Centrifuge experiment on the penetration test for evaluating undrained strength of deep-sea surface soils

Rapid advances in deep-sea mining engineering have created an urgent need for the accurate evaluation of the undrained strength of marine soils,especially surface soils.Significant achievements have been made using full-flow penetration penetrometers to evaluate marine soil strength in the deep penetration;however,a method considering the effect of ambient water on the surface penetration needs to be established urgently.In this study,penetrometers with multiple probes were developed and used to conduct centrifuge experiments on South China Sea soil and kaolin clay.First,the forces on the probes throughout the penetration process were systematically analyzed and quantified.Second,the spatial influence zone was determined by capturing the resistance changes and sample crack development,and the penetration depth for a sample to reach a stable failure mode was given.Third,the vane shear strength was used to invert the penetration resistance factor of the ball and determine the range of the penetration resistance factor values.Furthermore,a methodology to determine the penetration resistance factors for surface marine soils was established.Finally,the effect of the water cavity above various probes in the surface penetration was used to formulate an internal mechanism for variations in the penetration resistance factor.

Soil surface roughness change and its effect on runoff and erosion on the Loess Plateau of China

As an important parameter in the soil erosion model, soil surface roughness（SSR） is used to quantitatively describe the micro-relief on agricultural land. SSR has been extensively studied both experimentally and theoretically; however, no studies have focused on understanding SSR on the Loess Plateau of China. This study investigated changes in SSR for three different tillage practices on the Loess Plateau of China and the effects of SSR on runoff and erosion yield during simulated rainfall. The tillage practices used were zero tillage（ZT）, shallow hoeing（SH） and contour ploughing（CP）. Two rainfall intensities were applied, and three stages of water erosion processes（splash erosion（I）, sheet erosion（II） and rill erosion（III）） were analyzed for each rainfall intensity. The chain method was used to measure changes in SSR both initially and after each stage of rainfall. A splash board was used to measure the splash erosion at stage I. Runoff and sediment data were collected continuously at 2-min intervals during rainfall erosion stages II and III. We found that SSR of the tilled surfaces ranged from 1.0% to 21.9% under the three tillage practices, and the order of the initial SSR for the three treatments was ZT〈SH〈CP. For the ZT treatment, SSR increased slightly from stage I to III, whereas for the SH and CP treatments, SSR decreased by 44.5% and 61.5% after the three water erosion stages, respectively, and the greatest reduction in SSR occurred in stage I. Regression analysis showed that the changes in SSR with increasing cumulative rainfall could be described by a power function（R2〉0.49） for the ZT, SH and CP treatments. The runoff initiation time was longer in the SH and CP treatments than in the ZT treatment. There were no significant differences in the total runoff yields among the ZT, SH and CP treatments. Sediment loss was significantly smaller（P〈0.05） in the SH and CP treatments than in the ZT treatment.

Speciation and fractionation of heavy metals in soil experimentally contaminated with Pb, Cd, Cu and Zn together and effects on soil negative surface charge

Speciation and fractionation of heavy metals in soil subsamples experimentally loaded with Pb, Cd, Cu and Zn in orthogonal design was investigated by sequential extraction, and operationally defined as water soluble and exchangeable(SE), weakly specific adsorbed(WSA), Fe and Mn oxides bound(OX) and organic bound(ORG). The results showed that fractions of heavy metals in the soil subsamples depended on their speciation. About 90% of Cd and 75% of Zn existed in soil subsamples in the SE fraction. Lead and Cu existed in soil subsamples as SE, WSA and OX fractions simultaneously, although SE was still the major fraction. Organic bound heavy metals were not clearly apparent in all the soil subsamples. The concentration of some heavy metal fractions in soil subsamples showed the good correlation with ionic impulsion of soil, especially for the SE fraction. Continuous saturation of soil subsamples with 0.20 mol/L NH 4Cl, which is the first step for determination of the negative surface charge of soil by the ion retention method, resulted in desorption of certain heavy metals from the soil. It was found that the percentage desorption of heavy metals from soil subsamples depended greatly on pH, the composition and original heavy metal content of the soil subsamples. However, most of the heavy metals in the soil subsamples were still be retained after multiple saturation. Compared with the parent soil, the negative surface charge of soil subsamples loaded with heavy metals did not show difference significantly from that of the parent one by statistical analysis. Heavy metals existed in the soil subsamples mainly as exchangeable and precipitated simultaneously.

