A new method to calculate the motor temperature rising in electric vehicle (EV) is proposed based on the stator resistance identification. The measure theory of the motor temperature rising with the stator resistanc...A new method to calculate the motor temperature rising in electric vehicle (EV) is proposed based on the stator resistance identification. The measure theory of the motor temperature rising with the stator resistance is discussed at first. An enhanced magnetism motor dynamic math model is built which is the research object. Then the resistance identification system model is built on the mutual model reference adaptive,system (MRAS) theory. The simulation diagram of the mutual MRAS model is constructed and the resistance identification performance is studied in different motor states. Simulation results indicate that the stator resistance identification model with the mutual MRAS is effective. At the same time, the identification of motor temperature rising is possible with the identification of the stator resistance.展开更多
Experiments were carried out on carburizing and temperature rising of the semi steel melt in a plasma induction furnace.Influence of many factors, such as power supply mode,position of the plasma torch and bottom b...Experiments were carried out on carburizing and temperature rising of the semi steel melt in a plasma induction furnace.Influence of many factors, such as power supply mode,position of the plasma torch and bottom blown gas stirring,on heating efficiency and melt temperature distribution was studied. Melt temperature could be effectively controlled by plasma heating,and carbon content of semi steel melt increased from 1.92 % to 4.58 %, and the utilization rate of carbon reached up to 61.57 % during carburizing of the melt.展开更多
Background:Predicting the possibility of severe effects of global warming on animals is important for understanding the ecological consequences of climate change on ecosystem.Spring is the season during which birds ha...Background:Predicting the possibility of severe effects of global warming on animals is important for understanding the ecological consequences of climate change on ecosystem.Spring is the season during which birds have to physiologically prepare for the subsequent breeding period,and unusual spring temperature rising probably becomes a heat stress to the birds which have adapted to the low spring temperature.Therefore,it is necessary to understand the physiological effect of spring warming on the temperate birds.Methods:Using the activities of blood anti-oxidative enzymes(SOD,CAT,GPx)and the concentrations of serum immunogloblins(IgA,IgY,IgM)as indicators,we compared the anti-oxidative and immune functions of Asian Shorttoed Larks(Calandrella cheleensis)captured between 10 and 15 March,2015 and housed under conditions of 21°C and 16°C.Results:The SOD activities of birds in 21°C group were significantly lower than those in 16°C group on all the treatment days.The CAT activities of the birds in 21°C group were significantly lower than those in 16°C group on the 1 st,5 th,13 th,17 treatment days.The GPx activities of the birds in 21°C group were signifthicantly lower than those in 16°C group on the 1 st,13 th and 17 th,but significantly higher on the 21 st treatment day.The IgA,IgY and IgM concentrations of birds in 21°C group were significantly lower than those in 16°C group on all the treatment days.Conclusions:This study shows that spring temperature rising negatively influences antioxibative and humoral immune functions,which indicates that spring climate warming might reduce the fitness of the temperate passerine birds which have adapted to the low spring temperature.展开更多
High speed on/off valve(HSV)is an essential component in aerospace digital hydraulic systems(ADHS).Dynamic performance and temperature rising characteristic are two important features,which determine the performance o...High speed on/off valve(HSV)is an essential component in aerospace digital hydraulic systems(ADHS).Dynamic performance and temperature rising characteristic are two important features,which determine the performance of HSV,and affect the response speed and reliability of ADHS.Increasing the driving voltage is an effective method for improving the dynamic performance of HSV.However,continuous high voltage excitation will lead to more wasted energy,higher temperature rising and lower reliability.To solve this problem,a pre-excitation control algorithm(PECA)is proposed in this paper based on the theoretical model of the influence of electrical parameters on dynamic performance and temperature rising characteristics.In PECA,an appropriate initial coil current is generated by pre-excitation instead of increasing driving voltage,which significantly shortens the switching delay time.Then,based on real-time current online calculation and feedback mechanism,the adaptive switching of five equivalent voltages is realized.Consequently,the coil current can be rapidly kept at the expected state without consuming more energy and generating more heat.Results indicate that compared with conventional PWM control algorithm,the PECA can improve dynamic performance of HSV,shorten the total switching time by 71.5%,and increase the maximum operation frequency.Therefore,the linear area of flow characteristic is expended by 80.0%,the adjusting time of HSV-controlled system is reduced by 23%,while shortening steady error by 46.7%.Moreover,the temperature rising characteristics of HSV are better,the maximum operation temperature is reduced by 68.6%,and the time to reach the steady state temperature is shortened by 20%.From the results,it can be concluded that the PECA is not only an effective and practical control algorithm for improving the performance of HSVs and HSV-controlled systems while reducing the heat generation and decreasing the temperature rising of HSV,but also can be a potential solution in ADHS.展开更多
