Evaluation of surface temperature and pressure derived from MERRA-2 and ERA5 reanalysis datasets and their applications in hourly GNSS precipitable water vapor retrieval over China

Temperature and pressure play key roles in Global Navigation Satellite System(GNSS) precipitable water vapor(PWV) retrieval. The National Aeronautics and Space Administration(NASA) and European Center for Medium-Range Weather Forecasts(ECMWF) have released their latest reanalysis product: the modern-era retrospective analysis for research and applications, version 2(MERRA-2) and the fifthgeneration ECMWF reanalysis(ERA5), respectively. Based on the reanalysis data, we evaluate and analyze the accuracy of the surface temperature and pressure products in China using the the measured temperature and pressure data from 609 ground meteorological stations in 2017 as reference values.Then the accuracy of the two datasets and their performances in estimating GNSS PWV are analyzed. The PWV derived from the pressure and temperature products of ERA5 and MERRA-2 has high accuracy. The annual average biases of pressure and temperature for ERA5 are-0.07 hPa and 0.45 K, with the root mean square error(RMSE) of 0.95 hPa and 2.04 K, respectively. The annual average biases of pressure and temperature for MERRA-2 are-0.01 hPa and 0.38 K, with the RMSE of 1.08 h Pa and 2.66 K, respectively.The accuracy of ERA5 is slightly higher than that of MERRA-2. The two reanalysis data show negative biases in most regions of China, with the highest to lowest accuracy in the following order: the south,north, northwest, and Tibet Plateau. Comparing the GNSS PWV calculated using MERRA-2(GNSS MERRA-2 PWV) and ERA5(GNSS ERA5 PWV) with the radiosonde-derived PWV from 48 co-located GNSS stations and the measured PWV of the co-location radiosonde stations, it is found that the accuracy of GNSS ERA5 PWV is better than that of GNSS MERRA-2 PWV. These results show the different applicability of surface temperature and pressure products from MERRA-2 and ERA5 data, indicating that both have important applications in meteorological research and GNSS water vapor monitoring in China.

Mechanical properties of Ga_xIn_(1-x)As_yP_(1-y)/GaAs system at different temperatures and pressures

The mechanical properties, such as the elastic constants C11, C12, C44, and bulk, Young＇s, and shear moduli, of a Ga x In1-x As y P1-y alloy lattice matching to a Ga As substrate are calculated for various As concentrations. The calculations are based on the pseudo-potential method within the virtual crystal approximation containing the effective disorder potential. The variations of the studied properties with pressure and temperature are investigated. A comparison between the calculated results and the available published data for binary parent compounds shows that they have good agreement,while the calculated results for the quaternary alloys at various temperature and pressure may be taken as a reference.

FBG Temperature and Pressure Sensing System for Hot Water Pipeline of Petrochemical Factory

A spatial and wavelength division multi- plexing fiber Bragg grating （FBG） sensing system is reported for monitoring the temperature and the pressure （T-P） of hot water pipeline in petrochemieal factory. The FBG sensing system has 72 channels independently, and it provides the capability to monitor large number sensors at same time. A resolution of 0.1℃ and 0.01 MPa with a measurement bandwidth of 150 Hz has been achieved.

Adsorption mechanism of different coal ranks under variable temperature and pressure conditions

Variable temperature and pressure adsorption tests were conducted on four coal samples with different coal ranks, under simulated temperatures and pressures corresponding to coal reservoirs at different depths. The regularity of the variation in the amounts of adsorption by coals under variable temperature and pressure and 30 ℃ isothermal conditions are compared and the adsorption characteristics of coal under the composite effect of temperature and pressure were obtained. The adsorption test and data processing method of coal under variable temperature and pressure are presented and the effect of the mechanism of temperature and pressure on the adsorption capacity of coal has been studied. The research results are of significant importance in the investigation of coalbed methane storage mechanism and for the prediction of the amounts of coalbed methane at various depths.

