Engineering Study on the Treatment of Multi-soil-layering System on the Rural Domestic Wastewater in Taihu Basin

By combining with the actual situation in the rural area,the practical technology of domestic wastewater treatment which had the wide popularization value was developed in the rural area of Taihu Basin.Moreover,the multi-soil-layering system was used to treat the concentrated rural domestic wastewater,and the demonstration project was established in Fenshui Village,Yixing,Jiangsu.The result showed that the infrastructure and operating cost of system was low,and the treatment effect was good.The average removal ratios of COD,NH+4-N,TN,TP and SS were respectively 70%,83%,59%,76% and 94%.The quality of yielding water could reach Grade A standard of Pollutant Emission Standards in Urban Wastewater Treatment Plant.

Cross-Layer Adaptive Resource Allocation Algorithm with Diverse QoS Requirements for Single-Cell OFDMA Systems

The orthogonal frequency division multiple access( OFDMA) based communication system has been considered as the main trend of next-Generation communication system. But the existing resource allocation algorithm designed for such system is always with high complexity thus hard to be realized. To solve such problem with the constraints of spectrum efficiency and buffer state,a novel cross-layer resource allocation algorithm( RAA) is proposed in this paper. The goal of our RAA is to maximize the system throughput while satisfying several practical constraints,such as fairness among services,head of line( Ho L) delay and diverse quality of service( Qo S) requirements. Due to these constraints,finding the optimal solution becomes a NPhard problem. Therefore in this paper a novel method to solve such problem with acceptable complexity is proposed within following steps: firstly,based on the link state we formulate the ideal subchannel allocation strategy as a convex optimization problem,which can be efficiently solved by our proposed lagrange multiplier technique subchannel allocation( LMTSA) algorithm; secondly,according to the obtained channel allocation matrix,a power allocation algorithm based on the water-filling power allocation( WPA) idea is deployed to get the optimal power allocation matrix combining with adaptive modulation and coding( AMC); finally,through a greedy algorithm,the ultimate subchannel and power allocation matrix can be obtained based on iterative method. The simulation results illustrate that we can achieve the higher throughput and better Qo S performance than the widely-used maximum throughput( MT) algorithm and round robin( RR) algorithm.

BOUNDARY LAYER SOLUTION FOR p-SYSTEM WITH ARTIFICIAL VISCOSITY

An initial-boundary values problem in the half space （0, ∞ ） for p-system with artificial viscosity is investigated. It is shown that there exists a boundary layer solution. It is further proved that the boundary layer solution is nonlinear stable with arbitrarily large perturbation. The proof is given by an elementary energy method.

A STUDY ON THE BOUNDARY LAYER FOR THE PLANAR MAGNETOHYDRODYNAMICS SYSTEM

The paper aims to estimate the thickness of the boundary layer for the planar MHD system with vanishing shear viscosity μ. Under some conditions on the initial and boundary data, we show that the thickness is of the order √μ｜lnμ｜. Note that this estimate holds also for the Navier-Stokes system so that it extends the previous works even without the magnetic effect.

Optimal power allocation for a video layered multicasting relay strategy in cellular system

Within a cell of cellular system,cooperative relay technique can improve the performance of multicast efficiently,but it can cause the stream frequent interruptions because of the mobility of relay terminals.A video layered cooperative relay strategy is proposed to guarantee the continuity of multicast stream and retain high-bandwidth of the cooperative relay channel.Based on the capacity analysis for layered relay channel in the strategy,the optimal power allocation is studied to maximize capacity.After analyzing and optimizing the capacity in abstract models,the study is extended to a non-fading and a Gaussian wireless channel model to satisfy the scenario of cellular system.Giving the relay nodes position or distribution of noise power,the obtained results can determine the optimal power allocation among the transmitter and relay nodes.At last,the simulation results show that the strategy and its optimal power allocation have a significant improvement on the performance.

