Reactor protection system testing for the solid fuel thorium molten salt reactor

Safety system testing is one of the most rigorous and time-consuming requirements in the verification and validation process for reactor protection systems(RPSs).This paper presents the development of a test system for the fully digital and field-programmable gate array-based RPS of the solid fuel(SF) thorium-breeding molten salt pebble bed fluoride salt-cooled reactor(TMSR),denoted as the TMSR-SF1 project,developed by the Chinese Academy of Sciences.The test system is applied to the RPS to ensure that it fully meets its designed functions and system specifications.We first introduce the testing principles and methods.Then,the hardware component designs and the software program development of the test system are discussed.Finally,the test process and test results are discussed and summarized.

Adaptive Signal Conditioning Technology in Fighter Weapon System Test

In order to realize the real-time and precise test for a weapon system of a certain type of fighter,a signal classification method according to attributes is proposed,common input channels for multiple signals are configured optimally,and a test adapter and an adaptive signal conditioning module is designed. The hardware of conditioning module can be configured flexibly and the programmable test range can be adjusted owing to programmable multiplexer. An FPGA adaptive filter is designed by the calculated filter coefficient vectors with LMS method to solve the problem of parallel test of fighter weapon system in electromagnetic interference environment. The adaptive signal conditioning technology is characterized by high efficiency,precision and integration. Its application makes the test system successful to conduct real-time and parallel test for a weapon system,which is developed based on VXI bus and virtual-instrument technology.

μ-Synthesis control with reference model for aeropropulsion system test facility under dynamic coupling and uncertainty

Due to the dynamic coupling and multi-source uncertainties,it is difficult to accurately control the pressure and temperature of the Aeropropulsion System Test Facility(ASTF)in the presence of rapid command and large disturbance.This paper presents the design ofμ-synthesis control to solve the problem.By incorporating the pressure ratio into the linear equation of the control valve,the modeling error of ASTF in the low frequency range is effectively reduced.Then,an uncertain model is established by considering various factors,including parameter variations,modeling error in the low frequency range,unmodeled dynamics,and changes in the working point.To address the dynamic coupling,a diagonal reference model with desired performance is incorporated intoμ-synthesis.Furthermore,all weighting functions are designed according to the performance requirements.Finally,theμ-controller is obtained by using the standardμ-synthesis method.Simulation results indicate that theμ-controller decouples the pressure and temperature dynamics of ASTF.Compared with the multivariable PI controller,integral-μcontroller,and double integral-μcontroller,the proposedμ-controller can achieve higher transient accuracy and better disturbance rejection.Moreover,the robustness of theμ-controller is demonstrated by Monte Carlo simulations.

test252 kV三相机械联动GIS用断路器的T100s合并试验

交流高压断路器标准GB/T 1984—2014中规定了中性点有效和非有效接地系统的合并试验,但是不涉及60Hz的工况,对应STL导则中针对IEC 62271-100有50/60Hz合并试验的描述,但是国内厂家50/60Hz通常是分开试验的。文章通过介绍252kV断路器T100s的多参数的合并试验,提供了一种可以多参数试验的试验方法,指出了多参数合并试验的利弊,对后续其他类似多参数合并试验提供了有效参考。

Constructing Test Suites for k-n Softw are System

In software testing,many troublesome faults are caused by interaction of input parameters. If automatic efficient test-case generator( AETG) ,in parameter order( IPO) or orthogonal Latin square is used in the software system under test,the whole test set cannot be run completely due to time or budget constraints. In this paper,according to the number of parameter k and their values n,a software system under test can be divided into four types. As for k-2 system,an algorithm was proposed to construct test cases,based on the longitudinal binary string set and method of controlling variables. As for k -n valued parameters whose n was a prime or power of prime,a method of covering array of test sets was designed to construct test sets by taking orthogonal array and derive arrays from orthogonal array and two useful conditions. As for k parameters whose n-value was not all equal,an experience algorithm was presented in this paper. The experimental results show that the size of test sets from the proposed methods is better than that from AETG,IPO,and orthogonal Latin square.

Model test investigation on an innovative lifting system for deepwater riser installation

An S-lay crane barge,named CNOOC 201,has been built for pipe laying in deepwater oil/gas fields in the South China Sea.It is due to be commissioned by the end of the year 2010.A special lifting system is developed to meet the challenge that installing deepwater risers from an S-lay barge is difficult and has not been achieved.The purpose of this paper was to investigate the model test on such an innovative system,which has to be done before field application.By applying the similarity theory,the movement of the S-lay barge is simulated through a six degrees-of-freedom motion platform,and a truncated model riser is utilized for the model testing.The displacement and force boundary conditions at the truncated position of the riser are obtained from the catenary governing equation and become realized by a slideway cart and a loading system designed to control the configuration of the model riser,which presents a similar configuration to a real riser in deepwater.The test results are in very good agreement with theoretical calculations,showing that the active truncated test is applicable for controlling the configuration of the deepwater riser in model testing investigation.

