This paper describes current situation and special requirements of local electric power communication network in China. The paper discusses the disadvantages of SDH and fiber loop carrier system applied to electric po...This paper describes current situation and special requirements of local electric power communication network in China. The paper discusses the disadvantages of SDH and fiber loop carrier system applied to electric power communication network. It presents a new Communication System-IDS-2000 integrated digital communication system. The paper introduces the characteristics and application of IDS-2000 system in the local electric power communication network.展开更多
The power communication network is a separate network from the power grid whose primary purpose is to ensure the power grid's safe operation.This paper expounds the composition of the comprehensive network managem...The power communication network is a separate network from the power grid whose primary purpose is to ensure the power grid's safe operation.This paper expounds the composition of the comprehensive network management architecture of the power communication data network and the implementation of the data acquisition module in the network management system through theoretical analysis,for the reference of relevant personnel,in order to better promote the collection of power grid communication network data.展开更多
The paper dwells on the unified power quality indexes characterizing the phenomenon of voltage unbalance in three-phase systems. Voltage unbalance is one of the commonest occurrences in the town mains of 0.38 kV volta...The paper dwells on the unified power quality indexes characterizing the phenomenon of voltage unbalance in three-phase systems. Voltage unbalance is one of the commonest occurrences in the town mains of 0.38 kV voltage. The phenomenon describes as inequality of vector magnitude of phase voltage and shearing angle between them. Causes and consequences of the voltage unbalance in distribution networks have been considered. The algorithm, which allows switching one-phase load, has been developed as one of the methods of reducing the unbalance level. The algorithm is written in the function block diagram programming language. For determining the duration and magnitude of the unbalance level it is proposed to introduce the forecasting algorithm. The necessary data for forecasting are accumulated in the course of the algorithm based on the Function Block Diagram. The algorithm example is given for transforming substation of the urban electrical power supply system. The results of the economic efficiency assessment of the algorithm implementation are shown in conclusion. The use of automatic switching of the one-phase load for explored substation allows reducing energy losses (active electric energy by 7.63%;reactive energy by 8.37%). It also allows improving supply quality to a consumer. For explored substation the average zero-sequence unbalance factor has dropped from 3.59% to 2.13%, and the negative-sequence unbalance factor has dropped from 0.61% to 0.36%.展开更多
为了满足电动汽车动力锂电池的充电需求,文中提出基于MERS(Magnetic Energy Recovery Switch,磁能再生开关)的LCL谐振型无线电能传输系统。该系统仅通过改变副边MERS的导通角,即可实现三种工作模式:恒流输出模式、恒压输出模式和最大功...为了满足电动汽车动力锂电池的充电需求,文中提出基于MERS(Magnetic Energy Recovery Switch,磁能再生开关)的LCL谐振型无线电能传输系统。该系统仅通过改变副边MERS的导通角,即可实现三种工作模式:恒流输出模式、恒压输出模式和最大功率输出模式。文中提出了系统模型,分析了LCL谐振型ICPT系统满足恒压、恒流、最大功率输出三种工作状态的条件;研究并建立了MERS的数学模型;搭建了Simulink仿真模型,仿真结果表明,本系统仅通过控制副边MERS的导通角α一个参数,可以实现电动汽车动力锂电池“先恒流后恒压”的充电需求,也可以实现当系统互感系数变化时系统维持在最佳工作点,而无需改变其他系统网络参数。该方案对改进电动汽车无线充电系统有一定的参考价值。展开更多
文摘This paper describes current situation and special requirements of local electric power communication network in China. The paper discusses the disadvantages of SDH and fiber loop carrier system applied to electric power communication network. It presents a new Communication System-IDS-2000 integrated digital communication system. The paper introduces the characteristics and application of IDS-2000 system in the local electric power communication network.
文摘The power communication network is a separate network from the power grid whose primary purpose is to ensure the power grid's safe operation.This paper expounds the composition of the comprehensive network management architecture of the power communication data network and the implementation of the data acquisition module in the network management system through theoretical analysis,for the reference of relevant personnel,in order to better promote the collection of power grid communication network data.
文摘The paper dwells on the unified power quality indexes characterizing the phenomenon of voltage unbalance in three-phase systems. Voltage unbalance is one of the commonest occurrences in the town mains of 0.38 kV voltage. The phenomenon describes as inequality of vector magnitude of phase voltage and shearing angle between them. Causes and consequences of the voltage unbalance in distribution networks have been considered. The algorithm, which allows switching one-phase load, has been developed as one of the methods of reducing the unbalance level. The algorithm is written in the function block diagram programming language. For determining the duration and magnitude of the unbalance level it is proposed to introduce the forecasting algorithm. The necessary data for forecasting are accumulated in the course of the algorithm based on the Function Block Diagram. The algorithm example is given for transforming substation of the urban electrical power supply system. The results of the economic efficiency assessment of the algorithm implementation are shown in conclusion. The use of automatic switching of the one-phase load for explored substation allows reducing energy losses (active electric energy by 7.63%;reactive energy by 8.37%). It also allows improving supply quality to a consumer. For explored substation the average zero-sequence unbalance factor has dropped from 3.59% to 2.13%, and the negative-sequence unbalance factor has dropped from 0.61% to 0.36%.
文摘为了满足电动汽车动力锂电池的充电需求,文中提出基于MERS(Magnetic Energy Recovery Switch,磁能再生开关)的LCL谐振型无线电能传输系统。该系统仅通过改变副边MERS的导通角,即可实现三种工作模式:恒流输出模式、恒压输出模式和最大功率输出模式。文中提出了系统模型,分析了LCL谐振型ICPT系统满足恒压、恒流、最大功率输出三种工作状态的条件;研究并建立了MERS的数学模型;搭建了Simulink仿真模型,仿真结果表明,本系统仅通过控制副边MERS的导通角α一个参数,可以实现电动汽车动力锂电池“先恒流后恒压”的充电需求,也可以实现当系统互感系数变化时系统维持在最佳工作点,而无需改变其他系统网络参数。该方案对改进电动汽车无线充电系统有一定的参考价值。