Photocatalytic remediation ofγ-hexachlorocyclohexane contaminated soils using TiO_2 and montmorillonite composite photocatalyst

TiO2 and montmorillonite composite photocatalysts were prepared and applied in degrading γ-hexachlorocyclohexane （γ-HCH） in soils. After being spiked with γ-HCH, soil samples loaded with the composite photocatalysts were exposed to UV-light irradiation. The results indicated that the photocatalytic activities of the composite photocatalysts varied with the content of TiO2 in the order of 10%〈70%〈50% 〈30%, Moreover, the photocatalytic activity of the composite photocatalysts with TiO2 content 30% was higher than that of the pure P25 with the same mass of TiO2. The strong adsorption capacity of the composite photocatalysts and quantum size effect may contribute to its increased photocatalytic activities. In addition, effect of dosage of composite photocatalysts and soil pH on γ-HCH photodegradation was investigated. Pentachlorocyclohexene, trichlorocyclohexene, and dichlorobenzene were detected as photodegradation intermediates, which were gradually degraded with the photodegradation evolution.

Selection of Judging Indicators for Surface Morphology of Soil Crack under Different Development Degrees in Yuanmou Arid-Hot Valley Region

Quantification of complicated surface morphology of soil crack is a prerequisite and key to soil crack study. This paper takes soil crack quads in Yuanmou arid-hot valley region as examples, selecting several morphological indicators, and analyzes the soil crack＇s morphological features under various development degrees. By statistic analysis, three quantitative indicators for surface morphology are selected, namely soil crack area density, area weighted mean fractal dimension and connectivity index R, which can not only express the development intensity of soil cracks, but also effectively describe its morphological complexity and connectivity. The research results set a good base for the establishment of soil crack assessment system in Yuanmou arid-hot valley region.

Toxic metal enrichment characteristics and sources of arid urban surface soil in Yinchuan City, China

To investigate the environmental quality of the urban surface soil in Yinchuan City, the capital of Ningxia Hui Autonomous Region （Ningxia）, China, we sampled surface soil and measured the concentrations of 8 toxic metals （Pb, Cr, Cu, Zn, Co, Bi, Ni and V） using X-ray fluorescence spectrometry. The enrichment characteristics and sources of these toxic metals in the soil were analyzed by the enrichment factor （EF） and multivariate statistical analysis. The results showed that the mean concentrations of these toxic metals in the soil samples were 25.0, 109.1, 16.8, 26.0, 37.2, 2.7, 25.3 and 59.9 mg/kg for Pb, Cr, Cu, Zn, Co, Bi, Ni and V, respectively, which were 1.2, 1.8, 0.8, 0.4, 3.2, 8.7, 0.7 and 0.8 times of the corresponding background values of Ningxia soil, respectively. The variations of Pb, Zn, Co, Bi and Ni concentrations in the surface soil of Yinchuan were larger than those of the other metals. Our results also showed that the toxic metals investigated in the soil had different enrichment levels. Both Co and Bi were significantly enriched, whereas Cr was only moderately enriched in the soil. There was a deficiency or minimal enrichment of the other toxic metals in the soil. Source analysis results based on the concentration, enrichment characteristics and multivariate statistical analysis indicated that Cr, V and Ni originated from a combination of fossil fuel combustion, traffic pollution and natural occurrence. Pb, Cu and Zn were predominantly derived from natural and traffic sources, while Co and Bi primarily originated from construction sources.

Noise Reduction Technique Applied to the Multichannel Analysis of Surface Waves

This paper shows the presence of noises and technique to reduce these noises during the surface wave analysis. The frequency-dependent properties of Rayleigh-type surface waves can be used for imaging and characterizing the shallow subsurface. Interference by coherent source-generated noise inhibits the reliability of shear-wave velocities determined through inversion of the phase velocities of Rayleigh waves. Among these interferences by non-planar, non-fundamental mode Rayleigh waves （noise） are body waves, scattered and non-source-generated surface waves, and highermode surface waves. For the reduction of noise, the filtering technique is implemented in this paper for the multichannel analysis of surface wave method （MASW）. With the de-noising technique during the MASW method, more robust and reliable outcome is achieved. The significance of this paper is to obtain pre-awareness about noises during surface wave analysis and take better outcomes with denoising performance in near surface soil investigations.