Research on Testing Technologies of Network System in Smart Substations

The network structures of smart substations and the characteristics of industrial Ethernet switches are analyzed.The testing technologies of network systems based on smart substations are specifically elaborated.A viewpoint is proposed that special testing policy&method of smart substation networks should be followed,so that the results can reveal the real network data exchange performance of the whole station.This view ensures the safety and stability of smart substations and lays a foundation for future upgrades and expansions.

Virtual test system for permanent-magnet DC motor

In order to obtain the primary parameters and operating characteristics of a DC motor without directly measuring its torque and rational speed, it is proposed to use a PC and a data acquisition card to acquire both the dynamic and static data of armature current to establish the performance of a DC permanent magnet motor. The accuracy and validity of this virtual test system proposed were verified by comparing the measurements made with the system proposed with the measurements made with conventional torque meters. It is concluded from the results of comparison that from the mathematic model established for the DC permant magnet motors, both major parameters and operating characteristics can be directly established for the DC motors without measuring their torques and rotational speed, a perfect on line measurement and test system has been established for the DC permanent magnet motors using the theory of virtual test system. The system proposed features shorter test time, higher efficiency and lower cost.

Random testing for system-level functional verification of system-on-chip

In order to deal with the limitations during the register transfer level verification, a new functional verification method based on the random testing for the system-level of system-on-chip is proposed.The validity of this method is proven theoretically.Specifically, testcases are generated according to many approaches of randomization.Moreover, the testbench for the system-level verification according to the proposed method is designed by using advanced modeling language.Therefore, under the circumstances that the testbench generates testcases quickly, the hardware/software co-simulation and co-verification can be implemented and the hardware/software partitioning planning can be evaluated easily.The comparison method is put to use in the evaluation approach of the testing validity.The evaluation result indicates that the efficiency of the partition testing is better than that of the random testing only when one or more subdomains are covered over with the area of errors, although the efficiency of the random testing is generally better than that of the partition testing.The experimental result indicates that this method has a good performance in the functional coverage and the cost of testing and can discover the functional errors as soon as possible.

New Stability Tests of Positive Standard and Fractional Linear Systems

New tests for checking asymptotic stability of positive 1D continuous-time and discrete-time linear systems without and with delays and of positive 2D linear systems described by the general and the Roesser models are proposed. Checking of the asymptotic stability of positive 2D linear systems is reduced to checking of suitable corresponding 1D positive linear systems. It is shown that the stability tests can be also applied to checking the asymptotic stability of fractional discrete-time linear systems with delays. Effectiveness of the tests is shown on numerical examples.

Modeling and Simulation for Complex Repairable System with Built-in Test Equipment

In order to research the effects of built-in test(BIT) on the system and select BITand test strategy,the complex repairable systems with BITequipment are modeled and simulated by using Simulink.Based on the model,the influences of different built-in test equipments,maintenance time and error probabilities on the system usability are evaluated.The simulation results showthat they effect on the system differently.The simulation method of complex system based on Simulink provides a technique approach to research the effects of BITon the system and select BITand test strategy.

Room-temperature test system for 162.5 MHz high-power couplers

Fundamental power couplers are crucial components for feeding radio frequency power to accelerating cavities. Couplers must be tested and conditioned on a room-temperature test stand to evaluate and potentially improve their performance before being installed in an accelerating cavity. A new test system has been designed and is under construction at the institute of modern physics.For this test system, multiple conditioning modes, including the pulse mode, CW mode, and amplitude-sweeping mode, have been embedded in the low-level radio frequency system of the test stand. All of these conditioning modes can be run manually or automatically. In addition, a novel test cavity is proposed and has been designed, which facilitates non-contact conditioning and a multi-purpose test stand.

Delay Trigger in the Application of Network Testing System

The researchers who study the local area network( LAN) eXtension for instrumentation( LXI) instrument are pursuing instrument's high-precision synchronization. In the paper,three synchronization modes were discussed which were clock synchronization, trigger synchronization, and response synchronization. Synchronous process between LXI instruments was analyzed and each time factor affecting the synchronization accuracy was discussed. On the basis of the analysis,it can be found that delay trigger plays an important role in the network testing system's synchronization. Delay trigger can produce an additional time interval to correct the difference of each LXI instrument's response time. Then,a method to realize the delay trigger was introduced. Delay time can be adjustable according to the actual demand. Finally,synchronization accuracy of network testing system can reach nanoseconds.

