The nonwoven composites have sandwich structure, with the first and third layers being nonwovens and the middle layer of woven fabric. On the basis of tests of the single rip tearing strength and drawing out resistanc...The nonwoven composites have sandwich structure, with the first and third layers being nonwovens and the middle layer of woven fabric. On the basis of tests of the single rip tearing strength and drawing out resistances of both the nonwoven composites and the woven fabric, the single rip tearing failure mechanism of the composites were analyzed.Then theoretical calculation model for the single rip tearing strength was established, which indicates that the breaking strength of warp and weft yarns in the nonwoven composites, the density of warp and weft yarns and drawing out resistances are the main influencing factors. In the end,experimental verification was made, which shows that theoretical values conform to the measured values well.展开更多
Day by day, the demand and popularity of denim have increased. With the increase in demand for denim, washing has also increased. When we washed a piece of denim fabric, then its properties also changed. The propertie...Day by day, the demand and popularity of denim have increased. With the increase in demand for denim, washing has also increased. When we washed a piece of denim fabric, then its properties also changed. The properties are tensile strength, GSM, color fading, stiffness, abrasion resistance, moisture regain, etc. In this study, we conduct different washing processes on denim fabric such are Stonewash, Caustic wash, Acid wash, Normal wash, Pigment wash, Sandblasting, and Super whitewash. After washing, the properties of denim fabric have been analyzed especially strength. The tear and tensile strength were measured by ISO standard. From the above washing method, Normal & pigment wash showed good strength properties comparing with others.展开更多
In this paper,an equation expressing relationship between trapezoid tear strength and fabrictensile properties,weave texture and geomitry of specimen was studied.It could be used to predicttrapezoid tear strength for ...In this paper,an equation expressing relationship between trapezoid tear strength and fabrictensile properties,weave texture and geomitry of specimen was studied.It could be used to predicttrapezoid tear strength for uncoated fabrics well,and also for coated fabrics if multipling a stressconcentration coefficient.The four tear test standard methods(single-rip,double-rip,wing-ripand trapezoid tear)have been adopted to measure the tear strength of fifteen coated fabrics whichwere used for architecture and gencral industrial purposes and the nine corresponding uncoatedfabrics respectively.Analysis and comparison of experimental results showed that there are an ex-cellent correlation between each two methods with the four tear parameters respectively and a goodconsistency of the order of the tear strength for different samples.In addition,the experimental results showed that a good correlation exists between the tenslieproperties and tear strength of coated and uncoated fabrics.展开更多
The specification of laid-in and warp yams,thedensity of fabric and the specification of groundyam are of great importance when the bi-axialwarp knitted fabric being knitted.In this paper,the tearing property of the r...The specification of laid-in and warp yams,thedensity of fabric and the specification of groundyam are of great importance when the bi-axialwarp knitted fabric being knitted.In this paper,the tearing property of the reinforced plastic filmwith bi-axial warp knitted fabric skeleton istested and analyzed.The resuits show thatamong the three factors,the specification of laid-in and warp yam has the greatest influence onthe tearing strength of the reinforced plastic film,while the rest of them has secondary and lesseffect respectively,and there is exponential re-lation between the tearing strength of the rein-forced plastic film and the number of yams in thedirection of force.展开更多
With the increasingly widespread application of rubber in many fields,there is a growing demand for quantitative characterization of temperature-dependent mechanical properties in high-temperature service environments...With the increasingly widespread application of rubber in many fields,there is a growing demand for quantitative characterization of temperature-dependent mechanical properties in high-temperature service environments.The critical tearing energy is an important criterion for determining whether rubber materials will experience tearing instability,while tear strength is a key parameter for rubber materials to resist tearing.It is necessary to quantitatively characterize their evolution with temperature.Current theoretical research mainly relies on fitting a large amount of experimental data,which is not convenient for engineering applications.Therefore,in this work,a temperature-dependent critical tearing energy model is firstly developed based on the force-heat equivalence energy density principle.This model considers the equivalent relationship between the critical tearing energy required for crack instability propagation and the thermal energy stored in the rubber material.It is demonstrated that our model has higher prediction accuracy when compared to other models.Furthermore,combining with the Griffith fracture theory,temperature-dependent tear strength models applicable to three different crack modes are separately established.These models are validated using experimental data for Mode I opening cracks and ModeⅢtearing cracks,and good consistency is achieved.Additionally,a quantitative analysis of the influence of elastic modulus on tear strength at different temperatures is conducted.This work provides a reliable way for predicting temperature-dependent tearing instability behavior and offers beneficial suggestions for improving the tear strength of rubber materials at different temperatures.展开更多
文摘The nonwoven composites have sandwich structure, with the first and third layers being nonwovens and the middle layer of woven fabric. On the basis of tests of the single rip tearing strength and drawing out resistances of both the nonwoven composites and the woven fabric, the single rip tearing failure mechanism of the composites were analyzed.Then theoretical calculation model for the single rip tearing strength was established, which indicates that the breaking strength of warp and weft yarns in the nonwoven composites, the density of warp and weft yarns and drawing out resistances are the main influencing factors. In the end,experimental verification was made, which shows that theoretical values conform to the measured values well.
