Design of weak current measurement system and research on temperature impact

A dedicated weak current measurement system was designed to measure the weak currents generated by the neutron ionization chamber.This system incorporates a second-order low-pass filter circuit and the Kalman filtering algorithm to effectively filter out noise and minimize interference in the measurement results.Testing conducted under normal temperature conditions has demonstrated the system's high precision performance.However,it was observed that temperature variations can affect the measurement performance.Data were collected across temperatures ranging from -20 to 70℃,and a temperature correction model was established through linear regression fitting to address this issue.The feasibility of the temperature correction model was confirmed at temperatures of -5 and 40℃,where relative errors remained below 0.1% after applying the temperature correction.The research indicates that the designed measurement system exhibits excellent temperature adaptability and high precision,making it particularly suitable for measuring weak currents.

East-west oscillation of sea temperature in the Equatorial Pacific and its modelling

In this paper, by analyzing the data of sea temperature in the Equatorial Western Pacific (EWP), we found that the sea temperature at sensitive district (WSST) (about at 6° N, depth of 125-150 m) is correlated negatively to the sea temperature in the Equatorial Eastern Pacific (EEP). On the basis of basic characteristics of Equatorial Pacific atmosphere and ocean, we designed a simple air-sea coupled model. Using this model,an ocean circulation was simulated. The east-west oscillation of sea temperature in Equatorial Pacific is related to this ocean circulation.

Experiments in numerical modelling of the Pacific sea surface temperature anomalies

By using the atmosphere-ocean coupled model (CGCM) which is composed of a 2-level global atmospheric general circulation model and a 4-layer Pacific oceanic general circulation model developed in the Institute of Atmospheric Physics of Chinese Academy of Sciences, and two model climatological fields got from the two independent models' numerical integrations respectively, the Pacific sea surface temperature anomalies (SSTA) from 1988 to 1989 are simulated in this paper with observed atmospheric general circulation data and sea surface temperature fields as initial conditions and monthly coupling scheme. In order to remove systematic biases of the model climatological fields, interaction variables between atmosphere and ocean are also corrected simultaneously. The experiments show that the simulation results can be improved effectively if these interaction variables are corrected in spite of the fact that there always exist systematic biases in independent numerical simulations of atmospheric part and oceanic part within CGCM. The basic characteristics of the observed Pacific SSTA in September and October 1988 have been simulated by using the correction scheme, such as the negative SSTA domain in the whole E-quatorial Pacific east to 150°E and the positive SSTA domain in the Western Pacific, the northern subtropical Pacific and nearly the whole Southern Pacific. Further numerical simulations show that the model can simulate not only the SSTA in the Pacific and its seasonal variations but also its interannual changes (for example, La Nino event in the Equatorial Pacific terminated after May 1989) to a certain degree. Furthermore, some problems existing in experiment processes and what we shoud do in the following stage are also discussed and analysed in this paper.

A Model for Temperature Infl uence on Concrete Hydration Exothermic Rate (Part one: Theory and Experiment)

Recent achievements in concrete hydration exothermic models based on Arrhenius equation have improved computation accuracy for mass concrete temperature field. But the properties of the activation energy and the gas constant （Ea/R） have not been well studied yet. From the latest experiments it is shown that Ea/R obviously changes with the hydration degree without fixed form. In this paper, the relationship between hydration degree and Ea/R is studied and a new hydration exothermic model is proposed. With those achievements, the mass concrete temperature field with arbitrary boundary condition can be calculated more precisely.

Quantifying the response of surface urban heat island to urbanization using the annual temperature cycle model

Urban heat island(UHI),driving by urbanization,plays an important role in urban sustainability under climate change.However,the quantification of UHI’s response to urbanization is still challenging due to the lack of robust and continuous temperature and urbanization datasets and reliable quantification methods.This study proposed a framework to quantify the response of surface UHI(SUHI)to urban expansion using the annual temperate cycle model.We built a continuous annual SUHI series at the buffer level from 2003 to 2018 in the Jing-Jin-Ji region of China using MODIS land surface temperature and imperviousness derived from Landsat.We then investigated the spatiotemporal dynamic of SUHI under urban expansion and examined the underlying mechanism.Spatially,the largest SUHI interannual variations occurred in suburban areas compared to the urban center and rural areas.Temporally,the increase in SUHI under urban expansion was more significant in daytime compare to nighttime.We found that the seasonal variation of SUHI was largely affected by the seasonal variations of vegetation in rural areas and the interannual variation was mainly attributed to urban expansion in urban areas.Additionally,urban greening led to the decrease in summer daytime SHUI in central urban areas.These findings deepen the understanding of the long-term spatiotemporal dynamic of UHI and the quantitative relationship between UHI and urban expansion,providing a scientific basis for prediction and mitigation of UHI.

