Separation/Analysis Rhodamine B by Anion Surfactant/Ionic Liquid Aqueous Two-Phase Systems Coupled with Ultraviolet Spectrometry

A novel method for the separation/analysis rhodamine B has been described. The ionic liquid (1-tetradecyl-3-methylimidazolium bromide)/anion surfactant (sodium dodecyl sulfate)/NaCl two-phase systems (ATPSs) is presented as a simple, rapid and effective sample pretreatment technique coupled with ultraviolet spectrometry for analysis rhodamine B in soft drink. The effects of parameters on the ATPSs extraction of rhodamine B such as amount of surfactant, ionic liquid and salt, pH, temperature, stabilization and centrifugal time have been studied in details. Under the optimized conditions, the linear range of calibration curve for rhodamine B was 0.05 - 7.0 μg·mL-1 and the detection limit was 3.2 ng·mL-1. The phase equilibrium and the mechanism of phase separation for ATPSs have been discussed. This method has been applied to the determination of rhodamine B in soft drink.

BiOBr nanosheets coupling with biomass carbon derived from locust leaves for enhanced photocatalytic degradation of rhodamine B

A series of BiOBr@biomass carbon derived from locust leaves materials(BiOBr@BC)were fabricated and the photocatalytic property was investigated for photocatalytic degradation of rhodamine B(RhB)under visible light.The morphology,structure and photoelectrochemical properties of the photocatalysts were characterized by means of SEM,TEM,XRD,XPS,FT-IR,BET,PL,UV-vis/DRS,and EIS techniques.The results showed that the introduction of BC significantly enhanced the photocatalytic activity.When the content of biomass carbon(BC)in a composite is 3%(based on the mass of BiOBr),the obtained BiOBr@BC-3 exhibits excellent photocatalytic activity,degrading 99%of RhB within 20 min.The excellent degradation efficiency after the introduction of BC can be attributed to the enhanced visible light absorption,narrower band gap,and fast electron-hole pair separation rate.The photocatalytic mechanism on the degradation of RhB was illustrated based on the radicals'trapping experiments and semiconductor energy band position.The proposed material is expected to be of significant application value in the field of wastewater treatment.

Construction and photocatalytic properties toward rhodamine B of CdS/Fe_(3)O_(4) heterojunction

A simple two-step hydrothermal method synthesized four different CdS/Fe_(3)O_(4)photocatalysts with varying ratios of mass of CdS to Fe_(3)O_(4).The composition and morphology of the prepared samples were investigated using X-ray diffraction(XRD),Raman spectrum,X-ray photoelectron spectroscopy(XPS),scanning electron microscopy(SEM),and transmission electron microscopy(TEM).Solid UV reflectance spectra testing found that CdS/Fe_(3)O_(4)nanocomposites had good light absorption throughout the spectral range,promoting their photocatalytic properties.Under visible light irradiation,CdS/Fe_(3)O_(4)(2∶5)with a mass ratio of 2∶5 exhibited excellent photocatalytic perfor-mance,with a degradation rate of 98.8%for rhodamine B.Furthermore,after five cycles of photocatalytic degrada-tion reaction,the rhodamine B degradation rate remained at 96.2%,indicating that the photocatalysts have good pho-tocatalytic stability.

Fabrication of a monoclinic/hexagonal junction in WO_3 and its enhanced photocatalytic degradation of rhodamine B

A series of WO3 samples with different crystalline phases were prepared by the thermal decomposition method from ammonium tungstate hydrate.X-ray diffraction（XRD）,scanning electron microscopy（SEM）,high-resolution transmission electron microscopy（HRTEM）,X-ray photoelectron spectroscopy,and N2 adsorption-desorption were used to characterize the crystalline phase,morphology,particle size,chemical composition,and surface area of the WO3 samples.The formation of hexagonal（h-WO3） and monoclinic（m-WO3） crystal structures of WO3 at different temperatures or different times was confirmed by XRD.m-WO3 is formed at 600 ℃,while m-WO3 starts to transform into h-WO3 at 800℃.However,h-WO3,which forms at 800℃,may transform into m-WO3 by increasing the calcination temperature to 1000℃.SEM results indicate that m-WO3 particles exhibit a bulky shape with heavy aggregates,while h-WO3 particles exhibit a rod-like shape.Moreover,m-WO3 crystals are sporadically patched on the surface of the h-WO3 rod-like particles,resulting in the exposure of both m-WO3 and h-WO3 on the surface.It is observed that the monoclinic phase（m-WO3）/hexagonal phase（h-WO3） junction was fabricated by tuning the calcination temperature and calcination time.The relative ratios between m-WO3 and h-WO3 in the phase junction can readily be tailored by control of the calcination time.The photocatalytic activities of WO3 with different crystalline phases were evaluated by the photocatalytic degradation of rhodamine B as a model pollutant.A higher photocatalytic activity was observed in the WO3 sample with the m-WO3/h-WO3junction as compared with the sample with only m-WO3.The improvement of photocatalytic activity can be attributed to the reduction of the electron-hole recombination rate owing to the formation of the phase junction,whose presence has been confirmed by HRTEM and photoluminescence spectra.

