The particle size of starting materials, the homogeneity of the carbon/oxide mixtures, and the carbon content are important parameters for a rapid reaction. The influences of technological parameters(carbon particle...The particle size of starting materials, the homogeneity of the carbon/oxide mixtures, and the carbon content are important parameters for a rapid reaction. The influences of technological parameters(carbon particle size, oxide particle size, mixing method, carbon content) on the reaction rate of carbothermal reduction and nitridation of titanium dioxide (TiO2 ) were investigated by a continuous thermo-gravimetric analyzer for large size specimen. The carbon particle size is the most impor tant parameter for a rapid reaction, but carbon particle may have no influence on the morphology of titanium nitride (TiN) powder. Oxide particles are the precursors of TiN powder, but the TiO2 particles size has very little influence on the reaction rate. The carbon content not only influences the reaction rate to some degree, but also influences the purity of TiN powder. The mixing method of the specimen has very little influence on the reaction rate. These results are suitable for other nitrides and carbides prepared by carbothermal reduction method.展开更多
Objective: The study aims to investigate some physical and technological parameters of varieties of maize collected from the most representative areas of maize production in the southern part of Benin, and mainly used...Objective: The study aims to investigate some physical and technological parameters of varieties of maize collected from the most representative areas of maize production in the southern part of Benin, and mainly used by the populations of those areas. Method: The chemical composition, physical and technological characteristics of the grains were determined using standard methods. Results: The results showed that the weight of 1000 grains ranges from 158.01 to 305.12 g, the length from 0.79 to 1.81 cm, the average width from 0.74 to 1.51 cm, thickness from 0.36 to 0.85 cm and density from 1.07 to 1.25. Regarding the technological parameters, the hardness of the grains before and after cooking was between 16.78 and 47.20 kgf, and 0.23 and 0.71 kgf respectively, while the cooking time varies from 71.00 and 158.33 mn. There was a positive and significant correlation (r = 0.405;p < 0.026) between the hardness after cooking and the weight of 1000 grains, between the hardness after cooking and grain width (r = 0.460;p < 0.011). A positive and highly significant correlation (r = 0.527, p < 0.003) was also observed between the hardness after cooking and the grain length, between the hardness after cooking and the thickness of grain (r = 0.476, p < 0.008), and between the grain density and the weight of 1000 grains (r = 0.481, p < 0.007). A positive and highly significant correlation (r = 0.923, p < 0.000) was also observed between maize grain length and width, and between grain length and grain thickness (r = 0.764, p < 0.000) and between the width and thickness (r = 0.764, p < 0.000). On the other hand, a significant negative correlation (r = -0.394, p < 0.031) was found between the hardness before cooking and the thickness and between the hardness before cooking and sphericity index (r = -0465*, p Conclusion: Through its chemical and technological characteristics the maize constitutes an important raw material for many culinary recipes in West African region.展开更多
The continuous casting technological parameters have a great influence on the secondary dendrite arm spacing of the slab, which determines the segregation behavior of materials. Therefore, the identification of techno...The continuous casting technological parameters have a great influence on the secondary dendrite arm spacing of the slab, which determines the segregation behavior of materials. Therefore, the identification of technological parameters of continuous casting process directly impacts the property of slab. The relationships between continuous casting technological parameters and cooling rate of slab for spring steel were built using BP neural network model, based on which, the relevant secondary dendrite arm spacing was calculated. The simulation calculation was also carried out using the industrial data. The simulation results show that compared with that of the traditional method, the absolute error of calculation result obtained with BP neural network model reduced from 0. 015 to 0. 0005, and the relative error reduced from 6, 76 % to 0.22 %. BP neural network model had a more precise accuracy in the optimization of continuous casting technological parameters.展开更多
Using a special coated sand as the material of the selected laser sintering (SLS), the authors test and investigate the strength change of the test samples in terms of different sintering parameters (scanning speed, l...Using a special coated sand as the material of the selected laser sintering (SLS), the authors test and investigate the strength change of the test samples in terms of different sintering parameters (scanning speed, laser power, sintering thickness, and so on). The characteristics of coated sand hardening by laser beam are analyzed. The sintered mold (or core) for given casting is poured with molten metal.展开更多