Vertical distribution of soil moisture and surface sandy soil wind erosion for different types of sand dune on the southeastern margin of the Mu Us Sandy Land,China

Soil moisture is a critical state affecting a variety of land surface and subsurface processes. We report investigation results of the factors controlling vertical variation of soil moisture and sand transport rate of three types of dunes on the south- eastern margin of the Mu Us Sandy Land. Samples were taken from holes drilled to a depth of 4 m at different topographic sites on the dunes, and were analyzed for soil moisture, grain-size distribution and surface sediment discharge. The results show that： （1） The average soil moisture varies in different types of dunes, with the following sequences ordered from highest to lowest： in the shrubs-covered dunes and the trees-covered dunes the sequence is from inter-dunes lowland to windward slope to leeward slope. The average moisture in the bare-migratory sand dunes is sequenced from inter-dunes lowland to leeward slope to windward slope. （2） Vegetation form and surface coverage affect the range of soil moisture of different types of dunes in the same topographic position. The coefficient of variation of soil moisture for shrubs-covered dunes is higher than that of other types of dune. （3） The effect of shrubs on dune soil moisture is explained in terms of the greater ability of shrubs to trap fine-grained atmospheric dust and hold moisture. （4） The estimated sand transport rates over sand dunes with sparse shrubs are less than those over bare-migratory dunes or sand dunes with sparse trees, indicating that shrubs are more effective in inhibiting wind erosion in the sandy land area.

Relationship between soil surface roughness and hydraulic roughness coefficient on sloping farmland

The soil surface roughness and hydraulic roughness coefficient are important hydraulic resistance characteristic parameters. Precisely estimating the hydraulic roughness coefficient is important to understanding mechanisms of overland flow. Four tillage practices, including cropland raking, artificial hoeing, artificial digging, and straight slopes, were considered based on the local agricultural conditions to simulate different values of soil surface roughness in the Loess Plateau. The objective of this study was to investigate the relationship between the soil surface roughness and hydraulic roughness coefficient on sloping farmland using artificial rainfall simulation. On a slope with a gradient of 10°, a significant logarithmic function was developed between the soil surface roughness and Manning＇s roughness coefficient, and an exponential function was derived to describe the relationship between the soil surface roughness and Reynolds number. On the slope with a gradient of 15°, a significant power function was developed to reflect the relationship between the soil surface roughness and Manning＇s roughness coefficient, and a linear function was derived to relate the soil surface roughness to the Reynolds number. These findings can provide alternative ways to estimate the hydraulic roughness coefficient for different types of soil surface roughness.

A Modified Temperature-Vegetation Dryness Index(MTVDI)for Assessment of Surface Soil Moisture Based on MODIS Data

Spatio-temporal dynamic monitoring of soil moisture is highly important to management of agricultural and vegetation eco-systems.The temperature-vegetation dryness index based on the triangle or trapezoid method has been used widely in previous studies.However,most existing studies simply used linear regression to construct empirical models to fit the edges of the feature space.This requires extensive data from a vast study area,and may lead to subjective results.In this study,a Modified Temperature-Vegetation Dryness Index(MTVDI)was used to monitor surface soil moisture status using MODIS(Moderate-resolution Imaging Spectroradiometer)remote sensing data,in which the dry edge conditions were determined at the pixel scale based on surface energy balance.The MTVDI was validated by field measurements at 30 sites for 10 d and compared with the Temperature-Vegetation Dryness Index(TVDI).The results showed that the R^(2) for MTVDI and soil moisture obviously improved(0.45 for TVDI,0.69 for MTVDI).As for spatial changes,MTVDI can also better reflect the actual soil moisture condition than TVDI.As a result,MTVDI can be considered an effective method to monitor the spatio-temporal changes in surface soil moisture on a regional scale.

