The lath-or plate-shaped bainitic ferrite of low and medium carbon alloy steels consists of packets of ferrite sublaths which are composed of many finer and regular ferrite blocks.They are uniform shear growth units o...The lath-or plate-shaped bainitic ferrite of low and medium carbon alloy steels consists of packets of ferrite sublaths which are composed of many finer and regular ferrite blocks.They are uniform shear growth units of bainitic phase transformation.No carbide is precipitated from them.The bainitic O-carbides are precipitated from γ-α interface or carbon-rich austenite.The mode of arrangement of the units in ferrite sublath packet is in uni-or bi-di- rection.Single surface relief is produced by the accumulation of uniform shear strains with all the ferrite units arranged unidirectionally in a sublath packet,while tent-shaped surface relief is formed by the integration of the uniform shear strains of two groups with ferrite units piling up in two directions and growing face to face;whereas if they grow back to back,the integra- tion will be responsible for invert-tent-shaped surface relief.The interface trace between two groups of ferrite units in a sublath packet is shown as“midrib”.展开更多
A series of azobenzene functionalized poly(aryl ether) copolymers(azo-PAEs) containing azo moieties on pendants was prepared by direct copolymerization. The amount of azobenzene chromophores could be controlled by...A series of azobenzene functionalized poly(aryl ether) copolymers(azo-PAEs) containing azo moieties on pendants was prepared by direct copolymerization. The amount of azobenzene chromophores could be controlled by the feed ratio of azo-monomer. Their chemical structures and properties were characterized by means of infrared(IR) spectrometry, UV-Vis, hydrogen nuclear magnetic resonance(Ill NMR), difference scanning calorimetry(DSC), and thermogravimetric analysis(TGA). The results suggest that azo-PAEs had high glass transition temperatures(Tgs) and good thermal stability. By exposing their spin-coated films to an interference pattern laser beam, azo-PAEs could be used for the fabrication of thermal stable surface relief gratings(SRGs).展开更多
The relief degree of land surface (RDLS) is an important factor for describing the landform at macro-scales. This study defines a concept for RDLS and applies the concept for population distribution study of the ent...The relief degree of land surface (RDLS) is an important factor for describing the landform at macro-scales. This study defines a concept for RDLS and applies the concept for population distribution study of the entire country. Based on the concept and macro-scale digital elevation model datum and ARC/INFO software, the RDLS at a 10 km×10 km grid size of China is extracted. This paper depicts systemically the spatial distributions of RDLS through analyzing the ratio structure and altitudinal characters of RDLS in China. The conclusions are drawn as follows: the RDLS in more than 63% of the area is less than one (1) (relative altitude is less than 500 m), reflecting the fact that most of RDLS in China is low. In general, the RDLS in the west is larger than that in the east and so is the south than that of the north in China. The RDLS decreases with the increase of longitude and latitude and the change of RDLS at the latitudes of 28°N, 35°N, 42°N, as well as at the longitudes of 85°E, 102°E, 115°E could reflect the three major ladders of China. In the vertical direction, the RDLS increases with the increase of altitude. Analysis of the correlation between RDLS and population distribution in China and its regional difference shows that the R2 value between RDLS and population density is 0.91 and RDLS is an important factor influencing the spatial distribution of population. More than 85% of the people in China live in areas where the RDLS is less than one (1), while the population in areas with RDLS greater than 3 accounts only for 0.57% of the total. The regional difference of correlation between RDLS and population within China is significant and such correlation is significant in Central China and South China and weak in Inner Mongolia and Tibet.展开更多
The reconstructed structure of Cu (100) surface induced by atomic N adsorption is studied by using scanning tunneling microscopy (STM). The 2D structure of copper boundary between neighbouring N covered islands is...The reconstructed structure of Cu (100) surface induced by atomic N adsorption is studied by using scanning tunneling microscopy (STM). The 2D structure of copper boundary between neighbouring N covered islands is found to be sensitive to the growth conditions, e.g. N+ bombardment time and annealing temperature. The copper boundary experiences a transition from nano-scale stripe to nano-particle when the substrate is continuously annealed at 623~K for a longer time. A well-defined copper-stripe network can be achieved by precisely controlling the growth conditions, which highlights the possibility of producing new templates for nanofabrication.展开更多