According to the survey of Bao Steel's pickling tenstion leveler,the technology of the tension leveler is analysed systematically.In order to solve the problem which hinders the production,the given technological ...According to the survey of Bao Steel's pickling tenstion leveler,the technology of the tension leveler is analysed systematically.In order to solve the problem which hinders the production,the given technological parameters of this leveler have been improved and good results achieved.展开更多
To apply the multi-point forming technology to the field of tube processing,the process of multi-point forming for tube is studied.Numerical simulation for the process of multi-point forming for tube is achieved by us...To apply the multi-point forming technology to the field of tube processing,the process of multi-point forming for tube is studied.Numerical simulation for the process of multi-point forming for tube is achieved by using elastic-plastic FEM in ABAQUS.During simulation,reasonable coefficient of mass scaling and friction model of penalty function are used.The influence of several major technological parameters on the process is analyzed.When the tube diameter is 60 mm and the forming curvature radius is 1000 mm,the distortion rate of cross-section and the absolute forming error gradually decrease with the increasing of tube wall thickness;However,when the tube wall thickness is constant,the smaller the curvature radius,the larger the distortion rate of cross-section,but as to forming part,its absolute forming error becomes smaller.展开更多
The relation between technology parameters and performance index of the wheat three-stage concurrent-flow drying technology is studied by use of quadratic orthogonial rotate combinative experiment design method.The op...The relation between technology parameters and performance index of the wheat three-stage concurrent-flow drying technology is studied by use of quadratic orthogonial rotate combinative experiment design method.The optimum parameters of drying technology are obtained by nonlinear optimize corresponding regression model and test.All experiment was finished in concurrent-flow grain drying experiment table.The results of this study will be significant for designing energy-saving grain drying machine.展开更多
A mathematical formulation is applied to represent the phenomena in theincremental melting and solidification process (IMSP), and the temperature and electromagneticfields and the depth of steel liquid phase are calcu...A mathematical formulation is applied to represent the phenomena in theincremental melting and solidification process (IMSP), and the temperature and electromagneticfields and the depth of steel liquid phase are calculated by a finite difference technique using thecontrol volume method. The result shows that the predicted values are in good agreement with theobservations. In accordance with the calculated values for different kinds of materials anddifferent size of molds, the technological parameter of the IMS process such as the power supply andthe descending speed rate can be determined.展开更多
Hosted by The Technical Association of Refractories, Japan, 12th Unified International Technical Conference on Refractories (UNTECR) will be held in Kyoto, Japan from Oct. 31 to Nov. 2, 2011.
The presented work will show the highest relevance of solving all the issues related to this problem and present the results of the analysis of the main expected potential problems,which may occur in the implementatio...The presented work will show the highest relevance of solving all the issues related to this problem and present the results of the analysis of the main expected potential problems,which may occur in the implementation of the INDUSTRY-4.0 reform.It is proved that the pace and level of development of this reform will be determined to a large extent by the effectiveness of the individual nodes used and the entire mechatronic system.It has also been established that as a result of systematic miniaturization of the nodes of radio-electronic equipment and microelectronic equipment and microelectronic technology,the main problem of these reforms and the implementation of complex technological processes is instrumental and technological support,especially with cutting micro-tools and equipment.Therefore,on the example of these investigations,methods for improving their performance are shown.展开更多