A 4-layer method of developing integrated sensor systems with LabVIEW

System integrity is important for fast and accurate measurement and control.LabVIEW is widely used in education and industry.Many LabVIEW codes are hard to be read and shown because of their 2D topology.In order to simplify the programming,a 4-layer model of developing sensor or measurement systems with LabVIEW is proposed in this paper.The purpose of this paper is to show the readers how to design simple,clear and strong automated systems with LabVIEW.Using a Sensirion SHT75 humidity sensor and an NI USB6008 DAQ board as an example,this paper describes the steps of developing a sensor system from the physical layer to application layer in detail.In layer 2,port selection and signal regulation are demonstrated.In layer 3,timing waveform analysis and synthesis,state diagram analysis,instruction set design,micro operation and fault tolerance designs are demonstrated.In layer 4,data visualization is covered with a vivid example.Programmers found it was hard to show readers their LabVIEW codes because many LabVIEW codes occupy several screens.A layer model simplifies the programming,so one is able to show a medium size LabVIEW code easily.

An Innovative Soft Design Science Methodology for Improving Development of a Secure Information System in Tanzania Using Multi-Layered Approach

This paper presents an innovative Soft Design Science Methodology for improving information systems security using multi-layered security approach. The study applied Soft Design Science Methodology to address the problematic situation on how information systems security can be improved. In addition, Soft Design Science Methodology was compounded with mixed research methodology. This holistic approach helped for research methodology triangulation. The study assessed security requirements and developed a framework for improving information systems security. The study carried out maturity level assessment to determine security status quo in the education sector in Tanzania. The study identified security requirements gap (IT security controls, IT security measures) using ISO/IEC 21827: Systems Security Engineering-Capability Maturity Model (SSE-CMM) with a rating scale of 0 - 5. The results of this study show that maturity level across security domain is 0.44 out of 5. The finding shows that the implementation of IT security controls and security measures for ensuring security goals are lacking or conducted in ad-hoc. Thus, for improving the security of information systems, organisations should implement security controls and security measures in each security domain (multi-layer security). This research provides a framework for enhancing information systems security during capturing, processing, storage and transmission of information. This research has several practical contributions. Firstly, it contributes to the body of knowledge of information systems security by providing a set of security requirements for ensuring information systems security. Secondly, it contributes empirical evidence on how information systems security can be improved. Thirdly, it contributes on the applicability of Soft Design Science Methodology on addressing the problematic situation in information systems security. The research findings can be used by decision makers and lawmakers to improve existing cyber security laws, and enact laws for data privacy and sharing of open data.

Design and Analysis of a New AUV's Sliding Control System Based on Dynamic Boundary Layer

The new AUV driven by multi-vectored thrusters not only has unique kinematic characteristics during the actual cruise but also exists uncertain factors such as hydrodynamic coefficients perturbation and unknown interference of tail fluid, which bring difficult to the stability of the AUV＇s control system. In order to solve the nonlinear term and unmodeled dynamics existing in the new AUV＇s attitude control and the disturbances caused by the external marine environment, a second-order sliding mode controller with double-loop structure that considering the dynamic characteristics of the rudder actuators is designed, which improves the robustness of the system and avoids the control failure caused by the problem that the design theory of the sliding mode controller does not match with the actual application conditions. In order to avoid the loss of the sliding mode caused by the amplitude and rate constraints of the rudder actuator in the new AUV＇s attitude control, the dynamic boundary layer method is used to adjust the sliding boundary layer thickness so as to obtain the best anti-chattering effects. Then the impacts of system parameters, rudder actuator＇s constraints and boundary layer on the sliding mode controller are computed and analyzed to verify the effectiveness and robustness of the sliding mode controller based on dynamic boundary layer. The computational results show that the original divergent second-order sliding mode controller can still effectively implement the AUV＇s attitude control through dynamically adjusting the sliding boundary layer thickness. The dynamic boundary layer method ensures the stability of the system and does not exceed the amplitude constraint of the rudder actuator, which provides a theoretical guidance and technical support for the control system design of the new AUV in real complex sea conditions.