Urban-rural integration (URI) is a global challenge that is highly related to inequalities, poverty, economic growth, and other Sustainable Development Goals (SDGs). Existing research has evaluated the extent of URI a...Urban-rural integration (URI) is a global challenge that is highly related to inequalities, poverty, economic growth, and other Sustainable Development Goals (SDGs). Existing research has evaluated the extent of URI and explored its influencing factors, but urban-rural linkages are seldom incorporated in evaluation systems, and geographical factors are rarely recognized as the influencing factors. We construct a URI framework including regional economy, rural development, urban-rural linkage, and urban-rural gap. Based on a dataset consisting of 1,669 counties in China in 2020, we reveal the spatial pattern of URI and find a high correlation between the spatial pattern of URI and the relief degree of land surface (RDLS). Using structural equation modeling, we discover that topography has direct ( − 0.18, p < 0.001) and indirect ( − 0.17, p < 0.001) effects on URI. The indirect negative effects are mediated through the infrastructure, and the combination of localized advantages and modern technical conditions could mitigate the negative impact of topography. Finally, we identify 742 counties as lagging regions in URI, which can be clustered into eight types. Our findings could facilitate policy designing for those countries striving for integrated and sustainable development of urban and rural areas.展开更多
In this paper, stable single-mode operation at high temperatures is produced by the surface-relief-integrated vertical cavity surface emitting laser(VCSEL). The gain-cavity mode detuning technique is employed to rea...In this paper, stable single-mode operation at high temperatures is produced by the surface-relief-integrated vertical cavity surface emitting laser(VCSEL). The gain-cavity mode detuning technique is employed to realize high operating temperatures for the VCSEL. The surface relief is etched in the centre of the top side as a mode discriminator for the fundamental mode output, and the threshold current minimum is 1.94 mA at high temperatures by the gain-cavity mode detuning technique. Maximum single-fundamental-mode output power of 0.45 mW at 80℃ is obtained, and the side mode suppression ratios(SMSRs) are more than 30 dB with increasing temperature and current, respectively.展开更多
Habit plane rotation of lath martensite transformation in Fe-Ni-Mn alloy was predicted by means of Displacement Vector Theory. Its surface relief effect was observed and a math model for the quantitative analysis of h...Habit plane rotation of lath martensite transformation in Fe-Ni-Mn alloy was predicted by means of Displacement Vector Theory. Its surface relief effect was observed and a math model for the quantitative analysis of habit plane rotation of lath martensite transformation was established by means of atomic force microscopy (AFM). The experiment showed that the largest rotation of habit plane of lath martensite transformation predicted by means of Displacement Vector Theory is 13.50°, and it's incompatible with the concept of invariant plane strain (IPS); surface relief of lath martensite revealed no character of IPS, i.e. it exhibited irregular 'N'-shaped 'surface relief packet', and 'surface relief packet' was composed of layers of several small surface reliefs, the AFM quantitative analysis of habit plane rotation of lath martensite transformation was 11.11°, which was in agreement with the prediction of Displacement Vector Theory (13.50°) and it firmly confirmed the habit plane rotation of lath martensite transformation and the correctness of Displacement Vector Theory.展开更多
Visual saliency can always persuade the viewer's visual attention to fine-scale mesostructure of 3D complex shapes. Owing to the multi-channel salience measure and salience-domain shape modeling technique, a novel vi...Visual saliency can always persuade the viewer's visual attention to fine-scale mesostructure of 3D complex shapes. Owing to the multi-channel salience measure and salience-domain shape modeling technique, a novel visual saliency based shape depiction scheme is presented to exaggerate salient geometric details of the underlying relief surface. Our multi-channel salience measure is calculated by combining three feature maps, i.e., the 0-order feature map of local height distribution, the l-order feature map of normal difference, and the 2-order feature map of mean curvature variation. The original relief surface is firstly manipulated by a salience-domain enhancement function, and the detail exaggeration surface can then be obtained by adjusting the surface normals of the original surface as the corresponding final normals of the manipulated surface. The advantage of our detail exaggeration technique is that it can adaptively alter the shading of the original shape to reveal visually salient features whilst keeping the desired appearance unimpaired. The experimental results demonstrate that our non-photorealistic shading scheme can enhance the surface mesostructure effectively and thus improving the shape depiction of the relief surfaces.展开更多
文摘The lath-or plate-shaped bainitic ferrite of low and medium carbon alloy steels consists of packets of ferrite sublaths which are composed of many finer and regular ferrite blocks.They are uniform shear growth units of bainitic phase transformation.No carbide is precipitated from them.The bainitic O-carbides are precipitated from γ-α interface or carbon-rich austenite.The mode of arrangement of the units in ferrite sublath packet is in uni-or bi-di- rection.Single surface relief is produced by the accumulation of uniform shear strains with all the ferrite units arranged unidirectionally in a sublath packet,while tent-shaped surface relief is formed by the integration of the uniform shear strains of two groups with ferrite units piling up in two directions and growing face to face;whereas if they grow back to back,the integra- tion will be responsible for invert-tent-shaped surface relief.The interface trace between two groups of ferrite units in a sublath packet is shown as“midrib”.
