Instrumented oscillographic study on impact toughness of an axle steel DZ2 with different tempering temperatures

Compared with the conventional Charpy impact test method,the oscillographic impact test can help in the behavioral analysis of materials during the fracture process.In this study,the trade-off relationship between the strength and toughness of a DZ2 axle steel at various tempering temperatures and the cause of the improvement in impact toughness was evaluated.The tempering process dramatically influenced carbide precipitation behavior,which resulted in different aspect ratios of carbides.Impact toughness improved along with the rise in tempering temperature mainly due to the increase in energy required in impact crack propagation.The characteristics of the impact crack propagation process were studied through a comprehensive analysis of stress distribution,oscilloscopic impact statistics,fracture morphology,and carbide morphology.The poor impact toughness of low-tempering-temperature specimens was attributed to the increased number of stress concentration points caused by carbide morphology in the small plastic zone during the propagation process,which resulted in a mixed distribution of brittle and ductile fractures on the fracture surface.

Grouping tree species to estimate basal area increment in temperate multispecies forests in Durango,Mexico

Multispecies forests have received increased scientific attention,driven by the hypothesis that biodiversity improves ecological resilience.However,a greater species diversity presents challenges for forest management and research.Our study aims to develop basal area growth models for tree species cohorts.The analysis is based on a dataset of 423 permanent plots(2,500 m^(2))located in temperate forests in Durango,Mexico.First,we define tree species cohorts based on individual and neighborhood-based variables using a combination of principal component and cluster analyses.Then,we estimate the basal area increment of each cohort through the generalized additive model to describe the effect of tree size,competition,stand density and site quality.The principal component and cluster analyses assign a total of 37 tree species to eight cohorts that differed primarily with regard to the distribution of tree size and vertical position within the community.The generalized additive models provide satisfactory estimates of tree growth for the species cohorts,explaining between 19 and 53 percent of the total variation of basal area increment,and highlight the following results:i)most cohorts show a"rise-and-fall"effect of tree size on tree growth;ii)surprisingly,the competition index"basal area of larger trees"had showed a positive effect in four of the eight cohorts;iii)stand density had a negative effect on basal area increment,though the effect was minor in medium-and high-density stands,and iv)basal area growth was positively correlated with site quality except for an oak cohort.The developed species cohorts and growth models provide insight into their particular ecological features and growth patterns that may support the development of sustainable management strategies for temperate multispecies forests.

Numerical Simulation of Stress Field in Physical Tempering Process of Flat Soda Lime Silica Glass

Based on the analysis of different theory for glass tempering process,the“structural theory”with stress relaxation and structural relaxation effects was selected to investigate the tempering of flat glass quantificationally.The geometrical model with small size and non-homogeneous mesh were considered to build the finite element models according to the characteristics of stress field.The tempering process of flat glass with12 mm thickness was calculated with the verified finite element model.The transient and permanent stress of the central area,edge and corner end of the flat glass are obtained and analyzed.From the calculation results of basic case,the transient tensile stress at the upper surface of the central area,the center point of edge,the edge of edge,the edge of corner were 14.30,18.94,40.76 and 34.75 MPa,respectively.The transient tensile stress at these points were dangerous to promote the glass to break during the tempering.In addition,the point at the diagonal line of symmetry plane in the thickness direction,which is 14 mm from corner,has the maximum permanent tensile stress about 70.01 MPa in the flat glass after tempering.Thus,it is indicated that the corner is the weakest region in the tempered glass.

Three-dimensional assessment of movement patterns of Sichuan snub-nosed monkeys affected by habitat structure in temperate forests

DEAR EDITOR,Movement patterns can reflect species-specific characteristics of individuals and animal groups at a given scale. Accurate three-dimensional(3D) assessment can quantify the relationship between movement patterns of an animal and its unique habitat. Here, we evaluated the effects of habitat structure on movement patterns of the golden snub-nosed monkey(Rhinopithecus roxellana). We used airborne light detection and ranging(LiDAR) to map the 3D structure of the temperate forest in the Qinling Mountains(Shaanxi, China).

