Selective synthesis of ethanol from syngas under the Co-based catalysts is still challenging due to the hard of regulating the active site Co^(0) and Co^(2+)ratio.In this work,a series of CaTi_(0.9-x)Co_(x)Mo_(0.1)O_(...Selective synthesis of ethanol from syngas under the Co-based catalysts is still challenging due to the hard of regulating the active site Co^(0) and Co^(2+)ratio.In this work,a series of CaTi_(0.9-x)Co_(x)Mo_(0.1)O_(3)(x=0,0.1-0.4)and CaTi_(0.7)Co_(0.3)O_(3) catalysts were prepared by using citric acid complexation method to promote the synthesis of ethanol.It was found that Mo species in the perovskite lattice can regulate the Co^(0) and Co^(2+)ratio through the domain-limiting effect of perovskite and the degree of Co reduction could be adjusted by changing the Co/Mo molar ratio.Among these investigated catalysts,the total selectivity of alcohols over the catalyst with the optimal Co/Mo ratio CaTi_(0.6)Co_(0.3)Mo_(0.1)O_(3) reached 39.1%,with ethanol accounting for 74.7%,which was ascribed to the moderate and tightly bound ratio of dissociative to non-dissociative adsorption sites on the surface and the balance of CH_(x)-CH_(y) coupling and C^(O) insertion.展开更多
Direct conversion of syngas to aromatics has great potential to decrease fossil fuel dependence.Here,a unique structured hybrid catalyst composed of Fe_(3)O_(4) nanoparticles intimately dispersed inside an acidic zeol...Direct conversion of syngas to aromatics has great potential to decrease fossil fuel dependence.Here,a unique structured hybrid catalyst composed of Fe_(3)O_(4) nanoparticles intimately dispersed inside an acidic zeolite is developed.1 to 4 nm sized Fe_(3)O_(4) nanoparticles end up evenly dispersed in an acidic and slightly mesoporous Al-ZSM-5 based on Fe_(3)O_(4) restructuring during co-hydro thermal synthesis using organosilane modification.A very high aromatic productivity of 214 mmolaromatics h^(-1) gFe^(-1) can be obtained with a remarkable 62%aromatic selectivity in hydrocarbons.This catalyst has excellent sintering resistance ability and maintains stable aromatics production over 570 h.The synthetic insights that postulate a mechanism for the metastable oxide-zeolite reorganization during hydrothermal synthesis could serve as a generic route to sinter-resistant oxide-zeolite composite materials with uniform,well-dispersed oxide nanoparticles in close intimacy with-and partially confined in-a zeolite matrix.展开更多
In the conversion process of syngas-to-C_(2)species,the OH species are inevitably produced accompanying the production of key intermediates CH_(x)(x=1-3),traditionally,the function of surface OH species is generally a...In the conversion process of syngas-to-C_(2)species,the OH species are inevitably produced accompanying the production of key intermediates CH_(x)(x=1-3),traditionally,the function of surface OH species is generally accepted as the hydrogenating reactive species.This work for the first time proposed and confirmed the assisted catalytic mechanism of surface OH species that performed as the promoter for syngas-to-C_(2)species on Cu-based catalysts.DFT and microkinetic modeling results reveal that the produced OH species accompanying the intermediates CH_(x)production on the MCu(M=Co,Fe,Rh)catalysts can stably exist to form OH/MCu catalysts,on which the presence of surface OH species as the promoter not only presented better activity and selectivity toward CH_(x)(x=1-3)compared to MCu catalysts,but also significantly suppressed CH_(3)OH production,providing enough CH_(x)sources to favor the production of C_(2)hydrocarbons and oxygenates.Correspondingly,the electronic properties analysis revealed the essential relationship between the electronic feature of OH/MCu catalysts and catalytic performance,attributing to the unique electronic micro-environment of the catalysts under the interaction of surface OH species.This new mechanism is called as OH-assisted catalytic mechanism,which may be applied in the reaction systems related to the generation of OH species.展开更多
Direct conversion of syngas to aromatics(STA)over oxide-zeolite composite catalysts is promising as an alternative method for aromatics production.However,the structural effect of the oxide component in composite cata...Direct conversion of syngas to aromatics(STA)over oxide-zeolite composite catalysts is promising as an alternative method for aromatics production.However,the structural effect of the oxide component in composite catalysts is still ambiguous.Herein,we investigate the size effect by selecting ZnCr_(2)O_(4)spinel,as a probe oxide,mixing with H-ZSM-5 zeolite as a composite catalyst for STA reaction.The CO conversion,aromatics selectivity and space-time yield(STY)of aromatics are all significantly improved with the crystal size of ZnCr_(2)O_(4)oxide decreases,which can mainly attribute to the higher oxygen vacancy concentration and thus the rapid generation of more C1oxygenated intermediate species.Based on the understanding of the size-performance relationship,ZnCr_(2)O_(4)-400 with a smaller size mixing with H-ZSM-5 can achieve32.6%CO conversion with 76%aromatics selectivity.The STY of aromatics reaches as high as 4.79 mmol g_(cat)^(-1)h^(-1),which outperforms the previously reported some typical catalysts.This study elucidates the importance of regulating the size of oxide to design more efficient oxidezeolite composite catalysts for conversion of syngas to value-added chemicals.展开更多
Oxide-Zeolite(OX-ZEO) bifunctional catalyst design concept has been exemplified in several processes to direct conversion syngas to value-added chemicals and fuels such as mixed light olefins, ethylene, aromatics and ...Oxide-Zeolite(OX-ZEO) bifunctional catalyst design concept has been exemplified in several processes to direct conversion syngas to value-added chemicals and fuels such as mixed light olefins, ethylene, aromatics and gasoline.Herein we demonstrate that the product can be steered toward liquefied petroleum gas(LPG) with a selectivity up to 89% in hydrocarbons especially propane selectivity reaching 80% at CO conversion of 63% using ZnCrOx-H-SSZ-39 catalyst.Interestingly, the quantity of the acid sites of SSZ-39 does not influence obviously the hydrocarbon distribution but the strength is crucial for selective formation of propane.This finding provides an alternative route of LPG synthesis from a variety of carbon resources via syngas.展开更多