Impact of Increasing Stratospheric Water Vapor on Ozone Depletion and Temperature Change

Using a detailed, fully coupled chemistry climate model （CCM）, the effect of increasing stratospheric H20 on ozone and temperature is investigated. Different CCM time-slice runs have been performed to investigate the chemical and radiative impacts of an assumed 2 ppmv increase in H20. The chemical effects of this H20 increase lead to an overall decrease of the total column ozone （TCO） by ～1% in the tropics and by a maximum of 12% at southern high latitudes. At northern high latitudes, the TCO is increased by only up to 5% due to stronger transport in the Arctic. A 2-ppmv H2O increase in the model＇s radiation scheme causes a cooling of the tropical stratosphere of no more than 2 K, but a cooling of more than 4 K at high latitudes. Consequently, the TCO is increased by about 2%-6%. Increasing stratospheric H2O, therefore, cools the stratosphere both directly and indirectly, except in the polar regions where the temperature responds differently due to feedbacks between ozone and H2O changes. The combined chemical and radiative effects of increasing H2O may give rise to more cooling in the tropics and middle latitudes but less cooling in the polar stratosphere. The combined effects of H2O increases on ozone tend to offset each other, except in the Arctic stratosphere where both the radiative and chemical impacts give rise to increased ozone. The chemical and radiative effects of increasing H2O cause dynamical responses in the stratosphere with an evident hemispheric asymmetry. In terms of ozone recovery, increasing the stratospheric H2O is likely to accelerate the recovery in the northern high latitudes and delay it in the southern high latitudes. The modeled ozone recovery is more significant between 2000 ～2050 than between 2050～2100, driven mainly by the larger relative change in chlorine in the earlier period.

Flow behaviour constitutive model of CuCrZr alloy and 35CrMo steel based on dynamic recrystallization softening effect under elevated temperature

In order to study the effect of dynamic recrystallization on the metal flow behavior during thermal deformation,the elevated temperature compression experiments of CuCrZr alloy and 35CrMo steel are carried out using Gleeble-3810 thermal simulator.It is proved that the samples underwent obvious dynamic recrystallization behavior during thermal deformation by microstructure observation of deformed specimens.The size of recrystallized grains increases as the temperature improved and the strain rate decreased.Meanwhile,the net softening rate caused by dynamic recrystallization is determined based on the stress-dislocation relationship.It can be found that the value of net softening rate increases quadratically as the Z parameter decreases,and the dynamic recrystallization net softening rate of CuCrZr alloy and 35CrMo steel are calculated to be 21.9%and 29.8%,respectively.Based on the dynamic recrystallization softening effect proposed,the novel elevated temperature flow constitutive models of two different alloys are proposed,and the related parameters are well defined and solved in detail.The predicted values of the obtained models are agreed well with the experimental values.

SOFC temperature evaluation based on an adaptive fuzzy controller

The operating temperature of a solid oxide fuel cell (SOFC) stack is a very important parameter to be controlled, which impacts the performance of the SOFC due to thermal cycling. In this paper, an adaptive fuzzy control method based on an affine nonlinear temperature model is developed to control the temperature of the SOFC within a specified range. Fuzzy logic systems are used to approximate nonlinear functions in the SOFC system and an adaptive technique is employed to construct the controller. Compared with the traditional fuzzy and proportion-integral-derivative (PID) control, the simulation results show that the designed adaptive fuzzy control method performed much better. So it is feasible to build an adaptive fuzzy controller for temperature control of the SOFC.

Using a process-oriented methodology to precisely evaluate temperature suitability for potato growth in China using GIS

A process-oriented methodology to conduct precise evaluation temporally and spatially on temperature suitability for potato growth was applied in China. Arable lands in China were gridded with 1 km×1 km geographic units, and potential potato phenology in each unit was automatically identified in terms of the potato planting initial temperature and effective accu- mulated temperature. A temperature thermal response coefficient model was used to compute a temperature suitability value for each day of potato phenology in each geographic unit. In addition, five temperature suitability ranking methods were applied to define suitable areas： （1） upper fourth quantile, （2） median, （3） expected value＋1/4 standard deviation, （4） expected value＋1/2 standard deviation, （5） expected value＋1 standard deviation. A validation indicator was innovated to test the effectiveness of the five ranking methods. The results showed that from a strict degree point of view, the five methods sequence was as follows： 1=3〉4〉2〉5, with a and c determined as the two best ranking methods. For methods 1 and 3, the suitable potato growing area was 1 of 57.76× 10^4 km2. In addition, the suitable, areas were spatially coincident with the main potato producing counties. The study output technically supports the proposal from China＇s government that there is a large potential area to grow winter-ploughed potato in South China because the potential suitable area for growing potato is approximately 2×10^7 ha. In southeast Heilongjiang and east Jilin, where it is hilly and mountainous, there are still some potentially suitable areas for potato growing accounting for nearly 2.32×10^6 ha. The authors suggest to optimize the agricultural regionalization and layout in China and to adjust the cropping pattern structure.