Trees species’ dispersal mode and habitat heterogeneity shape negative density dependence in a temperate forest

Conspecific negative density dependence(CNDD)is a potentially important mechanism in maintaining species diversity.While previous evidence showed habitat heterogeneity and species’dispersal modes affect the strength of CNDD at early life stages of trees(e.g.,seedlings),it remains unclear how they affect the strength of CNDD at later life stages.We examined the degree of spatial aggregation between saplings and trees for species dispersed by wind and gravity in four topographic habitats within a 25-ha temperate forest dynamic plot in the Qinling Mountains of central China.We used the replicated spatial point pattern(RSPP)analysis and bivariate paircorrelation function(PCF)to detect the spatial distribution of saplings around trees at two scales,15 and 50 m,respectively.Although the signal was not apparent across the whole study region(or 25-ha),it is distinct on isolated areas with specific characteristics,suggesting that these characteristics could be important factors in CNDD.Further,we found that the gravity-dispersed tree species experienced CNDD across habitats,while for wind-dispersed species CNDD was found in gully,terrace and low-ridge habitats.Our study suggests that neglecting the habitat heterogeneity and dispersal mode can distort the signal of CNDD and community assembly in temperate forests.

Effect of nitrogen content on the microstructure and mechanical properties of titanium-bearing nonquenched and tempered steel after hot forging

The microstructure and mechanical properties of titanium(Ti)-bearing medium-carbon nonquenched and tempered steel with different nitrogen content before and after hot forging were investigated through smelting,forging,and laboratory tests.The results show that the grain size of nonquenched and tempered steel was gradually refined,and the ferrite content gradually increased with an increase in nitrogen content.The grain size of the material with low nitrogen content increased abnormally,and its impact properties significantly decreased after hot forging.The grain size of nonquenched and tempered steel with higher nitrogen content was slightly larger than that before forging,and the tensile and yield strength increased,but the impact toughness was not significantly reduced.The Ti-bearing nonquenched and tempered steel showed better strength and toughness after hot forging with the addition of 0.010%0.015%nitrogen.

Effect of low-temperature tempering on the mechanical properties of cold-rolled martensitic steel

Cold-rolled martensitic steel is an important type of advanced high-strength steel for automobile production.With martensite as its primary microstructure constituent, martensitic steel possesses exceptional high strength despite its low alloy content.As the strength of cold-rolled martensitic steel increases, the martensite and carbon content also increases, leading to a decrease in bending properties and toughness.In this paper, the effect of various tempering parameters on the bending property and impact toughness of a quenched cold-rolled martensitic steel sheet was studied.It is found that after quenching, the ductility and impact toughness of the experimental steel are improved using low-temperature heat treatment.The optimal tempering conditions for ductility and toughness are analyzed.

Effect of quenching and tempering processes on properties and microstructure of G115 steel

The novel martensitic heat-resistant steel G115 was designed for thick-section boiler components of ultra-supercritical(USC) power plants at 630-650 ℃.The impact of the quenching and tempering processes on the properties and microstructure of G115 steel was explored.The samples that were quenched and tempered twice had a higher tensile strength at room temperature and 650 ℃,and the impact energy was significantly improved.The strength and impact energy increased in proportion to the increase in the first quenching temperature.The microstructure differences between the single and double quenched and tempered samples were examined using metallographic microscopy and scanning electron microscopy.The grain size of the double quenched and tempered samples was finer than that of the single quenched and tempered samples, and the tempered martensite lath is more visible, as are the carbides and other precipitates, which are finer and more uniformly distributed.As the first quenching temperature increased, the grains became coarser but more uniform.

Tempered分数阶微分方程Nagumo型唯一解

本文重点讨论Tempered分数阶微分方程柯西问题Nagumo迭代近似值的唯一性和收敛性。首先把柯西问题转化成等价Volterra积分方程,证出解的唯一性。然后,运用迭代方法,我们将Nagumo型唯一性和迭代近似值序列扩展到Tempered分数阶微分方程。

Variation microstructure and properties of X80 pipeline steel in the rapid induction tempering process

A self-developed electromagnetic induction-heating device was used to investigate the variation in the microstructure and properties of X80 pipeline steel in the rapid induction tempering process at different process parameters. The effects of the tempering condition on toughness, microstructure, size and distribution of precipitates of X80 pipeline steel were observed using a metallographic microscopy and scanning electron microscopy. Compared with the samples prepared via traditional tempering techniques, results show that the samples prepared via rapid induction tempering had improved performances. When the heating temperature is 590 ℃, at a holding time of 90 s,it was found that acicular ferrite was refined, carbonite precipitation was small, and precipitates were evenly distributed in the matrix. The low-temperature impact energy, also known as the impact absorption energy, at -40 ℃ was found to be 430.5 J for the rapid induction tempering samples and 323.2 J for the traditionally tempered sample. The low-temperature impact energy at -60 ℃ was found to be 351.3 J for the rapid induction tempered sample and 312.1 J for the tradition tempering sample.

