A Modified Monte Carlo Model of Speckle Tracking of Shear Wave Induced by Acoustic Radiation Force for Acousto-Optic Elasticity Imaging

A modified Monte Carlo model of speckle tracking of shear wave propagation in scattering media is proposed. The established Monte Carlo model mainly concerns the variations of optical electric field and speckle. The two- dimensional intensity distribution and the time evolution of speckles in different probe locations are obtained. The fluctuation of speckle intensity tracks the acoustic-radiation-force shear wave propagation, and especially the reduction of speckle intensity implies attenuation of shear wave. Then, the shear wave velocity is estimated quantitatively on the basis of the time-to-peak algorithm and linear regression processing. The results reveal that a smaller sampling interval yields higher estimation precision and the shear wave velocity is estimated more efficiently by using speckle intensity difference than by using speckle contrast difference according to the estimation error. Hence, the shear wave velocity is estimated to be 2.25 m/s with relatively high accuracy for the estimation error reaches the minimum （0.071）.

Computational Aspects of Network Models for Rubber Elasticity

The non-Gaussian three-chain, eight-chain and full network models for rubber elasticity are cast in rate from. For computational converlency, incompressibility is incorporated through a penalty-type approach. The efficiency and accuracy of the rate forms are discussed in detail.

Estimation of Isotropic Hyperelasticity Constitutive Models to Approximate the Atomistic Simulation Data for Aluminium and Tungsten Monocrystals

In this paper,the choice and parametrisation of finite deformation polyconvex isotropic hyperelastic models to describe the behaviour of a class of defect-free monocrystalline metal materials at the molecular level is examined.The article discusses some physical,mathematical and numerical demands which in our opinion should be fulfilled by elasticity models to be useful.A set of molecular numerical tests for aluminium and tungsten providing data for the fitting of a hyperelastic model was performed,and an algorithm for parametrisation is discussed.The proposed models with optimised parameters are superior to those used in non-linear mechanics of crystals.

A Mean-variance Problem in the Constant Elasticity of Variance(CEV) Model

In this paper, we focus on a constant elasticity of variance （CEV） modeland want to find its optimal strategies for a mean-variance problem under two constrainedcontrols： reinsurance/new business and investment （no-shorting）. First, aLagrange multiplier is introduced to simplify the mean-variance problem and thecorresponding Hamilton-Jacobi-Bellman （HJB） equation is established. Via a powertransformation technique and variable change method, the optimal strategies withthe Lagrange multiplier are obtained. Final, based on the Lagrange duality theorem,the optimal strategies and optimal value for the original problem （i.e., the efficientstrategies and efficient frontier） are derived explicitly.

Generalized Thermo Elasticity in an Infinite Nonhomogeneous Solid Having a Spherical Cavity Using DPL Model

The induced temperature, displacement, and stress fields in an infinite nonhomogeneous elastic medium having a spherical cavity are obtained in the context dual-phase-lag model. The surface of the cavity is stress free and is subjected to a thermal shock. The material is elastic and has an in?homogeneity in the radial direction. The type of non homogeneity is such that the elastic constants, thermal conductivity and density are propor?tional to the nth power of the radial distance. The solutions are obtained analytically employing the Laplace transform technique. The numerical inversion of the transforms is carried out using Fourier series expansions. The stresses, temperature and displacement are computed and presented graphically. A comparison of the results for different theories is presented.

Gas sand distribution prediction by prestack elastic inversion based on rock physics modeling and analysis

Seismic inversion is one of the most widely used technologies for reservoir prediction. Many good results have been obtained but sometimes it fails to differentiate the lithologies and identify the fluids. However, seismic prestack elastic inversion based on rock physics modeling and analysis introduced in this paper is a significant method that can help seismic inversion and interpretation reach a new quantitative （or semi-quantitative） level from traditional qualitative interpretation. By doing rock physics modeling and forward perturbation analysis, we can quantitatively analyze the essential relationships between rock properties and seismic responses and try to find the sensitive elastic properties to the lithology, porosity, fluid type, and reservoir saturation. Finally, standard rock physics templates （RPT） can be built for specific reservoirs to guide seismic inversion interpretation results for reservoir characterization and fluids identification purpose. The gas sand distribution results of the case study in this paper proves that this method has unparalleled advantages over traditional post-stack methods, by which we can perform reservoir characterization and seismic data interpretation more quantitatively and efficiently.

