Comparative study of aeroacoustic performance of 1/8 and 1/1 pantographs coupled with cavity

The technology of pantograph sinking in the cavity is generally adopted in the new generation of high-speed trains in China for aerodynamic noise reduction in this region. This study takes a high-speed train with a 4-car formation and a pantograph as the research object and compares the aerodynamic acoustic performance of two scale models, 1/8 and 1/1, using large eddy simulation and Ffowcs Williams–Hawkings integral equation. It is found that there is no direct scale similarity between their aeroacoustic performance. The 1/1 model airflow is separated at the leading edge of the panhead and reattached to the panhead, and its vortex shedding Strouhal number(St) is 0.17. However, the 1/8 model airflow is separated directly at the leading edge of the panhead, and its St is 0.13. The cavity's vortex shedding frequency is in agreement with that calculated by the Rooster empirical formula. The two scale models exhibit some similar characteristics in distribution of sound source energy, but the energy distribution of the 1/8 model is more concentrated in the middle and lower regions. The contribution rates of their middle and lower regions to the radiated noise in the two models are 27.3% and 87.2%, respectively. The peak frequencies of the radiated noise from the 1/1 model are 307 and 571 Hz. The 307 Hz is consistent with the frequency of panhead vortex shedding, and the 571 Hz is more likely to be the result of the superposition of various components. In contrast, the peak frequencies of the radiated noise from the 1/8 scale model are 280 and 1970 Hz. The 280 Hz comes from the shear layer oscillation between the cavity and the bottom frame, and the 1970 Hz is close to the frequency at which the panhead vortex sheds. This shows that the scaled model results need to be corrected before applying to the full-scale model.

Influence of Waveguide Properties on Wave Prototypes Likely to Accompany the Dynamics of Four-Wave Mixing in Optical Fibers

In this article, we study the impacts of nonlinearity and dispersion on signals likely to propagate in the context of the dynamics of four-wave mixing. Thus, we use an indirect resolution technique based on the use of the iB-function to first decouple the nonlinear partial differential equations that govern the propagation dynamics in this case, and subsequently solve them to propose some prototype solutions. These analytical solutions have been obtained;we check the impact of nonlinearity and dispersion. The interest of this work lies not only in the resolution of the partial differential equations that govern the dynamics of wave propagation in this case since these equations not at all easy to integrate analytically and their analytical solutions are very rare, in other words, we propose analytically the solutions of the nonlinear coupled partial differential equations which govern the dynamics of four-wave mixing in optical fibers. Beyond the physical interest of this work, there is also an appreciable mathematical interest.

Dynamical Properties of Two Coupled Dissipative QED Cavities Driven by Coherent Fields

When two identical QED cavities driven by the coherent fields are located in a uniform environment, in addition to dissipation, there appears an indirect coupling between the two cavities induced by the background fields. We investigate the effects of the coherent fields, the dissipation as well as the incoherent coupling on the following dynamical properties of the system： photon transfer, reversible decoherence, and quantum state transfer, etc. We find that the photons in the cavities do not leak completely into the environment due to the collective coupling between the cavities and the enviroment, and the photons are transferred irreversibly from the cavity with more photons to the cavity with less ones due to the incoherent coupling so that they are equally distributed among the two cavities. The coherent field pumping on the two cavities increases the mean photons, complements the revived magnitude of the reversible decoherence, but hinders the quantum state transfer between the two cavities. The above phenomena may find applications in quantum communication and other basic fields.

Quantum dynamic behaviour in a coupled cavities system

The dynamic behaviour of the two-site coupled cavities model which is doped with ta wo-level system is investi-gated. The exact dynamic solutions in the general condition are obtained via Laplace transform. The simple analytical solutions are obtained in several particular cases, which demonstrate the clear and simple physical picture for the quan-tum state transition of the system. In the large detuning or hoppling case, the quantum states transferring between qubits follow a slow periodic oscillation induced by the very weak excitation of the cavity mode. In the large coupling case, the system can be interpreted as two Jaynes-Cummings model subsystems which interact through photon hop between the two cavities. In the case of λ≈△〉〉 g, the quantum states transition of qubits is accompanied by the excitation of the cavity, and the cavity modes have the same dynamic behaviours and the amplitude of probability is equM to 0.25 which does not change with the variation of parameter.