INVESTIGATION OF SURFACE TEMPERATURE IN HIGH-EFFICIENCY DEEP GRINDING

A new thermal model with triangular heat flux distribution is given in high-efficiency deep grinding. The mathematical expressions are driven to calculate the surface temperature. The transient behavior of the maximum temperature on contact area is investigated in different grinding conditions with a J-type thermocouple. The maximum contact temperatures measured in different conditions are found to be between 1 000 ℃ and 1 500 ℃ in burn-out conditions. The experiment results show good agreement with the new thermal model.

Spatio-temporal variation of land surface temperature and temperature lapse rate over mountainous Kashmir Himalaya

In this study, Land Surface Temperature(LST) and its lapse rate over the mountainous Kashmir Himalaya was estimated using MODIS data and correlated with the observed in-situ air temperature(Tair) data. Comparison between the MODIS LST and Tair showed a close agreement with the maximum error of the estimate ±1°C and the correlation coefficient >0.90. Analysis of the LST data from 2002-2012 showed an increasing trend at all the selected locations except at a site located in the southeastern part of Kashmir valley. Using the GTOPO30 DEM, MODIS LST data was used to estimate the actual temperature lapse rate(ATLR) along various transects across Kashmir Himalaya, which showed significant variations in space and time ranging from 0.3°C to 1.2°C per 100 m altitude change. This observation is at variance with the standard temperature lapse rate(STLR) of 0.65°C used universally in most of the hydrological and other land surface models. Snowmelt Runoff Model(SRM) was used to determine the efficacy of using the ATLR for simulating the stream flows in one of the glaciated and snow-covered watersheds in Kashmir. The use of ATLR in the SRM model improved the R2 between the observed and predicted streamflows from 0.92 to 0.97.It is hoped that the operational use of satellite-derived LST and ATLR shall improve the understanding and quantification of various processes related to climate, hydrology and ecosystem in the mountainous and data-scarce Himalaya where the use of temperature and ATLR are critical parameters for understanding various land surface and climate processes.

The temperature-dependent fracture strength model for ultra-high temperature ceramics

Breaking down the entire structure of a material implies severing all the bonds between its atoms either by applying work or by heat transfer. Because bond-breaking is indifferent to either means, there is a kind of equivalence between heat energy and strain energy. Based on this equivalence, we assume the existence of a constant maximum storage of energy that includes both the strain energy and the corresponding equivalent heat energy. A temperaturedependent fracture strength model is then developed for ultrahigh temperature ceramics （UHTCs）. Model predictions for UHTCs, HfB2, TiC and ZrB2, are presented and compared with the experimental results. These predictions are found to be largely consistent with experimental results.

Flow Field and Temperature Field in GaN-MOCVD Reactor Based on Computational Fluid Dynamics Modeling

Metal organic chenlical vapor deposition （AIOCVD） growth systems arc one of the. main types of equipment used for growing single crystal materials, such as GaN. To obtain fihn epitaxial materials with uniform performanee, the flow field and ternperature field in a GaN-MOCVD reactor are investigated by modeling and simulating. To make the simulation results more consistent with the actual situation, the gases in the reactor are considered to be compressible, making it possible to investigate the distributions of gas density and pressure in the reactor. The computational fluid dynamics method is used to stud,v the effects of inlet gas flow velocity, pressure in the reactor, rotational speed of graphite susceptor, and gases used in the growth, which has great guiding~ significance for the growth of GaN fihn materials.

Soft-Sensing Method of Water Temperature Measurement for Controlled Cooling System

Aiming at the water temperature measuring problem for controlled cooling system of rolling plant,a new water temperature measuring method based on soft-sensing method with a water temperature model of on-line self correction parameter was built.A water temperature compensation factor model was also built to improve coiling temperature control precision.It was proved that the model meets production requirements.The soft-sensing technique has extensive applications in the field of metal forming.

Parameter estimation of cutting tool temperature nonlinear model using PSO algorithm

In cutting tool temperature experiment, a large number of related data could be available. In order to define the relationship among the experiment data, the nonlinear regressive curve of cutting tool temperature must be constructed based on the data. This paper proposes the Particle Swarm Optimization (PSO) algorithm for estimating the parameters such a curve. The PSO algorithm is an evolutional method based on a very simple concept. Comparison of PSO results with those of GA and LS methods showed that the PSO algorithm is more effective for estimating the parameters of the above curve.