Decarbonization of the electric power sector is essential for sustainable development.Low-carbon generation technologies,such as solar and wind energy,can replace the CO_(2)-emitting energy sources(coal and natural ga...Decarbonization of the electric power sector is essential for sustainable development.Low-carbon generation technologies,such as solar and wind energy,can replace the CO_(2)-emitting energy sources(coal and natural gas plants).As a sustainable engineering practice,long-duration energy storage technologies must be employed to manage imbalances in the variable renewable energy supply and electricity demand.Compressed air energy storage(CAES)is an effective solution for balancing this mismatch and therefore is suitable for use in future electrical systems to achieve a high penetration of renewable energy generation.This study introduces recent progress in CAES,mainly advanced CAES,which is a clean energy technology that eliminates the use of fossil fuels,compared with two commercial CAES plants at Huntorf and McIntosh which are conventional ones utilizing fossil fuels.Advanced CAES include adiabatic CAES,isothermal CAES,liquid air energy storage,supercritical CAES,underwater CAES,and CAES coupled with other technologies.The principles and configurations of these advanced CAES technologies are briefly discussed and a comprehensive review of the state-of-the-art technologies is presented,including theoretical studies,experiments,demonstrations,and applications.The comparison and discussion of these CAES technologies are summarized with a focus on technical maturity,power sizing,storage capacity,operation pressure,round-trip efficiency,efficiency of the components,operation duration,and investment cost.Potential application trends were compiled.This paper presents a comprehensive reference for developing novel CAES systems and makes recommendations for future research and development to facilitate their application in several areas,ranging from fundamentals to applications.展开更多
To improve the slab quality, a kind of non-sinusoidal oscillation technique of mold driven by elliptic gears was developed. The waveform functions of non-sinusoidal oscillation were determined, and the calculation met...To improve the slab quality, a kind of non-sinusoidal oscillation technique of mold driven by elliptic gears was developed. The waveform functions of non-sinusoidal oscillation were determined, and the calculation method and curves of technological parameters for non-sinusoidal oscillation were given. At the case of waveform deviation factor a equal to 0.31 and oscillation amplitude h equal to ±2.7 mm, the relationship between oscillation frequency and casting speed is determined, and the technological parameters for non-sinusoidal oscillation are calculated. The testing results of industrial application indicated that this technique could not only improve the Slab surface quality, but also reduce the steel breakout.展开更多
By analyzing the stepped test pieces with optical microscope,the influence of the technological parameters including rolling temperature and reduction on the austenite recrystallization fraction of steel with Nb conte...By analyzing the stepped test pieces with optical microscope,the influence of the technological parameters including rolling temperature and reduction on the austenite recrystallization fraction of steel with Nb content of 0.08% deformed at high temperature processing was studied,and the deformed austenite recrystallization figures of the test steel were obtained.The result indicates that when the reduction is 60%,the critical temperature of complete recrystallization is 1070 ℃ and the borderline temperature of non-recrystallization is 900 ℃.In contrast with general HSLA steel,the recrystallization and non-recrystallization temperatures are respectively 120 ℃ and 100 ℃ higher than those of ordinary HSLA,so the steel with high content of Nb has better hot processing performance because Nb has great function of holding back recrystallization.展开更多
The equilibrium and kinetic characteristics of the adsorption of erythromycin to Sepabeads SP825 were determined.The equilibrium data in a batch system was well described by a Langmuir isotherm.The separation performa...The equilibrium and kinetic characteristics of the adsorption of erythromycin to Sepabeads SP825 were determined.The equilibrium data in a batch system was well described by a Langmuir isotherm.The separation performance was investigated in a fixed-bed system with respect to the adsorption superficial velocity,ionic strength and pH.A mathematical model was used to simulate the mass transfer mechanism,taking film mass transfer,pore diffusion and axial dispersion into account.The model predictions were consistent with the experi-mental data and were consequently used to determine the mass transfer coefficients.展开更多
文摘The particle size of starting materials, the homogeneity of the carbon/oxide mixtures, and the carbon content are important parameters for a rapid reaction. The influences of technological parameters(carbon particle size, oxide particle size, mixing method, carbon content) on the reaction rate of carbothermal reduction and nitridation of titanium dioxide (TiO2 ) were investigated by a continuous thermo-gravimetric analyzer for large size specimen. The carbon particle size is the most impor tant parameter for a rapid reaction, but carbon particle may have no influence on the morphology of titanium nitride (TiN) powder. Oxide particles are the precursors of TiN powder, but the TiO2 particles size has very little influence on the reaction rate. The carbon content not only influences the reaction rate to some degree, but also influences the purity of TiN powder. The mixing method of the specimen has very little influence on the reaction rate. These results are suitable for other nitrides and carbides prepared by carbothermal reduction method.
