UNIFORM ANALYTIC CONSTRUCTION OF WAVELET ANALYSIS FILTERS BASED ON SINE AND COSINE TRIGONOMETRIC FUNCTIONS

Based on sine and cosine functions, the compactly supported orthogonal wavelet filter coefficients with arbitrary length are constructed for the first time. When N = 2(k-1) and N = 2k, the unified analytic constructions of orthogonal wavelet filters are put forward, respectively. The famous Daubechies filter and some other well-known wavelet filters are tested by the proposed novel method which is very useful for wavelet theory research and many application areas such as pattern recognition.

Relationship between Multi-Output Partially Bent Functions and Multi-Output Bent Functions

In this paper, the definition of multl-output partially Bent functions is presented and some properties are discussed. Then the relationship between multi-output partially Bent functions and multi-output Bent functions is given in Theorem 4, which includes Walsh spectrum expression and function expression. This shows that multi-output partially Bent functions and multi-output Bent functions can define each other in principle. So we obtain the general method to construct multi-output partially Bent functions from multi-output Bent functions.

Creep testing and viscous behavior research on carbon constructional quality steel under high temperature

Creep tests under at a certain temperature and different stress levels were performed on two carbon constructional quality steels at a certain stress level and different temperatures,and their creep curves at high temperature were obtained based on analyzing the testing data.Taking 45 steel at a certain temperature and stress as the example,the integral creep constitutive equation and the differential stress-strain constitutive relationship were established based on the relevant rheological model,and the integral core function was also obtained.Simultaneously,the viscous coefficients denoting the viscous behavior in visco-plastic constitutive equation were determined by taking use of the creep testing data.Then the viscous coefficients of three carbon steels(20 steel,35 steel and 45 steel) were compared and analyzed.The results show that the viscosity is different due to different materials at the same temperature and stress.

Analysis on Discipline Construction and Development Strategy of National-level Professional Research Institutes

Discipline construction is development core of a professional research institute. The paper describes function,guiding ideology,and construction of discipline construction,based on giving a national-level professional research institute directly under the Ministry of Science and Technology,as an example. Furthermore,according to current situation of discipline construction in a professional research institute,the paper discusses development ideas of discipline construction. The final goal of the paper is to provide basis and reference for reinforcing discipline construction of professional research institutes.

Recommendations for Construction and Management of Ecological Public Welfare Forest in Hainan Province

This paper firstly evaluated ecological service functions of ecological public welfare forest in Hainan Province. Then,it introduced value structure and existing problems of ecological service functions. Focusing on optimization and adjustment of scale and distribution of ecological public welfare forest,it came up with recommendations for construction and management of ecological public welfare forest in Hainan Province.

A constructive method for approximating trigonometric functions and their integrals

This paper presents an interpolation-based method(IBM)for approximating some trigonometric functions or their integrals as well.It provides two-sided bounds for each function,which also achieves much better approximation effects than those of prevailing methods.In principle,the IBM can be applied for bounding more bounded smooth functions and their integrals as well,and its applications include approximating the integral of sin(x)/x function and improving the famous square root inequalities.

Construction and Management of Public Welfare Forest in Hainan Province

Through investigating ecological service functions of public welfare forest in Hainan Province, this paper explored type constitution and problems of its ecological service functional value, optimization of its scale and layout, promoted effective protection and benign development, and proposed strategies for the construction and management of public welfare forest in Hainan Province.

Path of Rural Vitalization Based on Coupling Perspective of Township Construction and Resource Environment in Jiangsu Province,China

Recently,the field of rural vitalization has received extensive research attention.However,only few studies have proposed an approach to rural vitalization from the coupling perspective of township construction and the resource environment.Taking Jiangsu Province of China as the study area,we constructed index systems of township construction function types and resource environments.Based on 875 township study units in Jiangsu,we characterized the township construction function type and resource environment and analyzed the dynamic process of their coupling from 2005 to 2017.The results are as follows:1)the townships of planting and breeding types in Jiangsu were mainly distributed in northern and central Jiangsu;the townships of business travel,industry,and integrated types were mainly distributed in southern Jiangsu;and the townships of ecological type were irregularly distributed throughout Jiangsu.2)Resource environment factors and township construction function types in Jiangsu clustered based on their location with some overlap.3)Spatial variability in the degree of coupling level between township construction and the resource environment in Jiangsu was not apparent,and low coupling levels accounted for most of the study units.The sum of the number of medium and high coupling townships in southern,central,and northern Jiangsu was roughly equal,and the coupling level between township construction and the resource environment in southern Jiangsu evolved remained unchanged,whereas that in the central and northern Jiangsu became imbalanced.4)In Jiangsu,township construction was mainly constrained by water resources,and the constraint parameters gradually increase.Large variability in resource environment constraint was observed in northern,central,and southern Jiangsu for different township construction function types.Based on these findings,we proposed the implementation of targeted rural vitalization strategies.