Dependability in Future Battle Network System —Transport Layer Ability to Maintain Quality of Service

Modernization of armies is a constant process and is driven by intuitive fact that those who do not modernize will become extinct. In last five decades, the development of modern armies has taken place around Colonel John Boyd’s theory of OODA loop that deals with information superiority. Building a robust, mobile and capable network that could provide for novel appliances and information superiority is the main challenge which modernizers are facing. Network, suitable for future combat operations, and able to transport a vast amount of information on a battlefield, is expensive to build. Every mistake in design and the need to correct those mistakes could halt development in an army for years. Therefore, system dependability analysis during system design phase is needed. In this report, the concept of a future Battle Network System is described. The Report evaluates operational environment of BNS and possible failure reasons of the service, and illustrates the change in BNS Quality of Service due to probable transport layer errors. This paper describes the method of testing the concept of proposed network systems on the drawing board, and emphasizes design points for a new system. Nevertheless, the proposed method is by no means conclusive. Rather, it describes an engineering approach to define the main problems while creating MANET-based networking systems.

A Resource Allocation Algorithm of Physical-Layer Security for OFDMA System under Non-ideal Condition

In this paper, a resource allocation scheme based on physical layer security under non-ideal condition for OFDMA system is introduced. Firstly, the program uses the information security constructing an OFDMA system Wiretap Channel Model under non-ideal condition. Based on this model, arti?cial noise is generated for secure communications combatting passive multiple eavesdroppers. In order to maximize the average secrecy outage capacity without channel state information of eavesdroppers, we use dual decomposition method to implement subcarriers and power allocation in joint optimization. Simulation results show that the average secrecy outage capacity can achieve 7.81 bit/s/Hz while secrecy outage probability is 0.05 with 50 dB mtransmitpower and 64 sub-carrier for 8 authorized users.

A Reverse Numerical Approach to Determine Elastic-plastic Properties of Multi-layer Material Systems with Flat Cylindrical Indenters

In the present study, the indentation testing with a flat cylindrical indenter on typical multi-layer material systems was simulated successfully by finite element method. The emphasis was put on the methods of extracting the yield stresses and strain-hardening modulus of upper and middle-layers of three-layer material systems from the indentation testing. The slope of the indentation depth to the applied indentation stress curve was found to have a turning point, which can be used to determine the yield stress of the upper-layer. Then, a different method was also presented to determine the yield stress of the middle-layer. This method was based on a set of assumed applied indentation stresses which were to be intersected by the experimental results in order to meet the requirement of having the experimental indentation depth. At last, a reverse numerical algorithm was explored to determine the yield stresses of upper and middle-layers simultaneously by using the indentation testing with two different size indenters. This method assumed two ranges of yield stresses to simulate the indentation behavior. The experimental depth behavior was used to intersect the simulated indentation behavior. And the intersection corresponded to the values of yield stresses of upper and middle-layers. This method was also used further to determine the strain-hardening modulus of upper and middle-layers simultaneously.

Strong coupling between height of gaps and thickness of thermal boundary layer in partitioned convection system

A direct numerical simulation(DNS) method is used to calculate the partitioned convection system with Ra number ranging from 10^7 to 2×10^9.Using the boundary layer thickness to normalize the height of gaps d, we find a strong consistency between the variation of the TD number(the average value of the temperature in each heat transfer channel is averaged after taking the absolute values) with the change of the height of gaps and the variation of the TD number with the change of Ra number in partitioned convection.For a given thickness of partition, heights of gaps are approximately equal to 0.5 or 1 time of the thermal boundary layer thickness λθ at different Ra numbers.TD number representing temperature characteristics is almost the constant value, which means that TD number is a function of d/λθ only.Analysis of local temperature field of area in gaps shows that the temperature distribution in the gaps are basically the same when d/λθ is certain.The heat transfer Nu number of the system at d/λθ≈ 0.5 is larger than that of d/λθ≈ 1, both of them have the same scaling law with Ra number and Nu^Ra^0.25.