Novel-structured Mo-Cu-Fe-O composite for catalytic air oxidation of dye-containing wastewater under ambient temperature and pressure

A novel‐structured Mo‐Cu‐Fe‐O composite was successfully prepared by co‐precipitation and impregnation method.The properties of the as‐prepared samples were determined using X‐ray diffraction,temperature‐programmed reduction by H2,cyclic voltammetry,and temperature‐programmed desorption by O2.The results showed that Mo6+diffused into the Cu‐Fe‐O crystal lattice and then formed a new crystalline phase of CuMoO4.The Mo‐Cu‐Fe‐O catalyst had redox properties,and its surface contained active sites for oxygen adsorption.In addition,the catalytic activity of the Mo‐Cu‐Fe‐O composite was evaluated by the degradation of Cationic Red GTL,Crystal Violet,and Acid Red in catalytic wet air oxidation(CWAO)at ambient temperature and pressure.The Mo‐Cu‐Fe‐O catalyst showed excellent activity at basic conditions for the degradation of Cationic Red GTL.High removal efficiencies of91.5%and92.8%were achieved for Cationic Red GTL and Crystal Violet,respectively,in wastewater,and the efficiency remained high after seven cycles.However,almost no degradation of Acid Red occurred in the CWAO process.Furthermore,hydroxyl radicals were formed in the CWAO process,which induced the decomposition of the two cationic dyes in wastewater,and the toxicity of their effluents was decreased after degradation.The results indicate that the Mo‐Cu‐Fe‐O composite shows excellent catalytic activity for the treatment of wastewater contaminated with cationic dyes.

Preliminary Statistics of Temperatures and Pressures for Formation of Eclogites,Granulites and Peridotites in China

The rock forming temperatures and pressures represent the p T points of the local regions in the lithosphere at a certain age, providing some important information on rock formation. Based on the preliminary statistics on the temperatures and pressures for the formation of eclogites, granulites and peridotites in China, the variant ranges are given, in this paper, of temperatures, pressures and linear geothermal gradients of eclogites, granulites and peridotites. In addition, since the eclogite is different from granulite and peridotite in the p T diagram, these three rocks can be classified into two groups: the first group includes eclogites and the second group granulites and peridotites. Then, the p T correlation functions of these two groups of rocks are provided. Finally, the two groups of rocks have different geothermal gradients at the same pressure gradient or have different pressure gradients at the same geothermal gradient. The temperatures and pressures for the formation of the rocks can be calculated from the mineral chemical compositions, but the depths ( H ) for the rock formation can be calculated only under the hypotheses of given p H (or T H ) correlation functions. The explanations for the ultrahigh pressure metamorphism vary obviously with different hypotheses.

Experimental Study on Water-rock Reactions with CO2 Fluid in a Deep Sandstone Formation under High Temperature and Pressure

Qiongdongnan Basin has a tectonic geological background of high temperature and high pressure in a deep reservoir setting,with mantle-derived CO2.A water-rock reaction device was used under high temperature and high pressure conditions,in conjunction with scanning electron microscope(SEM)observations,to carry out an experimental study of the diagenetic reaction between sandstone at depth and CO2-rich fluid,which is of great significance for revealing the dissolution of deep clastic rock reservoirs and the developmental mechanism of secondary pores,promoting deep oil and gas exploration.In this study,the experimental scheme of the water-rock reaction system was designed according to the parameters of the diagenetic background of the deep sandstone reservoir in the Qiongdongnan Basin.Three groups of single mineral samples were prepared in this experiment,including K-feldspar samples,albite samples and calcite samples.Using CO2 as a reaction solution,a series of diagenetic reaction simulation experiments were carried out in a semi-closed high temperature and high pressure simulation system.A field emission scanning electron microscope(SEM)was used to observe the microscopic appearance of the mineral samples after the water-rock reaction,the characteristics of dissolution under high temperature and high pressure,as well as the development of secondary pores.The experimental results showed that the CO2-rich fluid has an obvious dissolution effect on K-feldspar,albite and calcite under high temperature and high pressure.For the three minerals,the main temperature and pressure window for dissolution ranged from 150℃to 300℃and 45 MPa to 60 MPa.Scanning electron microscope observations revealed that the dissolution effect of K-feldspar is most obvious under conditions of 150℃and 45 MPa,in contrast to conditions of200℃and 50 MPa for albite and calcite.Through the comparative analysis of experimental conditions and procedures,a coupling effect occurred between the temperature and pressure change and the dissolution strength and calcite.Under high temperature and high pressure,pressure changed the solubility of CO2,furthermore,the dissolution effect and strength of the sandstone components were also affected.The experiment revealed that high temperature and high pressure conditions with CO2-rich fluid has a significant dissolution effect on aluminosilicate minerals and is conducive to the formation of secondary pores and effective reservoirs.Going forward with the above understanding has important implications for the promotion of deep oil and gas exploration.