Comparing the Functionality between Virtual Reality and Mixed Reality for Architecture and Construction Uses

Virtual Reality (VR) and Mixed Reality (MR) offer unique opportunities for the architecture and construction industry through different approaches with building information modeling (BIM). While VR offers architecture and construction practitioners the ability to personally experience the built environment in an immersive, MR with its unique ability of overlaying digital information in the real world allows practitioners to perform on-site visualization for construction planning and as-built verification. With their similar but distinct characteristics, VR and MR offer a variety of functionality to the architecture and construction industry that often confuses practitioners on what to choose to best fit their needs. To clarify this confusion, this paper investigates the available technologies of VR and MR in terms of both hardware and software and compares the functionality between the two for architecture and construction uses. While VR hardware has been developed into three categories based on their connection types and tracking methods, MR hardware has mainly focused on standalone devices. Eight VR software and nine MR software have been identified, investigated, and compared. This paper provides the latest information for architecture and construction practitioners on how VR and MR hardware and software work similarly and differently.

Construction of <i>k</i>-Variate Survival Functions with Emphasis on the Case <i>k</i>= 3

The purpose of this paper is to present a general universal formula for k-variate survival functions for arbitrary k = 2, 3, ..., given all the univariate marginal survival functions. This universal form of k-variate probability distributions was obtained by means of “dependence functions” named “joiners” in the text. These joiners determine all the involved stochastic dependencies between the underlying random variables. However, in order that the presented formula (the form) represents a legitimate survival function, some necessary and sufficient conditions for the joiners had to be found. Basically, finding those conditions is the main task of this paper. This task was successfully performed for the case k = 2 and the main results for the case k = 3 were formulated as Theorem 1 and Theorem 2 in Section 4. Nevertheless, the hypothetical conditions valid for the general k ≥ 4 case were also formulated in Section 3 as the (very convincing) Hypothesis. As for the sufficient conditions for both the k = 3 and k ≥ 4 cases, the full generality was not achieved since two restrictions were imposed. Firstly, we limited ourselves to the, defined in the text, “continuous cases” (when the corresponding joint density exists and is continuous), and secondly we consider positive stochastic dependencies only. Nevertheless, the class of the k-variate distributions which can be constructed is very wide. The presented method of construction by means of joiners can be considered competitive to the copula methodology. As it is suggested in the paper the possibility of building a common theory of both copulae and joiners is quite possible, and the joiners may play the role of tools within the theory of copulae, and vice versa copulae may, for example, be used for finding proper joiners. Another independent feature of the joiners methodology is the possibility of constructing many new stochastic processes including stationary and Markovian.

Research on the Separable and Combinable Object NP Construction

There is a separable and combinable object NP construction in modern Chinese.The modifier or the central part of it can be moved forward to the beginning as the topic.The combined construction delivers the objective expression,while the separated construction implies the subjective understanding.The transformation is driven by pragmatic factors.Firstly,the article discusses the combined and the separated constructions meanings.Secondly,the article analyzes the form differences which are caused by their meanings.At last,the article discusses the discourse function variation caused by the form transformation and introduces the objective and subjective differences of human natural language expression.

The Structure of Classifier Constructions and Some Related Theoretical Issues

Some questions regarding the analysis of classifiers and classifier constructions are raised in this paper.The classifier,as a mere adjunct adjoining to the head,cannot serve as the head of the noun phrase containing it,and as a result,it cannot project as ClP or nP.Under this approach,the DP analysis and the classifier construction theory are further refined.The constituents which precede and follow the classifier are analyzed in terms of their syntactic functions,semantic relations,linear features,feature assignment and syntactic occurrence in order to represent the classifier construction with the X-bar phrase structure theory appropriately and correctly and present a universal approach to classifier constructions in various languages.

Reshaping the New Paradigm of Classroom Culture Construction in Colleges and Universities

The classroom is an important place for“three guarantees”education.Classroom culture refers to a group culture with both teachers and students as the main body,the classroom space as the carrier,and spiritual connotation as the core.The creation of classroom culture with school characteristics,characteristics of the times,and Chinese characteristics can reflect the aesthetic perspective and value orientation of the school,which has far-reaching significance for the growth of students and their future development.This paper takes the construction of classroom culture in colleges and universities as the research subject,obtains real data,and conducts variable analysis through questionnaire survey and structured interview,with the aim of enriching the educational function of the classroom.It involves how the classroom culture pays attention to the current life,needs,and desires of college and university students,along with the problems and functions that should be improved in the traditional construction.This paper also discusses and reshapes the new paradigm of classroom culture construction in colleges and universities based on the combination of student growth,subject areas,school culture,and advanced technology.

Information System Construction and Function Module Design Based on Reverse Logistics

Reverse logistics are playing more and more important role with the development of competition and the social responsibility of enterprises.It could be divided into commission acceptance,recycling and returned goods handling.Reverse logistics information system consists of the database establishment,network structure and logic structure design.The collection,storage,processing,transmission and output functions of the reverse logistics information system were discussed in the thesis.Eventually,it established seven modules for the reverse logistics information system including the system management module,oriented module,returning goods processing module,reverse transportation management module,information sharing module,statistical analysis module and cost control module.