Long Term Effects of Farming System on Soil Water Content and Dry Soil Layer in Deep Loess Profile of Loess Tableland in China

Soil water is strongly affected by land use/cover in the Loess Plateau in China. Water stored in thick loessal soils is one of the most important resources regulating vegetation growth. However, soil water in the deep loess proifle, which is critical for maintaining the function of the“soil water pool”is rarely studied because deep proifle soil samples are dififcult to collect. In this study, four experimental plots were established in 2005 to represent different farming systems on the Changwu Tableland：fallow land, fertilized cropland, unfertilized cropland, and continuous alfalfa. The soil water content in the 15-m-deep loess proifles was monitored continuously from 2007 to 2012 with the neutron probe technique. The results showed that temporal variations in soil water proifles differed among the four farming systems. Under fallow land, the soil water content increased gradually over time, ifrst in the surface layers and later in the deep soil layers. In contrast, the soil water content decreased gradually under continuous alfalfa. The distributions of soil water in deep soil layers under both fertilized and unfertilized cropland were relatively stable over time. Thus farming system signiifcantly affected soil water content. Seven years after the start of the experiment, the soil water contents in the 15-m-deep proifles averaged 23.4%under fallow land, 20.3%under fertilized cropland, 21.6%under unfertilized cropland, and 16.0%under continuous alfalfa. Compared to measurements at the start of the experiment, both fallow land and unfertilized cropland increased soil water storage in the 15-m loess proifles. In contrast, continuous alfalfa reduced soil water storage. Fertilized cropland has no signiifcant effect on soil water storage. These results suggest that deep soil water can be replenished under the fallow and unfertilized farming systems. Dry soil layers （i.e., those which have soil water content less than the stable ifeld water capacity） in the subsoil of the Changwu Tableland region can be classiifed as either temporary dry soil layers or persistent dry soil layers. Temporary dry soil layers, which typically form under annual crops, often disappear during wet years. Persistent dry soil layers generally develop under perennial vegetation. Even after removing the vegetation, persistent dry soil layers remain for several decades. This study provides information useful for the conservation and utilization of soil water resources in the Loess Tableland.

Mode-based equivalent multi-degree-of-freedom system for one-dimensional viscoelastic response analysis of layered soil deposit

Discrete models such as the lumped parameter model and the finite element model are widely used in the solution of soil amplification of earthquakes. However, neither of the models will accurately estimate the natural frequencies of soil deposit, nor simulate a damping of frequency independence. This research develops a new discrete model for onedimensional viscoelastic response analysis of layered soil deposit based on the mode equivalence method. The new discrete model is a one-dimensional equivalent multi-degree-of-freedom（MDOF） system characterized by a series of concentrated masses, springs and dashpots with a special configuration. The dynamic response of the equivalent MDOF system is analytically derived and the physical parameters are formulated in terms of modal properties. The equivalent MDOF system is verified through a comparison of amplification functions with the available theoretical solutions. The appropriate number of degrees of freedom（DOFs） in the equivalent MDOF system is estimated. A comparative study of the equivalent MDOF system with the existing discrete models is performed. It is shown that the proposed equivalent MDOF system can exactly present the natural frequencies and the hysteretic damping of soil deposits and provide more accurate results with fewer DOFs.