Ant colony optimization approach for test scheduling of system on chip

It is necessary to perform the test of system on chip,the test scheduling determines the test start and finishing time of every core in the system on chip such that the overall test time is minimized.A new test scheduling approach based on chaotic ant colony algorithm is presented in this paper.The optimization model of test scheduling was studied,the model uses the information such as the scale of test sets of both cores and user defined logic.An approach based on chaotic ant colony algorithm was proposed to solve the optimization model of test scheduling.The test of signal integrity faults such as crosstalk were also investigated when performing the test scheduling.Experimental results on many circuits show that the proposed approach can be used to solve test scheduling problems.

ASP在Online Testing System中的应用

随着Internet的日益发展、普及,人们对WEB的要求越来越高,需要灵活的动态网页技术。动态网页技术ASP具有保密性好、与所有脚本语言兼容、易编写、无需编译等特点,且ASP在与数据库的连接上采用ADO(ActiveX Data Objects)技术访问后台数据库,这些深受网页制作者的欢迎。在Online Testing System中动态网页制作中采用ASP,具有一定实用价值。

Testing Result Statistics-Based Rapid Testing Method for Safety-Critical System

Safety-critical system （SCS） has highly demand for dependability, which requires plenty of resource to ensure that the system under test （SUT） satisfies the dependability requirement. In this paper, a new SCS rapid testing method is proposed to improve SCS adaptive dependability testing. The result of each test execution is saved in calculation memory unit and evaluated as an algorithm model. Then the least quantity of scenario test case for next test execution will be calculated according to the promised SUT＇s confidence level. The feedback data are generated to weight controller as the guideline for the further testing. Finally, a compre- hensive experiment study demonstrates that this adaptive testing method can really work in practice. This rapid testing method, testing result statistics-based adaptive control, makes the SCS dependability testing much more effective.

Integrating Electronic Systems for Requesting Clinical Laboratory Test into Digital Clinical Records: Design and Implementation

Clinical laboratory tests are basic elements that support healthcare tasks such as disease detection, diagnosis and monitoring of response to treatments. Current laboratory information systems focus on the patient database, tests and results, with multiple modules available, connecting with the various analytical systems or work areas. However laboratory information systems functioned as “islands of information”, because their design was fundamentally inward-looking and disconnected from other healthcare computer applications. Actually, the Electronic Health Register (EHR) is considered by clinicians as a tool with great potential healthcare benefits. The EHR, in the sense of a unique and complete record of a patient’s healthcare and state of health, regardless of the healthcare level used, is a real attempt to eliminate these “islands of information” and need modules to act as “bridges” with the laboratory information systems. This type of module, which in generic terms may be referred to as a laboratory test request module, has become an essential feature of the EHR. These modules need to use a laboratory coding system as a common language for exchanging information, ensuring that tests and results are unequivocally identified. The development of the laboratory test request module requires the commitment of professionals and political authorities, being necessary time for their design and an adequate pilot phase. The laboratory professionals have to assume a leadership role in the whole process of design, development and implementation of these modules, integrating in the equipment of information technologies of healthcare providers. In our manuscript we review the elements that may prove electronic systems for requesting clinical laboratory test into digital clinical records and the key elements to move from theory to practice.

Implementation of Dynamic System Control Circuit Board Test System of Pure Electric Vehicles

The dynamic system control circuit board(DSCCB)is one of the most important components for dynamic system of pure electric vehicles. The current detection of the DSCCB is done manually, which is not only inefficient in the detection but also difficult to guarantee the data accuracy. In order to improve the detection efficiency and accuracy, a new testing system is designed by Labview. The total test time can be further reduced by about 75% compared with the results of the manual detection. In this paper, the three-parameter sine wave curve-fit algorithm theory is applied to the phase delay detection of the current sensor sampling circuit on the DSCCB. This method solves the problem of big error in the phase delay detection.

Test system of the front-end readout for an application-specific integrated circuit for the water Cherenkov detector array at the large high-altitude air shower observatory

The water Cherenkov detector array(WCDA) is an important part of the large high-altitude air shower observatory(LHAASO),which is in a research and development phase.The central scientific goal of LHAASO is to explore the origin of high-energy cosmic rays of the universe and to push forward the frontier of new physics.To simplify the WCDA's readout electronics,a prototype of a front-end readout for an application-specific integrated circuit(ASIC) is designed based on the timeover-threshold method to achieve charge-to-time conversion.High-precision time measurement and charge measurement are necessary over a full dynamic range[1-4000photoelectrons(P.E.)].To evaluate the performance of this ASIC,a test system is designed that includes the front-end ASIC test module,digitization module,and test software.The first module needs to be customized for different ASIC versions,whereas the digitization module and test software are tested for general-purpose use.In the digitization module,a field programmable gate array-based time-todigital converter is designed with a bin size of 333 ps,which also integrates an inter-integrated circuit to configure the ASIC test module,and a universal serial bus interface is designed to transfer data to the remote computer.Test results indicate that the time resolution is better than 0.5 ns,and the charge resolution is better than 30%root mean square(RMS) at 1 P.E.and 3%RMS at 4000 P.E.,which are beyond the application requirements.