Perfectly matched layer-absorbing boundary condition for finite-element time-domain modeling of elastic wave equations

The perfectly matched layer （PML） is a highly efficient absorbing boundary condition used for the numerical modeling of seismic wave equation. The article focuses on the application of this technique to finite-element time-domain numerical modeling of elastic wave equation. However, the finite-element time-domain scheme is based on the second- order wave equation in displacement formulation. Thus, the first-order PML in velocity-stress formulation cannot be directly applied to this scheme. In this article, we derive the finite- element matrix equations of second-order PML in displacement formulation, and accomplish the implementation of PML in finite-element time-domain modeling of elastic wave equation. The PML has an approximate zero reflection coefficients for bulk and surface waves in the finite-element modeling of P-SV and SH wave propagation in the 2D homogeneous elastic media. The numerical experiments using a two-layer model with irregular topography validate the efficiency of PML in the modeling of seismic wave propagation in geological models with complex structures and heterogeneous media.

Nonlinear elastic deformation of magnesium and cobalt by Preisach-Mayergoyz model

A classic hysteretic model, Preisach-Mayergoyz model （P-M model）, was used to calculate the nonlinear elastic deformation of magnesium （Mg） and cobalt （Co）. Mg and Co samples in cylinder shape were compressively tested by uniaxial test machine to obtain their stress—strain curves with hysteretic loops. The hysteretic loops do have two properties of P-M hysteretic systems： wiping out and congruency. It is proved that P-M model is applicable for the analysis of these two metals’ hysteresis. This model was applied on Mg at room temperature and Co at 300 ℃. By the P-M model, Co and Mg nonlinear elastic deformation can be calculated based on the stress history. The simulated stress—strain curves agree well with the experimental results. Therefore, the mechanical hysteresis of these two metals can be easily predicted by the classic P-M hysteretic model.

Sensitivity analysis for stochastic user equilibrium with elastic demand assignment model

This paper puts forward a rigorous approach for a sensitivity analysis of stochastic user equilibrium with the elastic demand （SUEED） model. First, proof is given for the existence of derivatives of output variables with respect to the perturbation parameters for the SUEED model. Then by taking advantage of the gradient-based method for sensitivity analysis of a general nonlinear program, detailed formulae are developed for calculating the derivatives of designed variables with respect to perturbation parameters at the equilibrium state of the SUEED model. This method is not only applicable for a sensitivity analysis of the logit-type SUEED problem, but also for the probit-type SUEED problem. The application of the proposed method in a numerical example shows that the proposed method can be used to approximate the equilibrium link flow solutions for both logit-type SUEED and probit-type SUEED problems when small perturbations are introduced in the input parameters.

On dynamics of elastic rod based on exact Cosserat model

The analysis of kinematics and dynamics of an elastic rod with circular cross section is studied on the basis of exact Cosserat model under consideration of the tension and shear deformation of the rod. The dynamical equations of a rod with arbitrary initial shape are established in general form. The dynamics of a straight rod under axial tension and torsion is discussed as an example. In discussion of static stability in the space domain the Greenhill criteria of stability and the Euler load are corrected by the influence of tension and shear strain. In analysis of dynamical stability in the time domain it is shown that the Lyapunov and Euler stability conditions of the rod in space domain are the necessary conditions of Lyapunov＇s stability in the time domain. The longitudinal, torsional and lateral vibrations of a straight rod based on exact model are discussed, and an exact formula of free frequency of lateral vibration is obtained. The free frequency formulas of various simplified models, such as the Rayleigh beam, the Kirchhoff rod, and the Timoshenko beam, can be seen as special cases of the exact formula under different conditions of simplification.