基金Supported by the National Natural Science Foundation of China(No.51103060).
文摘A series of azobenzene functionalized poly(aryl ether) copolymers(azo-PAEs) containing azo moieties on pendants was prepared by direct copolymerization. The amount of azobenzene chromophores could be controlled by the feed ratio of azo-monomer. Their chemical structures and properties were characterized by means of infrared(IR) spectrometry, UV-Vis, hydrogen nuclear magnetic resonance(Ill NMR), difference scanning calorimetry(DSC), and thermogravimetric analysis(TGA). The results suggest that azo-PAEs had high glass transition temperatures(Tgs) and good thermal stability. By exposing their spin-coated films to an interference pattern laser beam, azo-PAEs could be used for the fabrication of thermal stable surface relief gratings(SRGs).
基金Knowledge Innovation Project of the CAS,No.KZCX2-YW-323
文摘The relief degree of land surface (RDLS) is an important factor for describing the landform at macro-scales. This study defines a concept for RDLS and applies the concept for population distribution study of the entire country. Based on the concept and macro-scale digital elevation model datum and ARC/INFO software, the RDLS at a 10 km×10 km grid size of China is extracted. This paper depicts systemically the spatial distributions of RDLS through analyzing the ratio structure and altitudinal characters of RDLS in China. The conclusions are drawn as follows: the RDLS in more than 63% of the area is less than one (1) (relative altitude is less than 500 m), reflecting the fact that most of RDLS in China is low. In general, the RDLS in the west is larger than that in the east and so is the south than that of the north in China. The RDLS decreases with the increase of longitude and latitude and the change of RDLS at the latitudes of 28°N, 35°N, 42°N, as well as at the longitudes of 85°E, 102°E, 115°E could reflect the three major ladders of China. In the vertical direction, the RDLS increases with the increase of altitude. Analysis of the correlation between RDLS and population distribution in China and its regional difference shows that the R2 value between RDLS and population density is 0.91 and RDLS is an important factor influencing the spatial distribution of population. More than 85% of the people in China live in areas where the RDLS is less than one (1), while the population in areas with RDLS greater than 3 accounts only for 0.57% of the total. The regional difference of correlation between RDLS and population within China is significant and such correlation is significant in Central China and South China and weak in Inner Mongolia and Tibet.
基金supported by the National Natural Science Foundation of China (Grant Nos. 60506019 and 10674118)
文摘The reconstructed structure of Cu (100) surface induced by atomic N adsorption is studied by using scanning tunneling microscopy (STM). The 2D structure of copper boundary between neighbouring N covered islands is found to be sensitive to the growth conditions, e.g. N+ bombardment time and annealing temperature. The copper boundary experiences a transition from nano-scale stripe to nano-particle when the substrate is continuously annealed at 623~K for a longer time. A well-defined copper-stripe network can be achieved by precisely controlling the growth conditions, which highlights the possibility of producing new templates for nanofabrication.