文摘Objective: The study aims to investigate some physical and technological parameters of varieties of maize collected from the most representative areas of maize production in the southern part of Benin, and mainly used by the populations of those areas. Method: The chemical composition, physical and technological characteristics of the grains were determined using standard methods. Results: The results showed that the weight of 1000 grains ranges from 158.01 to 305.12 g, the length from 0.79 to 1.81 cm, the average width from 0.74 to 1.51 cm, thickness from 0.36 to 0.85 cm and density from 1.07 to 1.25. Regarding the technological parameters, the hardness of the grains before and after cooking was between 16.78 and 47.20 kgf, and 0.23 and 0.71 kgf respectively, while the cooking time varies from 71.00 and 158.33 mn. There was a positive and significant correlation (r = 0.405;p < 0.026) between the hardness after cooking and the weight of 1000 grains, between the hardness after cooking and grain width (r = 0.460;p < 0.011). A positive and highly significant correlation (r = 0.527, p < 0.003) was also observed between the hardness after cooking and the grain length, between the hardness after cooking and the thickness of grain (r = 0.476, p < 0.008), and between the grain density and the weight of 1000 grains (r = 0.481, p < 0.007). A positive and highly significant correlation (r = 0.923, p < 0.000) was also observed between maize grain length and width, and between grain length and grain thickness (r = 0.764, p < 0.000) and between the width and thickness (r = 0.764, p < 0.000). On the other hand, a significant negative correlation (r = -0.394, p < 0.031) was found between the hardness before cooking and the thickness and between the hardness before cooking and sphericity index (r = -0465*, p Conclusion: Through its chemical and technological characteristics the maize constitutes an important raw material for many culinary recipes in West African region.
文摘The continuous casting technological parameters have a great influence on the secondary dendrite arm spacing of the slab, which determines the segregation behavior of materials. Therefore, the identification of technological parameters of continuous casting process directly impacts the property of slab. The relationships between continuous casting technological parameters and cooling rate of slab for spring steel were built using BP neural network model, based on which, the relevant secondary dendrite arm spacing was calculated. The simulation calculation was also carried out using the industrial data. The simulation results show that compared with that of the traditional method, the absolute error of calculation result obtained with BP neural network model reduced from 0. 015 to 0. 0005, and the relative error reduced from 6, 76 % to 0.22 %. BP neural network model had a more precise accuracy in the optimization of continuous casting technological parameters.
文摘Using a special coated sand as the material of the selected laser sintering (SLS), the authors test and investigate the strength change of the test samples in terms of different sintering parameters (scanning speed, laser power, sintering thickness, and so on). The characteristics of coated sand hardening by laser beam are analyzed. The sintered mold (or core) for given casting is poured with molten metal.
文摘According to the survey of Bao Steel's pickling tenstion leveler,the technology of the tension leveler is analysed systematically.In order to solve the problem which hinders the production,the given technological parameters of this leveler have been improved and good results achieved.
基金Sponsored by the Specific Targeted Research Projects,the 6th Framework Project,EU(Grant No.AST5-CT-2006-030877)
文摘To apply the multi-point forming technology to the field of tube processing,the process of multi-point forming for tube is studied.Numerical simulation for the process of multi-point forming for tube is achieved by using elastic-plastic FEM in ABAQUS.During simulation,reasonable coefficient of mass scaling and friction model of penalty function are used.The influence of several major technological parameters on the process is analyzed.When the tube diameter is 60 mm and the forming curvature radius is 1000 mm,the distortion rate of cross-section and the absolute forming error gradually decrease with the increasing of tube wall thickness;However,when the tube wall thickness is constant,the smaller the curvature radius,the larger the distortion rate of cross-section,but as to forming part,its absolute forming error becomes smaller.
文摘The relation between technology parameters and performance index of the wheat three-stage concurrent-flow drying technology is studied by use of quadratic orthogonial rotate combinative experiment design method.The optimum parameters of drying technology are obtained by nonlinear optimize corresponding regression model and test.All experiment was finished in concurrent-flow grain drying experiment table.The results of this study will be significant for designing energy-saving grain drying machine.
文摘A mathematical formulation is applied to represent the phenomena in theincremental melting and solidification process (IMSP), and the temperature and electromagneticfields and the depth of steel liquid phase are calculated by a finite difference technique using thecontrol volume method. The result shows that the predicted values are in good agreement with theobservations. In accordance with the calculated values for different kinds of materials anddifferent size of molds, the technological parameter of the IMS process such as the power supply andthe descending speed rate can be determined.
文摘Hosted by The Technical Association of Refractories, Japan, 12th Unified International Technical Conference on Refractories (UNTECR) will be held in Kyoto, Japan from Oct. 31 to Nov. 2, 2011.
基金This work was supported by Shota Rustaveli National Science Foundation(SRNSF)[PHDF-19-2224,Improving the efficiency of mechatronic systems in order to ensure the reform of“Industry-4.0”].
