Geochemical characteristics and exploration significance of ultra-deep Sinian oil and gas from Well Tashen 5,Tarim Basin,NW China

The Well Tashen 5(TS5),drilled and completed at a vertical depth of 9017 m in the Tabei Uplift of the Tarim Basin,NW China,is the deepest well in Asia.It has been producing both oil and gas from the Sinian at a depth of 8780e8840 m,also the deepest in Asia in terms of oil discovery.In this paper,the geochemical characteristics of Sinian oil and gas from the well were investigated and compared with those of Cambrian oil and gas discovered in the same basin.The oil samples,with Pr/Ph ratio of 0.78 and a whole oil carbon isotopic value of31.6‰,have geochemical characteristics similar to those of Ordovician oils from the No.1 fault in the North Shuntuoguole area(also named Shunbei area)and the Middle Cambrian oil from wells Zhongshen 1(ZS1)and Zhongshen 5(ZS5)of Tazhong Uplift.The maturity of light hydrocarbons,diamondoids and aromatic fractions all suggest an approximate maturity of 1.5%e1.7%Ro for the samples.The(4-+3-)methyldiamantane concentration of the samples is 113.5 mg/g,indicating intense cracking with a cracking degree of about 80%,which is consistent with the high bottom hole temperature(179℃).The Sinian gas samples are dry with a dryness coefficient of 0.97.The gas is a mixture of kerogen-cracking gas and oil-cracking gas and has Ro values ranging between 1.5%and 1.7%,and methane carbon isotopic values of41.6‰.Based on the equivalent vitrinite reflectance(R_(eqv)=1.51%e1.61%)and the thermal evolution of source rocks from the Cambrian Yu'ertusi Formation of the same well,it is proposed that the Sinian oil and gas be mainly sourced from the Cambrian Yu'ertusi Formation during the Himalayan period but probably also be joined by hydrocarbon of higher maturity that migrated from other source rocks in deeper formations.The discovery of Sinian oil and gas from Well TS5 suggests that the ancient ultra-deep strata in the northern Tarim Basin have the potential for finding volatile oil or condensate reservoirs.

Geometry and formation mechanism of tension gashes and their implication on the hydrocarbon accumulation in the deep-seated strata of sedimentary basin:A case from Shunnan area of Tarim Basin

With the theoretical and technological developments related to cratonic strike-slip faults,the Shuntuoguole Low Uplift in the Tarim Basin has attracted considerable attention recently.Affected by multi-stage tectonic movements,the strike-slip faults have controlled the distribution of hydrocarbon resources owing to the special fault characteristics and fault-related structures.In contrast,the kinematics and formation mechanism of strike-slip faults in buried sedimentary basins are difficult to investigate,limiting the discussion of these faults and hydrocarbon accumulation.In this study,we identified the characteristics of massive sigmoidal tension gashes(STGs)that formed in the Shunnan area of the Tarim Basin.High-resolution three-dimensional seismic data and attribute analyses were used to investigate their geometric and kinematic characteristics.Then,the stress state of each point of the STGs was calculated using seismic curvature attributes.Finally,the formation mechanism of the STGs and their roles in controlling hydrocarbon migration and accumulation were discussed.The results suggest that:(1)the STGs developed in the Shunnan area have a wide distribution,with a tensile fault arranged in an enéchelon pattern,showing an S-shaped bending.These STGs formed in multiple stages,and differential rotation occurred along the direction of strike-slip stress during formation.(2)Near the principal displacement zone of the strike-slip faults,the stress value of the STGs was higher,gradually decreasing at both ends.The shallow layer deformation was greater than the deep layer deformation.(3)STGs are critical for connecting source rocks,migrating oil and gas,sealing horizontally,and developing efficient reservoirs.This study not only provides seismic evidence for the formation and evolution of super large STGs,but also provides certain guidance for oil and gas exploration in this area.