Tempering microstructure and mechanical properties of pipeline steel X80

The tempering microstructure and mechanical properties of X80 steel used for heating-bent pipe were analyzed. The results show that the microstructure of X80 steel tempered at 550 ℃ and 600 ℃ is bainitic ferrite (BF)+granular bainite (GB), and partial ferrite laths in BF merge and broaden. The interior sub-lath boundary of some GB begins to disappear due to merging, the M/A constituent (a mixture of martensite plus retained austenite) in GB is orbicular. At the two tempering temperatures the tested X80 steel shows a certain degree of tempering stability. After being tempered at 650 ℃, the microstructure of X80 steel is GB+quasi-polygonal ferrite(QF), and the original BF laths have merged to form smaller GB crystal grains. The reason is that the steel shows better match of strength and toughness. After being tempered at 700 ℃ , the microstructure of X80 steel is composed mainly of QF, which can improve the plasticity but decline severely the yield strength of X80, and the M/A constituent assembles and grows up at the grain boundary of QF, resulting in excellent lower low-temperature toughness of X80.

Analysis of microstructure and performance of temper bead welded joints for SA508-3 steel by Quenching and Tempering mode

The HAZ microstructure and performance of Quenching and Tempering mode temper bead welding and general welded joints which were made on SA508-3 steel of 60 mm thickness were compared in this article. The result shows that tempering sorbite which has excellent overall performance was obtained in both modes. The microstructure of Quenching and Tempering mode welded joints got more fine grain. Even though the hardness of tempering bead welded joints is higher than the general one,it still meets the standards which is lower than 350 HV. The impact absorbing energy of each district of tempering bead welded joints HAZ reached 170 J,which is equal to general one.

TEMPERED BAINITE EMBRITTLEMENT IN SOME STRUCTURAL STEELS

The variations of microstructures and mechanical properties of steels 15CrMnMoV, 18Mn2CrMoB,18Cr2Ni4W,30CrMnSi,30CrMnSiNi2 and 40CrMnSiMoV,which were tempered at different temperatures after austempering and continuous cooling at given rates, have been investigated.Based on the experimental results,the behaviour and mechanism of tempered bainite embrittlement(TBE)have been discussed.Finally,the theoretical and prac- tical basis for selecting the optimum tempering temperature of steels with bainite structure af- ter heat treatment are proposed.

Soil Carbon Dioxide Emission: Soil Respiration Measurement in Temperate Grassland, Nepal

Soil carbon dioxide emission: soil respiration is representing a major contributor of accumulating carbon dioxide in the atmosphere that aids to accelerate global warming and altering the climate. Soil temperature, soil water content, sun light and vegetation are considered most common regulators of soil respiration variations in ecosystem. The soil respiration was measured in grassland intended to examine how the soil respiration changed with varying climatic factors, for two years (2015 and 2016) in temperate grassland of Annapurna Conservation Area (ACA), Nepal. In the study, soil temperature accounted exponential function of soil respiration variation at 42.9%, 19.1% and 23.3%, and temperature sensitivity of the soil respiration (Q10) obtained at 6.2, 1.4 and 1.8 in October 2015 and April 2016 and both the measurements were combined, respectively. Significant negative (R2 = 0.50, p < 0.05, October 2015) and positive (R2 = 0.084, p < 0.05, April 2016) exponential function of soil respiration and soil water content were determined, where high soil respiration values were always measured between 30% and 35% of the soil water content. However, linear significant relationship was determined (R2 = 0.376, p < 0.05) between soil respiration and photosynthetic photon flux density (PPFD). Soil respiration value averaged in October 2015 was 357 mg CO2 m-2 h-1 and in April 2016 it was 444.6 mg CO2 m-2 h-1. Above- and below-ground plant biomasses were obtained at 231.1 g d w m-2 and 1538.8 g d w m-2 in October, and at 449.9 g d w m-2 and 349.0 g d w m-2 in April, respectively. This study showed variation of soil respiration in relation to the factors such as soil temperature, soil water content and photosynthetic photon flux density signifying their importance in governing ecosystem function and carbon balance of the temperate grassland ecosystem.

