Calibration of split Hopkinson pressure bar system with special shape striker

In order to present basic guidance for system calibration of split Hopkinson pressure bar(SHPB) with the special shape striker,wave characteristics and dynamic responses of SHPB under striker impact were analyzed.Stress generated by the special shape striker tends to have a half-sine waveform and has little wave dispersion during its propagation.Impact velocities of the special shape striker and peak values of generated stress still have linear relation but with a different coefficient from that of cylindrical strikers.From stress histories on the surfaces of the input bar impacted by the special shape striker off-axially and obliquely,it is found that the misalignment impacts usually trigger wave distortion and amplitude decrease,which can be used to identify the poor system adjustment.Finally,the system calibration of SHPB with the special shape striker can be classified into four steps:system adjustment,wave distortion identification,measurement calibration and transmission calibration,where the measurement calibration factor and transmission calibration factor are elaborated and redefined.

A Flexible Calibration Method of Laser Light-Sectioning System for Online 3D Measurement

A flexible calibration method based on a front-coated flat mirror is proposed for a laser light-sectioning three-dimensional(3D)measurement system. Since the calibration target and its mirror image are spatially separated and can be recorded in an image by a camera,the proposed method requires only a single composite image that contains a non-planar checkerboard pattern,a laser strip projected on the target and their mirror images to complete the calibration of the camera and the laser plane in one step. Levenberg-Marquardt(LM)algorithm is used to optimize the system parameters,and the measurement accuracy and speed are improved to enable online 3D inspection. Static and dynamic online 3D measurements are carried out on a cup and a triple stepped shaft,respectively,to validate the proposed method. The shaft has two steps with the depth of(0.5±0.01)mm and(2±0.01)mm to be measured online when the shaft is rotated and translated at the same time. The measurement results can be output at a frequency of 7 to 11 readings per second with standard deviations of 0.040 mm and 0.051 mm. The experimental results verify the effectiveness and flexibility of the proposed method.

A Real-Time System for Monitoring Distant Dynamic Displacement of Structures

Based on digital image processing technique, a real-time system is developed to monitor and detect the dynamic displacement of engineering structures. By processing pictures with a self-programmed software, the real-time coordinate of an object in a certain coordinate system can be obtained, and further dynamic displacement data and curve of the object can also be achieved. That is, automatic gathering and real-time processing of data can be carried out by this system simultaneously. For this system, first, an untouched monitoring technique is adopted, which can monitor or detect objects several to hundreds of meters apart; second, it has flexible installation condition and good monitoring precision of sub-millimeter degree; third, it is fit for dynamic, quasi-dynamic and static monitoring of large engineering structures. Through several tests and applications in large bridges, good reliability and dominance of the system is proved.

Data Fusion Method for Manufacturing Measurement

A data fusion method of online multisensors is prop os ed in this paper based on artificial neuron. First, the dynamic data fusion mode l on artificial neuron is built. Then the calibration of data fusion is discusse d with self-adaptive weighing technique. Finally performance of the method is d emonstrated by an online vibration measurement case. The results show that the f used data are more stable, sensitive, accurate, reliable than that of single sen sor data.