Bending of small-scale Timoshenko beams based on the integral/differential nonlocal-micropolar elasticity theory: a finite element approach

A novel size-dependent model is developed herein to study the bending behavior of beam-type micro/nano-structures considering combined effects of nonlocality and micro-rotational degrees of freedom. To accomplish this aim, the micropolar theory is combined with the nonlocal elasticity. To consider the nonlocality, both integral (original) and differential formulations of Eringen’s nonlocal theory are considered. The beams are considered to be Timoshenko-type, and the governing equations are derived in the variational form through Hamilton’s principle. The relations are written in an appropriate matrix-vector representation that can be readily utilized in numerical approaches. A finite element (FE) approach is also proposed for the solution procedure. Parametric studies are conducted to show the simultaneous nonlocal and micropolar effects on the bending response of small-scale beams under different boundary conditions.

Surface effect and non-local elasticity in wave propagation of functionally graded piezoelectric nano-rod excited to applied voltage

A non-local solution for a functionally graded piezoelectric nano-rod is pre- sented by accounting the surface effect. This solution is used to evaluate the charac- teristics of the wave propagation in the rod structure. The model is loaded under a two-dimensional （2D） electric potential and an initially applied voltage at the top of the rod. The mechanical and electrical properties are assumed to be variable along the thick- ness direction of the rod according to the power law. The Hamilton principle is used to derive the governing differential equations of the electromechanical system. The effects of some important parameters such as the applied voltage and gradation of the material properties on the wave characteristics of the rod are studied.

Driving Force Model for Non-pneumatic Elastic Wheel

In order to obtain good driving performance,a driving force model is presented for non-pneumatic elastic wheel.Brush model of pneumatic tyres is introduced and the deformations of elastic supports and tread are also taken into account.The longitudinal slip rate is redefined.The grounding pressure distribution of elastic wheels is analyzed and corrected according to speed,temperature and stiffness.Then rolling resistance equation is developed.Finally,simulation is conducted by software CarSim,and the results show that the estimated values are consistent with simulation values,especially at low longitudinal slip rate.The research can help to optimize design of non-pneumatic elastic wheel.

The Numerical Modeling of 3-D Elastic Wave Equation Using a High-Order,Staggered-Grid, Finite Difference Scheme

This article provides the application of the high-order, staggered-grid, finite-difference scheme to model elastic wave propagation in 3-D isotropic media. Here, we use second-order, tempo- ral- and high-order spatial finite-difference formulations with a staggered grid for discretization of the 3-D elastic wave equations of motion. The set of absorbing boundary conditions based on paraxial approximations of 3-D elastic wave equations are applied to the numerical boundaries. The trial re- sults for the salt model show that the numerical dispersion is decreased to a minimum extent, the accuracy high and diffracted waves abundant. It also shows that this method can be used for modeling wave propagation in complex media with the lateral variation of velocity.

Dynamics Modeling and Numerical Analysis of Rotor with Elastic Support/Dry Friction Dampers

The elastic support/dry friction damper is a type of damper which is used for active vibration control in a rotor system.To establish the analytical model of this type of damper,a two-dimensional friction model-ball/plate model was proposed.By using this ball/plate model,a dynamics model of rotor with elastic support/dry friction dampers was established and experimentally verified.Moreover,the damping performance of the elastic support/dry friction damper was studied numerically with respect to some variable parameters.The numerical study shows that the damping performance of the elastic support/dry friction damper is closely related to the stiffness distribution of the rotor-support system,the damper location,the pressing force between the moving and stationary disk,the friction coefficient,the tangential contact stiffness of the contact interface,and the stiffness of the stationary disk.In general,the damper should be located on an elastic support which has a large vibration amplitude in order to achieve a better damping performance,and the more vibration energy in this elastic support concentrates,the better performance of the damper will be.The larger the tangential contact stiffness of the contact interface,and the stiffness of the stationary disk are,the better performance of the damper will be.There will be an optimal value of the friction force at which the damper performs best.