Surfactant Protein B 1580 Polymorphism Is Associated with Susceptibility to Chronic Obstructive Pulmonary Disease in Chinese Han Population

Summary: Whether surfactant protein B (SP-B)-18A/C and 1580C/T polymorphism were associated with susceptibility to chronic obstructive pulmonary disease (COPD) in Chinese Han population was investigated. After genomic DNA was isolated from blood of COPD smokers and control smokers, the genotypes of SP-B-18A/C and SP-B1580C/T polymorphism loci were determined by polymerase chain reaction-restriction fragment length polymorphism analysis (PCR-RFLP) respectively. The results showed that there was significant difference in genotypes distribution frequency of SP-B1580C/T polymorphism locus between COPD smokers and control smokers. C→T mutation rate (including TT homozygote and CT heterozygote) in COPD smokers was higher than in control smokers (57.9 % vs 41.7 %, χ2=4.93, P<0.05), whereas there was no significant difference in genotypes distribution frequency of SP-B1580-18A/C locus between COPD smokers and control smokers. The allele frequency (29.1 %) of SP-B1580-18A/C locus is lower than T allele (70.9 %) in Chinese Han Population, and the distribution was different from that in Mexican, in which, the A and T allele frequencies were 85 % and 15 % respectively. It was concluded that SP-B1580 T allele was probably associated with increased susceptibility to COPD in Chinese Han population; The polymorphism of SP-B-18A/C locus maybe varied with race.

Association of Surfactant Protein B Gene Polymorphisms (C/A-18, C/T1580, Intron 4 and A/G9306) and Haplotypes with Bronchopulmonary Dysplasia in Chinese Han Population

Summary： This study aimed to investigate the association between surfactant protein B （SP-B） pol- ymorphisms and bronchopulmonary dysplasia （BPD） in Chinese Han infants. We performed a case- control study including 86 infants with BPD and 156 matched controls. Genotyping was performed by sequence specific primer-polymerase chain reaction （PCR） and haplotypes were reconstructed by the fastPHASE software. The results showed that significant differences were detected in the geno- type distribution of C/A-18 and intron 4 polymorphisms of SP-B gene between cases and controls. No significant differences were detected in fhe genotype distribution of C/T1580 or A/G9306 be- tween the two groups. Haplotype analysis revealed that the frequency of A-del-C-A haplotype was higher in case group （0.12 to 0.05, P=0.003）, whereas the frequency of C-inv-C-A haplotype was higher in control group （0.19 to 0.05, P=0.000）. In addition, a significant difference was observed in the frequency of C-inv-T-A haplotype between the two groups. It was concluded that the polymor- phisms of SP-B intron 4 and C/A-18 could be associated with BPD in Chinese Han infants, and the del allele of intron 4 and A allele of C/A-18 might be used as markers of susceptibility in the disease. Haplotype analysis indicated that the gene-gene interactions would play an important part in deter- mining susceptibility to BPD.

Microwave photocatalytic degradation of Rhodamine B using TiO_2 supported on activated carbon:Mechanism implication

The photocatalytic degradation of Rhodamine B （RhB） was carried out using TiO2 supported on activated carbon （TiO2-AC） under microwave irradiation. Composite catalyst TiO2-AC was prepared and characterized using X-ray diffraction （XRD）, transmission electron microscopy （TEM） and Brunauer-Emmett-Teller （BET）. In the process of microwave-enhanced photocatalysis （MPC）, RhB （30 mg/L） was almost completely decoloured in 10 min, and the mineralization efficiency was 96.0% in 20 min. The reaction rate constant of RhB in MPC using TiO2-AC by pseudo first-order reaction kinetics was 4.16 times of that using Degussa P25. Additionally, according to gas chromatography/mass spectrometry （GC/MS） and liquid chromatography/mass spectrometry （LC/MS） identification, the major intermediates of RhB in MPC included two kinds of N-de-ethylation intermediates （N,N-diethyl-N＇-ethyl-rhodamine （DER））, oxalic acid, malonic acid, snccinic acid, and phthalic acid, maleic acid, 3-nitrobenzoic acid, and so on. The degradation of RhB in MPC was mainly attributed to the destruction of the conjugated structure, and then the intermediates transformed to acid molecules which were mineralized to water and carbon dioxide.