Evolution and Application of Sealing Ability of Gypsum Caprocks under Temperature-Pressure Coupling:An Example of the ZS5 Well in the Tazhong Area of the Tarim Basin

Gypsum caprocks'sealing ability is affected by temperature-pressure coupling.Due to the limitations of experimental conditions,there is still a lack of triaxial stress-strain experiments that simultaneously consider changes in temperature and pressure conditions,which limits the accuracy of the comprehensive evaluation of the brittle plastic evolution and sealing ability of gypsum rocks using temperature pressure coupling.Triaxial stress-strain tests were utilized to investigate the differences in the evolution of the confinement capacity of gypsum rocks under coupled temperaturepressure action and isothermal-variable pressure action on the basis of sample feasibility analysis.According to research,the gypsum rock's peak and residual strengths decrease under simultaneous increases in temperature and pressure over isothermal pressurization experimental conditions,and it becomes more ductile.This reduces the amount of time it takes for the rock to transition from brittle to plastic.When temperature is taken into account,both the brittle–plastic transformation's depth limit and the lithological transformation of gypsum rocks become shallower,and the evolution of gypsum rocks under variable temperature and pressure conditions is more complicated than that under isothermal pressurization.The sealing ability under the temperature-pressure coupling is more in line with the actual geological context when the application results of the Well#ZS5 are compared.This provides a theoretical basis for precisely determining the process of hydrocarbon accumulation and explains why the early hydrocarbon were not well preserved.

Quantitative prediction model for the depth limit of oil accumulation in the deep carbonate rocks:A case study of Lower Ordovician in Tazhong area of Tarim Basin

With continuous hydrocarbon exploration extending to deeper basins,the deepest industrial oil accumulation was discovered below 8,200 m,revealing a new exploration field.Hence,the extent to which oil exploration can be extended,and the prediction of the depth limit of oil accumulation(DLOA),are issues that have attracted significant attention in petroleum geology.Since it is difficult to characterize the evolution of the physical properties of the marine carbonate reservoir with burial depth,and the deepest drilling still cannot reach the DLOA.Hence,the DLOA cannot be predicted by directly establishing the relationship between the ratio of drilling to the dry layer and the depth.In this study,by establishing the relationships between the porosity and the depth and dry layer ratio of the carbonate reservoir,the relationships between the depth and dry layer ratio were obtained collectively.The depth corresponding to a dry layer ratio of 100%is the DLOA.Based on this,a quantitative prediction model for the DLOA was finally built.The results indicate that the porosity of the carbonate reservoir,Lower Ordovician in Tazhong area of Tarim Basin,tends to decrease with burial depth,and manifests as an overall low porosity reservoir in deep layer.The critical porosity of the DLOA was 1.8%,which is the critical geological condition corresponding to a 100%dry layer ratio encountered in the reservoir.The depth of the DLOA was 9,000 m.This study provides a new method for DLOA prediction that is beneficial for a deeper understanding of oil accumulation,and is of great importance for scientific guidance on deep oil drilling.

The Lower Cambrian Xiaoerbulake Formation in the Tarim Basin as a potential carbonate source rock

The oil and gas exploration of the Middle and Lower Cambrian in the Tarim Basin reveals widely distributed source rocks with the Yuertusi Formation being recognized as high-quality source rocks that are distributed in a rather small range.The Xiaoerbulake Formation that is right under the Yuertusi Formation has also been eyed as potential high-quality source rocks and is studied through analyses focusing on the stratigraphic development,the abundance,type,and maturity of organic matter,and the paleoproductivity of a dark-colored algae dolomite within the formation.The results show that the dolomite is rich in organic matter of mainly types Ⅰ and Ⅱ kerogens.Although reached the high mature to over-mature stage,the dolomite was deposited in an anoxic sedimentary environment featuring a high paleoproductivity level and a high organic carbon burial efficiency,quite favorable for the development of high-quality source rocks.The study provides material evidence to the Middle-Lower Cambrian subsalt source rock-reservoir-caprock combination model for the Tarim Basin.

