Comparison and Selection of Water Restoration Techniques for Artificial Landscape Lakes in Nantong City

As an important part of urban infrastructure,urban water system is of great and far-reaching significance for ensuring urban flood control and waterlogging safety,protecting ecological environment and building livable homes.Taking the urban water system of Nantong as an example,Nantong Water Resources Bureau issued R evision of Nantong Urban Water System Planning in 2017,and put forward the construction of the"two circles,eight lakes and nine veins"water system layout,giving new vitality to the urban water system.In view of problems existing in newly excavated artificial landscape lakes,such as fragile water ecosystem,strong eutrophication trend,poor environmental sensory effect and unsatisfactory water landscape effect,it is urgent to study the in-situ water ecological restoration technique of"algae-controlling zooplankton+submerged plant community"to build a"grass-type clear water"ecosystem for artificial landscape lakes,so as to improve the water sensory index and self-purification ability and finally realize the double improvement of"sensory effect and water quality"of artificial landscape lakes.

Effects of Different Tillage Techniques on Yield and Water Use Efficiency in Broomcorn Millet

[Objective] The effects of different tillage techniques on dry matter accu- mulation, soil water content, water use efficiency and yield of broomcom millet were studied. [Method] With Jinsu 9 as an experiment material, the effects of deep tillage, traditional tillage and no tillage and rotary tillage on dry matter accumulation, soil water content, water use efficiency and yield of broomcom millet were investi- gated. [Result] Dry matter accumulation rate and accumulated amount were signifi- cantly higher in the deep tillage, no tillage and rotary tillage treatments than in the conventional tillage treatment, and the highest in the deep tillage treatment. The soil water content of the deep tillage treatment at 0-100 cm was higher than those of other tillage techniques, deep tillage also exhibited the highest soil water storage, and water use efficiency values were in order of deep tillage〉rotary tillage〉no tillage〉conventional tillage. The deep tillage treatment also showed the highest grain weight per spike, 1 000-grain weight and yield, while conventional tillage exhibited the lowest values, indicating that deep tillage is most beneficial to improvement of yield and water use efficiency of broomcom millet. [Conclusion] This study provides a scientific basis for water use efficiency of broomcorh millet in its main producing areas.

Water Surface Landscaping Techniques and Theoretic Research of Four Famous Gardens in China

With Summer Resort,Clear Ripples Garden,Humble Administrator's Garden and Lingering Garden as the study subjects,the paper had focused on researches on water surface landscaping techniques and relevant theories of four famous gardens in China.Water bodies in Summer Resort aimed to manifest the sentimental appeal of lower reaches of Yangtze River,and water surface treatment techniques were based on local characteristics which were dense river network,sandbars and islands surrounded by water and scattered distribution of rivers.Sandbars,islands,banks and bridges were utilized to divide water surface,so as to display basic natural feature of water surface at lower reaches of Yangtze River.Water bodies in Clear Ripples Garden aimed to imitate the artistic concept of West Lake.As for its water surface treatment technique,divided "west dyke" and branch dykes had been used to separate water surface,so as to endow it with the ideological content of "fairy court" and "telepathy between human and nature".Water bodies in Humble Administrator's Garden and Lingering Garden aimed to realize "all rivers and lakes" with "one scoop of water",so that people could associate the artistic conception of a vase expanse of water.The study could provide reference for designers of landscape architecture to conduct water surface design.

Hybrid Model Testing Technique for Deep-Sea Platforms Based on Equivalent Water Depth Truncation

In this paper, an inner turret moored FPSO which works in the water of 320 m depth, is selected to study the socalled ＂passively-truncated ＋ numerical-simulation＂ type of hybrid model testing technique while the tnmcated water depth is 160 m and the model scale ）, = 80. During the investigation, the optimization design of the equivalent-depth truncated system is performed by using the similarity of the static characteristics between the truncated system and the full depth one as the objective function. According to the truncated system, the corresponding physical test model is made. By adopting the coupling time domain simulation method, the tnmcated system model test is numerically reconstructed to carefully verify the computer simulation software and to adjust the corresponding hydrodynamic parameters. Based on the above work, the numerical extrapolation to the full depth system is performed by using the verified computer software and the adjusted hydrodyrmmic parameters. The full depth system model test is then performed in the basin and the results are compared with those from the numerical extrapolation. At last, the implementation procedure and the key technique of the hybrid model testing of the deep-sea platforms are summarized and printed. Through the above investigations, some beneficial conclusions are presented.