Photocatalytic degradation of Rhodamine B under visible light with Nd-doped titanium dioxide films

Microporous titanium dioxide films were prepared by the sol-gel methods on glass substrates, using tetrabutyl titanate as source material. In order to absorb the visible light and increase the photocatalytic activities, different concentrations of neodymium ions (Nd/Ti molar ratio was 0.5%, 0.7%, 0.9%, and 1.1% respectively) were added into the sol. X-ray diffraction (XRD), X-ray photoelectron spectros-copy (XPS), and atom force microscopy (AFM) were applied to characterize the modified films. A kind of typical textile industry pollutant (Rhodamine B) was used to evaluate the photocatalytic activities of the films under visible light. The results showed that the activities of the films were improved by doping Nd ions into the sol.

Detection of intermediates in the TiO_2-assisted photodegradation of Rhodamine B under visible light irradiation

The photocatalytic degradation of dye Rhodamine B （RhB） in the presence of TiO2 nanostdpe or P25 under visible light irradiation was investigated. The degradation intermediates were identified using Infrared spectra （IR spectra）, ^1H nuclear magnetic resonance （^1HNMR） spectra, and gas chromatography-mass spectroscopy （GC-MS）. The IR and the ^1HNMR results showed that the large conjugated chromophore structure of RhB was efficiently destroyed under visible light irradiation in both the photocatalytic systems （TiO2 nanostfipe or P25 and Rhodamine B systems）. GC-MS results showed that the main identified intermediates were ethanediotic acid, 1,2-benzenedicarboxylic acid, 4-hydroxy benzoic acid and benzoic acid, which were almost the same in the TiO2 nanostdpes and P25 systems. This work provides a good insight into the reaction pathway（s） for the TiO2-assisted photocatalytic degradation of dye pollutants under visible light irradiation.

Studies on the Recognition Interaction of Rhodamine B and DNA by Voltammetry

The recognition interaction of Rhodamine B(RB) with DNA was studied in a Britton-Robinson (B-R) buffer solution with pH=7.5 at a glassy carbon electrode by electrochemical techniques. RB shows an irreversible oxidation peak at +0.92 V(vs. SCE). After the addition of DNA in the RB solution, the peak current of RB decreased apparently without the shift of the peak potential. The electrochemical parameters such as the charge transfer coefficient α and the electrode reaction rate constant k s of the interaction system were carefully studied. The parameters did not change before and after the addition of DNA, which indicated that an electrochemical non-active complex had been formed, so the concentration of RB in the solution decreased and the peak current decreased correspondingly. The binding ratio of RB to DNA was 2∶1 with a binding constant of 2.66×10 9.

Green Oxygenation Degradation of Rhodamine B by Using Activated Molecule Oxygen

Iron(II) tetra-(1,4-dithin)-porphyrazine, (FePz(dtn)4) is able to activate molecule oxygen for oxygenation degradation of rhodamine B (RhB) in an extensive pH region without light excitation. Experiments indicate that the RhB can be degraded nearly 52% in alkaline aqueous solution, bubbling with dioxygen for seven hours in the presence of FePz(dtn)4 and the hydrogen peroxides as an active intermediate were determined by DPD method. The catalyst is recyclable and the catalyst activity was maintained after 10 recycles.