The Middle and Lower Cambrian salt tectonics in the central Tarim Basin,China:A case study based on strike-slip fault characterization

Due to the considerable depth of the salt layers and the lack of calibration by exploratory drilling,the interpretation of the Middle and Lower Cambrian salt formations in the central Tarim Basin poses a challenge.In this paper,we apply the coupling and decoupling deformation theory in salt tectonics to analyze the No.7 fault mapped in the seismic datasets by the response characteristics of the Middle and Lower Cambrian layers.By quantifying the stratigraphic framework of the Middle and Lower Cambrian strata,we define the position of the salt layer with the seismic data.Structural decoupling is observed in the Middle and Lower Cambrian sequences in the Shuntuoguole Low Uplift,while deformation coupling is observed in these two sequences in the Shaya Uplift.

Effect of CO_(2)flooding in an oil reservoir with strong bottom-water drive in the Tahe Oilfield,Tarim Basin,Northwest China

The dissolution and diffusion of CO_(2)in oil and water and its displacement mechanism were investigated by laboratory experiment and numerical simulation for Block 9 in the Tahe oilfield,a sandstone oil reservoir with strong bottom-water drive in Tarim Basin,Northwest China.Such parameters were analyzed as solubility ratio of CO_(2)in oil,gas and water,interfacial tension,in-situ oil viscosity distribution,remaining oil saturation distribution,and oil compositions.The results show that CO_(2)flooding could control water coning and increase oil production.In the early stage of the injection process,CO_(2)expanded vertically due to gravity differentiation,and extended laterally under the action of strong bottom water in the intermediate and late stages.The CO_(2)got enriched and extended at the oil-water interface,forming a high interfacial tension zone,which inhibited the coning of bottom water to some extent.A miscible region with low interfacial tension formed at the gas injection front,which reduced the in-situ oil viscosity by about 50%.The numerical simulation results show that enhanced oil recovery(EOR)is estimated at 5.72%and the oil exchange ratio of CO_(2)is 0.17 t/t.

A Structural Interpretation Model and Restoration of the Mesozoic Proto-basin for the Kuqa Depression,Tarim Basin

A thrust-fold belt consisting of a series of thrusts and buckling folds developed in the Mesozoic and Cenozoic strata within the Kuqa Depression,Tarim Basin.In this study,a structural interpretation model of the Kuqa Depression is established and the Mesozoic proto-basin is reconstructed on the basis of outcrop geology along the basin margin,seismic,well-log and CEMP data.The model is called‘delaminate contractional deformation',which emphasizes the decoupling between the Cenozoic,Mesozoic,pre-Mesozoic and the basin-basement within the Kuqa Depression,but there is no unified detachment.The model has a shortening amount ranging from 12 km to 16 km and the depth involved in contractional deformation ranges from 21 km to 28 km.A prototype of the Mesozoic basin reconstructed by interpretation model is a subbasin superposed on the transitional zone between the uplift at the northern edge of the Tarim Craton and the southern Tianshan orogenic wedge formed in the Hercynian orogeny.Lithospheric thermal and crustal isostatic activity after the Hercynian orogeny maybe the controlling dynamic factors of basin subsidence during the Mesozoic and early Cenozoic,the difference in rock mechanical properties between different levels,craton and orogenic wedge being the major cause of the‘delaminate contractional deformation'during the Himalayan orogeny.

Quantitatively unmixing method for complex mixed oil based on its fractions carbon isotopes: A case from the Tarim Basin, NW China

Deep mixed oils with secondary alterations have been widely discovered in the Tarim Basin,but current methods based on biomarkers and isotopes to de-convolute mixed oil cannot calculate the exact mixing proportion of different end-member oils,which has seriously hindered further exploration of deep hydrocarbons in the study area.To solve this problem,we constructed a novel method based on the carbon isotope(δ13C)of the group components to de-convolute mixed liquid hydrocarbons under the material balance principle.The results showed that the mixed oil in the Tazhong Uplift was dominantly contributed at an average proportion of 68% by an oil end-member with heavier d13C that was believed to be generated from the Cambrian-Lower Ordovician source rocks,whereas the mixed oil in the Tabei Uplift was predominantly contributed at an average proportion of 61% by an oil end-member with lighter d13C that was believed to be generated from the Middle-Upper Ordovician source rocks.This indicates that,on the basis of the detailed description of the distribution of effective source rocks,the proposed method will be helpful in realizing differential exploration and further improving the efficiency of deep liquid hydrocarbon exploration in the Tarim Basin.In addition,compared to traditional δ13C methods for whole oil and individual n-alkanes in de-convoluted mixed oil,the proposed method has a wider range of applications,including for mixed oils with variations in color and density,indicating potential for promoting the exploration of deep complex mixed oils in the Tarim Basin and even around the world.

