as ·OH and ·O2^- because of the SPR effects.Besides,this SPR effects of Ag nanoparticles deposited on the surface of Ag2MoO4 can not only dramatically amplify its light absorption,especially in the visible region,but also promote the separation of photoexcited electron-hole pairs and effectively decrease electron-hole recombination.

Detection of Penicillin via Surface Plasmon Resonance Biosensor

A method of using Au colloid to capture the decomposed product of penicillin, penicillamine, on a surface plasmon resonance（SPR） biosensor for the quantitative determination of penicillin was developed. Based on the de-composition of penicillin to generate penicillamine and penilloaldehyde, a high sensitive biosensor for detecting penicillin was also developed. In our experiment, it was penicillamine rather than penicillin that has been measured. This is because penicillamine contains a functional group that makes it self-assembling on Au colloid to increase the molecular weight so as to improve the surface plasmon resonance signal. On a UV-Vis spectrophotometer, a high concentration of penicilliamine-Au complex was determined, indicating that penicillamine was already well combined with Au colloid. The method, using the combination of Au colloid with penicillamine, proved to detect penicillin.

LABEL-FREE DETECTION OF PROTEIN MICROARRAY WITH HIGH THROUGHPUT SURFACE PLASMON RESONANCE IMAGING(SPRI)

A surface plasmon resonance imaging(SPRI)system was developed for the discrimination of proteins on a gold surface.As a label-free and high-throughput technique,SPRI enables simultaneously monitoring of the biomolecular interactions at low concentrations.We used SPRI as a label-free and parallel method to detect different proteins based on protein microarray.Bovine Serum Albumin(BSA),Casein and Immunoglobulin G(IgG)were immobilized onto the Au surface of a gold-coated glass chip as spots forming a 6×6 matrix.These proteins can be discriminated directly by changing the incident angle of light.Excellent reproducibility for label-free detection of protein molecules was achieved.This SPRI platform represents a simple and robust method for performing high-sensitivity detection of protein microarray.

Analysis of 17β-Estadiol from Sewage in Coastal Marine Environment by Surface Plasmon Resonance Technique

In this study, surface plasmon resonance （SPR） for monitoring 17β-eatradiol （E2） was developed. The small molecule E2 was immobilized on a CM5 sensor chip for an indirect competitive immunoassay to detect E2. The SPR response bahed on the antigen-antibody reaction was measured by injecting the sample solution into the flow system. The limitation of detection was 0.445 μg/L. The developed SPE-SPR system was applied to analyze the seawater samples. Recovery of E2 was 91.6%-93. 1%. Relative standard deviations（RSD） for the E2 assay were between 10.9%-15.1% （n = 3）. The range of determination of E2 samples from the sewage in the coastal marine environ-ment was between ND（lower than detection limit） and ca. 11.78 ng/L.

Using a Surface Plasmon Resonance Biosensor for Rapid Detection of Salmonella Typhimurium in Chicken Carcass

Chicken is one of the most popular meat products in the world. Salmonella Typhimurium is a common foodbome pathogens associated with the processing of poultry. An optical Surface Plasmon Resonance （SPR） biosensor was sensitive to the presence of Salmonella Typhimurium in chicken carcass. The Spreeta biosensor kits were used to detect Salmonella Typhimurium on chicken carcass successfully. A taste sensor like electronic tongue or biosensors was used to basically ＂taste＂ the object and differentiated one object from the other with different taste sensor signatures. The surface plasmon resonance biosensor has potential for use in rapid, real-time detection and identification of bacteria, and to study the interaction of organisms with dif- ferent antisera or other molecular species. The selectivity of the SPR biosensor was assayed using a series of antibody con- centrations and dilution series of the organism. The SPR biosensor showed promising to detect the existence of Salmonella Typhimurium at 1 x 106 CFU/ml. Initial results show that the SPR biosensor has the potential for its application in pathogenic bacteria monitoring. However, more tests need to be done to confirm the detection limitation.

Ultrasensitive nanosensors based on localized surface plasmon resonances:From theory to applications

The subwavelength confinement feature of localized surface plasmon resonance（LSPR） allows plasmonic nanostructures to be functionalized as powerful platforms for detecting various molecular analytes as well as weak processes with nanoscale spatial resolution. One of the main goals of this field of research is to lower the absolute limit-of-detection（LOD）of LSPR-based sensors. This involves the improvement of（i） the figure-of-merit associated with structural parameters such as the size, shape and interparticle arrangement and,（ii） the spectral resolution. The latter involves advanced target identification and noise reduction techniques. By highlighting the strategies for improving the LOD, this review introduces the fundamental principles and recent progress of LSPR sensing based on different schemes including 1） refractometric sensing realized by observing target-induced refractive index changes, 2） plasmon rulers based on target-induced relative displacement of coupled plasmonic structures, 3） other relevant LSPR-based sensing schemes including chiral plasmonics,nanoparticle growth, and optomechanics. The ultimate LOD and the future trends of these LSPR-based sensing are also discussed.