基金the National Natural Science Foundation of China(Grants No.T2261129477 and 41971220)the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDA23070300).
文摘Urban-rural integration (URI) is a global challenge that is highly related to inequalities, poverty, economic growth, and other Sustainable Development Goals (SDGs). Existing research has evaluated the extent of URI and explored its influencing factors, but urban-rural linkages are seldom incorporated in evaluation systems, and geographical factors are rarely recognized as the influencing factors. We construct a URI framework including regional economy, rural development, urban-rural linkage, and urban-rural gap. Based on a dataset consisting of 1,669 counties in China in 2020, we reveal the spatial pattern of URI and find a high correlation between the spatial pattern of URI and the relief degree of land surface (RDLS). Using structural equation modeling, we discover that topography has direct ( − 0.18, p < 0.001) and indirect ( − 0.17, p < 0.001) effects on URI. The indirect negative effects are mediated through the infrastructure, and the combination of localized advantages and modern technical conditions could mitigate the negative impact of topography. Finally, we identify 742 counties as lagging regions in URI, which can be clustered into eight types. Our findings could facilitate policy designing for those countries striving for integrated and sustainable development of urban and rural areas.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61434005,61474118,11674314,51672264,and 11404326)the Science and Technology Program of Jilin Province,China(Grant No.20150203011GX)+1 种基金the Science and Technology Program of Changchun City,China(Grant No.15SS02)the Youth Innovation Promotion Association of China(Grant No.2017260)
文摘In this paper, stable single-mode operation at high temperatures is produced by the surface-relief-integrated vertical cavity surface emitting laser(VCSEL). The gain-cavity mode detuning technique is employed to realize high operating temperatures for the VCSEL. The surface relief is etched in the centre of the top side as a mode discriminator for the fundamental mode output, and the threshold current minimum is 1.94 mA at high temperatures by the gain-cavity mode detuning technique. Maximum single-fundamental-mode output power of 0.45 mW at 80℃ is obtained, and the side mode suppression ratios(SMSRs) are more than 30 dB with increasing temperature and current, respectively.
基金the National Natural Science Foundation of China and that of Hebei province.
文摘Habit plane rotation of lath martensite transformation in Fe-Ni-Mn alloy was predicted by means of Displacement Vector Theory. Its surface relief effect was observed and a math model for the quantitative analysis of habit plane rotation of lath martensite transformation was established by means of atomic force microscopy (AFM). The experiment showed that the largest rotation of habit plane of lath martensite transformation predicted by means of Displacement Vector Theory is 13.50°, and it's incompatible with the concept of invariant plane strain (IPS); surface relief of lath martensite revealed no character of IPS, i.e. it exhibited irregular 'N'-shaped 'surface relief packet', and 'surface relief packet' was composed of layers of several small surface reliefs, the AFM quantitative analysis of habit plane rotation of lath martensite transformation was 11.11°, which was in agreement with the prediction of Displacement Vector Theory (13.50°) and it firmly confirmed the habit plane rotation of lath martensite transformation and the correctness of Displacement Vector Theory.
基金supported by the National Natural Science Foundation of China under Grant Nos. 61272309,61170138the Program for New Century Excellent Talents in University of China under Grant No. NCET-10-0728
文摘Visual saliency can always persuade the viewer's visual attention to fine-scale mesostructure of 3D complex shapes. Owing to the multi-channel salience measure and salience-domain shape modeling technique, a novel visual saliency based shape depiction scheme is presented to exaggerate salient geometric details of the underlying relief surface. Our multi-channel salience measure is calculated by combining three feature maps, i.e., the 0-order feature map of local height distribution, the l-order feature map of normal difference, and the 2-order feature map of mean curvature variation. The original relief surface is firstly manipulated by a salience-domain enhancement function, and the detail exaggeration surface can then be obtained by adjusting the surface normals of the original surface as the corresponding final normals of the manipulated surface. The advantage of our detail exaggeration technique is that it can adaptively alter the shading of the original shape to reveal visually salient features whilst keeping the desired appearance unimpaired. The experimental results demonstrate that our non-photorealistic shading scheme can enhance the surface mesostructure effectively and thus improving the shape depiction of the relief surfaces.