The development of vehicle integrated photovoltaics-powered electric vehicles (VIPV-EV) significantly reduces CO<sub>2</sub> emissions from the transport sector to realize a decarbonized society. Although ...The development of vehicle integrated photovoltaics-powered electric vehicles (VIPV-EV) significantly reduces CO<sub>2</sub> emissions from the transport sector to realize a decarbonized society. Although long-distance driving of VIPV-EV without electricity charging is expected in sunny regions, driving distance of VIPV-EV is affected by climate conditions such as solar irradiation and temperature rise of PV modules. In this paper, detailed analytical results for effects of climate conditions such as solar irradiation and temperature rise of PV modules upon driving distance of the VIPV-EV were presented by using test data for Toyota Prius and Nissan Van demonstration cars installed with high-efficiency InGaP/GaAs/InGaAs 3-junction solar cell modules with a module efficiency of more than 30%. The temperature rise of some PV modules studied in this study was shown to be expressed by some coefficients related to solar irradiation, wind speed and radiative cooling. The potential of VIPV-EV to be deployed in 10 major cities was also analyzed. Although sunshine cities such as Phoenix show the high reduction ratio of driving range with 17% due to temperature rise of VIPV modules, populous cities such as Tokyo show low reduction ratio of 9%. It was also shown in this paper that the difference between the driving distance of VIPV-EV driving in the morning and the afternoon is due to PV modules’ radiative cooling. In addition, the importance of heat dissipation of PV modules and the development of high-efficiency PV modules with better temperature coefficients was suggested in order to expand driving range of VIPV-EV. The effects of air-conditioner usage and partial shading in addition to the effects of temperature rise of VIPV modules were suggested as the other power losses of VIPV-EV.展开更多
Growth and energy budget of marine amphipod juvenile Eogammarus possjeticus at different temperatures(20℃,24℃,26℃,28℃,30℃,32℃ and 34℃)were investigated in this study.The results showed that the cumulative morta...Growth and energy budget of marine amphipod juvenile Eogammarus possjeticus at different temperatures(20℃,24℃,26℃,28℃,30℃,32℃ and 34℃)were investigated in this study.The results showed that the cumulative mortality rate increased significantly with rising temperature(p<0.01),and exceeded 50%after 24 h when temperature was above 30℃.With the temperature increasing from 20℃ to 26℃,the ingestion rate and absorption rate increased,but decreased significantly above 28℃(p<0.01),indicating a decline in feeding ability at high temperatures.The specific growth rate increased with rising temperature,but decreased significantly(p<0.01)after reaching the maximum value at 24℃.Similarly,the oxygen consumption and ammonia emission rates also showed a trend of first increase and then decrease.However,the O:N ratio decreased first and then increased with rising temperature,indicating that the energy demand of E.possjeticus juvenile transferred from metabolism of carbohydrate and lipid to protein.In the energy distribution of amphipods,the proportion of each energy is different.With rising temperature,the ratio of the energy deposited for growth accounted for ingested gross energy showing a trend of decrease,while the energy lost to respiration,ammonia excretion,and feces accounted for ingested gross energy being showed a trend of increase.It seemed that rising temperature increased the metabolism and energy consumption of the amphipods and,meanwhile,decreased the energy used for growth,which may be an important reason for the slow growth and small body size of the amphipods during the summer high-temperature period.展开更多
This standard specifies the definitions, theory, apparatus, specimens, procedures, test results and disposal, test error and report of test method for refractoriness under load of refractory products (non-differentia...This standard specifies the definitions, theory, apparatus, specimens, procedures, test results and disposal, test error and report of test method for refractoriness under load of refractory products (non-differential, with rising temperature).展开更多