Research on Top-layer Planning and Overall Design Project Decision of Weapon System Based on Analytic Hierarchy Process

Based on analytic hierarchy process(AHP) theory,a vital important problem for top-layer planning and overall design of modern self-propelled gun-howitzer system,namely overall project decision-making,was analyzed.A hierarchy model was built to solve the complex and uncertain problem,and a decision-making index system was established.Then,the weights in all layers of the model were determined by simulating experts.Finally,according to the calculated results of the elements in each layer,the weights of the alternatives to the overall goal were calculated to conduct the hierarchy total decision.A decision example shows that the overall project of a self-propelled gun-howitzer A is much better than that of another self-propelled gun-howitzer B,digitalized in comprehensive efficiency,operability,system accuracy and economy,but inferior to it in the information capability,and there exists relatively larger gap between them in the information sharing index.

Cross-layer design of combining AMC with HARQ in cooperative relay system with perfect and imperfect CSI

A cross-layer design which combines adaptive modulation and coding (AMC) at the physical layer with a hybrid automatic repeat request (HARQ) protocol at the data link layer (LL) is presented, in cooperative relay system over Nakagami-m fading channels with perfect and imperfect channel state information (CSI). In order to maximize spectral efficiency (SE) under delay and packet error rate (PER) performance constraints, a state transition model and an optimization framework with perfect CSI are presented. Then the framework is extended to cooperative relay system with imperfect CSI. The numerical results show that the scheme can achieve maximum SE while satisfying transmitting delay requirements. Compared with the imperfect CSI, the average PER with perfect CSI is much lower and the spectral efficiency is much higher.

An Application of the RAMS/FLUENT System on the Multi-Scale Numerical Simulation of the Urban Surface Layer—A Preliminary Study

The Regional Atmospheric Modeling System （RAMS） and the computational fluid dynamics （CFD） codes known as FLUENT are combinatorially applied in a multi-scale numerical simulation of the urban surface layer （USL）. RAMS and FLUENT are combined as a multi-scale numerical modeling system, in which the RAMS simulated data are delivered to the computational model for FLUENT simulation in an offline way. Numerical simulations are performed to present and preliminarily validate the capability of the multi-scale modeling system, and the results show that the modeling system can reasonably provide information on the meteorological elements in an urban area from the urban scale to the city-block scale, especially the details of the turbulent flows within the USL.

New multi-layer data correlation algorithm for multi-passive-sensor location system

Under the scenario of dense targets in clutter, a multi-layer optimal data correlation algorithm is proposed. This algorithm eliminates a large number of false location points from the assignment process by rough correlations before we calculate the correlation cost, so it avoids the operations for the target state estimate and the calculation of the correlation cost for the false correlation sets. In the meantime, with the elimination of these points in the rough correlation, the disturbance from the false correlations in the assignment process is decreased, so the data correlation accuracy is improved correspondingly. Complexity analyses of the new multi-layer optimal algorithm and the traditional optimal assignment algorithm are given. Simulation results show that the new algorithm is feasible and effective.

Regulation of the Reacted Layer Thickness in a Gas-Solid Reacting System

A mathematical model for the analysis of a gas-solid reacting system is presented. This model is an alternative to the classical shrinking-core model. The model has a structure that can be easily transformed into a canonical control form, which is proper for controller synthesis. Analytical solution of the model to describe the open-loop behavior is expressed in terms of the Lambert function. The Lambert function is evaluated from aTaylorexpansion series. Besides, a controller is proposed to regulate the reacted layer thickness using initially the diffusion coefficient as control input. The control law is synthesized employing the feedback linearization technique. Main contributions of this work are the synthesis of the layer thickness controller, and the employment of the process temperature as substitute of the diffusion coefficient as the control input.

Building up Multi－Layered Perceptrons as Classifier System for Decision Support

This paper focuses on some application issues in m.multi-layered perceptrons researches. The following problem areas are discussed: (1) the classification capability of multi-layered perceptrons; (2) theself-configuration algorithm for facilitating the design of the neural nets' structure;and,finally (3) the application of the fast BP algorithm to speed up the learning procedure. Some experimental results with respect to the application of multi-layered perceptrons as classifier systems in the comprehensive evaluation of Chinese large cities are presented.