Environmental Effects on Differential Organic Matter Enrichment of the Lower Cambrian Shale,Tarim Basin,NW China

Early Cambrian shale is an important petroleum source rock around the world.Because of little drilling data and poor seismic data,until recently,organic matter enrichment of the Lower Cambrian Yuertusi and Xishanbulake formations shale is still an enigma in the Tarim Basin,northwestern China.Total organic carbon(TOC),major and trace element data of Cambrian shale samples from five boreholes have been analyzed to decipher the mechanism of the organic matter enrichment.The results show that the shales deposited in the western restricted intraplatform have much higher TOC contents(3.2%-19.8%,on average 11.0%)than those from the eastern basin(2.2%-10.2%,on average 4.5%).The paleoproductivity proxies(Ba,Ba/Al,P/Al)in the western restricted platform are much higher than those in the eastern basin.The trace element indicators such as V/Cr,Ni/Co,Mo-TOC and Mo_(EF)-U_(EF)suggest an anoxic environment across the basin,but a more restricted environment in the western intraplatform.The paleoproductivity rather than anoxic condition and hydrothermal activity are concluded to have resulted in the differentiation of the organic matter enrichment from the western intraplatform to eastern basin in the early Cambrian shales;the restricted environment was favorable for paleoproductivity and preservation of organic matter.

Surface Processes Driving Intracontinental Basin Subsidence in the Context of India–Eurasia Collision:Evidence from Flexural Subsidence Modeling of the Cenozoic Southern Tarim Basin along the West Kunlun Foreland,NW Tibetan Plateau

The India–Eurasia collision has produced a number of Cenozoic deep intracontinental basins,which bear important information for revealing the far-afield responses to the remote collision.Despite their significance,their subsiding mechanism remains the subject of debate,with end-member models attributing it to either orogenic or sedimentary load.In this study,we conduct flexural subsidence modeling with a two-dimensional finite elastic plate model on the Hotan-Mazatagh section along the southern Tarim Basin,which defines a key region in the foreland of the West Kunlun Orogen,along the NW margin of the Tibetan Plateau.The modeling results indicate that the orogenic load of West Kunlun triggers the southern Tarim Basin to subside by up to less than ~6 km,with its impact weakening towards the basin interiors until ~230 km north from the Karakax fault.The sedimentary load,consisting of Cenozoic strata,forces the basin to subside by ~2 to~7 km.In combination with the retreat of the proto-Paratethys Sea and the paleogeographic reorganization of the Tarim Basin,we propose that surface processes,in particular a shift from an exorheic to an endorheic drainage system associated with the consequent thick sedimentary load,played a decisive role in forming deep intracontinental basins in the context of the India-Eurasia collision.

Driving forces and their relative contributions to hydrocarbon expulsion from deep source rocks: A case of the Cambrian source rocks in the Tarim Basin

To thoroughly understand the dynamic mechanism of hydrocarbon expulsion from deep source rocks,in this study,five types of hydrocarbon expulsion dynamics(thermal expansion,hydrocarbon diffusion,compaction,product volume expansion,and capillary pressure difference(CPD))are studied.A model is proposed herein to evaluate the relative contribution of different dynamics for hydrocarbon expulsion using the principle of mass balance,and the model has been applied to the Cambrian source rocks in the Tarim Basin.The evaluation results show that during hydrocarbon expulsion from the source rocks,the relative contribution of CPD is the largest(>50%),followed by compaction(10%-40%),product volume expansion(5%-30%),and thermal expansion(2%-20%).The relative contribution of diffusion to hydrocarbon expulsion is minimal(<10%).These results demonstrate that CPD plays an important role in the hydrocarbon expulsion process of deep source rocks.The hydrocarbon expulsion process of source rocks can be categorized into three stages based on the contribution of different dynamics to the process:the first stage is dominated by compaction and diffusion to expel hydrocarbons,the second stage is dominated by product volume expansion and CPD,and the third stage is dominated by product volume expansion and CPD.This research offers new insights into hydrocarbon exploration in tight oil and gas reservoirs.

