Instrumented oscillographic study on impact toughness of an axle steel DZ2 with different tempering temperatures

Compared with the conventional Charpy impact test method,the oscillographic impact test can help in the behavioral analysis of materials during the fracture process.In this study,the trade-off relationship between the strength and toughness of a DZ2 axle steel at various tempering temperatures and the cause of the improvement in impact toughness was evaluated.The tempering process dramatically influenced carbide precipitation behavior,which resulted in different aspect ratios of carbides.Impact toughness improved along with the rise in tempering temperature mainly due to the increase in energy required in impact crack propagation.The characteristics of the impact crack propagation process were studied through a comprehensive analysis of stress distribution,oscilloscopic impact statistics,fracture morphology,and carbide morphology.The poor impact toughness of low-tempering-temperature specimens was attributed to the increased number of stress concentration points caused by carbide morphology in the small plastic zone during the propagation process,which resulted in a mixed distribution of brittle and ductile fractures on the fracture surface.

Grouping tree species to estimate basal area increment in temperate multispecies forests in Durango,Mexico

Multispecies forests have received increased scientific attention,driven by the hypothesis that biodiversity improves ecological resilience.However,a greater species diversity presents challenges for forest management and research.Our study aims to develop basal area growth models for tree species cohorts.The analysis is based on a dataset of 423 permanent plots(2,500 m^(2))located in temperate forests in Durango,Mexico.First,we define tree species cohorts based on individual and neighborhood-based variables using a combination of principal component and cluster analyses.Then,we estimate the basal area increment of each cohort through the generalized additive model to describe the effect of tree size,competition,stand density and site quality.The principal component and cluster analyses assign a total of 37 tree species to eight cohorts that differed primarily with regard to the distribution of tree size and vertical position within the community.The generalized additive models provide satisfactory estimates of tree growth for the species cohorts,explaining between 19 and 53 percent of the total variation of basal area increment,and highlight the following results:i)most cohorts show a"rise-and-fall"effect of tree size on tree growth;ii)surprisingly,the competition index"basal area of larger trees"had showed a positive effect in four of the eight cohorts;iii)stand density had a negative effect on basal area increment,though the effect was minor in medium-and high-density stands,and iv)basal area growth was positively correlated with site quality except for an oak cohort.The developed species cohorts and growth models provide insight into their particular ecological features and growth patterns that may support the development of sustainable management strategies for temperate multispecies forests.

Carbon,nitrogen and phosphorus stoichiometry in Pinus tabulaeformis forest ecosystems in warm temperate Shanxi Province,north China

Although carbon(C), nitrogen(N), and phosphorous(P) stoichiometric ratios are considered good indicators of nutrient excess/limitation and thus of ecosystem health, few reports have discussed the trends and the reciprocal effects of C:N:P stoichiometry in plant–litter–soil systems. The present study analyzed C:N:P ratios in four age groups of Chinese pine, Pinus tabulaeformis Carr., forests in Shanxi Province, China: plantation young forests(AY,<20 year-old); plantation middle-aged forests(AM, 21–30 year-old); natural young forests(NY,<30 year-old); and natural middle-aged forests(NM,31–50 year-old). The average C:N:P ratios calculated for tree, shrub, and herbaceous leaves, litter, and soil(0–100 cm) were generally higher in NY followed by NM,AM, and AY. C:N and C:P ratios were higher in litter than in leaves and soils, and reached higher values in the litter and leaves of young forests than in middle-aged forests;however, C:N and C:P ratios were higher in soils of middle-aged forests than in young forests. N:P ratios were higher in leaves than in litter and soils regardless of stand age; the consistent N:P<14 values found in all forests indicated N limitations. With plant leaves, C:P ratios were highest in trees, followed by herbs and shrubs, indicating a higher efficiency in tree leaf formation. C:N ratios decreased with increasing soil depth, whereas there was no trend for C:P and N:P ratios. C:N:P stoichiometry of forest foliage did not exhibit a consistent variation according to stand age. Research on the relationships between N:P, and P, N nutrient limits and the characteristics of vegetation nutrient adaptation need to be continued.