This research focused on the feasibility of applying the forward and reverse combustion approach to the in situ gasification of lignite with the production of hydrogen-rich syngas(H_(2)and CO).The so-called forward co...This research focused on the feasibility of applying the forward and reverse combustion approach to the in situ gasification of lignite with the production of hydrogen-rich syngas(H_(2)and CO).The so-called forward combustion gasification(FCG)and reverse combustion gasification(RCG)approach in which oxygen and steam are simultaneously fed to the simulated system of underground coal gasification(UCG)was studied.A simulated system of UCG was designed and established.The underground conditions of the coal seam and strata were simulated in the system.The combustion gasification of lignite has been carried out experimentally for almost 6.5 days.The average effective content(H_(2)+CO)of syngas during the FCG phase was 62.31%and the maximum content was 70.92%.For the RCG phase the corresponding figures are 61.33%and 67.91%.Thus,the feasibility of using RCG way for UCG has been demonstrated.The temperature profiles have been provided by using of 85 thermocouples during the model experiment,which portrayed the several nephograms of thermal data in the gasifier were of significance for the prospective gasification processes.展开更多
In this work,syngas methanation over Ni-W/TiO2-SiO2catalyst was studied in a fluidized-bed reactor(FBR)and its performance was compared with a fixed-bed reactor(FIXBR).The effects of main operating variables including...In this work,syngas methanation over Ni-W/TiO2-SiO2catalyst was studied in a fluidized-bed reactor(FBR)and its performance was compared with a fixed-bed reactor(FIXBR).The effects of main operating variables including feedstock gases space velocity,coke content,bed temperature and sulfur-tolerant stability of 100 h life were investigated.The structure of the catalysts was characterized by XRD,N2adsorptiondesorption and TEM.It is found that under same space velocity from 5000 h 1to 25000 h 1FBR gave a higher CH4yield,lower coke content,and lower bed temperature than those obtained in FIXBR.Ni-W/TiO2-SiO2catalyst possessed excellent sulfur-tolerant stability on the feedstock gases less than 500 ppm H2S in FBR.The carbon deposits formed on the spent catalyst were in the form of carbon fibers in FBR,while in the form of dense accumulation distribution appearance in FIXBR.展开更多
A series of Cu-based catalysts were developed for alkylation of benzene with syngas. The catalyst samples were prepared by the impregnation method, and were characterized by XRD, XRF, NH3-TPD, and TEM and evaluated in...A series of Cu-based catalysts were developed for alkylation of benzene with syngas. The catalyst samples were prepared by the impregnation method, and were characterized by XRD, XRF, NH3-TPD, and TEM and evaluated in a fixed bed reactor. The optimized reaction temperature of Cu/Al2O3/ZSM-5 catalyst was 350 ℃, while higher contents of copper were conducive to alkylation of benzene with syngas. The new medium strength acid centers in the catalyst created by Cu were beneficial to alkylation. Hydrogenation reaction of CO was executed on the metal centers without dissociation, Dimethyl ether(DME) was the major intermediate over Cu-based catalysts. Higher selectivity of methylation and lower selectivity of heavy aromatics were confirmed after the second metal(Zn, Mn, or V) was added to the copper catalyst. Cu was partly covered by Zn in the Cu-Zn/Al2O3/ZSM-5 catalyst leading to low dispersion and low activity of copper. Cu-Mn/Al2O3/ZSM-5 catalyst possessed the best yield of methylation product. Cu-Mn composite oxides were probably formed in fresh catalyst, which blocked the sintering of Cu in the reaction process. The loading of Cu decreased dramatically after the introduction of V, while causing an increase of the amount of medium strength acid centers at the same time. V prevented the sintering of copper particles during the reducing process and had a promoting effect on the activity of Cu.展开更多
The nanosheets structured K–Co–MoS_2 catalyst was prepared through a one-step hydrothermal synthesis combined with the wetness impregnation. The fresh catalyst has a high dispersion of Co–Mo–S active phase and no ...The nanosheets structured K–Co–MoS_2 catalyst was prepared through a one-step hydrothermal synthesis combined with the wetness impregnation. The fresh catalyst has a high dispersion of Co–Mo–S active phase and no Co_9S_8 is found. The pure H_2 activated catalyst shows a higher intrinsic activity, especially the C_(2+) OH selectivity for the higher alcohol synthesis compared to the one activated by 5% H_2/N_2 atmosphere. The reason is attributed to that the pure H_2 activation more effectively suppresses the formation of Co_9S_8 and stabilizes the Co–Mo–S active phase during the reaction due to the formation of SH species.展开更多
Photocatalytic reduction of CO2 with H2 O to syngas is an effective way for producing high value-added chemical feedstocks such as methanol and light olefins in industry.Nevertheless,the precise control of CO/H2 ratio...Photocatalytic reduction of CO2 with H2 O to syngas is an effective way for producing high value-added chemical feedstocks such as methanol and light olefins in industry.Nevertheless,the precise control of CO/H2 ratio from photocatalytic CO2 reduction reaction still poses a great challenge for the further application.Herein,we prepared a series of highly efficient heterostructure based on highly dispersed palladium supported on ultrathin Co Al-layered double hydroxide(LDH).In conjunction with a Ru-complex sensitizer,the molar ratios of CO/H2 can be tuned from 1:0.74 to 1:3 under visible-light irradiation(λ>400 nm).More interestingly,the syngas can be obtained under light irradiation atλ>600 nm.Structure characterization and density functional theory calculations revealed that the remarkable catalytic activity can be due to the supported palladium,which improved the charge transfer efficiency.Meanwhile,more H atoms were used to generate H2 on the supported palladium for further tunable CO/H2 ratio.This work demonstrates a new strategy for harnessing abundant solar-energy to produce syngas from a CO2 feedstock.展开更多
CexZr1-xO2 mixed oxides with different Ce/Zr ratios were prepared by coprecipitation. The characterizations of mixed oxides were studied by X-ray diffraction (XRD) and H2-TPR. And the performances were tested in a fix...CexZr1-xO2 mixed oxides with different Ce/Zr ratios were prepared by coprecipitation. The characterizations of mixed oxides were studied by X-ray diffraction (XRD) and H2-TPR. And the performances were tested in a fixed-bed quartz reactor. The results indicated that lattice oxygen of CexZr1-xO2 could oxidate methane to syngas and the incorporation of zirconium into the ceria lattice could improve the O2- mobility. The Ce0.7Zr0.3O2 had the best activity in investigative temperature ranging from 600 to 900 ℃. Effects of reaction time on H2/CO ratio were studied at 850 ℃ when using Ce0.7Zr0.3O2 as catalyst. The results indicated that the ratio was closed to 2 values in the first 10 min, however, it rapidly increased with reaction time after >10 min. The possible reason was that the direct partial oxidation of methane reaction was dominant in the first 10 min. However, the methane pyrogenation was responsible for the rapid increase of H2/CO ratio after 10 min. Thus, if syngas with H2/CO ratio of 2 wanted to be obtained, the reaction time needed to be controlled.展开更多
