Assessing Suitability of Rural Settlements Using an Improved Technique for Order Preference by Similarity to Ideal Solution

Land suitability assessment is a prerequisite phase in land use planning; it guides toward optimal land use by providing information on the opportunities and constraints involved in the use of a given land area. A geographic information system-based procedure, known as rural settlement suitability evaluation(RSSE) using an improved technique for order preference by similarity to ideal solution(TOPSIS), was adopted to determine the most suitable area for constructing rural settlements in different geographical locations. Given the distribution and independence of rural settlements, a distinctive evaluation criteria system that differed from that of urban suitability was established by considering the level of rural infrastructure services as well as living and working conditions. The unpredictable mutual interference among evaluation factors has been found in practical works. An improved TOPSIS using Mahalanobis distance was applied to solve the unpredictable correlation among the criteria in a suitability evaluation. Uncertainty and sensitivity analyses obtained via Monte Carlo simulation were performed to examine the robustness of the model. Daye, a resource-based city with rapid economic development, unsatisfied rural development, and geological environmental problems caused by mining, was used as a case study. Results indicate the following findings: 1) The RSSE model using the improved TOPSIS can assess the suitability of rural settlements, and the suitability maps generated using the improved TOPSIS have higher information density than those generated using traditional TOPSIS. The robustness of the model is improved, and the uncertainty is reduced in the suitability results. 2) Highly suitable land is mainly distributed in the northeast of the study area, and the majority of which is cultivated land, thereby leading to tremendous pressure on the loss of cultivated land. 3) Lastly, 12.54% of the constructive expansion permitted zone and 8.36% of the constructive expansion conditionally permitted zone are situated in an unsuitable area, which indicates that the general planning of Daye lacks the necessary verification of suitability evaluation. Guidance is provided on the development strategy of rural settlement patches to support decision making in general land use planning.

Research on Network Maintenance Strategy Selection Based on Analytic Hierarchy Process and Technique for Order Preference by Similarity to Ideal Solution Algorithm

Network maintenance strategy selection is a multi-objective decision making topic. It mostly depends on the uncertainty and fuzziness of decision makers and conditions. In this paper, based on analytic hierarchy process(AHP) and technique for order preference by similarity to ideal solution(TOPSIS), TOPSIS partial order method is proposed to choose the optimal maintenance strategy. This method uses AHP to determine the weights of evaluation indexes. The optimal maintenance strategy choice is given as an example to demonstrate the effectiveness of the method.

A Decision Support System for Selection of Solar Power Plant Locations by Applying Fuzzy AHP and TOPSIS: An Empirical Study

The objective of this research is to propose a decision support system for avoiding flood on solar power plant site selection. Methodologically, the geographic information system (GIS) is used to determine the optimum site for a solar power plant. It is intended to integrate the qualitative and quantitative variables based upon the adoption of the Fuzzy Analytic Hierarchy Process (Fuzzy AHP) and the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) model. These methods are employed to unite the environmental aspects and social needs for electrical power systematically. Regarding a case study of the choice of a solar power plant site in Thailand, it demonstrates that the quantitative and qualitative criteria should be realized prior to analysis in the Fuzzy AHP-TOPSIS model. The fuzzy AHP is employed to determine the weights of qualitative and quantitative criteria that can affect the selection process. The adoption of the fuzzy AHP is aimed to model the linguistic unclear, ambiguous, and incomplete knowledge. Additionally, TOPSIS, which is a ranking multi-criteria decision making method, is employed to rank the alternative sites based upon overall efficiency. The contribution of this paper lies in the evolution of a new approach that is flexible and practical to the decision maker, in providing the guidelines for the solar power plant site choices under stakeholder needs: at the same time, the desirable functions are achieved, in avoiding flood, reducing cost, time and causing less environmental impact. The new approach is assessed in the empirical study during major flooding in Thailand during the fourth quarter of 2011 to 2012. The result analysis and sensitivity analysis are also presented.