To solve the problems of large losses and low productivity of permanent magnet synchronous generators used in wind power systems,the field-circuit coupling method is used to accurately solve the electromagnetic field ...To solve the problems of large losses and low productivity of permanent magnet synchronous generators used in wind power systems,the field-circuit coupling method is used to accurately solve the electromagnetic field and temperature field of the generator.The loss distribution of the motor is accurately obtained by considering the influence of external circuit characteristics on its internal physical field.By mapping the losses to the corresponding part of the three-dimensional finite element model of the motor,the temperature field is solved,and the global temperature distribution of the generator,considering the influence of end windings,is obtained.By changing the air gap length,permanent magnet thickness,and winding conductivity,the relationship between the loss,temperature rise,and exergy efficiency can be obtained.By optimizing the air gap length,permanent magnet thickness,and winding conductivity,the best configuration and material properties can improve the efficiency of the motor by up to 4%.展开更多
This study explores the ice flow acceleration(21.1%)of Pedersenbreen during 2016–2017 after the extremely warm winter throughout the whole Arctic in 2015/2016 using in situ data and quantitatively analyses the factor...This study explores the ice flow acceleration(21.1%)of Pedersenbreen during 2016–2017 after the extremely warm winter throughout the whole Arctic in 2015/2016 using in situ data and quantitatively analyses the factors contributing to this acceleration.Several data sets,including 2008–2018 air temperature data from Ny-?lesund,ten-year in situ GPS measurements and Elmer/Ice ice flow modelling under different ice temperature scenarios,suggest that the following factors contributed to the ice flow acceleration:the softened glacier ice caused by an increase in the air temperature(1.5℃)contributed 2.7%–30.5%,while basal lubrication contributed 69.5%–97.3%.The enhanced basal sliding was mostly due to the increased surface meltwater penetrating to the bedrock under the rising air temperature conditions;consequently,the glacier ice flow acceleration was caused mainly by an increase in subglacial water.For Pedersenbreen,there was an approximately one-year time lag between the change in air temperature and the change in glacier ice flow velocity.展开更多
Recent achievements in concrete hydration exothermic models based on Arrhenius equation have improved computation accuracy for mass concrete temperature field. But the properties of the activation energy and the gas c...Recent achievements in concrete hydration exothermic models based on Arrhenius equation have improved computation accuracy for mass concrete temperature field. But the properties of the activation energy and the gas constant (Ea/R) have not been well studied yet. From the latest experiments it is shown that Ea/R obviously changes with the hydration degree without fixed form. In this paper, the relationship between hydration degree and Ea/R is studied and a new hydration exothermic model is proposed. With those achievements, the mass concrete temperature field with arbitrary boundary condition can be calculated more precisely.展开更多
Ultra-high speed machining technology enables high efficiency, high precision and high integrity of machined surface. Previous researches of hybrid bearing rarely consider influences of solid particles in lubricant an...Ultra-high speed machining technology enables high efficiency, high precision and high integrity of machined surface. Previous researches of hybrid bearing rarely consider influences of solid particles in lubricant and ultra-high speed of hybrid bearing, which cannot be ignored under the high speed and micro-space conditions of ultra-high speed water-lubricated hybrid bearing. Considering the impact of solid particles in lubricant, turbulence and temperature viscosity effects of lubricant, the influences of particles on pressure distribution, loading capacity and the temperature rise of the lubricant film with four-step-cavity ultra-high speed water-lubricated hybrid bearing are presented in the paper. The results show that loading capacity of the hybrid bearing can be affected by changing the viscosity of the lubricant, and large particles can improve the bearing loading capacity higher. The impact of water film temperature rise produced by solid particles in lubricant is related with particle diameter and minimum film thickness. Compared with the soft particles, hard particles cause the more increasing of water film temperature rise and loading capacity. When the speed of hybrid bearing increases, the impact of solid particles on hybrid bearing becomes increasingly apparent, especially for ultra-high speed water-lubricated hybrid bearing. This research presents influences of solid particles on the loading capacity and the temperature rise of water film in ultra-high speed hybrid bearings, the research conclusions provide a new method to evaluate the influence of solid particles in lubricant of ultra-high speed water-lubricated hybrid bearing, which is important to performance calculation of ultra-high speed hybrid bearings, design of filtration system, and safe operation of ultra-high speed hybrid bearings.展开更多