Experiences with Rice Grown on Permanent Raised Beds: Effect of Crop Establishment Techniques on Water Use, Productivity, Profitability and Soil Physical Properties

In recent years, conventional rice production technologies have been leading to deterioration of soil health and declining farm profitability due to high inputs of water and labor. Conservation agriculture （CA） based resource-conserving technologies i.e. zero-tillage （ZT）, raised-bed planting and direct-seeded rice （DSR） have shown promise as alternatives to conventional production technologies to overcome these problems. Present study was undertaken during 2009-2012 to establish an understanding of how permanent raised bed cropping system could be practiced to save water at the field application level to improve water productivity and also have the capability to enhance productivity, profitability and soil physical quality. The results showed that among different crop establishment techniques, conventional-tilled puddle transplanted rice （CT-TPR） required 14%-25% more water than other techniques. Compared with the CT-TPR system, zero till direct-seeded rice （ZT-DSR） consumed 6%-10%less water with almost equal system productivity and demonstrated higher water productivity. Wide raised beds saved about 15%-24% water and grain yield decrease of about 8%. Direct-seeded rice after ZT or reduced tillage or on unpuddled soil provided more net income than CT-TPR. The CT-TPR system had higher bulk density and penetration resistance due to compaction caused by the repeated wet tillage in rice. The steady-state infiltration rate and soil aggregation （〉 0.25 mm） were higher under permanent beds and ZT and lower in the CT-TPR system. Under CT-TPR, soil aggregation was static across seasons, whereas it improved under no-till and permanent beds. Similarly, mean weight diameter of aggregates was higher under ZT and permanent beds and increased over time. The study reveals that to sustain the rice productivity, CA-based planting techniques can be more viable options. However, the long-term effects of these alternative technologies need to be studied under varying agro-ecologies in western Uttar Pradesh, India.

A bull-heading water control technique of thermo-sensitive temporary plugging agent

Aimed at the disadvantages of secondary damage to oil layers caused by the conventional bull-heading water control technique, a thermo-sensitive temporary plugging agent for water control was synthesized by water solution polymerization and applied in the field with a new secondary temporary plugging technique. The optimization and performance evaluation of thermo-sensitive temporary plugging agent were carried out through laboratory experiments. The optimized formula is as follows:(6%-8%) acrylamide +(0.08%-0.12%) ammonium persulfate +(1.5%-2.0%) sepiolite +(0.5%-0.8%) polyethylene glycol diacrylate. The thermo-sensitive temporary plugging agent is suitable for formation temperatures of 70-90 ?C, it has high temporary plugging strength(5-40 k Pa), controllable degradation time(1-15 d), the apparent viscosity after degradation of less than 100 m Pa?S and the permeability recovery value of simulated cores of more than 95%. Based on the research results, secondary temporary plugging technique was used in a horizontal well in the Jidong Oilfield. After treatment, the well saw a drop of water cut to 27%, and now it has a water cut of 67%, its daily increased oil production was 4.8 t, and the cumulative oil increment was 750 t, demonstrating that the technique worked well in controlling water production and increasing oil production.

Application of multivariate statistical techniques in assessment of surface water quality in Second Songhua River basin,China

Multivariate statistical techniques,such as cluster analysis(CA),discriminant analysis(DA),principal component analysis(PCA) and factor analysis(FA),were applied to evaluate and interpret the surface water quality data sets of the Second Songhua River(SSHR) basin in China,obtained during two years(2012-2013) of monitoring of 10 physicochemical parameters at 15 different sites.The results showed that most of physicochemical parameters varied significantly among the sampling sites.Three significant groups,highly polluted(HP),moderately polluted(MP) and less polluted(LP),of sampling sites were obtained through Hierarchical agglomerative CA on the basis of similarity of water quality characteristics.DA identified p H,F,DO,NH3-N,COD and VPhs were the most important parameters contributing to spatial variations of surface water quality.However,DA did not give a considerable data reduction(40% reduction).PCA/FA resulted in three,three and four latent factors explaining 70%,62% and 71% of the total variance in water quality data sets of HP,MP and LP regions,respectively.FA revealed that the SSHR water chemistry was strongly affected by anthropogenic activities(point sources:industrial effluents and wastewater treatment plants;non-point sources:domestic sewage,livestock operations and agricultural activities) and natural processes(seasonal effect,and natural inputs).PCA/FA in the whole basin showed the best results for data reduction because it used only two parameters(about 80% reduction) as the most important parameters to explain 72% of the data variation.Thus,this work illustrated the utility of multivariate statistical techniques for analysis and interpretation of datasets and,in water quality assessment,identification of pollution sources/factors and understanding spatial variations in water quality for effective stream water quality management.