Utilizing a new soil effective temperature scheme and archived satellite microwave brightness temperature data to estimate surface soil moisture in the Nagqu region, Tibetan Plateau of China

Since the early 2000s, many satellite passive microwave brightness temperature （BT） archives, such as the Advanced Microwave Scanning Radiometer for the Earth Observing System （AMSR-E） BTs, have become the useful resources for assessing the changes in the surface and deep soil moistures over both arid and semi-arid regions. In this study, we used a new soil effective temperature （T scheme and the archived AMSR-E BTs to estimate surface soil moisture （SM） over the Nagqu region in the central Tibetan Plateau, China. The surface and deep soil temperatures required for the calculation of regional-scale T were obtained from outputs of the Community Land Model version 4.5 （CLM4.5）. In situ SM measurements at the CEOP-CAMP/Tibet （Coordinated Enhanced Observing Period Asia-Australia Monsoon Project on the Tibetan Plateau） experimental sites were used to validate the AMSR-E-based SM estimations at regional and single-site scales. Furthermore, the spatial distribution of monthly mean surface SM over the Nagqu region was obtained from 16 daytime AMSR-E BT observations in July 2004 over the Nagqu region. Results revealed that the AMSR-E-based surface SM estimations agreed well with the in situ-based surface SM measurements, with the root mean square error （RMSE） ranging from 0.042 to 0.066 m3/m3 and the coefficient of determination （R2） ranging from 0.71 to 0.92 during the nighttime and daytime. The regional surface soil water state map showed a clear spatial pattern related to the terrain. It indicated that the lower surface SM values occurred in the mountainous areas of the northern, mid-western and southeastern parts of Nagqu region, while the higher surface SM values appeared in the low elevation areas such as the Tongtian River Basin, Namco Lake and bog meadows in the central part of Nagqu region. Our analysis also showed that the new T^scheme does not require special fitting parameters or additional assumptions, which simplifies the data requirements for regional-scale applications. This scheme combined with the archived satellite passive microwave BT observations can be used to estimate the historical surface SM for hydrological process studies over the Tibetan Plateau regions.

Influence of environmental,root,and stand parameters on soil surface CO_2 efflux in a Populus euphratica of desert forest in extreme arid region

Spatial variation in soil surface CO2 efflux was measured in a stand of Populus euphratica in the Ejina Oasis of desert riparian forest in the extreme arid region in northwestern China from April 2007 through October 2007.Measurements were taken with a gas-exchange analyzer linked to a soil-respiration chamber.The mean soil CO2 efflux in the stand was 2.71 μmol/(m2·s) during the growing season and 1.38 μmol/(m2·s) in the nongrowing season.The seasonal maximum (end of May through early June) andminimum (October) CO2 efflux were 3.38 and 0.69 μmol/(m2·s),respectively.The diurnal fluctuation of CO2 efflux was relatively small (< 20 percent),with theminimum appearing around 05:00 and the maximum around 15:00.Linear regression analysis showed soil-surface CO2 efflux to be most highly correlated with soil temperature (R2=0.435) and soil moisture (R2=0.213).When all variables were considered simultaneously,only soil temperature (R2=0.378),soil moisture (R2=0.147),and root volume density (R2=0.021) explained a significant amount of variance in soil surface CO2 efflux.Stand volumes were not correlated with soil CO2 efflux on our sites.

Cobalt in alluvial Egyptian soils as affected by industrial activities

Twenty five surface (0—20 cm) soil samples were collected from different locations in Egypt representing non polluted, moderately and highly polluted soils. The aim of this study was to evaluate total Co content in alluvial soils of Delta in Egypt using the delayed neturen activation analysis technique (DNAA). The two prominent gamma ray lines at 1173 2 and 1332 5 keV was efficiently used for 60 Co determination. Co content in non polluted soil samples ranged between 13 12 to 23 20 ppm Co with an average of 18 16±4.38 ppm. Cobalt content in moderately polluted soils ranged between 26 5 to 30 00 ppm with an average of 28 3±1.3 ppm. The highest Co levels (ranged from 36 to 64 69 ppm with an average of 51 9±9.5); were observed in soil samples collected from, either highly polluted agricultural soils due to prolonged irrigation with industrial wastewater or surface soil samples from industrial sites.

