期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
Micro sliding friction model considering periodic variation stress distribution of contact surface and experimental verification
1
作者 卢晟昊 韩靖宇 阎绍泽 《Chinese Physics B》 SCIE EI CAS CSCD 2023年第4期452-466,共15页
Micro sliding phenomenon widely exists in the operation process of mechanical systems,and the micro sliding friction mechanism is always a research hotspot.In this work,based on the total reflection method,a measuring... Micro sliding phenomenon widely exists in the operation process of mechanical systems,and the micro sliding friction mechanism is always a research hotspot.In this work,based on the total reflection method,a measuring device for interface contact behavior under two-dimensional(2D)vibration is built.The stress distribution is characterized by the light intensity distribution of the contact image,and the interface contact behavior in the 2D vibration process is studied.It is found that the vibration angle of the normal direction of the contact surface and its fluctuation affect the interface friction coefficient,the tangential stiffness,and the fluctuation amplitude of the stress distribution.Then they will affect the change of friction state and energy dissipation in the process of micro sliding.Further,an improved micro sliding friction model is proposed based on the experimental analysis,with the nonlinear change of contact parameters caused by the normal contact stress distribution fluctuation taken into account.This model considers the interface tangential stiffness fluctuation,friction coefficient hysteresis,and stress distribution fluctuation,whose simulation results are consistent well with the experimental results.It is found that considering the nonlinear effect of a certain contact parameter alone may bring a greater error to the prediction of friction behavior.Only by integrating multiple contact parameters can the accuracy of friction prediction is improved. 展开更多
关键词 periodic variation stress distribution micro sliding friction model tangential stiffness experimental analysis STICK-SLIP
下载PDF
考虑切向刚度变化裂纹转子的分叉与混沌 被引量:3
2
作者 沈新亮 邹剑 +1 位作者 陈进 董广明 《机械设计》 CSCD 北大核心 2014年第11期101-107,共7页
基于不附加任何假设的裂纹模型,考虑切向刚度变化,建立裂纹转子无量纲动力学模型,可适用于瞬态、稳态、非线性等不同运动状态。采用分叉图、Pioncaré映射、轴心轨迹、频谱图、最大Lyapunov指数等,分析裂纹法向刚度变化、切向刚度... 基于不附加任何假设的裂纹模型,考虑切向刚度变化,建立裂纹转子无量纲动力学模型,可适用于瞬态、稳态、非线性等不同运动状态。采用分叉图、Pioncaré映射、轴心轨迹、频谱图、最大Lyapunov指数等,分析裂纹法向刚度变化、切向刚度变化、质量偏心与质量偏心角对裂纹转子分叉与混沌特性的影响,发现:随着裂纹法向刚度变化的增加,裂纹转子在亚临界转速区出现倍周期分叉、拟周期、周期3解等振动形式;考虑裂纹切向刚度变化,裂纹转子在1/2,2/3亚临界转速区出现拟周期、混沌运动,进入混沌的途径与拟周期、周期3解有关;质量偏心的增加或质量偏心角180°时,对裂纹转子的非线性运动具有明显的抑制作用。数值仿真研究可为工程实际中裂纹转子故障诊断提供依据。 展开更多
关键词 裂纹转子 切向刚度变化 质量偏心 分叉 混沌
下载PDF
形状记忆合金/聚合物有效时变和伪弹性响应的变分渐近细观力学 被引量:1
3
作者 钟轶峰 黄子昂 +1 位作者 夏振庭 梅宝平 《复合材料学报》 EI CAS CSCD 北大核心 2017年第11期2446-2454,共9页
为有效模拟形状记忆合金增强聚合物基复合材料(SMA/PMCs)有效时变和伪弹性响应,基于变分渐近理论框架构建增量型细观力学模型。首先分别导出聚合物和形状记忆合金增量本构方程,建立统一的本构方程;以此为基础推导出能量泛函的变分表达... 为有效模拟形状记忆合金增强聚合物基复合材料(SMA/PMCs)有效时变和伪弹性响应,基于变分渐近理论框架构建增量型细观力学模型。首先分别导出聚合物和形状记忆合金增量本构方程,建立统一的本构方程;以此为基础推导出能量泛函的变分表达式。考虑材料的时变和非线性特征,建立与求解切向瞬时有效矩阵有关的增量过程,并通过有限元数值实现。通过数值算例表明:构建的模型可用于模拟SMA/PMCs在不同加载率和温度下的有效时变、伪弹性响应,准确捕捉聚合物基体黏弹性诱发的复合材料率相关、滞回行为等。 展开更多
关键词 形状记忆合金 伪弹性行为 切向瞬时刚度矩阵 细观力学模型 变分渐近法
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部