Vertical Handover Decision for Mobile IoT Edge Gateway Using Multi-Criteria and Fuzzy Logic Techniques

Internet of Things (IoT) is ubiquitous, including objects or devices communicating through heterogenous wireless networks. One of the major challenges in mobile IoT is an efficient vertical handover decision (VHD) technique between heterogenous networks for seamless connectivity with constrained resources. The conventional VHD approach is mainly based on received signal strength (RSS). The approach is inefficient for vertical handover, since it always selects the target network with the strongest signal without taking into consideration of factors such as quality of service (QoS), cost, delay, etc. In this paper, we present a hybrid approach by integrating the multi-cri- teria based VHD (MCVHD) technique and an algorithm based on fuzzy logic for efficient VHD among Wi-Fi, Radio and Satellite networks. The MCVHD provides a lightweight solution that aims to achieving seamless connectivity for mobile IoT Edge Gateway over a set of heterogeneous networks. The proposed solution is evaluated in real time using a testbed containing real IoT devices. Further, the testbed is integrated with lightweight and efficient software techniques, e.g., microservices, containers, broker, and Edge/Cloud techniques. The experimental results show that the proposed approach is suitable for an IoT environment and it outperforms the conventional RSS Quality based VHD by minimizing handover failures, unnecessary handovers, handover time and cost of service.

Ranking approach of cross-efficiency based on improved TOPSIS technique

The cross-efficiency evaluation method is reviewed which is developed as a data envelopment analysis （DEA） extensive tool. The cross-efficiency evaluation method is utilized to identify the decision making unit （DMU） with the best practice and to rank the DMUs by their respective cross-efficiency scores. The main drawbacks of the cross-efficiency evaluation method when the ultimate average cross-efficiency scores are used to evalu- ate and rank the DMUs are also pointed out. With the research gap, an improved technique for order preference by similarity to ideal solution （TOPSIS） is introduced to rank the crossfficiency by eliminating the average assumption. Finally, an empirical example is illustrated to examine the validity of the proposed method.

Combining TOPSIS and GRA for supplier selection problem with interval numbers

Supplier selection can be regarded as a typical multiple attribute decision-making problem. In real-world situation, the values of the alternative attributes and their weights are always being nondeterministic, and as a result of this, the values are considered interval numbers. In addition, the common approach to measure the similarity between alternatives through their distance suffers from some minor shortcomings. To address these problems, this study develops a novel hybrid decision-making method by combining the technique for order preference by similarity to an ideal solution （TOPSIS） with grey relational analysis （GRA） for supplier selection with interval numbers. By introducing the intervals theory, the extensions of Euclidean distance and grey relational grade are defined. And then a new comprehensive closeness coefficient is constituted for supplier alternatives evaluation based on the interval Euclidean distance and the interval grey relational grade, which could indicate the distance-based similarity and the shape-based similarity simultaneously. A mtmerical example is taken to validate the flexibility of the proposed method, and result shows that this method can tackle the uncertainty in real-world supplier selection and also help decision makers to effectively select optimal suppliers.

Weakness Ranking Method for Subsystems of Heavy-Duty Machine Tools Based on FMECA Information

Heavy-duty machine tools are composed of many subsystems with different functions,and their reliability is governed by the reliabilities of these subsystems.It is important to rank the weaknesses of subsystems and identify the weakest subsystem to optimize products and improve their reliabilities.However,traditional ranking methods based on failure mode effect and critical analysis(FMECA)does not consider the complex maintenance of products.Herein,a weakness ranking method for the subsystems of heavy-duty machine tools is proposed based on generalized FMECA information.In this method,eight reliability indexes,including maintainability and maintenance cost,are considered in the generalized FMECA information.Subsequently,the cognition best worst method is used to calculate the weight of each screened index,and the weaknesses of the subsystems are ranked using a technique for order preference by similarity to an ideal solution.Finally,based on the failure data collected from certain domestic heavy-duty horizontal lathes,the weakness ranking result of the subsystems is obtained to verify the effectiveness of the proposed method.An improved weakness ranking method that can comprehensively analyze and identify weak subsystems is proposed herein for designing and improving the reliability of complex electromechanical products.

Selecting suitable key supplier for core components during smart complex equipment central-private enterprises collaborative development process:from two different forms of evaluation information and matching perspective