Origin of gas condensate reservoir in Fuman Oilfield, Tarim Basin, NW China

To understand the reservoir property and hydrocarbon accumulation conditions of the Middle and Upper Ordovician intraplatform shoal between ultra-deep main strike-slip faults in Fuman Oilfield of the Tarim Basin, China, the main strike-slip faults in and around well FD1 in the basin were analyzed in terms of sedimentary facies, sequence stratigraphy, intraplatform shoal reservoir property, and oil and gas origins, based on drilling data. The Yingshan Formation intraplatform shoal between the main strike-slip faults is superimposed with low-order faults to form a new type of hydrocarbon play. Firstly, hydrocarbons generated from the Lower Cambrian Yuertusi Formation source rocks vertically migrated into the second member of Yingshan Formation through the main strike-slip faults, and then migrated laterally until they were accumulated. A small amount of oil from Well FD1 came from the Yuertusi Formation source rocks in the mature stage, and a large amount of gas originated from oil cracking in the ultra-deep reservoirs. Therefore, the secondary gas condensate reservoir in Well FD1 is characterized by high gas to oil ratio, dry gas (dryness coefficient being 0.970) and hybrid origin. This new type of hydrocarbon play characterized by intraplatform shoal and low-order fault suggests a prospect of continuous hydrocarbon-bearing area in Fuman Oilfield, which will expand the ultrap-deep oil and gas exploration in the oilfield.

Migration of paleo-uplift in southwestern Tarim Basin and its implications for orogenesis and reservoir development, NW China

Based on well horizon calibration,the typical seismic profiles in southwestern Tarim Basin were interpreted systematically,regional geological sections were established,and the regional denudation thickness of each tectonic period was restored.On this basis,the plane morphology maps of ancient structures of the Cambrian pre-salt dolomites in different periods were compiled,and the spatial distribution,development,evolution and migration of paleo-uplift in the late Early Paleozoic were analyzed.In the late Early Paleozoic,there existed a unified regional paleo-uplift widely distributed in southwestern Tarim Basin,which is called the southwestern Tarim plaeo-uplift.The“Tarim SW paleo-uplift”and“Hetian paleo-uplift”proposed in previous literatures are not independent,but the result of the spatio-temporal migration and evolution of the southwestern Tarim paleo-uplift identified in this paper.The southwestern Tarim paleo-uplift emerged at the end of Middle Ordovician,and took its initial shape with increased amplitude in the Late Ordovician.During the Silurian,the southwestern Tarim paleo-uplift rose steadily and expanded rapidly to the east,incorporating Pishan-Hetian and other areas,with the structural high locating in the Pishan-Hetian area.During the Devonian,the southwestern Tarim paleo-uplift began to shrink gradually,to a limited range in the Pishan-Hetian area in the southern part of the basin.During the Carboniferous,the southwestern Tarim paleo-uplift became an underwater uplift,that is,the paleo-uplift gradually died out.The southwestern Tarim paleo-uplift belongs to the forebulge of the southwestern Tarim foreland basin in the late Early Paleozoic,and its formation and evolution are related to the early Paleozoic orogeny of the West Kunlun orogenic belt in the south of the Tarim Basin.The migration of the southwestern Tarim paleo-uplift from the northwestern part of the southwestern Tarim Basin to the Pishan-Hetian area indicates the early Paleozoic orogenic process of the West Kunlun orogenic belt,which started in the western section at the end of Middle Ordovician and extended from west to east in a“scissor”style.The migration and evolution of the southwestern Tarim paleo-uplift controlled the development of unconformities at the end of Middle Ordovician,the end of Late Ordovician,and the end of Middle Devonian,and the spatial distribution of dissolved fracture-cave reservoirs in weathered crust below the unconformities in the southwest of Tarim Basin.The migration of the structural high of the southwestern Tarim paleo-uplift also played an important role in controlling the development of dissolved fracture-cave reservoirs in weathered crust.