Effect of Different Pretreatments on Explosion Puffing Drying of Hami Melon at Modified Temperature and Pressure in Xinjiang

This paper studies the influence of three different pretreatments( blanching,citric acid soaking,and Na Cl soaking) on the moisture content,degree of puffing,color,hardness and crispness of Hami melon under explosion puffing drying at modified temperature and pressure in Xinjiang. The results show that using 60 s blanching pretreatment can help to reduce the moisture content of puffed product while maintaining product color; 2. 5% citric acid pretreatment can make products maintain high degree of puffing and crispness,but reduce product color; 2%Na Cl penetrating fluid plays a significant role in maintaining product color,while maintaining crispness.

Damage Characteristics Analysis and Fractal Study of Shale With Prefabricated Fractures under Thermal-mechanical Coupling

To study the damage and failure of shale with different fracture inclination angles under uniaxial compression loading,in this work,RFPA2D-Thermal,a two-dimensional real failure process analysis software,was used for numerical simulation.Numerical simulation results show that quartz in shale mainly affects the tensile and compressive strength of shale by increasing rock brittleness.The coupling of temperature and pressure will cause lateral and volume destruction of shale,which enables the shale body to be more easily broken.Fracture inclination is the key factor affecting shale damage patterns.The failure mode of shale with low-and high-angle fractures is mainly shear failure,and the compressive strength does not vary with crack inclination.The damage mode of obliquely intersecting fractured shale is slip damage along the fracture face,the compressive strength decreases and then increases with the fracture inclination,and a minimum value exists.The acoustic emission simulation results of the damage process effectively reflect the accumulated internal damage and macroscopic crack appearance until fracture instability when the prefabricated fractured shale is subjected to uniaxial compressive loading.The crack inclinations of 0°and 120℃ corresponds to the most complex"N"shape damage mode.The crack inclinations of 30°and 60°,and the damage mode is an inverted"λ"shape.

Studies of electrical properties of rocks under high temperature and pressure

Studies of the rocks′ electrical properties under high temperature and pressure have found favors in the geophysicist′s eyes, because those studies are becoming to be the important methods to understand the earth′s interior materials, their migration and evolution. This article introduces the development and significant of those studies from the measurements, instruments and affections, etc .

Geochemistry of Ore Fluids and Rb-Sr Isotopic Dating for the Wulong Gold Deposit in Liaoning, China

On the basis of detailed geological studies of the Wulong gold deposit, three metallogenic stages can be identified. With quartz fluid inclusions as an object of study, the authors investigated phase characteristics, compositional variations, temperature and pressure changes, fluid evolution, Pb isotope tracing and Rb-Sr isotopic dating of fluid inclusions entrapped in the above three metallogenic stages. The results show that Na+ is decreased obviously with metallogenic evolution, while K+ and other cations and gas compositions (H2, CO, CH4 and CO2) are increased slightly, and that the temperature and salinity vary in a pulsating manner along with the metallogenic evolution. Inverse calculation of hydrogen and oxygen isotopes indicate that at the first metallogenic stage the fluids were magmatic water, at the second stage they were dominated by magmatic water with a minor amount of meteoric water involved, and at the third stage, i.e., the final stage of metallogenesis, the fluids were composed completely of meteoric water. Its Pb isotopic composition implicates that the ore lead has some affinities with the lead in the Sanguliu granite, but the linear array of the ore-lead isotopic data reflects a mixing source of two end members. It can be deduced that the ore-forming materials and magma were both derived mainly from the same magma source region at depths. The Rb-Sr isotopic ages of the fluid inclusions are 112.2±3.2 Ma, indicating that the Wulong gold deposit was formed during the Yanshanian period.

Equilibrium between Clinopyroxene and Host Rocks:Implication for the Magmatic Source and Evolution of Alkali Basalts of the Taohekou Formation in the Northern Daba Mountains,China

The Taohekou Formation is a volcanic-sedimentary terrane formed in the early Silurian in the northern Daba Mountains, China. The volcanic rocks, with dominant alkali basalts and minor mantle xenoliths, are enriched in clinopyroxene phenocrysts. Geochemical analysis shows that the composition of clinopyroxenes from different lithofacies has a close affinity. There is a liner correlation present in composition of clinopyroxenes （including phenocryst, microcrystal and xenocryst） from coarse porphyritic basalts, pillow or fine porphyritic basalts to amygdaloidal basalts. All the cllnopyroxenes, except the clinopyroxenes in mantle xenoliths, show a similar pattern of trace elements and REE, which indicates that they are likely products of successive fractional crystallization from cognate magma. Clinopyroxenes in mantle xenoliths, however, are mantle xenocrysts. The crystallization pressure of clinopyroxenes gradually decreases from mantle xenolith, deep-seated xenocryst, coarse porphritic basalts, pillow or fine porphritic basalts, to amygdaloidal basalts, which are 1.92-4.41 GPa, 1.18-2.36 GPa, 1.13-2.05 GPa, 0.44-0.62 GPa and 0.14-0.28 GPa respectively. Calculation results suggest that the primary magma originated from a mantle region deeper than 68 km and stagnates in intervals of 37-68 kin, 15-20 km and 5-9 km during its ascent. The alkali basalts are characterized by increasing concentrations of Si and alkaline with the magmatic evolution. Meanwhile, they are markedly enriched in LREE, and the patterns of trace elements and REE are similar to those of oceanic island basalts.