Visible-light-driven CO2 photoreduction to achieve renewable materials,such as syngas,hydrocarbons,and alcohols,is a key process that could relieve environmental problems and the energy crisis simultaneously.Reduction...Visible-light-driven CO2 photoreduction to achieve renewable materials,such as syngas,hydrocarbons,and alcohols,is a key process that could relieve environmental problems and the energy crisis simultaneously.Reduction of syngas products with diff erent H2:CO proportions is highly expected to produce high value-added chemicals in the industry.However,the development of technologies employing long-wavelength irradiation to achieve CO2 photoreduction and simultaneous tuning of the resultant H2:CO proportion remains a challenging endeavor.In this work,we carried out interfacial engineering by designing a series of heterostructured layered double-hydroxide/MoS2 nanocomposites via electrostatic self-assembly.The syngas proportion(H 2:CO)obtained from CO2 photoreduction could be modulated from 1:1 to 9:1 by visible-light irradiation(λ>400 nm)under the control of the interface-rich heterostructures.This work provides a cost-eff ective strategy for solar-tofuel conversion in an artificial photosynthetic system and describes a novel route to produce syngas with targeted proportions.展开更多
Ordered mesoporous copper incorporated Al_2O_3(Cu/Al_2O_3) with high Cu dispersion were prepared by a facile solution combustion synthesis method using aluminum nitrate and copper nitrate as oxidants and urea as fuel....Ordered mesoporous copper incorporated Al_2O_3(Cu/Al_2O_3) with high Cu dispersion were prepared by a facile solution combustion synthesis method using aluminum nitrate and copper nitrate as oxidants and urea as fuel. It is a facile and green route to synthesize catalysts for dimethyl ether directly from syngas. Cu/Al_2O_3 catalysts were characterized by XRD, N_2 adsorption–desorption, SEM-EDS, and H_2-TPR.The results indicate that the catalysts obtain an ordered mesoporous structure and copper is homogenously dispersed. The mesoporous Cu/Al_2O_3 catalysts were utilized as bifunctional catalysts in syngas to dimethyl ether reaction(STD). The copper content affects the catalytic performance in STD reaction. The CO conversion and DME selectivity of Cu/Al_2O_3 with 15% copper molar ratio achieve 52.9% and 66.1%,respectively. Moreover, the mesoporous Cu/Al_2O_3 catalysts show excellent stability in STD reaction.展开更多
Surface chemistry modification represents a promising strategy to tailor the adsorption and activation of reaction intermediates for enhancing activity.Herein,we designed a surface oxygen-injection strategy to tune th...Surface chemistry modification represents a promising strategy to tailor the adsorption and activation of reaction intermediates for enhancing activity.Herein,we designed a surface oxygen-injection strategy to tune the electronic structure of SnS_(2) nanosheets,which showed effectively enhanced electrocatalytic activity and selectivity of CO_(2) reduction to formate and syngas(CO and H_(2)).The oxygen-injection SnS_(2) nanosheets exhibit a remarkable Faradaic efficiency of 91.6%for carbonaceous products with a current density of 24.1 mA cm^(−2) at−0.9 V vs RHE,including 83.2%for formate production and 16.5%for syngas with the CO/H_(2) ratio of 1:1.By operando X-ray absorption spectroscopy,we unravel the in situ surface oxygen doping into the matrix during reaction,thereby optimizing the Sn local electronic states.Operando synchrotron radiation infrared spectroscopy along with theoretical calculations further reveals that the surface oxygen doping facilitated the CO_(2) activation and enhanced the affinity for HCOO*species.This result demonstrates the potential strategy of surface oxygen injection for the rational design of advanced catalysts for CO_(2) electroreduction.展开更多
Realizing high CO conversion and high aromatics selectivity simultaneously in syngas-to-aromatics(STA)reaction is still challenging.Herein,we report a 57.5%CO conversion along with 74%aromatics selectivity over a comp...Realizing high CO conversion and high aromatics selectivity simultaneously in syngas-to-aromatics(STA)reaction is still challenging.Herein,we report a 57.5%CO conversion along with 74%aromatics selectivity over a composite catalyst consisting of Fe/ZnCr_(2)O_(4)(Fe modified ZnCr_(2)O_(4)spinel)oxide and H-ZSM-5 zeolite.Impregnation of only 3 wt%of Fe onto ZnCr_(2)O_(4)can remarkably increase CO conversion without sacrificing the aromatics selectivity.Oxygen vacancy concentration is improved after impregnating Fe.The highly dispersed iron carbide species is formed during the reaction over Fe/ZnCr_(2)O_(4)spinel oxide.The synergistic effect of oxygen vacancy and iron carbide results in a rapid formation of abundant oxygenated intermediate species,which can be continuously transformed to aromatics in H-ZSM-5.This study provides a new insight into the design of highly efficient catalyst for syngas conversion.展开更多
Highly active and selective Ni-based catalysts for partial oxidation of methane (POM) to syngas (CO/H,) have been studied and developed. Spectroscopic characterization by XRD, XPS, EPR, etc. demonstrated that under th...Highly active and selective Ni-based catalysts for partial oxidation of methane (POM) to syngas (CO/H,) have been studied and developed. Spectroscopic characterization by XRD, XPS, EPR, etc. demonstrated that under the POM reaction conditions, the Ni-components of the catalysts investigated were reduced and enriched on the surface to form metallic Ni0-phase. A comparative study of the first series of transition-metals showed that only Ni and Co have a high POM activity and selectivity, whereas the others (including Mn, Fe, Cu, etc. ) give mainly complete combustion products, Co, and H2O. The results favor the following viewpoints: the PoM activity is related with the rapidly changeable valence transitionmetal sites, M0/M2+ (e. g. Ni0/Ni2+ ), on the surface of the functioning catalysts;the transition-metal sites in zero-valence state seem to be responsible for the activation and dehydrogenation of methane by homolytic splitting of its C-H bonds on these sites. and the nature of rapidly changeable valence of the active sties is requisite for activation and rapid conversion of dioxygen.展开更多