Factors controlling the development of carbonate reservoirs of Ordovician Yingshan formation in the Gucheng area, Tarim Basin

Deep carbonate rocks are important targets for oil and gas exploration in China. In recent years, significant oil/gas discoveries have been made in the deep carbonate sequences in the Tarim, Sichuan, Ordos, and Bohai Bay basins. Despite significant oil/gas discoveries, large-scale exploration has not been conducted in the Gucheng area in the Tarim Basin. To break the bottleneck restricting the petroleum exploration in the Gucheng area, this study analyzed the factors controlling the formation of carbonate reservoirs of the Yingshan Formation in the Gucheng area in detail based on the basic geological conditions of the study area and the data from cores, thin sections, well logging, testing, and 3-D seismic survey. The inner shallow-ramp in the Gucheng area acts as the main sedimentary facies zone for the development of high-quality reservoirs. The grainstones formed in the high-energy environment of the inner shallow-ramp laid the foundation for subsequent reservoir development in the study area. The dolomitized shoal grainstones in the inner shallow-ramp have well-developed intercrystalline pores and intercrystalline dissolved pores due to later dolomitization, thus serving as high-quality reservoirs. Strike-slip faults are crucial to reservoir reformation and determine whether high production can be achieved in oil and gas exploitation in the study area. Moreover, later reformation by hydrothermal solutions also plays a constructive role in reservoir formation.

Application of Prediction Techniques in Carbonate Karst Reservoir in Tarim Basin

Carbonate karst reservoir is the emphases of Tarim＇s carbonate exploration. However, it is buried at a large depth, which results in Weak seismic reflection signal and low S/N ratio. In addition, the karst reservoir contains great heterogeneity, so reservoir prediction is very difficult. Through many years of research and exploration, we have established a suite of comprehensive evaluation technology for carbonate karst reservoir using geophysical characteristics and a geological concept model, including a technique for reconstructing the paleogeomorphology of buried hills based on a sequence framework, seismic description of the karst reservoir, and strain variant analysis for fracture estimation. The evaluation technology has been successfully applied in the Tabei and Tazhong areas, and commercial production of oil and gas has been achieved. We show the application of this technology in the Lunguxi area in North Tarim in this paper.

Petroleum Accumulation Associated with Volcanic Activity in the Tarim Basin —— Taking Tazhong-47 Oilfield as an Example

The discovery of the Tazhong-47 oilfield confirmed that it is realistic to explore oil and gas fields around igneous rocks in the Tarim basin. The favorable conditions for petroleum accumulation due to volcanic activity and igneous rocks formed during the activity show in two aspects. A) The contact surface of igneous rocks and the surrounding sedimentary rocks, like a vertical unconformity surface, formed the conduit of petroleum migration. Petroleum would accumulate once it encountered a trap in which the reservoir had fine porosity and permeability. B) It formed a trap barriered by igneous rocks, or changed or cut the original trap. In addition, volcanic rocks are a kind of potential reservoir, there are many such examples in the world, and oil also shows in the Permian igneous rocks in well Zhong-1 on Tazhong uplift. Petroleum accumulation associated with volcanic activity will be a new exploring field in the Tarim basin.

The Impact of the Linked Factors of Provenance,Tectonics and Climate on Potash Formation:An Example from the Potash Deposits of Lop Nur Depression in Tarim Basin,Xinjiang,Western China