With the development of central-private enterprises integration,selecting suitable key suppliers are able to provide core components for smart complex equipment.We consider selecting suitable key suppliers from matching perspective,for it not only satisfies natural development of smart complex equipment,it is also a good implementation of equipment project in central-private enterprises integration context.In in this paper,we carry out two parts of research,one is evaluation attributes based on comprehensive analysis,and the other is matching process between key suppliers and core components based on the matching attribute.In practical analysis process,we employ comprehensive evaluated analysis methods to acquire relevant attributes for the matching process that follows.In the analysis process,we adopt entropy-maximum deviation method(MDM)-decision-making trial and evaluation laboratory(DEMATEL)-technique for order preference by similarity to an ideal solution(TOPSIS)to obtain a comprehensive analysis.The entropy-MDM is applied to get weight value,DEMATEL is utilized to obtain internal relations,and TOPSIS is adopted to get ideal evaluated solution.We consider aggregating two types of evaluation information according to similarities of smart complex equipment based on the combination between geometric mean and arithmetic mean.Moreover,based on the aforementioned attributes and generalized power Heronian mean operator,we aggregate preference information to acquire relevant satisfaction degree,then combine the constructed matching model to get suitable key supplier.Through comprehensive analysis of selecting suitable suppliers,we know that two-sided matching and information aggregation can provide more research perspectives for smart complex equipment.Through analysis for relevant factors,we find that leading role and service level are also significant for the smart complex equipment development process.

Spatial-temporal Evolution Analysis on Land Use Multifunctionality in the China-Vietnam Border Area

Exploring the spatial and temporal evolution characteristics of the border land use multifunctionality(LUMF)provides insights for taking advantage of border land use and optimizing border land use policies.Based on the improved Technique for Order Preference by Similarity to an Ideal Solution(TOPSIS)mode,this study identifies and evaluates the LUMFs in the China-Vietnam border area between 2000 and 2018 from the perspectives of agricultural production,social security,ecological service,landscape recreation,and national security.The results show that:1)The comprehensive land use functions in most counties and cities continued to be improved.2)The comprehensive land use function exhibits remarkable spatial divergence and aggregation characteristics.The high-value area of the agricultural production function and social security function evolves from the east to the west.In addition,the spatial evolution of ecological service function is complicated,without an obvious spatial divergence and aggregation pattern.The landscape recreation function shows different spatial differentiation characteristics in the early and middle stage,and forms a large cluster in the later stage.Finally,the spatial evolution pattern of the national security function is significant.3)Designing differentiated border land policies,improving border land use security,and establishing a long-term mechanism for ecological protection and ecological compensation can aid in optimizing the LUMF level in the border area.

Extension of TOPSIS for fuzzy multi-attribute decision making problem based on experimental analysis

This paper is concerned with a technique for order performance by similarity to ideal solution（TOPSIS） method for fuzzy multi-attribute decision making,in which the information about attribute weights is partly known and the attribute values take form of triangular fuzzy numbers.Considering the fact that the triangular fuzzy TOPSIS results yielded by different distance measures are different from others,a comparative analysis of triangular fuzzy TOPSIS ranking from each distance measure is illustrated with discussion on standard deviation.By applying the most reasonable distance,the deviation degrees between attribute values are measured.A linear programming model based on the maximal deviation of weighted attribute values is established to obtain the attribute weights.Therefore,alternatives are ranked by using TOPSIS method.Finally,a numerical example is given to show the feasibility and effectiveness of the method.

Threat evaluation method of warships formation air defense based on AR(p)-DITOPSIS

For the target threat evaluation of warships formation air defense, the sample data are frequently insufficient and even incomplete. The existing evaluation methods rely too much on expertise and are difficult to carry out for the dynamic evaluation on time series. In order to solve these problems, a threat evaluation method based on the AR(p)(auto regressive(AR))-dynamic improved technique for order preference by similarity to ideal solution(DITOPSIS) method is proposed. The AR(p) model is adopted to predict the missing data on the time series. Then, the entropy weight method is applied to solve each index weight at the objective point. Kullback-Leibler divergence(KLD) is used to improve the traditional TOPSIS, and to carry out the target threat evaluation. The Poisson distribution is used to assign the weight value.Simulation results show that the improved AR(p)-DITOPSIS threat evaluation method can synthetically take into account the target threat degree in time series and is more suitable for the threat evaluation under the condition of missing the target data than the traditional TOPSIS method.

Dynamic Target Wireless Network Selection Technique Using Fuzzy Linguistic Variables

Even though various wireless Net- work Access Technologies （NATs） with dif- ferent specifications and applications have been developed in the recent years, no single wireless technology alone can satisfy the any- time, anywhere, and any service wire- less-access needs of mobile users. A real seamless wireless mobile environment is only realized by considering vertical and horizontal handoffs together. One of the major design issues in heterogeneous wireless networks is the support of Vertical Handoff （VHO）. VHO occurs when a multi-interface enabled mobile terminal changes its Point of Attachment （PoA） from one type of wireless access technology to another, while maintaining an active session. In this paper we present a novel multi-criteria VHO algorithm, which chooses the target NAT based on several factors such as user preferences, system parameters, and traf- tic-types with varying Quality of Service （QoS） requirements. Two modules i.e., VHO Neces- sity Estimation （VHONE） module and target NAT selection module, are designed. Both modules utilize several ＂weighted＂ users＇ and system＇s parameters. To improve the robust- ness of the proposed algorithm, the weighting system is designed based on the concept of fuzzy linguistic variables.