Ecosystem carbon storage and sink/source of temperate forested wetlands in Xiaoxing’anling, northeast China

Wetlands play an important role in the global carbon cycle, but there are still considerable uncertainties in the estimation of wetland carbon storage and a dispute on whether wetlands are carbon sources or carbon sinks. Xiaoxing’anling are one of several concentrated distribution areas of forested wetland in China, but the carbon storage and carbon sink/source of forested wetlands in this area is unclear. We measured the ecosystem carbon storage (vegetation and soil), annual net carbon sequestration of vegetation and annual carbon emissions of soil heterotrophic respiration of five typical forested wetland types (alder swamp, white birch swamp, larch swamp, larch fen, and larch bog) distributed along a moisture gradient in this area in order to reveal the spatial variations of their carbon storage and quantitatively evaluate their position as carbon sink or source according to the net carbon balance of the ecosystems. The results show that the larch fen had high carbon storage (448.8 t ha^(−1)) (6.8% higher than the larch bog and 10.5–30.1% significantly higher than other three wetlands (P < 0.05), the white birch swamp and larch bog were medium carbon storage ecosystems (406.3 and 420.1 t ha^(−1)) (12.4–21.8% significantly higher than the other two types (P < 0.0 5), while the alder swamp and larch swamp were low in carbon storage (345.0 and 361.5 t ha^(−1), respectively). The carbon pools of the five wetlands were dominated by their soil carbon pools (88.5–94.5%), and the vegetation carbon pool was secondary (5.5–11.5%). At the same time, their ecosystem net carbon balances were positive (0.1–0.6 t ha^(−1) a^(−1)) because the annual net carbon sequestration of vegetation (4.0–4.5 t ha^(−1) a^(−1)) were higher than the annual carbon emissions of soil heterotrophic respiration (CO_(2) and CH_(4)) (3.8–4.4 t ha^(−1) a^(−1)) in four wetlands, (the alder swamp being the exception), so all four were carbon sinks while only the alder swamp was a source of carbon emissions (− 2.1 t ha^(−1) a^(−1)) due to a degraded tree layer. Our results demonstrate that these forested wetlands were generally carbon sinks in the Xiaoxing’anling, and there was obvious spatial variation in carbon storage of ecosystems along the moisture gradient.

Seasonal evolution of the englacial and subglacial drainage systems of a temperate glacier revealed by hydrological analysis

Englacial and subglacial drainage systems of temperate glaciers have a strong influence on glacier dynamics, glacier-induced floods, glacier-weathering processes, and runoff from glacierized drainage basins. Proglacial discharge is partly controlled by the geometry of the glacial drainage network and by the process of producing meltwater. The glacial-drainage system of some alpine glaciers has been characterized using a model based on proglacial discharge analysis. In this paper, we apply cross-correlation analysis to hourly hydro-climatic data collected from China＇s Hailuogou Glacier, a typical temperate glacier in Mt. Gongga, to study the seasonal status changes of the englacial and subglacial drainage systems by discharge-temperature （Q-T） time lag analy-sis. During early ablation season （April-May） of 2003, 2004 and 2005, the change of englacial and subglacial drainage system usually leads several outburst flood events, which are also substantiated by observing the leakage of supraglacial pond and cre-vasses pond water during field works in April, 2008. At the end of ablation season （October-December）, the glacial-drainage net-works become less hydro-efficient. Those events are evidenced by hourly hydro-process near the terminus of Hailuogou Glacier, and the analysis of Q-T time lags also can be a good indicator of those changes. However, more detailed observations or experi-ments, e.g. dye-tracing experiment and recording borehole water level variations, are necessary to describe the evolutionary status and processes of englacial and subglacial drainage systems evolution during ablation season.

A RESEARCH ON THE DYNAMIC MONITORING SYSTEM FOR FORAGE-LIVESTOCK BALANCE IN THE TEMPERATE CRASSLAND OF CHINA

Some principles and methods for the dynamic monitoring of forage-livestock bal-ance in the grazing system on the temperate grassland of China were discussed in thispaper. To prepare a dynamic monitoring system or the forage livestock balance of grazingrangeland system, the following theoretical bases will be observed in this work.

Response of CO2 Emissions to the Change of Major Environmental Factors in a Temperate Grassland Ecosystem

Using dark enclosed chamber technique, CO2 fluxes from meadow, Leymus chinensis grasslandand Stipa grandis grassland and major environmental factors were measured in Xilin RiverBasin of Inner Mongolia under abnormally dry circumstances during June to September2001, when rainfall was less than 1/6 of that in normal years. Results showed the diurnalvariation of CO2 flux was significantly positively correlated with the earths surfacetemperature and air temperature. As to the response of the fluxes of CO2 to annualprecipitation, the average CO2 emission decreased from 268.7, 211.6 to 181.4 mg m-2 h-1 inmeadow, Leymus chinensis grassland and Stipa grandis grassland, respectively, with adecrease in annual precipitation. Therefore precipitation was an important environmentalfactor influencing CO2 flux from grassland. We also found close positively correlationbetween CO2 emissions and soil water content, organic content and total nitrogen contentin different soil layers. However, there was little correlation between the monthlyfluctuation of CO2 emissions with air temperature, topsoil temperature and soil temperaturesat 5 and 10cm soil depth.