Entanglement of two two-level atoms trapped in coupled cavities with a Kerr medium

In this paper, the entanglement dynamics of two two-level atoms trapped in coupled cavities with a Kerr medium is investigated, We find that the phenomena of entanglement sudden death （ESD） and entanglement sudden birth （ESB） appear during the evolution process. The influences of initial atomic states, Kerr medium, and cavity-cavity hopping rate on the atom-atom entanglement are discussed. The results obtained by the numerical method show that the atom- atom entanglement is strengthened and even prevented from ESD with increasing cavity-cavity hopping rate and Kerr nonlinearity.

High efficiency of Brillouin scattering behavior in single-mode Ge–As–Se–Te fibers at 2μm

The Brillouin characteristics of step-index Ge–As–Se–Te(GAST)fibers at 2μm are designed and simulated on the basis of optical and acoustic properties.The refractive indexes of Ge_(20)As_(20)Se_(45)Te_(15)glass and Ge_(20)As_(20)Se_(43)Te_(17)glass serving as fiber core and cladding are 3.20 and 3.18 at 2μm,and their acoustic velocities are 2200 m/s and 2300 m/s,respectively.Numerical results indicate that the stimulated Brillouin scattering(SBS)efficiency is 248 m^(-1)·W^(-1),and the Brillouin threshold power is 66 m W when the core diameter of the 2-m-long GAST fiber is 4μm at 2-μm wavelength.The optic–acoustic coupling factor,the Brillouin frequency shift,and the Brillouin gain coefficient are 0.98,7.02 GHz,and 3.81×10^(-9)m/W,respectively.The SBS effect of GAST fibers simulated for the first time provides a new promising approach to selecting gain medium based on 2-μm-wavelength fiber laser.

Quantum Information Processing in An Array of Fiber Coupled Cavities

We consider a fiber coupled cavity array. Each cavity is doped with a single two-level atom. By treating the atom-cavity systems as combined polaritonie qubits, we can transform it into a polaritonic qubit-qubit array in the dispersive regime. We show that the four fiber coupled cavity open chain and ring can both generate the four qubit W state and cluster state, and can both transfer one and two qubit arbitrary states. We also discuss the dynamical behaviors of the four fiber coupled cavity array with unequal couplings.

Optimization of the S-band side-coupled cavities for proton acceleration

The proton beam with energy around 100 MeV has seen wide applications in modern scientific research and in various fields.However,proton sources in China fall short for meeting experimental needs owing to the vast size and expensive traditional proton accelerators.The Institute of Nuclear Science and Technology of Sichuan University proposed to build a 3 GHz side-coupled cavity linac(SCL)for re-accelerating a 26 MeV proton beam extracted from a CS-30 cyclotron to 120 MeV.We carried out investigations into several vital factors of S-band SCL for proton acceleration,such as optimization of SCL cavity geometry,end cell tuning,and bridge coupler design.Results demonstrated that the effective shunt impedance per unit length ranged from 22.5 to 59.8 MX/m throughout the acceleration process,and the acceleration gradient changed from 11.5 to 15.7 MV/m when the maximum surface electric field was equivalent to Kilpatrick electric field.We obtained equivalent circuit parameters of the biperiodic structures and applied them to the end cell tuning;results of the theoretical analysis agreed well with the 3D simulation.We designed and optimized a bridge coupler based on the previously obtained biperiodic structure parameters,and the field distribution un-uniformness was\1.5%for a two-tank module.The radio frequency power distribution system of the linac was obtained based on the preliminary beam dynamics design.

Polarization-Dependent Optimization of Fiber-Coupled Terahertz Time-Domain Spectroscopy System

The optimization of the fiber-coupled terahertz time-domain spectroscopy（THz-TDS） system is performed by changing the polarization of the optical excitation pulse centered at 1550 nm. In Ga As/In Al As multilayer structures based photoconductive antennas are used in TDS setup as both the emitter and receiver. The experimental results demonstrate that not only the THz signal power but also the temporal waveform vary with the rotation of the exciting pulse polarization. Maximum output power of the emitter is obtained when the polarization of the pump pulse is perpendicular to the edge of the metal electrodes. At this moment the THz waveform is close to a single-cycled pulse. However, double THz pulses could be recorded when the pump laser polarization is parallel to the electrodes. Laser pulse splitting induced by the birefringence of the optical fiber may attribute to the polarizationdependent performance of the fiber-coupled THz-TDS system.