Fatty acids in microalgae and cyanobacteria in a changing world:Contrasting temperate and cold environments

Under the present changing climate conditions and the observed temperature increase,it is of high importance to understand its effects on aquatic microbial life,and organisms’adaptations at the biochemical level.To adjust to temperature or salinity stress and avoid cell damage,organisms alter their degree of fatty acids(FAs)saturation.Thus,temperature is expected to have strong effects on both the quantity and quality of FAs in aquatic microorganisms.Here we review some recent findings about FAs sensitivity to climate change in contrasting environments.Overall,heat waves may induce changes in the relative abundance of polyunsaturated FAs(PUFA).However,the impact of the exposure to warming waters is different in temperate and polar environments.In cold marine waters,high concentration of omega-3(ω3)FAs such as eicosapentaenoic acid(EPA)is promoted due to the activation of the desaturase enzyme.In this way,cells have enough energy to produce or activate antioxidant protection mechanisms and avoid oxidative stress due to heat waves.Contrastingly,under high irradiance and heat wave conditions in temperate environments,photosystems’protection is achieved by decreasing EPA concentration due to desaturase sensitivity.Essential FAs are transferred in aquatic food webs.Therefore,any alteration in the production of essential FAs by phytoplankton(the main source ofω3)due to climate warming can be transferred to higher trophic levels,with cascading effects for the entire aquatic ecosystem.

A Numerical Algorithm for the Caputo Tempered Fractional Advection-Diffusion Equation

By transforming the Caputo tempered fractional advection-diffusion equation into the Riemann–Liouville tempered fractional advection-diffusion equation,and then using the fractional-compact Grünwald–Letnikov tempered difference operator to approximate the Riemann–Liouville tempered fractional partial derivative,the fractional central difference operator to discritize the space Riesz fractional partial derivative,and the classical central difference formula to discretize the advection term,a numerical algorithm is constructed for solving the Caputo tempered fractional advection-diffusion equation.The stability and the convergence analysis of the numerical method are given.Numerical experiments show that the numerical method is effective.

Thermal Tempering Does Not Impact Rainbow Trout and Brown Trout Survival

Hatchery-reared fish are frequently adjusted (tempered) to the higher water temperatures present in the water bodies where they are to be stocked. This study was undertaken to determine the necessity of such tempering practices. This study used rainbow trout (Oncorhynchus mykiss) and brown trout (Salmo trutta) reared at 11.2°C. The first two trials for each species were designed to simultaneously determine the upper incipient lethal temperature and 100% lethal temperature over a 14-day period. The third trial for each species evaluated the effects of an exaggerated 12-hour tempering regime on fish survival after placement in elevated water temperatures. After transfer from a water temperature of 11.2°C, no rainbow trout survived at 26°C, and only 50% survived at 25°C. No brown trout survived at 22°C and only 50% at 20°C. Survival of rainbow trout was not improved by the 12-hour tempering regime where water temperatures were slowly increased from 11.2°C to either 25°C or 26°C. Similarly, tempering did not improve brown trout survival at either 20°C or 22°C. These results suggest that tempering is not needed when hatchery-reared trout are reared and stocked at the water temperatures within the range of those used in this study.

Litter decomposition and C and N dynamics as affected by N additions in a semi-arid temperate steppe, Inner Mongolia of China