Numerical Simulation of Stress Field in Physical Tempering Process of Flat Soda Lime Silica Glass

Based on the analysis of different theory for glass tempering process,the“structural theory”with stress relaxation and structural relaxation effects was selected to investigate the tempering of flat glass quantificationally.The geometrical model with small size and non-homogeneous mesh were considered to build the finite element models according to the characteristics of stress field.The tempering process of flat glass with12 mm thickness was calculated with the verified finite element model.The transient and permanent stress of the central area,edge and corner end of the flat glass are obtained and analyzed.From the calculation results of basic case,the transient tensile stress at the upper surface of the central area,the center point of edge,the edge of edge,the edge of corner were 14.30,18.94,40.76 and 34.75 MPa,respectively.The transient tensile stress at these points were dangerous to promote the glass to break during the tempering.In addition,the point at the diagonal line of symmetry plane in the thickness direction,which is 14 mm from corner,has the maximum permanent tensile stress about 70.01 MPa in the flat glass after tempering.Thus,it is indicated that the corner is the weakest region in the tempered glass.

Three-dimensional assessment of movement patterns of Sichuan snub-nosed monkeys affected by habitat structure in temperate forests

DEAR EDITOR,Movement patterns can reflect species-specific characteristics of individuals and animal groups at a given scale. Accurate three-dimensional(3D) assessment can quantify the relationship between movement patterns of an animal and its unique habitat. Here, we evaluated the effects of habitat structure on movement patterns of the golden snub-nosed monkey(Rhinopithecus roxellana). We used airborne light detection and ranging(LiDAR) to map the 3D structure of the temperate forest in the Qinling Mountains(Shaanxi, China).

Trees species’ dispersal mode and habitat heterogeneity shape negative density dependence in a temperate forest

Conspecific negative density dependence(CNDD)is a potentially important mechanism in maintaining species diversity.While previous evidence showed habitat heterogeneity and species’dispersal modes affect the strength of CNDD at early life stages of trees(e.g.,seedlings),it remains unclear how they affect the strength of CNDD at later life stages.We examined the degree of spatial aggregation between saplings and trees for species dispersed by wind and gravity in four topographic habitats within a 25-ha temperate forest dynamic plot in the Qinling Mountains of central China.We used the replicated spatial point pattern(RSPP)analysis and bivariate paircorrelation function(PCF)to detect the spatial distribution of saplings around trees at two scales,15 and 50 m,respectively.Although the signal was not apparent across the whole study region(or 25-ha),it is distinct on isolated areas with specific characteristics,suggesting that these characteristics could be important factors in CNDD.Further,we found that the gravity-dispersed tree species experienced CNDD across habitats,while for wind-dispersed species CNDD was found in gully,terrace and low-ridge habitats.Our study suggests that neglecting the habitat heterogeneity and dispersal mode can distort the signal of CNDD and community assembly in temperate forests.

Effect of nitrogen content on the microstructure and mechanical properties of titanium-bearing nonquenched and tempered steel after hot forging

The microstructure and mechanical properties of titanium(Ti)-bearing medium-carbon nonquenched and tempered steel with different nitrogen content before and after hot forging were investigated through smelting,forging,and laboratory tests.The results show that the grain size of nonquenched and tempered steel was gradually refined,and the ferrite content gradually increased with an increase in nitrogen content.The grain size of the material with low nitrogen content increased abnormally,and its impact properties significantly decreased after hot forging.The grain size of nonquenched and tempered steel with higher nitrogen content was slightly larger than that before forging,and the tensile and yield strength increased,but the impact toughness was not significantly reduced.The Ti-bearing nonquenched and tempered steel showed better strength and toughness after hot forging with the addition of 0.010%0.015%nitrogen.

Effect of low-temperature tempering on the mechanical properties of cold-rolled martensitic steel

Cold-rolled martensitic steel is an important type of advanced high-strength steel for automobile production.With martensite as its primary microstructure constituent, martensitic steel possesses exceptional high strength despite its low alloy content.As the strength of cold-rolled martensitic steel increases, the martensite and carbon content also increases, leading to a decrease in bending properties and toughness.In this paper, the effect of various tempering parameters on the bending property and impact toughness of a quenched cold-rolled martensitic steel sheet was studied.It is found that after quenching, the ductility and impact toughness of the experimental steel are improved using low-temperature heat treatment.The optimal tempering conditions for ductility and toughness are analyzed.