Surface plasmon resonance analysis to evaluate the importance of heparin sulfate groups＇ binding with human aFGF and bFGF

Human acidic and basic fibroblast growth factors (aFGF and bFGF) are classic and well characterized members of the heparin binding growth factor family. Heparin is generally thought to play an extremely important role in regulating aFGF and bFGF bioactivities through its strong binding with them. In order to unravel the mechanism of the interactions between heparin and FGFs, and evaluate the importance of heparin sulfate groups' binding with FGFs, surface plasmon resonance analyses were performed using IAsys Cuvettes System. Heparin and its regioselectively desulfated derivatives were immobilized on the cuvettes. aFGF and bFGF solutions with different concentrations were pipetted into the cuvettes and the progress of the interaction was monitored in real\|time by Windows based software, yielding kinetic and equilibrium constants for these interactions. In addition, in order to reduce the delicate difference among the cuvettes, inhibition analyses of mixture of FGFs and immobilized native heparin by modified heparins were also done. The data from these two methods were similar, indicating that all sulfate groups at 2 O, 6 O and N in heparin were required for the binding to aFGF; and that their contribution to the binding was in the order 2 O, N and 6 O sulfate group. In contrast, definite contribution of the 6 O sulfate group to the binding with bFGF was most apparent, while the other two sulfate groups appeared to be necessary in the order 2 O and N sulfate group. These methods established here can be used for analysing the effect of sulfate groups in heparin on the binding with other human FGF members or other heparin binding proteins.

A strategy of screening and binding analysis of bioactive components from traditional Chinese medicine based on surface plasmon resonance biosensor

Elucidating the active components of traditional Chinese medicine(TCM)is essential for understanding the mechanisms of TCM and promote its rational use as well as TCM-derived drug development.Recent studies have shown that surface plasmon resonance(SPR)technology is promising in this field.In the present study,we propose an SPR-based integrated strategy to screen and analyze the major active components of TCM.We used Radix Paeoniae Alba(RPA)as an example to identify the compounds that can account for its anti-inflammatory mechanism via tumor necrosis factor receptor type 1(TNF-R1).First,RPA extraction was analyzed using an SPR-based screening system,and the potential active ingredients were collected,enriched,and identified as paeoniflorin and paeonol.Next,the affinity constants of paeoniflorin and paeonol were determined as 4.9 and 11.8 mM,respectively.Then,SPR-based competition assays and molecular docking were performed to show that the two compounds could compete with tumor necrosis factor-a(TNF-a)while binding to the subdomain 1 site of TNF-R1.Finally,in biological assays,the two compounds suppressed cytotoxicity and apoptosis induced by TNF-a in the L929 cell line.These findings prove that SPR technology is a useful tool for determining the active ingredients of TCM at the molecular level and can be used in various aspects of drug development.The SPR-based integrated strategy is reliable and feasible in TCM studies and will shed light on the elucidation of the pharmacological mechanism of TCM and facilitate its modernization.

Low-cost,high performance surface plasmon resonance-compatible films characterized by the surface plasmon resonance technique

A new analytical method based on the surface plasmon resonance （SPR） technique is presented, with which SPR curves for both wavelength and angular modulations can be obtained simultaneously via only a single scan of the incident angle. Using this method, the SPR responses of TiO2-coated Cu films are characterized in the wavelength range from 600 nm to 900 nm. For the first time, we determine the effective optical constants and the thicknesses of TiO2-coated Cu films using the SPR curves of wavelength modulation. The sensitivities of prism-based SPR refractive index sensors using TiO2-coated Cu films are investigated theoretically for both wavelength and angular modulations, the results show that in the case of sensitivity with wavelength modulation, TiO2-coated Cu films are not as good as the Au film, however, they are more suitable than the Au film for SPR refractive index sensors with angular modulation because a higher sensitivity can be achieved.

Manipulated localized surface plasmon resonances in silver nanoshells coated with a spherical anisotropic layer

The influences of the anisotropy of the outer spherically anisotropic （SA） layer on the far-field spectra and near- field enhancements of the silver nanoshells are investigated by using a modified Mie scattering theory. It is found that with the increase of the anisotropic value of the SA layer, the dipole resonance wavelength of the silver nanoshell first increases and then decreases, while the local field factor （LFF） reduces. With the decrease of SA layer thickness, the dipole wavelength of the silver nanoshell shows a distinct blue-shift. When the SA layer becomes very thin, the modulations of the anisotropy of the SA layer on the plasmon resonance energy and the near-field enhancement are weakened. We further find that the smaller anisotropic value of the SA layer is helpful for obtaining the larger near-field enhancement in the Ag nanoshell. The geometric average of the dielectric components of the SA layer has a stronger effect on the plasmon resonance energy of the silver nanoshell than on the near-field enhancement.