In this paper, Ni/Zr–Yb–O catalysts with different sodium contents are prepared by a co-precipitation method, using aqueous Na2CO3 solution as a precipitant, and the effect of sodium on the catalyst structure and ca...In this paper, Ni/Zr–Yb–O catalysts with different sodium contents are prepared by a co-precipitation method, using aqueous Na2CO3 solution as a precipitant, and the effect of sodium on the catalyst structure and catalytic performance for syngas methanation is extensively investigated using five Ni/Zr–Yb–O catalysts, containing 0, 0.5, 1.5,4.5 and 13.5 wt% Na^+, those are denoted as Cat-1, Cat-2, Cat-3, Cat-4 and Cat-5 respectively. It is found that the interaction between Ni and support determines the catalytic performance of Ni/Zr–Yb–O and the residual sodium content negatively affects the interaction between Ni and support. Cat-1 exhibits an excellent catalytic performance.During a long run time of 380 h, no deactivation is observed and both CO conversion and CH4 selectivity maintain a level above 90%. However, Cat-3 and Cat-5 suffer rapid deactivation under the same reaction condition. The characterization results indicate the strong interaction between Ni and support enables Cat-1 to possess well dispersed Ni species, resistance to sintering and carbon deposition and thus the excellent catalytic performance. However, the presence of sodium ions over Ni/Zr–Yb–O degrades the interaction between Ni and support and the catalytic performance, especially for the stability. The relative weak interaction between Ni and support results in severe sintering of both ZrO2 and Ni under the reaction condition, carbon deposition and the poor catalytic performance.展开更多
The chemical looping reforming of methane through the nonstoichiometric ceria redox cycle(CeO2/CeO2-δ) has been experimentally investigated in a directly irradiated solar reactor to convert both solar energy and meth...The chemical looping reforming of methane through the nonstoichiometric ceria redox cycle(CeO2/CeO2-δ) has been experimentally investigated in a directly irradiated solar reactor to convert both solar energy and methane to syngas in the temperature range 900–1050 °C. Experiments were carried out with different ceria shapes via two-step redox cycling composed of endothermic partial reduction of ceria with methane and complete exothermic re-oxidation of reduced ceria with H2 O/CO2 at the same operating temperature, thereby demonstrating the capability to operate the cycle isothermally. A parametric study considering different ceria macrostructure variants(ceria packed powder, ceria packed powder mixed with inert Al2 O3 particles, and ceria reticulated porous foam) and operating parameters(methane flow-rate, reduction temperature, or sintering temperature) was conducted in order to unravel their impact on the bed-averaged oxygen non-stoichiometry(δ), syngas yield, methane conversion, and solar reactor performance. The ceria cycling stability was also experimentally investigated to demonstrate repeatable syngas production by alternating the flow between CH4 and H2 O(or CO2). A decrease in sintering temperature of the ceria foam was beneficial for increasing syngas selectivity, methane conversion,and reactor performance. Increasing both CH4 concentration and reduction temperature enhanced δ with the maximum value up to 0.41 but concomitantly favored CH4 cracking reaction. The ceria reticulated porous foam showed better performance in terms of effective heat transfer, due to volumetric absorption of concentrated solar radiation and uniform heating with lower solar power consumption, thereby promoting the solar-to-fuel energy conversion efficiency that reached up to 5.60%. The energy upgrade factor achieved during cycle was up to 1.19. Stable patterns in the δ and syngas yield for consecutive cycles with the ceria foam validated material performance stability.展开更多
A series of ZnO-ZrO_(2) solid solutions with different Zn contents were synthesized by the urea coprecipitation method,which were coupled with H-ZSM-5 zeolite to form bifunctional catalysts.As a new benzene alkylation...A series of ZnO-ZrO_(2) solid solutions with different Zn contents were synthesized by the urea coprecipitation method,which were coupled with H-ZSM-5 zeolite to form bifunctional catalysts.As a new benzene alkylation reagent,syngas was used instead of methanol to realize the efficient conversion of syngas and benzene into toluene and xylene.A suitable ratio of ZnO-ZrO_(2) led to the significant improvement in the catalytic performance,and a suitable amount of acid helped to increase the selectivity of toluene/xylene and reduce the selectivity of the by-products ethylbenzene and C^(9+) aromatics.The highest benzene conversion of 89.2%and toluene/xylene selectivity of 88.7%were achieved over 10%ZnO-ZrO_(2)&H-ZSM-5(Si/Al=23)at a pressure of 3 MPa and a temperature of 450℃.In addition,the effect of the zeolite framework structure on product distribution was examined.Similar to the molecular dynamics of aromatic hydrocarbons,H-ZSM-5 zeolites comprise 10-membered-ring pores,which are beneficial to the activation of benzene;hence,the conversion of benzene is higher.H-ZSM-35 and HMOR zeolites exhibited small eight-membered-ring channels,which were not conducive to the passage of benzene;hence,the by-product ethylbenzene exhibits a higher selectivity.The distance between the active centers of the bifunctional catalysts was the main factor affecting the catalytic performance,and the powder mixing method was more conducive to the conversion of syngas and benzene.展开更多
基金National Natural Science Foundation of China(21872101,21962014)Science and Technology Program of Zungeer County,Inner Mongolia(2020YY-12)。
文摘Selective synthesis of ethanol from syngas under the Co-based catalysts is still challenging due to the hard of regulating the active site Co^(0) and Co^(2+)ratio.In this work,a series of CaTi_(0.9-x)Co_(x)Mo_(0.1)O_(3)(x=0,0.1-0.4)and CaTi_(0.7)Co_(0.3)O_(3) catalysts were prepared by using citric acid complexation method to promote the synthesis of ethanol.It was found that Mo species in the perovskite lattice can regulate the Co^(0) and Co^(2+)ratio through the domain-limiting effect of perovskite and the degree of Co reduction could be adjusted by changing the Co/Mo molar ratio.Among these investigated catalysts,the total selectivity of alcohols over the catalyst with the optimal Co/Mo ratio CaTi_(0.6)Co_(0.3)Mo_(0.1)O_(3) reached 39.1%,with ethanol accounting for 74.7%,which was ascribed to the moderate and tightly bound ratio of dissociative to non-dissociative adsorption sites on the surface and the balance of CH_(x)-CH_(y) coupling and C^(O) insertion.