Effect of quenching and tempering processes on properties and microstructure of G115 steel

The novel martensitic heat-resistant steel G115 was designed for thick-section boiler components of ultra-supercritical(USC) power plants at 630-650 ℃.The impact of the quenching and tempering processes on the properties and microstructure of G115 steel was explored.The samples that were quenched and tempered twice had a higher tensile strength at room temperature and 650 ℃,and the impact energy was significantly improved.The strength and impact energy increased in proportion to the increase in the first quenching temperature.The microstructure differences between the single and double quenched and tempered samples were examined using metallographic microscopy and scanning electron microscopy.The grain size of the double quenched and tempered samples was finer than that of the single quenched and tempered samples, and the tempered martensite lath is more visible, as are the carbides and other precipitates, which are finer and more uniformly distributed.As the first quenching temperature increased, the grains became coarser but more uniform.

Tempered分数阶微分方程Nagumo型唯一解

本文重点讨论Tempered分数阶微分方程柯西问题Nagumo迭代近似值的唯一性和收敛性。首先把柯西问题转化成等价Volterra积分方程,证出解的唯一性。然后,运用迭代方法,我们将Nagumo型唯一性和迭代近似值序列扩展到Tempered分数阶微分方程。

Abiotic and biotic drivers of species diversity in understory layers of cold temperate coniferous forests in North China

Understory plants are important components of forest ecosystems and play a crucial role in regulating community structures,function realization,and community succession.However,little is known about how abiotic and biotic drivers affect the diversity of understory species in cold temperate coniferous forests in the semiarid climate region of North China.We hypothesized that(1)topographic factors are important environmental factors affecting the distribution and variation of understory strata,and(2)different understory strata respond differently to environmental factors;shrubs may be significantly affected by the overstory stratum,and herbs may be more affected by surface soil conditions.To test these hypotheses,we used the boosted regression tree method to analyze abiotic and biotic environmental factors that influence understory species diversity,using data from 280 subplots across 56 sites in cold temperate coniferous forests of North China.Elevation and slope aspect were the dominant and indirect abiotic drivers affecting understory species diversity,and individual tree size inequality(DBH variation)was the dominant biotic driver of understory species diversity;soil water content was the main edaphic factors affecting herb layers.Elevation,slope aspect,and DBH variation accounted for 36.4,14.5,and 12.1%,respectively,of shrub stratum diversity.Shrub diversity decreased with elevation within the range of altitude of this study,but increased with DBH variation;shrub diversity was highest on north-oriented slopes.The strongest factor affecting herb stratum species diversity was slope aspect,accounting for 25.9%of the diversity,followed by elevation(15.7%),slope(12.2%),and soil water content(10.3%).The highest herb diversity was found on southeast-oriented slopes and the lowest on northeast-oriented slopes;herb diversity decreased with elevation and soil water content,but increased with slope.The results of the study provide a reference for scientific management and biodiversity protection in cold temperate coniferous forests of North China.

Litter decomposition and C and N dynamics as affected by N additions in a semi-arid temperate steppe, Inner Mongolia of China