Research and application of thermal insulation effect of natural gas hydrate freezing corer based on the wireline-coring principle

Natural gas hydrate(NGH)holds great promise as a source of clean energy.It is critical for acquiring the largest possible in situ NGH core for NGH eigen features and resource assessment.However,the existing NGH coring technology has limitations,such as temperature increments,limited coring diameters,low coring rates,and complex coring structures.Therefore,this study designs and proposes an NGH freezing coring(NGHFC)method and verifies the freezing and coring capacities of the NGHFC method in laboratories and experimental wells.Results suggest that NGHFC shows good freezing and heat-retention properties.A freezing core heat transfer model is developed.According to the actual air temperature and operating time,the optimum initial temperature of the cold source can be determined using this model.The average coring rate of NGHFC can reach 77.86%.The research results will provide a new idea of coring gas hydrates.

Temperature influence on macro-mechanics parameter of intact coal sample containing original gas from Baijiao Coal Mine in China

Investigation of temperature effect on mechanical parameters of coal is very important for understanding the mechanical response of coal bed at high temperature.It is especially benefcial for mitigating the thermal-induced disasters occurred in those coal mines suffering from heat hazard.In this work,coal samples,obtained from the No.2442 working face of Baijiao Coal Mine,were subjected to uniaxial compression ranging from 20 to 40℃ with an interval of 5℃.The apparatus used was designed to obtain deformation of a stressed sample,as well as the emission of gases desorbing from coal matrix.The adsorbed gas desorption caused by heating is measured during the entire testing.It is evident that the concentrations of releasing gas(containing methane,carbon dioxide and ethane)slightly rise with increasing temperature.Gas movement observed is closely related to the deformation of coal sample.Both uniaxial compressive strength and elastic modulus of coal samples tend to reduce with temperature.It reveals that increasing temperature can not only result in thermal expansion of coal,but also lead to desorption of preexisting gas in coal which can in turns harden coal due to shrinks of the coal matrix.Even though desorption of adsorbed gas can contribute to the hardening effect for the heated coal,by comparison to the results,it could be inferred that the softening of coal resulted from thermal expansion still predominates changes in mechanical characters of coal sample with temperature at the range from20 to 40℃.

Study on the rheology of coal-oil slurries during heating at high pressure

Using the self-developed viscosity measuring device, the viscosity variations of coal-oil slurries with temperature increasing during coal-oil co-processing were studied. The results show that the viscosity of coal-oil slurries prepared by different kinds of oil varies differently during heating. The viscosity of the coal-oil slurry prepared by the catalytic cracking slurry （FCC） generally decreases during heating. However, the viscosity of the coal-oil slurry prepared by the high-temperature coal tar （CT） will peak at 338 ℃ during heating. The differences in viscosity variations of coal-oil slurries are analyzed. In addition to the temperature, the properties of the solvents and coal are the main influencing factors. Because the used coal contains a large number of polar functional groups, the swelling behavior of the coal in polar solvent （CT） is stronger than that in non-polar solvent （FCC）. The swelling effect of the coal can result in the appearance of the viscosity peak. Therefore, before 100 ~C, the solvent molecules entering into the coal pores is the main influencing factor of coal-oil slurries viscosity variations. After 100 ℃, the increasing of particle size of coal particles is the main influencing factor of coal-oil slurries viscosity variations.