基金supported financially by the National Natural Science Foundation of China(51776206)the Local Innovative and Research Teams Project of Guangdong Pearl River Talents Program(2017BT01N092)+4 种基金the National Key R&D Program of China(2018YFB1501504)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX20_0095)the Fundamental Research Funds for the Central Universities(3203002104D)the Research Foundation-Flanders(FWO,grant 12E8617N)for funding and KU Leuven grant C14/20/086visiting scholar(2017-20202)at the Guangzhou Institute of Energy Conversion,Chinese Academy of Sciences。
文摘Direct conversion of syngas to aromatics has great potential to decrease fossil fuel dependence.Here,a unique structured hybrid catalyst composed of Fe_(3)O_(4) nanoparticles intimately dispersed inside an acidic zeolite is developed.1 to 4 nm sized Fe_(3)O_(4) nanoparticles end up evenly dispersed in an acidic and slightly mesoporous Al-ZSM-5 based on Fe_(3)O_(4) restructuring during co-hydro thermal synthesis using organosilane modification.A very high aromatic productivity of 214 mmolaromatics h^(-1) gFe^(-1) can be obtained with a remarkable 62%aromatic selectivity in hydrocarbons.This catalyst has excellent sintering resistance ability and maintains stable aromatics production over 570 h.The synthetic insights that postulate a mechanism for the metastable oxide-zeolite reorganization during hydrothermal synthesis could serve as a generic route to sinter-resistant oxide-zeolite composite materials with uniform,well-dispersed oxide nanoparticles in close intimacy with-and partially confined in-a zeolite matrix.
基金financially supported by Key Projects of National Natural Science Foundation of China(No.21736007)National Natural Science Foundation of China(Nos.22078221,21776193,21476155)Top Young Innovative Talents of Shanxi。
文摘In the conversion process of syngas-to-C_(2)species,the OH species are inevitably produced accompanying the production of key intermediates CH_(x)(x=1-3),traditionally,the function of surface OH species is generally accepted as the hydrogenating reactive species.This work for the first time proposed and confirmed the assisted catalytic mechanism of surface OH species that performed as the promoter for syngas-to-C_(2)species on Cu-based catalysts.DFT and microkinetic modeling results reveal that the produced OH species accompanying the intermediates CH_(x)production on the MCu(M=Co,Fe,Rh)catalysts can stably exist to form OH/MCu catalysts,on which the presence of surface OH species as the promoter not only presented better activity and selectivity toward CH_(x)(x=1-3)compared to MCu catalysts,but also significantly suppressed CH_(3)OH production,providing enough CH_(x)sources to favor the production of C_(2)hydrocarbons and oxygenates.Correspondingly,the electronic properties analysis revealed the essential relationship between the electronic feature of OH/MCu catalysts and catalytic performance,attributing to the unique electronic micro-environment of the catalysts under the interaction of surface OH species.This new mechanism is called as OH-assisted catalytic mechanism,which may be applied in the reaction systems related to the generation of OH species.
基金financial support from the National Natural Science Foundation of China(Grant No.21978285,21991093,21991090)the“Transformational Technologies for Clean Energy and Demonstration”,Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDA21030100)。
文摘Direct conversion of syngas to aromatics(STA)over oxide-zeolite composite catalysts is promising as an alternative method for aromatics production.However,the structural effect of the oxide component in composite catalysts is still ambiguous.Herein,we investigate the size effect by selecting ZnCr_(2)O_(4)spinel,as a probe oxide,mixing with H-ZSM-5 zeolite as a composite catalyst for STA reaction.The CO conversion,aromatics selectivity and space-time yield(STY)of aromatics are all significantly improved with the crystal size of ZnCr_(2)O_(4)oxide decreases,which can mainly attribute to the higher oxygen vacancy concentration and thus the rapid generation of more C1oxygenated intermediate species.Based on the understanding of the size-performance relationship,ZnCr_(2)O_(4)-400 with a smaller size mixing with H-ZSM-5 can achieve32.6%CO conversion with 76%aromatics selectivity.The STY of aromatics reaches as high as 4.79 mmol g_(cat)^(-1)h^(-1),which outperforms the previously reported some typical catalysts.This study elucidates the importance of regulating the size of oxide to design more efficient oxidezeolite composite catalysts for conversion of syngas to value-added chemicals.