Electrochemical oxidation of rhodamine B by PbO_2/Sb-SnO_2/TiO_2 nanotube arrays electrode

A PbO2/Sb-SnO2/TiO2 nanotube array composite electrode was successfully synthesized and its electrochemical oxidation properties were investigated.Field-emission scanning electron microscopy(FE-SEM)and X-ray diffraction(XRD)results showed that the PbO2 coating was composed of anα-PbO2 inner layer and aβ-PbO2 outer layer.Accelerated life measurement indicated that the composite electrode had a lifetime of 815 h.Rhodamine B(RhB)was employed as a model pollutant to analyze the electrocatalytic activity of the electrode.The effects of initial RhB concentration,current density,initial pH,temperature,and chloride ion concentration on the electrochemical oxidation were investigated in detail.Inductively coupled plasma atomic emission spectroscopy(ICP-AES)results suggested that the concentration of leached Pb^2+in the electrolyte during the electrocatalytic oxidation process can be neglected.Finally,the degradation mechanism during the electrocatalytic oxidation process was proposed based on the results of solid-phase micro-extraction-gas chromatography-mass spectrometry(SPME-GC-MS).The high electrocatalytic performance of the composite electrode makes it a promising anode for the treatment of organic pollutants in aqueous solution.

Simultaneous Determination of Fluorescein, Rhodamine 6G and Rhodamine B in Turbid Solution by Polarization Variable-Angle Synchronous Fluorescence Spectrometry

Polarization variable-angle synchronous fluorescence spectrometry was proposed to determine samples in turbid solution. A mixture of fluorescein, rhodamine 6G and rhodamine B was used to evaluate the technique. The background caused by scattering light was decreased remarkably. The limits of detection were 0.6 ng/ml for fluorescein, 2.3 ng/ml for rhodamine 6G and 4.1 ng/ml for rhodamine B, respectively.

Enhanced Photocatalytic Denitrification Rhodamine Bover In2O3/Bi24O31Br10 Nanocomposites under Visible Light Irradiation

A novel In203/Bi24O31Br10 composite photocatalyst, where In2O3 nanoparticleswith the diameter of about 5-10 nm were tightly attached on the surface of Bi24O31Br10 plates, wasprepared by using hydrolysis, impregnation method and post-thermal process. Photocatalyticactivity was evaluated by the degradation of Rhodamine B under the visible light irradiation.Effects of the contents of In203 nanoparticles on the optical property and photocatalytic activity of In203/Bi24O31Br10 composite were also investigated. Compared with neat In203 and Bi24O31Brlomaterials, 15In203/Bi24O31Br10 composite exhibits the best photocatalytic activity owing to theefficient separation of photogenerated electron and hole pairs, which is evidenced byphotoluminence spectra. More than 95% of Rhodamine B solution can be degraded by15In203/Bi24O31Brlo sample in 30 min.

Electrochemical Studies of the Recognition Interaction of Rhodamine B with DNA

The recognition interaction of rhodamine B (RB) with DNA was studied in pH 7.5 Britton-Robinson (B-R) buffer solution by electrochemical techniques. An irreversible oxidation peak at glassy carbon electrode was obtained at +0.92V (vs. SCE). After the addition of DNA into the RB solution, the peak current of RB decreased apparently without the shift of peak potential. The electrochemical parameters such as the charge transfer coefficient a and the electrode reaction standard rate constant ks of RB in the absence and presence of DNA were determined, which did not change, indicating that a non-electroactive complex was formed, so the concentration of RB in the solution decreased and the peak current decreased correspondingly.

Photocatalytic Degradation of Rhodamine B Dye in Wastewater Using Gelatin/CuS/PVA Nanocomposites under Solar Light Irradiation

The crosslinked gelatin/CuS/PVA nanocomposite catalyst prepared using gamma irradiation as initiator was extensively characterized using several techniques including transmission electron microscopy (TEM), UV-Vis spectroscopy, infrared spectroscopy (IR) and X-ray diffraction (XRD). We chose Rhodamine B (RhB) dye as a model contaminant in order to investigate its Photocatalytic activity under solar light irradiation. The effects of pH, catalyst concentration and RhB concentration on degradation reaction were also investigated. Similar to the observed trend for the photocatalytic oxidation of other organic compounds, the efficiency of photocatalytic degradation of RhB tended to decrease with increasing the concentration of RhB. The degradation efficiency of RhB is found to increase as pH is increased up to pH of 10, then starts decreasing at pH values higher than 10. The degradation efficient of RhB is found to increase as the amount of the catalyst dosage increases up to an optimum value of 0.25 g. Increasing the concentrations of photocatalyst beyond 0.25 g was found to decrease the photocatalytic activity of RhB. It was proven that the degradation process of RhB reaction rate obeyed a pseudo-first-order reaction of the catalyst concentration of gelatin/CuS/PVA nanocomposite. The degradation kinetics was found to fit well Langmuir-Hinshelwood rate law. The results obtained showed that after using the catalyst five times repeatedly, the catalyst retained its efficiency and the rate of the degradation process was still above 80%.

