Nanostructured molybdenum carbide （Mo2C） was successfully prepared from molybdenum trioxide （MoO3） using methanothermal temperature-programmed reaction. Thermodynamic analysis indicated that in presence of methane...Nanostructured molybdenum carbide （Mo2C） was successfully prepared from molybdenum trioxide （MoO3） using methanothermal temperature-programmed reaction. Thermodynamic analysis indicated that in presence of methane, the formation of Mo2C from MoO3 occurs through the path of MoO3 → MoO2→ Mo2C. The carburized MoO3 was characterized using X-ray diffraction （XRD）, CHNS/O analysis, Brunauer-Emmett-Teller （BET） analysis, and field-emission scanning electron microscopy （FESEM）. At final carburization temperatures of 700 and 800℃ and at methane contents ranging from 5vol% to 20vol%, Mo2C was the only solid product observed in the XRD patterns. The re- suits indicated that the effect of methane content on the formation of the carbide phase is substantial compared with the effect of carburization time. Elemental analysis showed that at a final temperature of 700℃, the carbon content of carburized MoO3 is very close to the theoretical carbon mass percentage in Mo2C. At higher carburization temperatures, excess carbon was deposited onto the surface of Mo2C. High-surface-area Mo2C was obtained at extremely low heating rates; this high-surface-area material is a potential electrocatalyst.展开更多
基金Sahand University of Technology for the financial support of this project
文摘Nanostructured molybdenum carbide （Mo2C） was successfully prepared from molybdenum trioxide （MoO3） using methanothermal temperature-programmed reaction. Thermodynamic analysis indicated that in presence of methane, the formation of Mo2C from MoO3 occurs through the path of MoO3 → MoO2→ Mo2C. The carburized MoO3 was characterized using X-ray diffraction （XRD）, CHNS/O analysis, Brunauer-Emmett-Teller （BET） analysis, and field-emission scanning electron microscopy （FESEM）. At final carburization temperatures of 700 and 800℃ and at methane contents ranging from 5vol% to 20vol%, Mo2C was the only solid product observed in the XRD patterns. The re- suits indicated that the effect of methane content on the formation of the carbide phase is substantial compared with the effect of carburization time. Elemental analysis showed that at a final temperature of 700℃, the carbon content of carburized MoO3 is very close to the theoretical carbon mass percentage in Mo2C. At higher carburization temperatures, excess carbon was deposited onto the surface of Mo2C. High-surface-area Mo2C was obtained at extremely low heating rates; this high-surface-area material is a potential electrocatalyst.