安氏Ⅱ类错[牙合]畸形佩戴Twin-block矫治器时上颌骨的应力分布

背景:Twin-block矫治器常用于安氏Ⅱ类错[牙合]畸形的矫治,其刺激下颌骨生长的作用机制已得到许多研究证实,但对上颌骨生长的影响尚不清楚。目的:通过有限元法分析安氏Ⅱ类错[牙合]畸形患者佩戴Twin-block矫治器时上颌骨复合体、周围骨缝及上颌牙列的应力分布。方法:选择在山东省康复大学青岛医院/青岛市市立医院口腔正畸科进行正畸治疗的安氏Ⅱ类错[牙合]畸形患者1例,测量患者佩戴Twin-block矫治器时的咬合力数据,采集其锥形束CT数据,建立包含上颌骨复合体、周边各骨缝、Twin-block矫治器及上颌牙列在内的有限元模型,通过ABAQUS软件模拟患者戴入Twin-block时上颌骨、骨缝及上颌牙列的应力分布与位移。结果与结论:①上颌前牙受到的等效应力明显小于后牙,两侧牙齿的最大等效应力分别为4.7975 MPa和8.7161 MPa,均位于第一前磨牙处;最大位移呈现在两侧上颌切牙处,分别为0.0805 mm和0.0810 mm;②骨缝的最大等效应力为1.284 MPa,主要集中在两侧翼腭缝及额颌缝,其余骨缝受力情况几乎无差异;骨缝的最大位移为0.07 mm,其中翼腭缝的位移量最大,其次是额颌缝;③上颌骨复合体受到的最大等效应力为27.18 MPa,主要集中在上颌骨前面梨状孔两侧、鼻额缝周边及颚骨后部翼腭缝附近;上颌骨的最大位移值为0.07 mm,主要集中于上颌牙槽骨;④结果显示,咬合力通过Twin-block矫治器作用于上颌骨复合体,导致上颌骨顺时针旋转、牙合平面变陡,应采取相应措施补偿这种趋势,例如建牙合过程中考虑上颌磨牙伸长、下颌磨牙压低,不仅能够将牙合平面整平,同时有利于下颌前伸,这将进一步提高Ⅱ类错[牙合]正畸治疗效果。

一类Hua Construction的Bergman核函数

给出了一类Hua constructin的Bergman核函数及其全纯自同构群.

Advances in 3D printing scaffolds for peripheral nerve and spinal cord injury repair

Because of the complex nerve anatomy and limited regeneration ability of natural tissue,the current treatment effect for long-distance peripheral nerve regeneration and spinal cord injury(SCI)repair is not satisfactory.As an alternative method,tissue engineering is a promising method to regenerate peripheral nerve and spinal cord,and can provide structures and functions similar to natural tissues through scaffold materials and seed cells.Recently,the rapid development of 3D printing technology enables researchers to create novel 3D constructs with sophisticated structures and diverse functions to achieve high bionics of structures and functions.In this review,we first outlined the anatomy of peripheral nerve and spinal cord,as well as the current treatment strategies for the peripheral nerve injury and SCI in clinical.After that,the design considerations of peripheral nerve and spinal cord tissue engineering were discussed,and various 3D printing technologies applicable to neural tissue engineering were elaborated,including inkjet,extrusion-based,stereolithography,projection-based,and emerging printing technologies.Finally,we focused on the application of 3D printing technology in peripheral nerve regeneration and spinal cord repair,as well as the challenges and prospects in this research field.

Construction Theory of Function on Local Fields

We establish the construction theory of function based upon a local field Kp as underlying space. By virture of the concept of pseudo-differential operator, we introduce ＂fractal calculus＂ （or, p-type calculus, or, Gibbs-Butzer calculus）. Then, show the Jackson direct approximation theorems, Bermstein inverse approximation theorems and the equivalent approximation theorems for compact group D（C Kp） and locally compact group Kp^＋-（= Kp）, so that the foundation of construction theory of function on local fields is established. Moreover, the Jackson type, Bernstein type, and equivalent approximation theorems on the HOlder-type space C^σ（Kp）, σ 〉0, are proved; then the equivalent approximation theorem on Sobolev-type space Wr（Kp）, σ≥0, 1≤r 〈∞, is shown.

Development and Prospect of Zoning Mode in the Three Rounds of Overall Land Use Planning of China

Zoning system is the basic mode of establishment of overall land use planning. In this study,the zoning mode and practice in the three rounds of overall land use planning that have been carried out in China were analyzed and summarized firstly,and then some obvious problems existing in the implementation of the zoning mode were analyzed. Finally,countermeasures and suggestions were put forward to provide necessary reference for further development and improvement of the zoning mode and the development of overall land use planning at all levels in China.