Determination of Rhodamine B in Food Using HPLCUV Method

[ Objective] The aim was to establish a method for the determination of Rhodamine B in food by HPLC-UV. [ Metkod] Rhodamine B was extracted with acetone/hexane from food samples. After concentrated and purified by alumina cartridge, the Rhodamine B content in the food was determined by using high performance liquid chromatography with ultraviolet visible detector. [ Result] Within tile concentration range of 0.005 - 2.000 mg/kg, the peak area of Rhodamine B presented good linear relation with the concentration, and the related coefficient was 0.999 98. With high average recovery rate, the detection limit of the method was 0.005 mg/kg[ Concision] It is a fast and accurate method with high sensitivity to detect Rhodamine B in food.

Photocatalytic Degradation of Rhodamine B by Recyclable Ag Br/Polypyrrole(PPy)Nano-Catalysts

We investigated the removal of the organic dye rhodamine B in wastewater with recyclable AgBr/polypyrrole(PPy)nano-photocatalysts.With PPy as an active base for electron transfer,and hexadecyltrimethylammonium bromide(CTAB)as both the soft-templating agent and the bromine source,a series of AgBr/PPy nano-photocatalysts containing various proportions of silver were prepared in a convenient one-step synthesis procedure.The synthesized catalysts were characterized by TG analysis to reveal that,in comparison with pure PPy,the interaction between PPy and AgBr led to increased thermal stability.Chemical combination of PPy and AgBr was observed through XRD and XPS analyses.For the morphology study,the AgBr particles were found to be well dispersed in the PPy nanowire network from SEM results.In the photodegradation experiments,up to 92%rhodamine B was degraded by the AgBr/PPy catalysts in the period of 1 hour under 254 nm UV light.The catalysts could maintain 60%catalytic efficiency after 3 cycles in the recyclability test.

Ag-Co3O4：Synthesis,characterization and evaluation of its photo-catalytic activity towards degradation of rhodamine B dye in aqueous medium

Synthesis,characterization of Co_3O_4 and Ag-Co_3O_4 composites and evaluation of their photo-catalytic activities towards photo-degradation of aqueous solution of rhodamine B dye under irradiation of visible light have been described in this paper.Co_3O_4 was prepared by solid phase mechano chemical process using Co(NO_3)_2·6H_2O and NH_4 HCO_3 as precursor materials.Ag was deposited on Co_3O_4 from AgNO_3 using Calotropis gigantea extract as reducing agent.XRD,SEM and FTIR were used for characterization of prepared composites.Photo-catalytic efficiencies of as-prepared Co_3O_4 and Ag-Co_3O_4 were evaluated for aqueous phase photo-degradation of rhodamine B.It was found that deposition of Ag on Co_3O_4 highly enhanced the photo-catalytic activity of Co_3O_4.Photo-catalytic degradation followed the Eley–Rideal mechanism.About 100% and 91% photo-degradation of 40 ml dye solution achieved at 313 K in 90 and 120 min over 0.05 g of Ag-Co_3O_4 as photo-catalyst using 100 and 200 mg·L^(-1) as initial concentration of dye respectively.

Removal of Methylene Blue, Rhodamine B and Ammonium Ion from Aqueous Solution by Adsorption onto Sintering Porous Materials Prepared from Coconut Husk Waste

The present work was done in order to develop and find out suitable conversion methods for coconut husk wastes into value-added products. It is well-known that coconuts husk waste is hydrophobic therefore ethanol with different doses was used as a surfactant to enhance the removal efficiency. Treated samples at different adsorbent amounts, sintering temperatures & sintering time, stirring time, pH, and solution temperatures for color removal of Methylene Blue (MB) & Rhodamine B (RhB) and ammonium concentration were evaluated by using UV-Visible Spectroscopy. At 300°C, results showed complete removal for MB and more than 75% for RhB, whereas removal of ammonium ion reached around 52% when sintering product from husk waste was used. Further investigation was carried out for ammonium ion to understand the desorption kinetic behaviors and isotherm models. Kinetics indicated that desorption of ammonium ion followed pseudo-first order equation. Adsorption thermodynamic parameters such as ΔG, ΔH, and ΔS followed Van’t Hoff plot for adsorption and found to be negative which indicated that the adsorption process for ammonium onto coconut husk was physical, spontaneous and exothermic.