Theoretical analysis of the mode coupling induced by heat of large-pitch micro-structured fibers

In this paper,a theoretical model to analyze the mode coupling induced by heat,when the fiber amplifier works at high power configuration,is proposed.The model mainly takes into consideration the mode field change due to the thermally induced refractive index change and the coupling between modes.A method to predict the largest average output power of fiber is also proposed according to the mode coupling theory.The largest average output power of a large pitch fiber with a core diameter of 190 μm and an available pulse energy of 100 mJ is predicted to be 540 W,which is the highest in large mode field fibers.

Energy Levels of Coupled Plasmonic Cavities

We demonstrate the hybridization of the plasmonic modes in directly coupled whispering gallery cavities fabricated on silver films and present the mode patterns and energy levels using cathodoluminescence spectroscopy. Although the energy of the most antisymmetrically coupled modes is higher than that of the corresponding symmetrically coupled ones, the contrary cases happen for small quantum number modes. We attribute the phenomenon to the different surface plasmon polariton paths between the symmetrically and antisymmetrically coupled modes; These results provide an understanding of the resonant properties in coupled plasmonic cavities, which have potential applications in nanophotonic devices.

Synchronous detection of multiple optical characteristics of atmospheric aerosol by coupled photoacoustic cavity

Owing to the influence of sampling loss,cavity difference and detecting source,the multi-optical parameter measurement of atmospheric aerosol cannot be detected simultaneously in the same reference environment.In order to solve this problem,a new method of simultaneously detecting the aerosol optical parameters by coupling cavity ring-down spectrometer with photoacoustic spectroscopy is proposed.Firstly,the coupled photoacoustic cavity is formed by the organic fusion of the photoacoustic cavity and the ring-down cavity.Secondly,the integrated design of the coupling spectroscopy system is carried out.Finally,the extinction coefficient and absorption coefficient of aerosol are measured simultaneously by the system,and then the aerosol scattering coefficient and single albedo are calculated indirectly.The accuracy of the system is verified by comparing with the data from the environmental quality monitoring station,which provides a new idea for the detection of multi-optical characteristics of atmospheric aerosol.

Entanglement Dynamics of Two Qubits Coupled Independently to Cavities in the Ultrastrong Coupling Regime:Analytical Results

Dynamics of quantum entanglement of two qubits in two identical quantum Rabi models is studied analytically in the framework of corrections to the rotating-wave approximations. A closed-form expression for the entanglement dynamics initiated from the well-known Bell states is derived, which is very close to the numerical exact results up to the ultrastrong coupling regime. It is found that the vanishing entanglement can be purely induced by the counter-rotating terms, and can be enhanced with the atom-cavity coupling.

Novel method to measure unloaded quality factor of resonant cavities at room temperature

We demonstrated a novel method to measure the unloaded quality factor(Q factor) of high-Q resonant cavities. This method was used to obtain data with low errors and calculate the unloaded Q factor. This procedure was more reliable than traditional methods. The data required for the method were near the resonant frequency,not at the half-power points of the reflection coefficient curve or Smith chart. We applied the new method to measure a resonant cavity with an unloaded Q factor of^100,000, obtaining good agreement between the measured and theoretical results.

Single photon transport properties in coupled cavity arrays nonlocally coupled to a two-level atom in the presence of dissipation

We discuss the effects of dissipation on the behavior of single photon transport in a system of coupled cavity arrays, with the two nearest cavities nonlocally coupled to a two-level atom. The single photon transmission amplitude is solved exactly by employing the quasi-boson picture. We investigate two different situations of local and nonlocal couplings, respectively. Comparing the dissipative case with the nondissipative one reveals that the dissipation of the system increases the middle dip and lowers the peak of the single photon transmission amplitudes, broadening the line width of the transport spectrum. It should be noted that the influence of the cavity dissipation to the single photon transport spectrum is asymmet- ric. By comparing the nonlocal coupling with the local one, one can find that the enhancement of the middle dip of single photon transmission amplitudes is mostly caused by the atom dissipation and that the reduced peak is mainly caused by the cavity dissipation, no matter whether it is a nonlocal or local coupling case. Whereas in the nonlocal coupling case, when the coupling strength gets stronger, the cavity dissipation has a greater effect on the single photon transport spectrum and the atom dissipation affection becomes weak, so it can be ignored.