基金supported by the Ministry of Science and Technology of China (No.2017YFB0602201)the Chinese Academy of Sciences (XDA21020400)+2 种基金the National Natural Science Foundation of China (Grant nos.91645204, 21425312 and 21621063)the Youth Innovation Promotion Association of Chinese Academy of Sciences (2019184)the INCOE (International Network of Centers of Excellence) project coordinated by BASF SE
文摘Oxide-Zeolite(OX-ZEO) bifunctional catalyst design concept has been exemplified in several processes to direct conversion syngas to value-added chemicals and fuels such as mixed light olefins, ethylene, aromatics and gasoline.Herein we demonstrate that the product can be steered toward liquefied petroleum gas(LPG) with a selectivity up to 89% in hydrocarbons especially propane selectivity reaching 80% at CO conversion of 63% using ZnCrOx-H-SSZ-39 catalyst.Interestingly, the quantity of the acid sites of SSZ-39 does not influence obviously the hydrocarbon distribution but the strength is crucial for selective formation of propane.This finding provides an alternative route of LPG synthesis from a variety of carbon resources via syngas.
基金The work has been supported by the National High Technology Research and Development Program 863 of China(2011AA050106)the Fundamental Research Funds for the Central Universities(2012YH01).
文摘This research focused on the feasibility of applying the forward and reverse combustion approach to the in situ gasification of lignite with the production of hydrogen-rich syngas(H_(2)and CO).The so-called forward combustion gasification(FCG)and reverse combustion gasification(RCG)approach in which oxygen and steam are simultaneously fed to the simulated system of underground coal gasification(UCG)was studied.A simulated system of UCG was designed and established.The underground conditions of the coal seam and strata were simulated in the system.The combustion gasification of lignite has been carried out experimentally for almost 6.5 days.The average effective content(H_(2)+CO)of syngas during the FCG phase was 62.31%and the maximum content was 70.92%.For the RCG phase the corresponding figures are 61.33%and 67.91%.Thus,the feasibility of using RCG way for UCG has been demonstrated.The temperature profiles have been provided by using of 85 thermocouples during the model experiment,which portrayed the several nephograms of thermal data in the gasifier were of significance for the prospective gasification processes.
文摘In this work,syngas methanation over Ni-W/TiO2-SiO2catalyst was studied in a fluidized-bed reactor(FBR)and its performance was compared with a fixed-bed reactor(FIXBR).The effects of main operating variables including feedstock gases space velocity,coke content,bed temperature and sulfur-tolerant stability of 100 h life were investigated.The structure of the catalysts was characterized by XRD,N2adsorptiondesorption and TEM.It is found that under same space velocity from 5000 h 1to 25000 h 1FBR gave a higher CH4yield,lower coke content,and lower bed temperature than those obtained in FIXBR.Ni-W/TiO2-SiO2catalyst possessed excellent sulfur-tolerant stability on the feedstock gases less than 500 ppm H2S in FBR.The carbon deposits formed on the spent catalyst were in the form of carbon fibers in FBR,while in the form of dense accumulation distribution appearance in FIXBR.
文摘A series of Cu-based catalysts were developed for alkylation of benzene with syngas. The catalyst samples were prepared by the impregnation method, and were characterized by XRD, XRF, NH3-TPD, and TEM and evaluated in a fixed bed reactor. The optimized reaction temperature of Cu/Al2O3/ZSM-5 catalyst was 350 ℃, while higher contents of copper were conducive to alkylation of benzene with syngas. The new medium strength acid centers in the catalyst created by Cu were beneficial to alkylation. Hydrogenation reaction of CO was executed on the metal centers without dissociation, Dimethyl ether(DME) was the major intermediate over Cu-based catalysts. Higher selectivity of methylation and lower selectivity of heavy aromatics were confirmed after the second metal(Zn, Mn, or V) was added to the copper catalyst. Cu was partly covered by Zn in the Cu-Zn/Al2O3/ZSM-5 catalyst leading to low dispersion and low activity of copper. Cu-Mn/Al2O3/ZSM-5 catalyst possessed the best yield of methylation product. Cu-Mn composite oxides were probably formed in fresh catalyst, which blocked the sintering of Cu in the reaction process. The loading of Cu decreased dramatically after the introduction of V, while causing an increase of the amount of medium strength acid centers at the same time. V prevented the sintering of copper particles during the reducing process and had a promoting effect on the activity of Cu.
基金supported by the National Natural Science Foundation of China(21673214,U1732272)
文摘The nanosheets structured K–Co–MoS_2 catalyst was prepared through a one-step hydrothermal synthesis combined with the wetness impregnation. The fresh catalyst has a high dispersion of Co–Mo–S active phase and no Co_9S_8 is found. The pure H_2 activated catalyst shows a higher intrinsic activity, especially the C_(2+) OH selectivity for the higher alcohol synthesis compared to the one activated by 5% H_2/N_2 atmosphere. The reason is attributed to that the pure H_2 activation more effectively suppresses the formation of Co_9S_8 and stabilizes the Co–Mo–S active phase during the reaction due to the formation of SH species.
基金supported by the Fundamental Research Funds for the Central Universities(XK1802-6,XK1902,XK1803-05,12060093063,2312018RC07)the National Natural Science Foundation of China(U1707603,21878008,21625101,20190816)。
文摘Photocatalytic reduction of CO2 with H2 O to syngas is an effective way for producing high value-added chemical feedstocks such as methanol and light olefins in industry.Nevertheless,the precise control of CO/H2 ratio from photocatalytic CO2 reduction reaction still poses a great challenge for the further application.Herein,we prepared a series of highly efficient heterostructure based on highly dispersed palladium supported on ultrathin Co Al-layered double hydroxide(LDH).In conjunction with a Ru-complex sensitizer,the molar ratios of CO/H2 can be tuned from 1:0.74 to 1:3 under visible-light irradiation(λ>400 nm).More interestingly,the syngas can be obtained under light irradiation atλ>600 nm.Structure characterization and density functional theory calculations revealed that the remarkable catalytic activity can be due to the supported palladium,which improved the charge transfer efficiency.Meanwhile,more H atoms were used to generate H2 on the supported palladium for further tunable CO/H2 ratio.This work demonstrates a new strategy for harnessing abundant solar-energy to produce syngas from a CO2 feedstock.