Effects of amendments of paper mill sludge and nutrients on soil surface CO2 flux in northern hardwood forests

Safe and economical disposal of paper mill sludge is a key consideration for forest products industry. A study was conducted to examine the effects of amendments of sludge and nutrients on soil surface CO2 flux （Rs） in northern hardwood forests and to quantify the relationship among Rs, soil temperature, and moisture in these stands. The experiment was a randomized complete block design that included sludge-amended, fertilized, and control treatments in sugar maple （Acer saccharum Marsh） dominated hardwood forests in the Upper Peninsula of Michigan, USA. Results showed that Rs was positively correlated to soil temperature （R^2 = 0.80, p 〈 0.001）, but was poorly correlated to soil moisture. Soil moisture positively affected the Rs only in the sludge-amended treatment. The Rs was significantly greater in the sludge-amended treatment than in the fertilized （p = 0.033） and the control （p = 0.048） treatments. The maximum Rs in the sludge-amended treatment was 8.8 μmol CO2 · m^ 2. s^-1, 91% and 126% greater than those in the fertilized （4.6 μmol CO2 · m^-2· s^-1） and control （3.9 μmol CO2· m^- 2· s^-1） treatments, respectively. The Rs did not differ significantly between the fertilized and control treatments. The difference in Rs between sludge-amended and the other treatments decreased with time following treatment.

Investigation on electromagnetic scattering from rough soil surface of layered medium using the small perturbation method

Electromagnetic scattering from a rough surface of layered medium is investigated, and the formulae of the scattering coefficients for different polarizations are derived using the small perturbation method. A rough surface with exponential correlation function is presented for describing a rough soil surface of layered medium, the formula of its scattering coefficient is derived by considering the spectrum of the rough surface with exponential correlation function; the curves of the bistatic scattering coefficient of HH polarization with variation of the scattering angle are obtained by numerical calculation. The influence of the permittivity of layered medium, the mean layer thickness of intermediate medium, the roughness surface parameters and the frequency of the incident wave on the blstatic scattering coefficient is discussed. Numerical results show that the influence of the permittivity of layered medium, the mean layer thickness of intermediate medium, the rms and the correlation length of the rough surface, and the frequency of the incident wave on the bistatic scattering coefficient is very complex.

Triangle Method for Estimating Soil Surface Wetness from Satellite Imagery in Allahabad District, Uttar Pradesh, India

Soil surface wetness is indispensable land surface parameter in agriculture, hydrology and environmental engineering. This paper explores the relationship between surface radiant temperature and fractional vegetation cover derived from satellite imagery to estimate soil surface wetness (triangle method) in Allahabad district. The pixel distributions create triangular shapes because the range of surface radiant temperature decreases as the amount of vegetation cover increases and sufficient number of pixels exists. A very weak correlation is found between the simulated soil surface wetness and ground measured soil moisture at deeper soil layers (R2 < 0.15) on all the dates under investigation. This is because the drying rates at the surface discontinue to be linearly correlated to that at lower levels (depths). The standing water pixels distort the shape of the triangle especially at lower left edge of the triangle. This distortion is removable. The spatial and temporal inhomogeneity of soil surface wetness is examined.

A performance evaluation of remotely sensed sea surface salinity products in combination with other surface measurements in reconstructing three-dimensional salinity fields

Several remotely sensed sea surface salinity（SSS） retrievals with various resolutions from the soil moisture and ocean salinity（SMOS） and Aquarius/SAC-D missions are applied as inputs for retrieving salinity profiles（S） using multilinear regressions. The performance is evaluated using a total root mean square（RMS） error, different error sources, and the feature resolutions of the retrieved S fields. In the mixed layer of the salinity, the SSS-S regression coefficients are uniformly large. The SSS inputs yield smaller RMS errors in the retrieved S with respect to Argo profiles as their spatial or temporal resolution decreases. The projected SSS errors are dominant, and the retrieved S values are more accurate than those of climatology in the tropics except for the tropical Atlantic, where the regression errors are abnormally large. Below that level, because of the influence of a sea level anomaly, the areas of high-accuracy S values shift to higher latitudes except in the high-latitude southern oceans, where the projected SSS errors are abnormally large. A spectral analysis suggests that the CATDS-0.25° results are much noisier and that the BEC-L4-0.25° results are much smoother than those of the other retrievals. Aquarius-CAP-1° generates the smallest RMS errors, and Aquarius-V2-1° performs well in depicting large-scale phenomena. BEC-L3-0.25°,which has small RMS errors and remarkable mesoscale energy, is the best fit for portraying mesoscale features in the SSS and retrieved S fields. The current priority for retrieving S is to improve the reliability of satellite SSS especially at middle and high latitudes, by developing advanced algorithms, combining both sensors, or weighing between accuracy and resolutions.