A method to Estimate Dynamic Responses of VLFS Based on Multi-Floating-Module Model Connected by Elastic Hinges

Based on the elastic foundation beam theory and the multi-floating-module hydrodynamic theory,a novel method is proposed to estimate the dynamic responses of VLFS(Very Large Floating Structure).In still water,a VLFS can be simplified as an elastic foundation beam model or a multi-floating-module model connected by elastic hinges.According to equivalent displacement of the two models in static analysis,the problem of rotation stiffness of elastic hinges can be solved.Then,based on the potential flow theory,the dynamic responding analysis of multi-floatingmodule model under wave loads can be computed in ANSYS-AQWA software.By assembling the time domain analysis results of each module,the dynamic responses of the VLFS can be obtained.Validation of the method is conducted through a series of comparison calculations,which mainly includes a continuous structure and a three-part structure connected by hinges in regular waves.The results of this paper method show a satisfactory agreement with the experiment and calculation data given in relative references.

Mathematical modeling of elastic inverted pendulum control system

Inverted pendulums are important objects of theoretical investigation and experiment in the area of control theory and engineering. The researches concentrate on the rigid finite dimensional models which are described by ordinary differential equations (ODEs) .Complete rigidity is the approximation of practical models ; Elasticity should be introduced into mathematical models in the analysis of system dynamics and integration of highly precise controller. A new kind of inverted pendulum, elastic inverted pendulum was proposed, and elasticity was considered. Mathematical model was derived from Hamiltonian principle and variational methods, which were formulated by the coupling of partial differential equations (PDE) and ODE. Because of infinite dimensional, system analysis and control of elastic inverted pendulum is more sophisticated than the rigid one.

On the Elastic Vibration Model for High Length-Diameter Ratio Rocket with Attitude Control System

An elastic vibration model for high length diameter ratio spinning rocket with attitude control system which can be used for trajectory simulation is established. The basic theory of elastic dynamics and vibration dynamics were both used to set up the elastic vibration model of rocket body. In order to study the problem more conveniently, the rocket's body was simplified to be an even beam with two free ends. The model was validated by simulation results and the test data.

The Analysis of Wall Shear Stress Modulated by Acute Exercise in the Human Common Carotid Artery with an Elastic Tube Model

Assessment of the magnitude and pattern of wall shear stress(WSS)in vivo is the prerequisite for studying the quantitative relationship between exercise-induced WSS and arterial endothelial function.In the previous studies,the calculation of the WSS modulated by exercise training was primarily based upon the rigid tube model,which did not take non-linear effects of vessel elastic deformation into consideration.In this study,with an elastic tube model,we estimated the effect of a bout of 30-minute acute cycling exercise on the WSS and the flow rate in the common carotid artery according to the measured inner diameter,center-line blood flow velocity,heart rates and the brachial blood pressures before and after exercise training.Furthermore,the roles of exerciseinduced arterial diameter and blood flow rate in the change of WSS were also determined.The numerical results demonstrate that acute exercise significantly increases the magnitudes of blood flow rate and WSS.Moreover,the vessel elastic deformation is a non-negligible factor in the calculation of the WSS induced by exercise,which generates greater effects on the minimum WSS than the maximum WSS.Additionally,the contributions of exercise-induced variations in blood flow rate and diameter are almost identical in the change of the mean WSS.

Hybrid absorbing boundary condition for threedimensional elastic wave modeling

Edge reflections are inevitable in numerical modeling of seismic wavefields, and they are usually attenuated by absorbing boundary conditions. However, the commonly used perfectly matched layer （PML） boundary condition requires special treatment for the absorbing zone, and in three-dimensional （3D） modeling, it has to split each variable into three corresponding variables, which increases the computing time and memory storage. In contrast, the hybrid absorbing boundary condition （HABC） has the advantages such as ease of implementation, less computation time, and near-perfect absorption; it is thus able to enhance the computational efficiency of 3D elastic wave modeling. In this study, a HABC is developed from two-dimensional （2D） modeling into 3D modeling based on the I st Higdon one way wave equations, and a HABC is proposed that is suitable for a 3D elastic wave numerical simulation. Numerical simulation results for a homogenous model and a complex model indicate that the proposed HABC method is more effective and has better absorption than the traditional PML method.