Simulations and Measurement of Electron Energy and Effective Electron Temperature of Nanosecond Pulsed Argon Plasma

The behavior of argon plasma driven by nanosecond pulsed plasma in a low-pressure plasma reactor is investigated using a global model, and the results are compared with the experimental measurements. The time evolution of plasma density and the electron energy probability function are calculated by solving the energy balance and Boltzmann equations. During and shortly after the discharge pulse, the electron energy probability function can be represented by a bi-Maxwellian distribution, indicating two energy groups of electrons. According to the effective electron temperature calculation, we find that there are more high-energy electrons that play an important role in the excitation and ionization processes than low-energy electrons. The effective electron temperature is also measured via optical emission spectroscopy to evaluate the simulation model. In the comparison, the simulation results are found to be in agreement with the measure- ments. Furthermore, variations of the effective electron temperature are presented versus other discharge parameters, such as pulse width time, pulse rise time and gas pressure.

Numerical simulation of temperature field in laser-arc hybrid welding of wear-resistant steel

Using ABAQUS software and cylindrical ellipsoid and body heat sources with a peak-heat-flux- attenuation function, a finite element model of the temperature field in the laser-arc hybrid welding of 4.5-mm BW300TP wear-resistant steel is proposed. The proposed model considers convection, radiation, molten pool flow, and heat conduction effect on temperature. A comparison of the simulation and actual welding test results confirms the reliability of the model. This welding heat-process model can provide the cooling rate at any position in the heat affected zone （HAZ） and can be used as a reference for the analysis of material properties and for process optimization.

Temporal variability of temperature-nitrate relationship in a coastal region

The inverse relationship between nitrate and temperature(N-T relationship) has been used to estimate new production from remotely sensed sea surface temperature at the regional or global scale of oceans. This study aimed to develop a time-series model of the N-T relationship from automated, continuous hourly observations over two years on the coast of Halifax, Canada. The model demonstrated time-series variability of the N-T relationship at a coastal station on the Nova Scotia Shelf, with adjusted R 2 =0.999 4 and RMSE=0.025 7. The maximum residual value was 0.077. The annual temperature variations described a sine curve, and daily, weekly, and monthly variations fluctuated within the normal ranges, controlled by the local climate. The annual variation of nitrate concentration formed nearly a sine curve. Heavy or longlasting rainfall increased nitrate concentration by 4 to 30-fold in 24 h, and then the increased nitrogen was quickly depleted by phytoplankton growth in 10 to 48 h. In general, biological activity was a key factor in causing nitrate concentration change, dependent mainly on seawater temperature. The power function of the N-T relationship observed in our study area could be used to quickly estimate sea surface nitrate concentration, in combination with temperature data obtained by remote sensing.

SIMULATED MATHEMATICAL MODEL FOR HIGH PRESSURE CYLINDER WALL TEMPERATURE OF HOMEMADE TURBINE

In order to balance the contradiction between the demand of high precision and that of short time interval of model computing for the power plant simulator, a set of simulated mathematical models are constructed. The model describes the cylinder wall temperature located at four key positions of the high pressure cylinder. The simulated model is confirmed to be not only simple but also precise via comparison between the simulated results and the autoptic data of a power plant.

Review of Statistical Water Temperature Models for a Peruvian Andean River

The rapid increase in Water Temperature Rivers (WTR) observed globally in recent decades and projections for the coming decades under climate change scenarios make water temperature prediction essential to assess changes in aquatic biota. Statistical models for stream temperature prediction have been widely used because they are computationally simple, involve few parameters, and because of their relatively good accuracy. However, these models have not been evaluated in Peruvian Andean rivers. This work evaluates the main water temperature statistical models from the literature and fits them with data recorded in the Ichu River experimental watershed, Huancavelica-Peru. Three well-known models were reviewed: the Stefan & Preud’homme linear regression model and the Mohseni & Stefan 3- and 4-parameter logistic regression models. Ichu river water temperatures were simulated using the SWAT (Soil and Water Assessment Tool) hydrometeorological model, which defaults to the Stefan & Preud’homme model. Modifications and adjustment of coefficients of the evaluated models were configured in the SWAT code using the “Latin Hypercube Sampling” technique. The evaluated models showed poor performance in predicting the water temperature in the Ichu River with NSE (Nash-Sutcliffe Efficiency) values ranging from -2.6 to 0.49, while the modified models showed NSE values of 0.72 in all three cases. Findings suggest that the statistical models shown in the literature should be validated for Andean rivers.