文摘The presented work will show the highest relevance of solving all the issues related to this problem and present the results of the analysis of the main expected potential problems,which may occur in the implementation of the INDUSTRY-4.0 reform.It is proved that the pace and level of development of this reform will be determined to a large extent by the effectiveness of the individual nodes used and the entire mechatronic system.It has also been established that as a result of systematic miniaturization of the nodes of radio-electronic equipment and microelectronic equipment and microelectronic technology,the main problem of these reforms and the implementation of complex technological processes is instrumental and technological support,especially with cutting micro-tools and equipment.Therefore,on the example of these investigations,methods for improving their performance are shown.
基金the Beijing Natural Science Foundation (JQ21010)the National Natural Science Foundation of China (52376040)+1 种基金the National Science Fund for Distinguished Young Scholars (51925604)the Beijing Nova Program (20230484479).
文摘Decarbonization of the electric power sector is essential for sustainable development.Low-carbon generation technologies,such as solar and wind energy,can replace the CO_(2)-emitting energy sources(coal and natural gas plants).As a sustainable engineering practice,long-duration energy storage technologies must be employed to manage imbalances in the variable renewable energy supply and electricity demand.Compressed air energy storage(CAES)is an effective solution for balancing this mismatch and therefore is suitable for use in future electrical systems to achieve a high penetration of renewable energy generation.This study introduces recent progress in CAES,mainly advanced CAES,which is a clean energy technology that eliminates the use of fossil fuels,compared with two commercial CAES plants at Huntorf and McIntosh which are conventional ones utilizing fossil fuels.Advanced CAES include adiabatic CAES,isothermal CAES,liquid air energy storage,supercritical CAES,underwater CAES,and CAES coupled with other technologies.The principles and configurations of these advanced CAES technologies are briefly discussed and a comprehensive review of the state-of-the-art technologies is presented,including theoretical studies,experiments,demonstrations,and applications.The comparison and discussion of these CAES technologies are summarized with a focus on technical maturity,power sizing,storage capacity,operation pressure,round-trip efficiency,efficiency of the components,operation duration,and investment cost.Potential application trends were compiled.This paper presents a comprehensive reference for developing novel CAES systems and makes recommendations for future research and development to facilitate their application in several areas,ranging from fundamentals to applications.
基金Item Sponsored by National Natural Science Foundation of China(51275446)National Natural Science Foundation of China and Baosteel Group Co.,Ltd.(U1260203)Natural Science Foundation of Hebei Province of China(E2012203080)
文摘To improve the slab quality, a kind of non-sinusoidal oscillation technique of mold driven by elliptic gears was developed. The waveform functions of non-sinusoidal oscillation were determined, and the calculation method and curves of technological parameters for non-sinusoidal oscillation were given. At the case of waveform deviation factor a equal to 0.31 and oscillation amplitude h equal to ±2.7 mm, the relationship between oscillation frequency and casting speed is determined, and the technological parameters for non-sinusoidal oscillation are calculated. The testing results of industrial application indicated that this technique could not only improve the Slab surface quality, but also reduce the steel breakout.
文摘By analyzing the stepped test pieces with optical microscope,the influence of the technological parameters including rolling temperature and reduction on the austenite recrystallization fraction of steel with Nb content of 0.08% deformed at high temperature processing was studied,and the deformed austenite recrystallization figures of the test steel were obtained.The result indicates that when the reduction is 60%,the critical temperature of complete recrystallization is 1070 ℃ and the borderline temperature of non-recrystallization is 900 ℃.In contrast with general HSLA steel,the recrystallization and non-recrystallization temperatures are respectively 120 ℃ and 100 ℃ higher than those of ordinary HSLA,so the steel with high content of Nb has better hot processing performance because Nb has great function of holding back recrystallization.
文摘The equilibrium and kinetic characteristics of the adsorption of erythromycin to Sepabeads SP825 were determined.The equilibrium data in a batch system was well described by a Langmuir isotherm.The separation performance was investigated in a fixed-bed system with respect to the adsorption superficial velocity,ionic strength and pH.A mathematical model was used to simulate the mass transfer mechanism,taking film mass transfer,pore diffusion and axial dispersion into account.The model predictions were consistent with the experi-mental data and were consequently used to determine the mass transfer coefficients.