Litter decomposition is the fundamental process in nutrient cycling and soil carbon（C） sequestration in terrestrial ecosystems. The global-wide increase in nitrogen（N） inputs is expected to alter litter decomposition and,ultimately, affect ecosystem C storage and nutrient status. Temperate grassland ecosystems in China are usually N-deficient and particularly sensitive to the changes in exogenous N additions. In this paper, we conducted a 1,200-day in situ experiment in a typical semi-arid temperate steppe in Inner Mongolia to investigate the litter decomposition as well as the dynamics of litter C and N concentrations under three N addition levels（low N with 50 kg N/（hm2？a）（LN）, medium N with 100 kg N/（hm2？a）（MN）, and high N with 200 kg N/（hm2？a）（HN）） and three N addition forms（ammonium-N-based with 100 kg N/（hm2？a） as ammonium sulfate（AS）, nitrate-N-based with 100 kg N/（hm2？a） as sodium nitrate（SN）, and mixed-N-based with 100 kg N/（hm2？a） as calcium ammonium nitrate（CAN）） compared to control with no N addition（CK）. The results indicated that the litter mass remaining in all N treatments exhibited a similar decomposition pattern： fast decomposition within the initial 120 days, followed by a relatively slow decomposition in the remaining observation period（120–1,200 days）. The decomposition pattern in each treatment was fitted well in two split-phase models, namely, a single exponential decay model in phase I（〈398 days） and a linear decay function in phase II（≥398 days）. The three N addition levels exerted insignificant effects on litter decomposition in the early stages（〈398 days, phase I; P〉0.05）. However, MN and HN treatments inhibited litter mass loss after 398 and 746 days, respectively（P〈0.05）. AS and SN treatments exerted similar effects on litter mass remaining during the entire decomposition period（P〉0.05）. The effects of these two N addition forms differed greatly from those of CAN after 746 and 1,053 days, respectively（P〈0.05）. During the decomposition period, N concentrations in the decomposing litter increased whereas C concentrations decreased, which also led to an exponential decrease in litter C：N ratios in all treatments. No significant effects were induced by N addition levels and forms on litter C and N concentrations（P〉0.05）. Our results indicated that exogenous N additions could exhibit neutral or inhibitory effects on litter decomposition, and the inhibitory effects of N additions on litter decomposition in the final decay stages are not caused by the changes in the chemical qualities of the litter, such as endogenous N and C concentrations. These results will provide an important data basis for the simulation and prediction of C cycle processes in future N-deposition scenarios.

Impact of nitrogen addition on plant community in a semi-arid temperate steppe in China

Increased nitrogen （N） deposition will often lead to a decline in species richness in grassland ecosystems but the shifts in functional groups and plant traits are still poorly understood in China. A field experiment was conducted at Duolun, Inner Mongolia, China, to investigate the effects of N addition on a temperate steppe ecosystem. Six N levels （0, 3, 6, 12, 24, and 48 g N/（m2-a）） were added as three applications per year from 2005 to 2010. Enhanced N deposition, even as little as 3 g N/（m2.a） above ambient N deposition （1.2 g N/（m2.a））, led to a decline in species richness of the whole community. Increasing N addition can significantly stimulate aboveground biomass of perennial bunchgrasses （PB） but decrease perennial forbs （PF）, and induce a slight change in the biomass of shrubs and semi-shrubs （SS）. The biomass of annuals （AS） and perennial rhizome grasses （PR） accounts for only a small part of the total biomass. Species richness of PF decreased significantly with increasing N addition rate but there was a little change in the other functional groups. PB, as the dominant functional group, has a relatively higher height than others. Differences in the response of each functional group to N addition have site-specific and species-specific characteristics. We initially infer that N enrichment stimulated the growth of PB, which further suppressed the growth of other functional groups.

Abiotic and biotic drivers of species diversity in understory layers of cold temperate coniferous forests in North China

Understory plants are important components of forest ecosystems and play a crucial role in regulating community structures,function realization,and community succession.However,little is known about how abiotic and biotic drivers affect the diversity of understory species in cold temperate coniferous forests in the semiarid climate region of North China.We hypothesized that(1)topographic factors are important environmental factors affecting the distribution and variation of understory strata,and(2)different understory strata respond differently to environmental factors;shrubs may be significantly affected by the overstory stratum,and herbs may be more affected by surface soil conditions.To test these hypotheses,we used the boosted regression tree method to analyze abiotic and biotic environmental factors that influence understory species diversity,using data from 280 subplots across 56 sites in cold temperate coniferous forests of North China.Elevation and slope aspect were the dominant and indirect abiotic drivers affecting understory species diversity,and individual tree size inequality(DBH variation)was the dominant biotic driver of understory species diversity;soil water content was the main edaphic factors affecting herb layers.Elevation,slope aspect,and DBH variation accounted for 36.4,14.5,and 12.1%,respectively,of shrub stratum diversity.Shrub diversity decreased with elevation within the range of altitude of this study,but increased with DBH variation;shrub diversity was highest on north-oriented slopes.The strongest factor affecting herb stratum species diversity was slope aspect,accounting for 25.9%of the diversity,followed by elevation(15.7%),slope(12.2%),and soil water content(10.3%).The highest herb diversity was found on southeast-oriented slopes and the lowest on northeast-oriented slopes;herb diversity decreased with elevation and soil water content,but increased with slope.The results of the study provide a reference for scientific management and biodiversity protection in cold temperate coniferous forests of North China.