基金the National Natural Science Foundation of China (50574046)National Natural Science Foundationof Major Research Projects (90610035)High School Doctoral Subject Special Science and Research Foundation of Ministry of Education (20040674005)
文摘CexZr1-xO2 mixed oxides with different Ce/Zr ratios were prepared by coprecipitation. The characterizations of mixed oxides were studied by X-ray diffraction (XRD) and H2-TPR. And the performances were tested in a fixed-bed quartz reactor. The results indicated that lattice oxygen of CexZr1-xO2 could oxidate methane to syngas and the incorporation of zirconium into the ceria lattice could improve the O2- mobility. The Ce0.7Zr0.3O2 had the best activity in investigative temperature ranging from 600 to 900 ℃. Effects of reaction time on H2/CO ratio were studied at 850 ℃ when using Ce0.7Zr0.3O2 as catalyst. The results indicated that the ratio was closed to 2 values in the first 10 min, however, it rapidly increased with reaction time after >10 min. The possible reason was that the direct partial oxidation of methane reaction was dominant in the first 10 min. However, the methane pyrogenation was responsible for the rapid increase of H2/CO ratio after 10 min. Thus, if syngas with H2/CO ratio of 2 wanted to be obtained, the reaction time needed to be controlled.
基金the National Natural Science Foundation of China(Nos.U1707603,21878008,21625101,and U1507102,21922801)the Beijing Natural Science Foundation(Nos.2182047 and 2202036)the Fundamental Research Funds for the Central Universities(Nos.XK1802-6,XK1902,12060093063,and 2312018RC07).
文摘Visible-light-driven CO2 photoreduction to achieve renewable materials,such as syngas,hydrocarbons,and alcohols,is a key process that could relieve environmental problems and the energy crisis simultaneously.Reduction of syngas products with diff erent H2:CO proportions is highly expected to produce high value-added chemicals in the industry.However,the development of technologies employing long-wavelength irradiation to achieve CO2 photoreduction and simultaneous tuning of the resultant H2:CO proportion remains a challenging endeavor.In this work,we carried out interfacial engineering by designing a series of heterostructured layered double-hydroxide/MoS2 nanocomposites via electrostatic self-assembly.The syngas proportion(H 2:CO)obtained from CO2 photoreduction could be modulated from 1:1 to 9:1 by visible-light irradiation(λ>400 nm)under the control of the interface-rich heterostructures.This work provides a cost-eff ective strategy for solar-tofuel conversion in an artificial photosynthetic system and describes a novel route to produce syngas with targeted proportions.
基金supported by the National Natural Science Foundation of China(No.51,451,002,No.21,371,129)Shanxi Province Science Foundation for Youths(2,013,021,008-3)the joint funds of the National Natural Science Foundation of China–China Petroleum and Chemical Corporation(the state key program grant No.U1463209)
文摘Ordered mesoporous copper incorporated Al_2O_3(Cu/Al_2O_3) with high Cu dispersion were prepared by a facile solution combustion synthesis method using aluminum nitrate and copper nitrate as oxidants and urea as fuel. It is a facile and green route to synthesize catalysts for dimethyl ether directly from syngas. Cu/Al_2O_3 catalysts were characterized by XRD, N_2 adsorption–desorption, SEM-EDS, and H_2-TPR.The results indicate that the catalysts obtain an ordered mesoporous structure and copper is homogenously dispersed. The mesoporous Cu/Al_2O_3 catalysts were utilized as bifunctional catalysts in syngas to dimethyl ether reaction(STD). The copper content affects the catalytic performance in STD reaction. The CO conversion and DME selectivity of Cu/Al_2O_3 with 15% copper molar ratio achieve 52.9% and 66.1%,respectively. Moreover, the mesoporous Cu/Al_2O_3 catalysts show excellent stability in STD reaction.
基金This work was supported by National Natural Science Foundation of China(Grants No.12025505)China Ministry of Science and Technology(2017YFA0208300)+2 种基金Youth Innovation Promotion Association CAS(CX2310007007 and CX2310000091)Open Fund Project of State Key Laboratory of Environmentally Friendly Energy Materials(20kfhg08)We would thank NSRL and SSRF for the synchrotron beam time.The calculations were performed on the supercomputing system in the Supercomputing Center of University of Science and Technology of China.
文摘Surface chemistry modification represents a promising strategy to tailor the adsorption and activation of reaction intermediates for enhancing activity.Herein,we designed a surface oxygen-injection strategy to tune the electronic structure of SnS_(2) nanosheets,which showed effectively enhanced electrocatalytic activity and selectivity of CO_(2) reduction to formate and syngas(CO and H_(2)).The oxygen-injection SnS_(2) nanosheets exhibit a remarkable Faradaic efficiency of 91.6%for carbonaceous products with a current density of 24.1 mA cm^(−2) at−0.9 V vs RHE,including 83.2%for formate production and 16.5%for syngas with the CO/H_(2) ratio of 1:1.By operando X-ray absorption spectroscopy,we unravel the in situ surface oxygen doping into the matrix during reaction,thereby optimizing the Sn local electronic states.Operando synchrotron radiation infrared spectroscopy along with theoretical calculations further reveals that the surface oxygen doping facilitated the CO_(2) activation and enhanced the affinity for HCOO*species.This result demonstrates the potential strategy of surface oxygen injection for the rational design of advanced catalysts for CO_(2) electroreduction.
基金the financial support from the National Natural Science Foundation of China(Grant No.21978285,21991093,21991090),the‘‘Transformational Technologies for Clean Energy and Demonstration”the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDA21030100)。
文摘Realizing high CO conversion and high aromatics selectivity simultaneously in syngas-to-aromatics(STA)reaction is still challenging.Herein,we report a 57.5%CO conversion along with 74%aromatics selectivity over a composite catalyst consisting of Fe/ZnCr_(2)O_(4)(Fe modified ZnCr_(2)O_(4)spinel)oxide and H-ZSM-5 zeolite.Impregnation of only 3 wt%of Fe onto ZnCr_(2)O_(4)can remarkably increase CO conversion without sacrificing the aromatics selectivity.Oxygen vacancy concentration is improved after impregnating Fe.The highly dispersed iron carbide species is formed during the reaction over Fe/ZnCr_(2)O_(4)spinel oxide.The synergistic effect of oxygen vacancy and iron carbide results in a rapid formation of abundant oxygenated intermediate species,which can be continuously transformed to aromatics in H-ZSM-5.This study provides a new insight into the design of highly efficient catalyst for syngas conversion.