Suppression of Cladding Mode Coupling by B/Ge Codoped Photosensitive Fiber With Photosensitive and Depressed Inner Cladding

Excess loss on the short wavelength side of the Bragg resonant wavelength caused by cladding mode coupling limits wide use of grating in the fiber communication system, especially in densed wavelength division multiplexing (DWDM) system. A novel photosensitive fiber design that have depressed cladding and photosensitive inner cladding in the same fiber is proposed, which can suppress cladding mode coupling greatly. Using MCVD method B/Ge codoped fiber with depressed cladding was fabriceted out, which was also doped in boron and germanium and had the photosensitivity. Finally, the transmission spectrum of written grating in this fiber by phase mask method verified its larger photosensitivity and greatly suppression of cladding mode coupling.

Linear theory of beam–wave interaction in double-slot coupled cavity travelling wave tube

A three-dimensional model of the double-slot coupled cavity slow-wave structure （CCSWS） with a solid round elec- tron beam for the beam-wave interaction is presented. Based on the ＂cold＂ dispersion, the ＂hot＂ dispersion equation is derived with the Maxwell equations by using the variable separation method and the field-matching method. Through numerical calculations, the effects of the electron beam parameters and the staggered angle between adjacent walls on the linear gain are analyzed.

Development of a low-loss magnetic-coupling pickup for 166.6-MHz quarter-wave beta=1 superconducting cavities

166.6-MHz quarter-waveβ=1 superconducting cavities have been adopted for the High Energy Photon Source,a 6-GeV diffraction-limited synchrotron light source currently under construction.A large helium jacket was required to accommodate the enlarged cavity beam pipe for the heavy damping of higher-order modes;the original electric-probe pickup thus becomes inevitably long with unfavorable mechanical properties.Relocated to an existing high-pressure-rinsing port,a magnetic-loop pickup was designed,characterized by low radio-frequency and cryogenic losses and being multipacting-free and insensitive to manufacturing and assembly tolerances.The consequent removal of the original pickup port from the cavity largely simplified the helium jacket fabrication and may also reduce cavity contamination.This paper presents a comprehensive design of a low-loss magnetic-coupling pickup for quarter-waveβ=1 superconducting cavities.The design can also be applied to other non-elliptical structures.

Wavelength dependent loss of splice of single-mode fibers

After reviewing three different definitions of mode field diameter of single-mode fibers, coupled efficiency calculation methods associated with lateral offset, longitude separation and wavelength, the effects produced by them, and the influences of splicing defects were discussed in detail. The regularities of the effects were studied according to the first order derivation of couple efficiency formula, and a simplified formula for couple efficiency calculation was presented under the circumstance of slight misalignment, with respect to wavelength, 2, and in a good agreement with the theoretical model. The simplified formula provides a new but simple approach to evaluate wavelength dependent couple efficiency of single-mode fibers. Theoretical analyses and numerical calculations show that, when those defects exist, the wavelength produces additional effects on the couple loss that growth of wavelength causes an increase on the couple efficiency for the lateral offset or longitude separation whereas lessens the couple efficiency due to angular misalignment or mode fields mismatching, and that the wavelength degrades the couple efficiency distinctly when λ≥2.5 μm whereas it distorts the couple slightly in range of λ≤2λ≤2 μm.

Characteristics of High-power GaAs Laser Beams and Their Coupling with Fibers

The beams of 980nm high-power LDs are analyzed, and the reasons that aspect ratio of LD beams is high are explained. It is certified by the test that cylindrical lens can efficiently compress the perpendicular divergence angle of the beam. Some typical and popular lensed fibers were compared and analyzed according to coupling characteristics. The factors which affect the coupling efficiency and tolerance of the wedged-shaped GRIN tipped lensed fiber are pointed out, and some methods to reduce the coupling loss of the lensed fibers are proposed finally.