Crossing point temperature of coal

A further understanding of the self-heating of coal was obtained by investigating the crossing point temperature（CPT） of different ranks of coal.The tests were carried out using a self-designed experimental system for coal self-heating.50 g（±0.01 g） of coal particles ranging from 0.18 mm to 0.38 mm in size were put into a pure copper reaction vessel attached to the center of a temperature programmed enclosure.The temperature program increased the temperature at a rate of 0.8℃/min.Dry air was permitted to flow into the coal reaction vessel at different rates.The surrounding temperature and the coal temperature were monitored by a temperature logger.The results indicate that CPT is affected by coal rank,moisture,sulfur, and the experimental conditions.Higher ranked coals show higher CPT values.A high moisture content causes a delay phenomenon during the self-heating of the coal.Drying at 40℃decreases the effects of moisture.The reactivity of sulfur components in the coal is low under dry and low-temperature conditions. These components form a film that covers the coal surface and slightly inhibits the self-heating of the coal. The flow rate of dry air,and the heating rate of the surroundings,also affect the self-heating of the coal.The most appropriate experimental conditions for coal samples of a given weight and particle size were determined through contrastive analysis.Based on this analysis we propose that CPTs be determined under the same,or nearly the same conditions,for evaluation of the spontaneous combustion of coal.

Effect of Sinusoidal Heating on Natural Convection Coupled to Thermal Radiation in a Square Cavity Subjected to Cross Temperature Gradients

Coupled natural convection and surface radiation within a square cavity, filled with air and submitted to discrete heating and cooling from all its walls, is studied numerically. The thermally active elements are centrally located on the walls of the cavity. Two heating modes, called SB and SV, are considered. They correspond to bottom and vertical left elements sinusoidally heated in time, respectively, while the top and vertical right ones are constantly cooled. The remaining portions of all the walls are considered adiabatic. The parameters governing the problem are the amplitude and the period of the temporally sinusoidal temperature, the emissivity of the walls , the relative lengths of the active elements and the Rayleigh number . The effect of such parameters on flow and thermal fields and the resulting heat transfer is examined. It is shown that, during a flow cycle, the flow structure can present complex behavior, depending on the emissivity and the amplitude and period of the exciting temperature. The rate of heat transfer is generally enhanced in the case of sinusoidal heating. Also, the resonance phenomenon existence, characterized by maximum fluctuations in flow intensity and heat transfer, is proved in this study.

Investigation of Strain-Temperature Cross-Sensitivity of FBG Strain Sensors Embedded Onto Different Substrates

The strain-temperature cross-sensitivity problem easily occurs in the engineering strain monitoring of the self-sensing embedded with fiber Bragg grating(FBG)sensors.In this work,a theoretical investigation of the strain-temperature cross-sensitivity has been performed using the temperature reference grating method.To experimentally observe and theoretically verify the problem,the substrate materials,the preloading technique,and the FBG initial central wavelength were taken as main parameters.And a series of sensitivity coefficients calibration tests and temperature compensation tests have been designed and carried out.It was found that when the FBG sensors were embedded on different substrates,their coefficients of the temperature sensitivity were significantly changed.Besides,the larger the coefficients of thermal expansion(CTE)of substrates were,the higher the temperature sensitivity coefficients would be.On the other hand,the effect of the preloading technique and FBG initial wavelength was negligible on both the strain monitoring and temperature compensation.In the case of similar substrates,we did not observe any difference between temperature sensitivity coefficients of the temperature compensation FBG with one free end or two free ends.The curves of the force along with temperature were almost overlapped with minor differences(less than 1%)gained by FBG sensors and pressure sensors,which verified the accuracy of the temperature compensation method.We suggest that this work can provide efficient solutions to the strain-temperature cross-sensitivity for engineering strain monitoring with the self-sensing element embedded with FBG sensors.

Tilted Fiber Bragg Gratings:Principle and Sensing Applications

In this paper,the mode coupling mechanism of tilted fiber Bragg gratings(TFBGs)is briefly introduced at first.And a general review on the fabrication,theoretical and experimental research development of TFBGs is presented from a worldwide perspective,followed by an introduction of our current research work on TFBGs at the Institute of Modern Optics,Nankai University(IMONK),including TFBG sensors for single-parameter measurements,temperature cross sensitivity of TFBG sensors,and TFBG-based interrogation technique.Finally,we would make a summary of the related key techniques and a remark on prospects of the research and applications of TFBGs.