DNA extraction method selection for agricultural soil using TOPSIS multiple criteria decision-making model

There is an increased interest in the extraction of nucleic acids from various environmental samples since culture-independent molecular techniques contribute to deepen and broaden the understanding of a greater portion of uncultivable microorganisms. Due to difficulties to select the optimum DNA extraction method in view of downstream molecular analyses, this article presents a straightforward mathematical framework for comparing some of the most commonly used methods. Four commercial DNA extraction kits and two physical-chemical methods (bead-beating and freeze-thaw) were compared for the extraction of DNA under several quantitative DNA analysis criteria: yield of extraction, purity of extracted DNA (A260/280 and A260/230 ratios), degradation degree of DNA, easiness of PCR amplification, duration of extraction, and cost per extraction. From a practical point of view, it is unlikely that a single DNA extraction strategy can be optimum for all selected criteria. Hence, a systematic Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) was employed to compare the methods. The PowerSoil? DNA Isolation Kit was systematically defined as the best performing method for extracting DNA from soil samples. More specifically, for soil:manure and soil:manure:biochar mixtures, the PowerSoil?DNA Isolation Kit method performed best, while for neat soil samples its alternative version gained the first rank.

TOPSIS with Belief Structure for Group Belief Multiple Criteria Decision Making

The technique for order performance by similarity to ideal solution （TOPSIS） is one of the major techniques in dealing with multiple criteria decision making （MCDM） problems, and the belief structure （BS） model has been used successfully for uncertain MCDM with incompleteness, impreciseness or ignorance. In this paper, the TOPSIS method with BS model is proposed to solve group belief MCDM problems. Firstly, the group belief MCDM problem is structured as a belief decision matrix in which the judgments of each decision maker are described as BS models, and then the evidential reasoning approach is used for aggregating the multiple decision makers＇ judgments. Subsequently, the positive and negative ideal belief solutions are defined with the principle of TOPSIS. To measure the separation from ideal solutions, the concept and algorithm of belief distance measure are defined, which can be used for comparing the difference between BS models. Finally, the relative closeness and ranking index are calculated for ranking the alternatives. A numerical example is given to illustrate the proposed method.

Optimal design of functionally graded Pm PV/CNT nanocomposite cylindrical tube for purpose of torque transmission

Carbon nanotube(CNT)/polymer nanocomposites have vast application in industry because of their light mass and high strength. In this work, a cylindrical tube which is made up of functionally graded(FG) PmP V/CNT nanocomposite, is optimally designed for the purpose of torque transmission. The main confining parameters of a rotating shaft in torque transmission process are mass of the shaft, critical speed of rotation and critical buckling torque. It is required to solve a multi-objective optimization problem(MOP) to consider these three targets simultaneously in the process of design. The three-objective optimization problem for this case is defined and solved using a hybrid method of FEM and modified non-dominated sorting genetic algorithm(NSGA-II), by coupling two softwares, MATLAB and ABAQUS. Optimization process provides a set of non-dominated optimal design vectors. Then, two methods, nearest to ideal point(NIP) and technique for ordering preferences by similarity to ideal solution(TOPSIS), are employed to choose trade-off optimum design vectors. Optimum parameters that are obtained from this work are compared with the results of previous studies for similar cylindrical tubes made from composite or a hybrid of aluminum and composite that more than 20% improvement is observed in all of the objective functions.

Fuzzy TOPSIS method to primary crusher selection for Golegohar Iron Mine(Iran)

Selection of the crusher required a great deal of design regarding to the mine planning. Selection of suitable primary crusher from all of available primary crushers is a multi-criterion decision making(MCDM) problem. The present work explores the use of technique for order performance by similarity to ideal solution(TOPSIS) with fuzzy set theory to select best primary crusher for Golegohar Iron Mine in Iran. Gyratory, double toggle jaw, single toggle jaw, high speed roll crusher, low speed sizer, impact crusher, hammer mill and feeder breaker crushers have been considered as alternatives. Also, the capacity, feed size, product size, rock compressive strength, abrasion index and application of primary crusher for mobile plants were considered as criteria for solution of this MCDM problem. To determine the order of the alternatives, closeness coefficient is defined by calculating the distances to the fuzzy positive ideal solution(FPIS) and fuzzy negative ideal solution(FNIS). Results of our work based on fuzzy TOPSIS method show that the gyratory is the best primary crusher for the studied mine.