Assessment of water resources in Yarmouk River Basin using geospatial technique during the period 1980–2020

It is common knowledge that Yarmouk River Basin(YRB)is shared between Jordan and Syria.Management of YRB trans-boundary water resources is attracting increasing interest because it is a strategic water resource for the riparian countries.Actually,lack of sharing information regarding hydrological flows and basin’s water management between partners’countries makes it difficult to distinguish between natural and man-made factors affecting the water body.Therefore,this study seeks to address and assess the main on-site changes that exert on YRB.Geospatial technique and arithmetic equations were combined to carry out an assessment of the changes on water resources in YRB.Data,information and field measurements of the basin were aggregated,compiled and presented to determine the extent of changes during the period 1980-2020.Remarkable findings showed that precipitation amount in the basin significantly declined during the period 1980-2020 in particularly after the year 1992.Pumping rate of groundwater was 550 x 103 m3/a,exceeding the basin’s safe yield.Draw down of static groundwater level over time approached the value of-3.2 m/a due to the over abstraction in the aquifer body.Additionally,the evaporation rate reached more than 99%in some regions in the basin.Moreover,the number of private wells has increased from 98 wells in 1980 to 126 wells in 2020,showing the excessive extraction of groundwater.These findings indicate that the study area is subjected to a considerable groundwater depletion in the near future due to extensive abstraction,continuous drilling of illegal wells and decreased annual precipitation under the shadow of the rapid population growth and continuous influx of refugees.Therefore,decision makers-informed scenarios are suggested in the development of water resource portfolios,which involves the combination of management and infrastructural actions that enhance the water productivity of the basin.Further studies are recommended to evaluate the on-site changes on water resources in YRB in collaboration with riparian countries and to establish monitoring system for continuous and accurate measurements of the basin.

Application of homogenization techniques for inflow transport approximation on light water reactor analysis

The transport cross-section based on inflow transport approximation can significantly improve the accuracy of light water reactor(LWR)analysis,especially for the treatment of the anisotropic scattering effect.The previous inflow transport approximation is based on the moderator cross-section and normalized fission source,which is approximated using transport theory.Although the accuracy of reactivity is increased,the P0 flux moment has a large error in the Monte Carlo code.In this study,an improved inflow transport approximation was introduced with homogenization techniques,applying the homogenized cross-section and accurate fission source.The numerical results indicated that the improved inflow transport approximation can increase the P0 flux moment accuracy and maintain the reactivity calculation precision with the previous inflow transport approximation in typical LWR cases.In addition to this investigation,the improved inflow transport approximation is related to the temperature factors.The improved inflow transport approximation is flexible and accurate in the treatment of the anisotropic scattering effect,which can be directly used in the temperature-dependent nuclear data library.

Strategy &Techniques for Restoration of Healthy Aquaecosystem from Toxic Super Eutrophic Water Body

There are complex river-lake systems in the Taihu Lake catchment with total water surface area of 6174.7 km2, and population density of 1079/km2, including Taihu Lake water surface area of 2338 km2. The water systems in this catchment have healthy aquaecosystems during long history. However, in some riverlets in this catchment the water quality was estimated as “acute toxicity for higher organisms” and over standards for many heavy metal elements content;there were no any living plants and macro organisms in the water body, because there were developed a series of industry with abundant release of heavy metals and difficult decomposition organic chemical components along the riverlets during last decades. The even more serious situation was observed in sediments of the riverlets. How to restore such riverlet into a healthy aquaeosystem with abound plants and higher organisms? The main strategy and techniques are described in this paper as summarizing a report of engineering in a riverlet in Wuxi New District during last years, which leads to restore the aquaecosystem into a healthy one with abundant surface plant cultured on floating islands and observed living fish, lobster, frog, toad, mollusk and others in the riverlet. The main techniques are: 1) softwall buffer technic;2) floating eco-island technic by using which can culture any plant which can be cultured in solution;3) immobilized nitrogen cycle bacteria (INCB) technic;4) tattering esters and other big-molecule organic chemicals by using electronic pulse technic and photosensitization technic;5) mist spray facility technic for improving dissolved oxygen in deep water layers;6) technic for buffering and suppressing H2S release from water;7) the appropriate portion of surface with cultured plant to the total water surface area is about 1/3;8) Cress [Oenanthe Ljavanica (Bl.) DC.] and Myriophyllum verticilatum L. may be cultured in Taihu Lake catchment during the whole year as main plants with mosaic combination of other supplement plants in different seasons.