Advances in Phase Detection Technique of Surface Plasmon Resonance Biosensor

Surface plasmon resonance (SPR) sensing is an optical method based on evanescent wave.SPR biosensor can detect interaction of label-free biomolecules in real-time.With further development,it can become a research instrument in proteomics.SPR biosensor can be divided intensity measurement and phase measurement,and the latter possesses higher sensitivity than the former one.This paper attempts to summarize the SPR phase detection theory,discuss the major developments,compare the merits and deficiencies of various methods,and look forward to future prospects.

Tunable localized surface plasmon resonances in MoO_(3-x)-TiO_(2) nanocomposites with enhanced catalytic activity for CO_(2) photoreduction under visible light

The photocatalytic reduction of CO2 with H2O to fuels and chemicals using solar energy is one of the most attractive but highly difficult routes.Thus far,only a very limited number of photocatalysts has been reported to be capable of catalyzing the photocatalytic reduction of CO2 under visible light.The utilization of the localized surface plasmon resonance(LSPR)phenomenon is an attractive strategy for developing visible-light photocatalysts.Herein,we have succeeded in synthesizing plasmonic MoO3?x-TiO2 nanocomposites with tunable LSPR by a simple solvothermal method.The well-structured nanocomposite containing two-dimensional(2D)molybdenum oxide(MoO3?x)nanosheets and one-dimensional(1D)titanium oxide nanotubes(TiO2-NT)showed LSPR absorption band in the visible-light region,and the incorporation of TiO2-NT significantly enhanced the LSPR absorption band.The MoO3?x-TiO2-NT nanocomposite is promising for application in the photocatalytic reduction of CO2 with H2O under visible light irradiation.

Sensitivity Dependence of Surface Plasmon Resonance Based Sensors on Prism Refractive Index

We theoretically and experimentally demonstrate that refractive index of the prism used to load metal film has significant influence on sensitivity of surface plasmon resonance based sensors. The prism with lower refractive index gives the sensors a higher sensitivity in detecting refractive index variations of a sample. We attribute this effect to the fact that a prism with low refractive index will increase coupling distance between surface plasmons and the medium under investigation.

High sensitivity refractive index gas sensing enhanced by surface plasmon resonance with nano-cavity antenna array

The surface plasmon resonance gas sensor is presented for refractive index detection using nano-cavity antenna array. The gas sensor monitors the changes of the refractive index by measuring the spectral shift of the resonance dip, for modulating the wavelength of incident light. It is demonstrated that minute changes in the refractive index of a medium close to the surface of a metal film, owing to a shift in the resonance dip of the wavelength, can be detected. The average detection sensitivity is about 3200 nm/RIU （refractive index units）, which is more than twice that of a metal grating-based gas sensor. The reflectivity of the surface plasmon resonance dip is only - 0.03%, and the full widths at half maximum （FWHMs） of bandwidth of the angle and wavelength are - 0.20° and 4.71 nm, respectively.

Immunosensor Based on Surface Plasmon Resonance for Antigen Recognition

A novel immunosensor based on surface plasmon resonance（SPR） has been developed for the recognition of antigen. The sensor was designed on the basis of the fixed angle of incidence and measuring the reflected intensities in a wavelength range of 430--750 nm in real-time. An ultra-bright white light-emitting diode（LED） was used as the light source. Molecular self-assembling in solution was used to form the sensing membrane on gold substrate. It has been seen that the sensitivity of the SPR sensor with 3-mercaptopropionic acid（MPA）/protein A（SPA） sensing membrane is considerably higher than that with MPA or SPA modified sensing membrane. The kinetic processes on the sensing membrane were studied. The human B factor（Bf）, an activator of complement 3（C3）, was recognized among the other antigens. This sensor can also be used for other antigen/antibody or adaptor/receptor recognition. Under optimized experimental conditions, the sensor has good selectivity, repeatability, and reversibility.

Studies of surface plasmon resonance sensor using bi-beam differential measurement approach

In this paper, a low-cost measurement approach with bi-beam was presented, which can be used for real-time detection and online analysis of solution refractive index, based on systematical analysis and experiments of conventional detection methods on surface plasmon resonance sensor. This novel method was analyzed theoretically and based on it a sensor system set was established. The factors that affect the sensor's sensitivity and working range were discussed. The angular adjustment setup was simplified, errors produced by movable components were avoided and the maneuverability was enhanced with this new method. The noiseproof feature and stability of the sensor system were greatly improved as well.