Line spectrum detection algorithm based on the phase feature of target radiated noise

In order to improve the performance of line spectrum detection,according to the feature that the underwater target radiated noise containing stable line spectrum,the differences of the phase difference between line spectrum and background noise,a weighted line spectrum detection algorithm based on the phase variance is proposed in frequency domain.After phase difference alignment,the phase variance of line spectrum and the phase of background noise,respectively,are small and big in frequency domain,this method utilizes the weighted statistical algorithm to cumulate the frequency spectrum based on the phase variance,which can restrain the background noise disturbance,and enhance the signal to noise ratio（SNR）.The theory analysis and experimental results both verify that the proposed method can well enhance the energy of line spectrum,restrain the energy of background noise,and have better detection performance under lower SNR.

A novel method based on entransy theory for setting energy targets of heat exchanger network

A T-Q diagram based on entransy theory is applied to graphically and quantitatively describe the irreversibility of the heat transfer processes.The hot and cold composite curves can be obtained in the T-Q diagram.The entransy recovery and entransy dissipation that are affected by temperature differences can be obtained through the shaded area under the composite curves.The method for setting the energy target of the HENs in T-Q diagram based on entransy theory is proposed.A case study of the diesel oil hydrogenation unit is used to illustrate the application of the method.The results show that three different heat transfer temperature differences is 10 K,15 K and 20 K,and the entransy recovery is 5.498×10~7k W·K,5.377×10~7k W·K,5.257×10~7k W·K,respectively.And the entransy transfer efficiency is 92.29%,91.63%,90.99%.Thus,the energy-saving potential of the HENs is obtained by setting the energy target based on the entransy transfer efficiency.

Investigation of system structure and information processing mechanism for cognitive skywave over-the-horizon radar

Based on the cognitive radar concept and the basic connotation of cognitive skywave over-the-horizon radar（SWOTHR）, the system structure and information processingmechanism about cognitive SWOTHR are researched. Amongthem, the hybrid network system architecture which is thedistributed configuration combining with the centralized cognition and its soft/hardware framework with the sense-detectionintegration are proposed, and the information processing framebased on the lens principle and its information processing flowwith receive-transmit joint adaption are designed, which buildand parse the work law for cognition and its self feedback adjustment with the lens focus model and five stages informationprocessing sequence. After that, the system simulation andthe performance analysis and comparison are provided, whichinitially proves the rationality and advantages of the proposedideas. Finally, four important development ideas of futureSWOTHR toward ＂high frequency intelligence information processing system＂ are discussed, which are scene information fusion, dynamic reconfigurable system, hierarchical and modulardesign, and sustainable development. Then the conclusion thatthe cognitive SWOTHR can cause the performance improvement is gotten.

Formation Process of Magnetized Fusion Target on the YingGuang 1 Device

Magnetized target fusion is an alternative method to fulfill the goal of controlled fusion, which combines advan- tages of both magnetic confinement fusion and inertial confinement fusion since its parameter space lies between the two traditional ways. Field reversed configuration （FFtC） is a good candidate of magnetized targets due to its translatable, compressible, high /3 and high energy density properties. Dynamic formation process of high density FFtC is observed on the YingGuang 1 device for the first time in China. The evolution of a magnetic field is detected with magnetic probes, and the compression process can be clearly seen from images taken with a high-speed multi-frame CCD camera. The process is also studied with two-dimensional magneto hydrodynamic code MPF-2D theoretically, and the results agree well with the experiment. Combining the experimental data and the theoretical analysis, the length of the formed FRC is about 39 cm, the diameter is about 2-2. 7cm, the average density is 1.3× 1016 cm-3, and the average temperature is 137eV.

A systematic approach for synthesizing a low-temperature distillation system

In this paper, by combining a stochastic optimization method with a refrigeration shaft work targeting method,an approach for the synthesis of a heat integrated complex distillation system in a low-temperature process is presented. The synthesis problem is formulated as a mixed-integer nonlinear programming(MINLP) problem,which is solved by simulated annealing algorithm under a random procedure to explore the optimal operating parameters and the distillation sequence structure. The shaft work targeting method is used to evaluate the minimum energy cost of the corresponding separation system during the optimization without any need for a detailed design for the heat exchanger network(HEN) and the refrigeration system(RS). The method presented in the paper can dramatically reduce the scale and complexity of the problem. A case study of ethylene cold-end separation is used to illustrate the application of the approach. Compared with the original industrial scheme, the result is encouraging.

Comparisons of JOULE 1 rocket thermospheric wind observations in high latitudes with GITM simulations

4 Summary and conclusion The JOULE sounding rocket 1 experiment was carried out at Poker Flat Research Range in Alaska around 1200 UT on March 27th,2003 with two instrumented rockets and one chemical tracer rocket.From the released TMA trails,neutral wind measurements from approximately 85 to 160 km altitude showed a vertically propagating wave and a jet structure around 120 km altitude.Large shears appeared at the bottom side of the jet with Richardson numbers close to or smaller than the critical value of 0.25,which implies the possible existence of Kelvin-Helmholtz instabilities caused by the vertical shear in the fast flows.