Normal Alkane Distributions in Soil Samples along a Lhasa-Bharatpur Transect

We present n-alkane distributions in the soil samples along a transect from Lhasa on the Tibetan Plateau to Bharatpur in Nepal, which covers a large geographical area and a wide range of climatic conditions. These data allow us to assess the significance of n-alkane distributions in different vegetation types and their relationships to temperature and precipitation. In the tropical rainforest and broadleaved forest zones, n-alkanes exhibit a bimodal distribution pattern with dominant homologues around n-C_（31） and n-C_（23）. The bimodal distribution of tropical rainforest n-alkanes may be a general pattern because of the presence of many lianas, epiphytic plants, algae and the strong microbial activity and degradation involved in the postdepositional process. In the warm-temperate mixed forest and needle-leaved forest zones, the long-chain alkanes have a pattern of n-C_（31） n-C_（33） n-C_（27）. In the alpine shrub and grassland zone, although the most abundant homologue is n-C_（31） , relatively high n-C_（23） concentrations have also been observed in some samples. The statistical results show a good correlation between n-alkane proxies and climatic factors. The average chain length（ACL） values are positively correlated with precipitation and temperature across the transect. The carbon preference index（CPI） values show a negative correlation with temperature and precipitation along a Lhasa–Bharatpur transect. Although there is a positive relationship between ACL and temperature, it is difficult to separate the two climatic variables（temperature and precipitation） because they are well coupled in the monsoon region.

Photocatalytic remediation of γ-HCH contaminated soil induced by α-Fe_2O_3 and TiO_2

Heterogeneous photocatalytic degradation of γ-HCH on soil surfaces was carried out to evaluate the photocatalytic effectiveness of α-Fe 2O 3 and TiO 2 toward degrading γ-HCH on soil surfaces. After being spiked with γ-HCH, soil samples were loaded with α-Fe 2O 3 or TiO 2 and exposed to UV-light irradiation. Different catalyst loads, 0%, 2%, 5%, 7%, and 10% (wt.)α-Fe 2O 3; 0%, 0.5%, 1%, 2:(wt.)TiO 2, were tested for up to 7 d irradiation. The effects of soil thickness, acidity, and humic substances were also investigated. The obtained results indicated that the γ-HCH photodegradation follows the pseudo-first-order kinetics. The addition of α-Fe 2O 3 or TiO 2 accelerates the photodegradation of γ-HCH, while the photodegradation rate decreases when the content of α-Fe 2O 3 exceeds 7%(wt.). The degradation rate increases with the soil pH value. Humic substances inhibit the photocatalytic degradation of γ-HCH. Pentachlorocyclohexene, tetrachlorocyclohexene, and trichlorobenzene are detected as photodegradation intermediates, which are gradually degraded with the photodegradation evolution.

Effects of shrub species and microhabitats on dew formation in a revegetation-stabilized desert ecosystem in Shapotou, northern China

Dew is an important supplement water source in arid and semi-arid areas. In order to determine the dew formation on different kinds of soils associated with various shrub species and microhabitats, we performed measurement of accumulated dew formation amount and duration in October 2009 in a revegetation-stabilized arid desert ecosystem in Shapotou area, northern China. The results indicated that the accumulated dew formation amount was four times larger at open spaces as compared to under the canopy, and it was nearly twice as much under living Artemisia ordosica plants（L.A.） as compared to under living Caragana korshinskii plants（L.C.）. The opposite characteristics were found for dew duration between different microhabitats. Dew amounts at different vertical heights around the shrub stands were in the order of 50 cm above the canopy〉the canopy edge〉under the canopy. Dew amount continued to increase after dawn, and the proportion of average accumulated dew amount after dawn accounting for the average maximum amount increased from above the canopy to under the canopy. Dew formation duration after sunrise accounted for more than 50% of the total formation duration during the day time. Contrary to the distribution characteristics of dew amount, dew duration after dawn and total dew formation duration during the day time were both highest under the canopy, followed by at the canopy edge and then at 50 cm above the canopy. The portion of dew duration after dawn accounting for the total dew duration during the day time increased from above the canopy to under the canopy. From these results, we may conclude that dew availability as a supplemental water resource for improving the microhabitats in water-limited arid ecosystems is position dependent especially for the plant microhabitats at different stands layers.