FPGA Based Speed Control of SRM with Optimized Switching Angles by Self Tuning

The electromagnetic torque and speed in Switched Reluctance Motor (SRM) greatly depend on the excitation parametersi.e. turn-on angle, turn-off angle, dwell angle and magnitude of the phase currents of its phases. At lower speeds, a change in the current contributes the torque requirement which can be achieved either by voltage control (pulse width modulation) or instantaneous current control techniques. At high speeds, due to high back EMF, the regulation of current is crucial and achieved with the control of switching angles of phases. This type of control is referred as average torque control, where the torque is averaged over one stroke (2π/Nr). With constant dwell angle, advancing the phase angle influences the current into the phase winding at minimum inductance position. It has more time to get the current out of the phase winding before the rotor reaches the negative inductance slope. To maintain the speed of the motor at different load conditions, the turn-on and turn-off angles are adaptively varied. The change in dwell angle may be required where the turn-on and turn-off angle may not be sufficient to reach the required speed. In this paper, a new algorithm is proposed for self tuning of switching parameters of SRM. The proposed algorithm is simulated in MATLAB-Simulink and experimentally validated with Field Programmable Gated Array (FPGA) using MATLAB- system generator environment.

Geochemistry and Petrogenesis of Late Cretaceous–Paleocene Granites from the Tengchong Block, Western Yunnan: Implications for Angle-switching of Subducting Slab

The Cenozoic geological hallmark of Western Yunnan is the characteristic voluminous Late Cretaceous-Eocene granites;however, their geological background and petrogenesis have not been well constrained and elucidated. In this study, we present new zircon U-Pb dating, along with geochemical and Sr-Nd-Hf isotopic data for granites from the Tengchong–Lianghe granitoid belt(as abbreviated to Tengliang belt) and West Yingjiang batholiths from the Tengchong block. The mineralogical and geochemical features of the Tengliang granites and the West Yingjiang batholiths are ascribed to aluminous S-type granites and weak peraluminous I-type, respectively. Zircon U-Pb analyses yielded consistent ages ranging from 67.5 Ma, 68.4 Ma and 66.2 Ma from the Tengliang granitoid belt and 50.4 Ma to 60.8 Ma for three samples from the west Yingjiang batholiths. The Tengliang granites were emplaced during the Late Cretaceous(68-66 Ma) and demonstrate negative ε_(Hf)(t) values(-24 to-4) and initial ~(87)Sr/~(86)Sr ratios of 0.7101–0.7139 and significant negative ε_(Nd)(t) values from-8.91 to-13.2, indicating a Proterozoic sedimentary source or enriched components. The hornblende-bearing I-type granites from West Yingjiang are characterized by lower initial ~(87)Sr/~(86)Sr ratios of 0.7076–0.7106, compared to Tengliang granite and negative whole-rock ε_(Nd)(t) values from-4.0 to-11.9. The early Eocene west Yingjiang gneissic granites show wide ranges of ε_(Hf)(t) values from +7.4 to-8.5 and T_(2DM) of 1.30–0.65 Ga, indicating partial melting of ancient crust with contributions of depleted mantle materials. In combination with the regional background and previous studies, we propose that such a spatio-temporal distribution of the Tengchong granitoid belt might be related to the rollback or angleswitching of the Neo-Tethyan subducting slab. This study sheds new light on the evolutionary history of the Tengchong block.

Minimization of Switching Devices and Driver Circuits in Multilevel Inverter

The various configurations of multilevel inverter involve the use of more numbers of switching devices, energy storage devices and/or unidirectional devices. Each switching unit necessitates the add-on driver circuit for proper functionality. Cascaded H-Bridge Multilevel Inverter requires overlapped switching pulses for the switching devices in positive and negative arms of the bridge which may lead to short circuit during the device failure. This work addresses the problems in different configurations of multilevel inverter by using reduced number of switching and energy storage devices and driver circuits. In the present approach Single Switch is used for each stair case positive output and single H-Bridge for phase reversal. Driver circuits are reduced by using the property of body diode of the MOSFET. Switching pulses are generated by Arduino Development Board. The circuit is simulated using Matlab. More so, through experimental means, it is physically tested and results are analyzed for the 5-step inverter and thereby simulation is fully validated. Consequently, cycloconverter operation of the circuit is simulated using Matlab. Moreover, half bridge configuration of the multilevel inverter is also analyzed for high frequency induction heating applications.

Deflection angle switching with a metasurface based on phase-change nanorods [Invited]

We propose the active metasurface using phase-change material Ge2Sb2Te5（GST）, which has two distinct phases so called amorphous and crystalline phases, for an ultrathin light path switching device. By arranging multiple anisotropic GST nanorods, the gradient metasurface, which has opposite directions of phase gradients at the two distinct phases of GST, is demonstrated theoretically and numerically. As a result, in the case of normal incidence of circularly polarized light at the wavelength of 1650 nm, the cross-polarized light deflects to-55.6° at the amorphous phase and ＋55.6° at the crystalline phase with the signal-to-noise ratio above 10 dB.