文摘Day by day, the demand and popularity of denim have increased. With the increase in demand for denim, washing has also increased. When we washed a piece of denim fabric, then its properties also changed. The properties are tensile strength, GSM, color fading, stiffness, abrasion resistance, moisture regain, etc. In this study, we conduct different washing processes on denim fabric such are Stonewash, Caustic wash, Acid wash, Normal wash, Pigment wash, Sandblasting, and Super whitewash. After washing, the properties of denim fabric have been analyzed especially strength. The tear and tensile strength were measured by ISO standard. From the above washing method, Normal & pigment wash showed good strength properties comparing with others.
文摘In this paper,an equation expressing relationship between trapezoid tear strength and fabrictensile properties,weave texture and geomitry of specimen was studied.It could be used to predicttrapezoid tear strength for uncoated fabrics well,and also for coated fabrics if multipling a stressconcentration coefficient.The four tear test standard methods(single-rip,double-rip,wing-ripand trapezoid tear)have been adopted to measure the tear strength of fifteen coated fabrics whichwere used for architecture and gencral industrial purposes and the nine corresponding uncoatedfabrics respectively.Analysis and comparison of experimental results showed that there are an ex-cellent correlation between each two methods with the four tear parameters respectively and a goodconsistency of the order of the tear strength for different samples.In addition,the experimental results showed that a good correlation exists between the tenslieproperties and tear strength of coated and uncoated fabrics.
文摘The specification of laid-in and warp yams,thedensity of fabric and the specification of groundyam are of great importance when the bi-axialwarp knitted fabric being knitted.In this paper,the tearing property of the reinforced plastic filmwith bi-axial warp knitted fabric skeleton istested and analyzed.The resuits show thatamong the three factors,the specification of laid-in and warp yam has the greatest influence onthe tearing strength of the reinforced plastic film,while the rest of them has secondary and lesseffect respectively,and there is exponential re-lation between the tearing strength of the rein-forced plastic film and the number of yams in thedirection of force.
基金the National Natural Science Foundation of China(12172069)the Graduate Scientific Research and Innovation Foundation of Chongqing(CYS23078)for their support in this research.
文摘With the increasingly widespread application of rubber in many fields,there is a growing demand for quantitative characterization of temperature-dependent mechanical properties in high-temperature service environments.The critical tearing energy is an important criterion for determining whether rubber materials will experience tearing instability,while tear strength is a key parameter for rubber materials to resist tearing.It is necessary to quantitatively characterize their evolution with temperature.Current theoretical research mainly relies on fitting a large amount of experimental data,which is not convenient for engineering applications.Therefore,in this work,a temperature-dependent critical tearing energy model is firstly developed based on the force-heat equivalence energy density principle.This model considers the equivalent relationship between the critical tearing energy required for crack instability propagation and the thermal energy stored in the rubber material.It is demonstrated that our model has higher prediction accuracy when compared to other models.Furthermore,combining with the Griffith fracture theory,temperature-dependent tear strength models applicable to three different crack modes are separately established.These models are validated using experimental data for Mode I opening cracks and ModeⅢtearing cracks,and good consistency is achieved.Additionally,a quantitative analysis of the influence of elastic modulus on tear strength at different temperatures is conducted.This work provides a reliable way for predicting temperature-dependent tearing instability behavior and offers beneficial suggestions for improving the tear strength of rubber materials at different temperatures.