The metabolomics variations among rice, brown rice, wet germinated brown rice, and processed wet germinated brown rice

Germination and processing are always accompanied by significant changes in the metabolic compositions of rice. In this study, polished rice(rice), brown rice, wet germinated brown rice(WGBR), high temperature and pressure-treated WGBR(WGBR-HTP), and low temperature-treated WGBR(WGBR-T18) were enrolled. An untargeted metabolomics assay isolated 6 122 positive ions and 4 224 negative ions(multiple difference ≥1.2 or ≤0.8333, P<0.05, and VIP≥1) by liquid chromatography-mass spectrum. These identified ions were mainly classified into three categories, including the compounds with biological roles, lipids, and phytochemical compounds. In addition to WGBR-T18 vs. WGBR, massive differential positive and negative ions were revealed between rice of different forms. Flavonoids, fatty acids, carboxylic acids, and organoxygen compounds were the dominant differential metabolites. Based on the Kyoto Encyclopedia of Genes and Genomes(KEGG) database, there 7 metabolic pathways(phenylalanine/tyrosine/tryptophan biosynthesis, histidine metabolism, betalain biosynthesis, C5-branched dibasic acid metabolism, purine metabolism, zeatin biosynthesis, and carbon metabolism) were determined between brown rice and rice. Germination changed the metabolic pathways of porphyrin and chlorophyll, pyrimidine, and purine metabolisms in brown rice. In addition, phosphonate and phosphinate metabolism, and arachidonic acid metabolism were differential metabolic pathways between WGBR-HTP and WGBR-T18. To sum up, there were obvious variations in metabolic compositions of rice, brown rice, WGBR, and WGBR-HTP. The changes of specific metabolites, such as flavonoids contributed to the antioxidant, anti-inflammatory, anti-cancer, and immunomodulatory effects of GBR. HTP may further improve the nutrition and storage of GBR through influencing specific metabolites, such as flavonoids and fatty acids.

Equation of state for solids considering cohesive energy and anharmonic effect and its application to MgO

A simple equation of state （EOS） in wide ranges of pressure and temperature is constructed within the MieGruneisen Debye framework. Instead of the popular Birch-Murnaghan and Vinet EOS, we employ a five-parameter cold energy expression to represent the static EOS term, which can correctly produce cohesive energy without any spurious oscillations in the extreme compression and expansion regions, We developed a Pade approximation-based analytic Debye quasiharmonic model with high accuracy which improves the performance of EOS in the low temperature region. The anharmonic effect is taken into account by using a semi-empirical approach. Its reasonability is verified by the fact that the total thermal pressure tends to the lowest-order anharmonic expansion in the literature at low temperature, and tends to ideal-gas limitation at high temperature, which is physically correct. Besides, based on this approach, the anharmonic thermal pressure can be expressed in the Griineisen form, which is convenient for applications. The proposed EOS is used to study the thermodynamic properties of MgO including static and shock compression conditions, and the results are very satisfactory as compared with the experimental data.

Temperature and pressure characteristics of ultrasonic transducer and the amplitude spectra correction of echoes

In this paper,the transfer functions of ultrasonic transducers under different temperatures are imitated according to Mason equivalent circuit. The relevant experiments are carried out. The results show that the transfer characteristic of ultrasonic transducer varies with temperature and pressure. Therefore, we present an approach to correct the amplitude spectra of ultrasonic echoes got in different temperature and pressure environmeots. The theoretical simulation and experimental results prove that the approach is simple, effective and practical.

Effect of operating parameters on coal gasification

Coal combustion and gasification are the processes to utilize coal for production of electricity and many other applications. Global energy demand is increasing day by day. Coal is an abundant source of energy but not a reliable source as it results into high CO2 emissions. Energy industries are expected to decrease the CO2 emission to prevent global warming. Coal gasification is a process that reduces the CO2 emission and emerges as a clean coal technology. Coal gasification process is regulated by several operating parameters. A Number of investigations have been carried out in this direction. A critical review of the work done by several researchers in the field of coal gasification has been compiled in this paper. The effect of several operating parameters such as coal rank, temperature, pressure, porosity, reaction time and catalyst on gasification has been presented here.

A new extraction process of refractory gold arsenosulfide concentrates

A new hydrometallurgical process for the refractory gold arsenosulfideconcentrates under normal temperature and pressure was presented. The experimental results of arefractory gold concentrate show that the total consumption of NaOH in alkaline leaching is only 40%of those theoretically calculated under the conditions of full oxidization at the same oxidation ofarsenic to ar-senate and sulfur to sulfate. After alkaline leaching, cyanidation and adsorptionwere carried out for 24 h. The dissolution of gold by NaCN is increased to 95.3% from 12.8% beforepretreatment, and meanwhile 99.3% of the adsorption of gold by activated charcoal. The consumptionof NaCN for one ton ore is 10 kg, which is 1.2 times less than that before pretreatment. As it iscarried out under normal temperature and pressure, the investment of installations is alsodecreased.