Synthetic security assessment for incomplete interval-valued information system

In order to understand the security conditions of the incomplete interval-valued information system （IllS） and acquire the corresponding solution of security problems, this paper proposes a multi-attribute group decision- making （MAGDM） security assessment method based on the technique for order performance by similarity to ideal solution （TOPSIS）. For IllS with preference information, combining with dominance-based rough set approach （DRSA）, the effect of incomplete interval-valued information on decision results is discussed. For the imprecise judgment matrices, the security attribute weight can be obtained using Gibbs sampling. A numerical example shows that the proposed method can acquire some valuable knowledge hidden in the incomplete interval-valued information. The effectiveness of the proposed method in the synthetic security assessment for IIIS is verified.

An Integrated Framework for Cloud Service Selection Based on BOM and TOPSIS

Many businesses have experienced difficulties in selecting a cloud service provider(CSP)due to the rapid advancement of cloud computing services and the proliferation of CSPs.Many independent criteria should be considered when evaluating the services provided by different CSPs.It is a case of multi-criteria decision-making(MCDM).This paper presents an integrated MCDM cloud service selection framework for determining the most appropriate service provider based on the best only method(BOM)and technique for order of preference by similarity to ideal solution(TOPSIS).To obtain the weights of criteria and the relative importance of CSPs based on each criterion,BOM performs pairwise comparisons of criteria and also for alternatives on each criterion,and TOPSIS uses these weights to rank cloud alternatives.An evaluation and validation of the proposed framework have been carried out through a use-case model to prove its efficiency and accuracy.Moreover,the developed framework was compared with the analytical hierarchical process(AHP),a popular MCDM approach,based on two perspectives:efficiency and consistency.According to the research results,the proposed framework only requires 25%of the comparisons needed for the AHP approach.Furthermore,the proposed framework has a CR of 0%,whereas AHP has 38%.Thus,the proposed framework performs better than AHPwhen it comes to computation complexity and consistency,implying that it is more efficient and trustworthy.

SAE-TOPSIS algorithm for vertical handoff decision in heterogeneous wireless networks

An improved technique for order preference by similarity to ideal solution （TOPSIS） algorithm, SAE-TOPSIS, is proposed for the vertical handoff decision in heterogeneous wireless networks. The signal to interference plus noise ratio （SINR） effects, analytic hierarchy process （AHP） and infor- mation entropy （SAE） weight method were introduced into the algorithm. Handoff decision meeting the multi-attribute quality of service （QoS） requirement is made according to an attribute matrix and weight vector using the TOPSIS algorithm. The simulation results have shown that the proposed algo- rithm can provide satisfactory performance fitted to the characteristics of the traffic.

采煤机滚筒工作性能优化研究

在实际生产中,截割破碎过程是多作用耦合的结果,离散元法(DEM)与多体动力学(MBD)双向耦合技术可实现煤机设备与煤壁的信息交互,符合实际生产情况,具有较大的优越性。为提高采煤机滚筒的工作性能,基于DEM−MBD双向耦合机理,结合力学性能试验和模拟试验得到实际工况参数,采用仿真软件EDEM和RecurDyn建立了采煤机滚筒截割煤壁的双向耦合模型,对仿真过程中滚筒所受的转矩和截割力进行分析,证明耦合效果和截割效果较好。设计了单因素试验和正交试验,分析了滚筒运行参数对工作性能的影响规律,并利用SPSS软件得到滚筒转速、截割深度、牵引速度对截割比能耗、装煤率、载荷波动系数的影响程度,通过现场试验验证了模型的可行性。构建了以滚筒转速、截割深度、牵引速度为决策变量,以截割比能耗、装煤率和载荷波动系数为目标的多目标优化模型,利用改进多目标灰狼(MOGWO)算法和优劣解距离法(TOPSIS)对模型进行求解,得出当滚筒转速为31.12 r/min、截割深度为639.4 mm、牵引速度为5.58 m/min时,采煤机滚筒的工作性能最优,此时截割比能耗为0.4677 kW·h/^(3),装煤率为43.01%,载荷波动系数为0.3278。