Litter decomposition is the fundamental process in nutrient cycling and soil carbon（C） sequestration in terrestrial ecosystems. The global-wide increase in nitrogen（N） inputs is expected to alter litter decomposition and,ultimately, affect ecosystem C storage and nutrient status. Temperate grassland ecosystems in China are usually N-deficient and particularly sensitive to the changes in exogenous N additions. In this paper, we conducted a 1,200-day in situ experiment in a typical semi-arid temperate steppe in Inner Mongolia to investigate the litter decomposition as well as the dynamics of litter C and N concentrations under three N addition levels（low N with 50 kg N/（hm2？a）（LN）, medium N with 100 kg N/（hm2？a）（MN）, and high N with 200 kg N/（hm2？a）（HN）） and three N addition forms（ammonium-N-based with 100 kg N/（hm2？a） as ammonium sulfate（AS）, nitrate-N-based with 100 kg N/（hm2？a） as sodium nitrate（SN）, and mixed-N-based with 100 kg N/（hm2？a） as calcium ammonium nitrate（CAN）） compared to control with no N addition（CK）. The results indicated that the litter mass remaining in all N treatments exhibited a similar decomposition pattern： fast decomposition within the initial 120 days, followed by a relatively slow decomposition in the remaining observation period（120–1,200 days）. The decomposition pattern in each treatment was fitted well in two split-phase models, namely, a single exponential decay model in phase I（〈398 days） and a linear decay function in phase II（≥398 days）. The three N addition levels exerted insignificant effects on litter decomposition in the early stages（〈398 days, phase I; P〉0.05）. However, MN and HN treatments inhibited litter mass loss after 398 and 746 days, respectively（P〈0.05）. AS and SN treatments exerted similar effects on litter mass remaining during the entire decomposition period（P〉0.05）. The effects of these two N addition forms differed greatly from those of CAN after 746 and 1,053 days, respectively（P〈0.05）. During the decomposition period, N concentrations in the decomposing litter increased whereas C concentrations decreased, which also led to an exponential decrease in litter C：N ratios in all treatments. No significant effects were induced by N addition levels and forms on litter C and N concentrations（P〉0.05）. Our results indicated that exogenous N additions could exhibit neutral or inhibitory effects on litter decomposition, and the inhibitory effects of N additions on litter decomposition in the final decay stages are not caused by the changes in the chemical qualities of the litter, such as endogenous N and C concentrations. These results will provide an important data basis for the simulation and prediction of C cycle processes in future N-deposition scenarios.

Impact of nitrogen addition on plant community in a semi-arid temperate steppe in China

Increased nitrogen （N） deposition will often lead to a decline in species richness in grassland ecosystems but the shifts in functional groups and plant traits are still poorly understood in China. A field experiment was conducted at Duolun, Inner Mongolia, China, to investigate the effects of N addition on a temperate steppe ecosystem. Six N levels （0, 3, 6, 12, 24, and 48 g N/（m2-a）） were added as three applications per year from 2005 to 2010. Enhanced N deposition, even as little as 3 g N/（m2.a） above ambient N deposition （1.2 g N/（m2.a））, led to a decline in species richness of the whole community. Increasing N addition can significantly stimulate aboveground biomass of perennial bunchgrasses （PB） but decrease perennial forbs （PF）, and induce a slight change in the biomass of shrubs and semi-shrubs （SS）. The biomass of annuals （AS） and perennial rhizome grasses （PR） accounts for only a small part of the total biomass. Species richness of PF decreased significantly with increasing N addition rate but there was a little change in the other functional groups. PB, as the dominant functional group, has a relatively higher height than others. Differences in the response of each functional group to N addition have site-specific and species-specific characteristics. We initially infer that N enrichment stimulated the growth of PB, which further suppressed the growth of other functional groups.

Precipitation behavior and martensite lath coarsening during tempering of T/P92 ferritic heat-resistant steel

Tempering is an important process for T/P92 ferritic heat-resistant steel from the viewpoint of microstructure control, as it facili- tates the formation of final tempered martensite under serving conditions. In this study, we have gained deeper insights on the mechanism underlying the microstructural evolution during tempering treatment, including the precipitation of carbides and the coarsening of martensite laths, as systematically analyzed by optical microscopy, transmission electron microscopy, and high-resolution transmission electron mi- croscopy. The chemical composition of the precipitates was analyzed using energy dispersive X-ray spectroscopy. Results indicate the for- mation of M3C （cementite） precipitates under normalized conditions. However, they tend to dissolve within a short time of tempering, owing to their low thermal stability. This phenomenon was substantiated by X-ray diffraction analysis. Besides, we could observe the precipitation of fine carbonitrides （MX） along the dislocations. The mechanism of carbon diffusion controlled growth of M23C6 can be expressed by the Zener＇s equation. The movement of Y-junctions was determined to be the fundamental mechanism underlying the martensite lath coarsening process. Vickers hardness was estimated to determine their mechanical properties. Based on the comprehensive analysis of both the micro- structural evolution and hardness variation, the process of tempering can be separated into three steps.

Harmonic Current′s Coupling Effect on the Main Motion of Temper Mill Set

The paper probes into a probable condition that causes temper mill chatter from aspect of electromechanical coupling of complex electromechanical system, and mainly studies the effect of temper mill electrical driving system harmonic current on the main motion of temper mill set. Aiming at the electrical driving system of CM04 temper mill, the effect of harmonic current is analyzed and evaluated according to different load. Combining the features of CM04 temper mill′s structure and its working state, the paper discusses in every detail how the harmonic current in main circuit, which can be regarded as a disturbance via feedback control circuit , influences main motion of temper mill set.