Potash deposits commonly accumulate in highly restricted settings at the final stage of brine evaporation. This does not mean that potash deposits are formed simply as a result of the evaporation concentration of seawater or lake water, but rather as a coupling result of particular provenance, tectonics and climate activities. In this paper, we focus on the formative mechanism of the potash deposits of Lop Nur depression in Tarim Basin to interpret the detailed coupling mechanism among provenance, tectonics and climate. In terms of the provenance of Lop Nur Lake, the water of the Tarim River which displays ＂potassium-rich＂ characteristics play an important role. In addition, the Pliocene and Lower-Middle Pleistocene clastic beds surrounding Lop Nur Lake host a certain amount of soluble potassium and thus serves as ＂source beds＂ for potash formation. During the late Pliocene, the Lop Nur region has declined and evolved into a great lake from the previous piedmont and diluvial fan area. Since the mid Pleistocene, the great-united Lop Nur Lake has been separated and has generated a chain system consisting of Taitema Lake, Big Ear Lake and Luobei Lake which has turned into the deepest sag in Lop Nur Lake. Dry climate in Lop Nur region has increased since the Pliocene, and became extreme at the late Pleistocene. The study implies that potash formation in Lop Nur Lake depends on the optimal combination of extreme components of provenance, tectonics and climate during a shorter-term period. The optimal patterns of three factors are generally characterized by the long-term accumulation and preliminary enrichment of potassium, the occurrence of the deepest sub-depression and the appearance of an extremely arid climate in Lop Nur region. These factors have been interacting synergistically since the forming of the saline lake and in the later stages strong ＂vapor extraction＂ caused by extremely arid climate is needed to trigger large scale mineralization of potash deposits.

Diagenesis and Its Effect on Reservoir Quality of Silurian Sandstones,Tabei Area,Tarim Basin,China

The diagenetic processes of the Tabei sandstones in the Tarim Basin include compaction, cementation （quartz overgrowths, calcite, clay minerals and a minor amount of pyrite）, and dissolution of the feldspar and calcite cement. Porosity was reduced by compaction from an assumed original 40% to about 22.1%. Cementation reduced porosity to 26.6%. The Tabei sandstones lost a little more porosity by compaction than by cementation. Quartz cementation, especially syntaxial quartz overgrowth, is a major cause of porosity-loss in many reservoirs in moderately to deeply buried sandstone. Calcite cementation played a key role in the porosity evolution of sandstones. At the early stage of burial, the early calcite cement occupied most of the pore spaces resulting in significant porosity. On the other hand, some primary porosity has been preserved due to incomplete filling or the presence of scattered patches of calcite cement. In addition to calcite, several clay minerals, including illite and chlorite occurred as pore-filling and pore-lining cements. The pore-lining chlorite may have helped in retaining the porosity by preventing the precipitation of syntaxial quartz overgrowths. Illite, which largely occurred as hair-like rims around the grains and bridges on the pore throats, caused a substantial deterioration of penetrability of the reservoir. Calcite cement dissolution was extensive and contributed significantly to the development of secondary porosity.

Petroleum Migration Direction of the Silurian Paleo-pools in the Tarim Basin, Northwest China

The results obtained in this paper indicate that carbazole-type compounds have high thermal stability and also show stability in oxidation and bio-degradation. This kind of compounds still has a high concentration and complete distribution in the analyzed dry asphalt samples, showing that they are particularly useful in studying petroleum migration of paleo-pool. During the basin＇s first-stage of oil-gas pool formation in the Silurian in Tazhong and Tabei areas of Tarim Basin （at the end of Silurian period） and the second-stage in the Awati area （in Permian）, the petroleum experienced a long-distance migration. During the formation of the Silurian paleo-pools in Tazhong Uplift at the end of Silurian, the petroleum mainly came from the lower and middle Cambrian source rocks in the Manjiaer sag. The petroleum migrated towards the southwest-south entering the Silurian reservoir beds in Tazhong first. Then, it further migrated within Silurian from northwest to southeast along the highs of the Structural Belts to the region of the Silurian pinchout boundary in Tazhong. In Tabei Uplift, during the first-stage of pool formation, the petroleum was also from the lower and middle Cambrian source rocks in the Manjiaer sag. It migrated northwest entering the Silurian reservoir beds in the Tabei Uplift firstly, and then the migration continued in the same direction within the Silurian reservoirs and finally the petroleum was trapped in higher positions. During the second-stage pool formation in the Silurian beds in the areas around Awati sag, the petroleum mainly came from the lower-middle Cambrian source rocks in the Awati sag. The petroleum migrated from the generation center to Silurian reservoirs in all directions around the sag through major paths, and the petroleum was finally trapped in higher locations.