Study on micro-water-collecting technique in dryland field of spring maize

This paper analyses the effect of water storage and soil moisture conservation by means of micro water collecting technique in the dryland field of spring maize. The results indicate that the rainfall infiltration depth is deeper by means of micro water collecting treatment than that of the control. In micro water collecting treatment, the amount of soil water storage within 0～200 cm of soil layers increases by 50.5 mm, 13.5～58.6 mm, and 24.5 mm respectively during seedling stage, the critical stage of water requirement and the ripening and harvesting stage compared with the control. The micro water collecting technique not only has the function of regulating and adjusting the amount and distribution of field evapotranspiration, but also can raise the water use efficiency, which results in an obvious effect of increasing crop yield, especially in the dry years.

Rapid Sample Product Trial Manufacture Technique for Developing Water Meter New Products

This paper advances the viewpoints and methods of the rapid sample product trial manufacture technique for developing water meter new products by CAD and simulation, computer virtual assembling and optimizing, rapid machining process and measurement etc. as the design and sample product trial manufacture process of water meter new products are long in product development period, and low in product development efficiency in the present time.

Stable Oxygen and Deuterium Isotope Techniques to Identify Plant Water Sources

There is still very little information on the sources of water absorbed by oil palm plant. This information is very important for water management system in oil palm plantation. Thus, this study was carried out to determine current water sources absorbed by the oil palm roots using oxygen (δ18O) and deuterium isotopes (δD) techniques. Sketches of oxygen and deuterium isotope were total rainfall, throughfall, runoff, measurement at 5 soil depths (namely: 20 cm, 50 cm, 100 cm, 150 cm, and 200 cm), and oil palm stem. Results of this study showed huge variance in the values of oxygen and deuterium isotope. Based on Least Significant Difference (LSD) test, there was no significant value in the oxygen and deuterium isotope of stem water and others;however, a similar value was obtained at the depths of 0 - 20 cm and 20 - 50 cm with the stem water. This indicated that oil palm absorbed water from 0 - 50 cm depth. This result agreed with the oil palm rooting system, which has verified that the root quarter is the most active root of oil palm.

A Review of Water Quality Optimisation Models and Techniques

This paper presents a state of the art review of water quality optimisation models and techniques from early 1970s to date in terms of the model/technique category, model/technique type, purpose and application. The models are categorised into Mathematical Programming Models and Meta-heuristic Programming Models. Similarly, the techniques are categorised into Mathematical Programming Techniques and Meta-heuristic Programming Techniques. The review is concluded by drawing attention to the rare nature of application of interior-point methods to water quality optimisation.

Determination of Heavy Metals at Sub-ppb Levels in Water by Graphite Furnace Atomic Absorption Spectrometry Using a Direct Introduction Technique after Preconcentration with an Iminodiacetate Extraction Disk

A direct analysis method combining an iminodiacetate extraction disk (IED) with graphite furnace atomic absorption spectrometry was developed for the determination of Co, Ni, Cu, Cd, Sn, Pb, and Bi at sub-ppb levels in water. A 100 mL water sample was adjusted to pH 5.6 with nitric acid and a 1 mol?L–1 ammonium acetate solution, and then passed through an IED (diameter, 47 mm;effective filtering diameter, 35 mm) at a flow rate of 80 - 100 mL?min–1 to preconcentrate seven analytes. The IED was dried at 100?C for 20 min in an electric oven, and 110 - 145 small disks, each 2 mm in diameter, were punched out from the IED. A small disk was introduced into the graphite furnace and atomized according to a heating program. For Cd, Sn, Pb, and Bi measurements, Pd was used as a chemical modifier to enhance the absorbances. Calibration was performed using aqueous standard solutions. The detection limits, corresponding to three times the standard deviation (n = 5) of the blank values, were 0.092 μg·L–1 for Co, 0.12 μg·L–1 for Ni, 0.40 μg·L–1 for Cu, 0.077 μg·L–1 for Cd, 0.92 μg·L–1 for Sn, 0.61 μg·L–1 for Pb, and 0.80 μg·L–1 for Bi with an enrichment factor of 140 using a 100-mL water sample. A spike test for the seven analytes in tap water, rainwater, river water, and mineral drinking water showed quantitative recoveries (93% - 108%).