文摘Highly active and selective Ni-based catalysts for partial oxidation of methane (POM) to syngas (CO/H,) have been studied and developed. Spectroscopic characterization by XRD, XPS, EPR, etc. demonstrated that under the POM reaction conditions, the Ni-components of the catalysts investigated were reduced and enriched on the surface to form metallic Ni0-phase. A comparative study of the first series of transition-metals showed that only Ni and Co have a high POM activity and selectivity, whereas the others (including Mn, Fe, Cu, etc. ) give mainly complete combustion products, Co, and H2O. The results favor the following viewpoints: the PoM activity is related with the rapidly changeable valence transitionmetal sites, M0/M2+ (e. g. Ni0/Ni2+ ), on the surface of the functioning catalysts;the transition-metal sites in zero-valence state seem to be responsible for the activation and dehydrogenation of methane by homolytic splitting of its C-H bonds on these sites. and the nature of rapidly changeable valence of the active sties is requisite for activation and rapid conversion of dioxygen.
基金Supported by the National Natural Science Foundation of China(21673187,21336009,21576228)National Key Technology Support Program of China(2014BAC10B01).
文摘In this paper, Ni/Zr–Yb–O catalysts with different sodium contents are prepared by a co-precipitation method, using aqueous Na2CO3 solution as a precipitant, and the effect of sodium on the catalyst structure and catalytic performance for syngas methanation is extensively investigated using five Ni/Zr–Yb–O catalysts, containing 0, 0.5, 1.5,4.5 and 13.5 wt% Na^+, those are denoted as Cat-1, Cat-2, Cat-3, Cat-4 and Cat-5 respectively. It is found that the interaction between Ni and support determines the catalytic performance of Ni/Zr–Yb–O and the residual sodium content negatively affects the interaction between Ni and support. Cat-1 exhibits an excellent catalytic performance.During a long run time of 380 h, no deactivation is observed and both CO conversion and CH4 selectivity maintain a level above 90%. However, Cat-3 and Cat-5 suffer rapid deactivation under the same reaction condition. The characterization results indicate the strong interaction between Ni and support enables Cat-1 to possess well dispersed Ni species, resistance to sintering and carbon deposition and thus the excellent catalytic performance. However, the presence of sodium ions over Ni/Zr–Yb–O degrades the interaction between Ni and support and the catalytic performance, especially for the stability. The relative weak interaction between Ni and support results in severe sintering of both ZrO2 and Ni under the reaction condition, carbon deposition and the poor catalytic performance.
基金The King Mongkut’s Institute of Technology Ladkrabang(KMITL),Thailandthe Franco-Thai scholarship program。
文摘The chemical looping reforming of methane through the nonstoichiometric ceria redox cycle(CeO2/CeO2-δ) has been experimentally investigated in a directly irradiated solar reactor to convert both solar energy and methane to syngas in the temperature range 900–1050 °C. Experiments were carried out with different ceria shapes via two-step redox cycling composed of endothermic partial reduction of ceria with methane and complete exothermic re-oxidation of reduced ceria with H2 O/CO2 at the same operating temperature, thereby demonstrating the capability to operate the cycle isothermally. A parametric study considering different ceria macrostructure variants(ceria packed powder, ceria packed powder mixed with inert Al2 O3 particles, and ceria reticulated porous foam) and operating parameters(methane flow-rate, reduction temperature, or sintering temperature) was conducted in order to unravel their impact on the bed-averaged oxygen non-stoichiometry(δ), syngas yield, methane conversion, and solar reactor performance. The ceria cycling stability was also experimentally investigated to demonstrate repeatable syngas production by alternating the flow between CH4 and H2 O(or CO2). A decrease in sintering temperature of the ceria foam was beneficial for increasing syngas selectivity, methane conversion,and reactor performance. Increasing both CH4 concentration and reduction temperature enhanced δ with the maximum value up to 0.41 but concomitantly favored CH4 cracking reaction. The ceria reticulated porous foam showed better performance in terms of effective heat transfer, due to volumetric absorption of concentrated solar radiation and uniform heating with lower solar power consumption, thereby promoting the solar-to-fuel energy conversion efficiency that reached up to 5.60%. The energy upgrade factor achieved during cycle was up to 1.19. Stable patterns in the δ and syngas yield for consecutive cycles with the ceria foam validated material performance stability.
基金financial support from the National Key Research&Development Program of China(2018YFB0604901)the National Natural Science Foundation of China(21706210)the Key Research&Development Program of Shaanxi Province(2020ZDLGY11-06)。
文摘A series of ZnO-ZrO_(2) solid solutions with different Zn contents were synthesized by the urea coprecipitation method,which were coupled with H-ZSM-5 zeolite to form bifunctional catalysts.As a new benzene alkylation reagent,syngas was used instead of methanol to realize the efficient conversion of syngas and benzene into toluene and xylene.A suitable ratio of ZnO-ZrO_(2) led to the significant improvement in the catalytic performance,and a suitable amount of acid helped to increase the selectivity of toluene/xylene and reduce the selectivity of the by-products ethylbenzene and C^(9+) aromatics.The highest benzene conversion of 89.2%and toluene/xylene selectivity of 88.7%were achieved over 10%ZnO-ZrO_(2)&H-ZSM-5(Si/Al=23)at a pressure of 3 MPa and a temperature of 450℃.In addition,the effect of the zeolite framework structure on product distribution was examined.Similar to the molecular dynamics of aromatic hydrocarbons,H-ZSM-5 zeolites comprise 10-membered-ring pores,which are beneficial to the activation of benzene;hence,the conversion of benzene is higher.H-ZSM-35 and HMOR zeolites exhibited small eight-membered-ring channels,which were not conducive to the passage of benzene;hence,the by-product ethylbenzene exhibits a higher selectivity.The distance between the active centers of the bifunctional catalysts was the main factor affecting the catalytic performance,and the powder mixing method was more conducive to the conversion of syngas and benzene.