The Potential of Activated Carbon in the Treatment of Water for Human Consumption, a Study of the State of the Art and Its Techniques Used for Its Development

This review article addresses the use of biological activated carbon in water treatment and its techniques for its development, with the premise of analyzing the potential of Activated Carbon (AC) in the treatment of water for human consumption. For this end, it aims to identify the techniques used for the production of AC, use and its benefits, production from vegetable waste for water treatment. Activated carbon has the ability to selectively collect gases, liquids and impurities inside its pores, which is the reason it is widely used in filtration systems and for that the treatment of water, the coal fulfills the function of adsorbent, retaining in its pores certain types of impurities: large particles that cause undesirable color, taste or odor in the water. In the treatment of effluents, coal is used for clarification, deodorization and purification of effluents.

Green High-yield and High-efficiency Cultivation Techniques of Integrated Management of Water and Fertilizer for Maize under Mulch Drip Irrigation

The green high-yield and high-efficiency cultivation techniques of integrated management of water and fertilizer for maize under mulch drip irrigation are described from the aspects of high yield target of maize and its component factor indexes,pre-sowing preparation,sowing,post-sowing management,field management at the seedling stage,integrated management of water and fertilizer for target yield of maize,rational application of micro-fertilizer,comprehensive prevention and control of diseases and pests,timely harvest,etc.,in order to provide a reference for agricultural technicians,maize farmers and maize industry development in northern Xinjiang.

Water Quality Monitoring of the Bezerra River （Cascavel, Brazil） Using SR-TXRF Technique

The present study aims to monitor and assess the water quality of the Bezerra River located in the Western Brazilian Parana state. For the monitoring of river waters, six samplings were established per month during one year. As indicators of the water quality, physico-chemical parameters such as water temperature, pH, turbidity, dissolved oxygen and COD （chemical oxygen demand） were chosen, as well as trace and majority element concentrations. It is noteworthy that the mean annual values of conductivity, turbidity and COD have progressively increased along the river with maximum values after the Cascavel western sewage treatment plant. Only 13 elements were found in the six collection points, but the metallic elements Cr, Mn, Fe, Cu and Zn have shown concentrations above the maximum limits recommended by Brazilian environmental legislation, suggesting the presence of highly polluting anthropogenic sources. Correlation analyses were used to determine the spatio-variability of water quality variables. The six collection sites were grouped into two clusters, with the element composition in the first cluster （sites 1, 2 and 6） being due to strong anthropogenic activities. The study of the Bezerra River water quality could help to develop municipal environmental policies and help with the management of water conservation in the Bezerra River basin.

Soil-water characteristics of Gaomiaozi bentonite by vapour equilibrium technique

Soil-water characteristics of Gaomiaozi(GMZ)Ca-bentonite at high suctions(3–287MPa)are measured by vapour equilibrium technique.The soil-water retention curve(SWRC)of samples with the same initial compaction states is obtained in drying and wetting process.At high suctions,the hysteresis behaviour is not obvious in relationship between water content and suction,while the opposite holds between degree of saturation and suction.The suction variation can change its water retention behaviour and void ratio.Moreover,changes of void ratio can bring about changes in degree of saturation.Therefore,the total change in degree of saturation includes changes caused by suction and that by void ratio.In the space of degree of saturation and suction,the SWRC at constant void ratio shifts to the direction of higher suctions with decreasing void ratio.However,the relationship between water content and suction is less affected by changes of void ratio.The degree of saturation decreases approximately linearly with increasing void ratio at a constant suction.Moreover,the slope of the line decreases with increasing suction and they show an approximately linear relationship in semi-logarithmical scale.From this linear relationship,the variation of degree of saturation caused by the change in void ratio can be obtained.Correspondingly,SWRC at a constant void ratio can be determined from SWRC at different void ratios.