In order to evaluate the feasibility of using phase change materials to reduce the inner temperature rise of mass concrete, the interior temperature of normal concrete specimen under semi-adiabatic curing condition wa...In order to evaluate the feasibility of using phase change materials to reduce the inner temperature rise of mass concrete, the interior temperature of normal concrete specimen under semi-adiabatic curing condition was measured. The effect of embedding phase change material(PCM) and replacing water with suspension of phase change material(SPCM) as cooling fluid were compared in the experiment. The cooling effect and the affecting factors were analyzed and calculated. The research results showed that the peak of inner temperature could be decreased obviously by the method of pre-embeding PCM in concrete, however, this method is only effective in the initial stage of cement hydration process. Besides, the volume of PCM is rather big and the PCM can not be used circularly, which means that this method can only be used under special condition and the feasibility is low. When SPCM was used as cooling fluid, the interior temperature rise of mass concrete was reduced more effectively, and the temperature grads peak around the cooling pipe was also reduced. Besides, both the SPCM consumption amount and the circulation time were decreased, and most important is that the SPCM is recyclable. The technical and economical feasibility of using SPCM to reduce the inner temperature rise of mass concrete is high.展开更多
The Urban Heat Island Effect(UHI)has now become a commonly observed phenomenon worldwide.Indeed,it has become a significant environmental effect of urbanisation.In Malaysia,research results showed that UHI effects a...The Urban Heat Island Effect(UHI)has now become a commonly observed phenomenon worldwide.Indeed,it has become a significant environmental effect of urbanisation.In Malaysia,research results showed that UHI effects are very evident in several cities such as Kuala Lumpur and Putrajaya.UHI effect has long been observed to cause temperature of cities.展开更多
This paper describes the evolution of vapour bubbles and its effect on nonlinear ultrasound propagation and temperature rise through tissues for therapeutic ultrasound. An acoustic-thermo coupling algorithm incorporat...This paper describes the evolution of vapour bubbles and its effect on nonlinear ultrasound propagation and temperature rise through tissues for therapeutic ultrasound. An acoustic-thermo coupling algorithm incorporating nonlinearity, diffraction, and temperature-dependent tissue properties, is employed to describe nonlinear ultrasound propagation and thermal effect. Results demonstrate that an obvious migration of peak pressure toward transducer surface is observed while the position of peak temperature changes little in liver tissue before the generation of vapour bubbles, and that the boiling region enlarges towards the surface of transducer in axial direction but increases slowly in radial direction after the generation of vapour bubbles.展开更多
A method of estimating the critical rate of temperature rise for the thermal explosion of first order autocatalytic decomposition reaction systems by using non-isothermal DSC is presented. The information was obtained...A method of estimating the critical rate of temperature rise for the thermal explosion of first order autocatalytic decomposition reaction systems by using non-isothermal DSC is presented. The information was obtained on the increasing rate of temperature for the first order autocatalytic decomposition of nitrocellulose containing 13.86% nitrogen converting into the thermal explosion.展开更多
Aiming at the problem of temperature rise of mine flameproof outer rotor permanent magnet synchronous motor,based on the fluid structure coupling method,the temperature distribution of motor under three cooling scheme...Aiming at the problem of temperature rise of mine flameproof outer rotor permanent magnet synchronous motor,based on the fluid structure coupling method,the temperature distribution of motor under three cooling schemes of air cooling and water cooling are calculated respectively.For the structure I air cooling system,the influence of different number of heat sink on the maximum temperature rise and pressure drop of fluid channel is analyzed,and the parameters of heat sink are optimized.For the structure II air cooling system,the influence of setting fillet at the turn back of the fluid channel on the head loss in the fluid domain of the motor is analyzed,and the influence of different fillet radius on the head loss and the maximum temperature rise in the fluid domain is obtained.For the structure II water cooling system,the influence of different water flow speed on the maximum temperature rise of the motor is analyzed,and the influence of different assembly clearance of modular stator teeth and yoke on the maximum temperature rise of the motor is analyzed.The cooling effect and temperature rise distribution characteristics of the three cooling schemes are compared and analyzed.Finally,a water-cooled prototype is manufactured,and the temperature rise experiment is carried out,and the influence of the thermal deformation of fluid channel,stator yoke and stator teeth on the maximum temperature of the motor is analyzed.The results show that the calculated temperature field after considering the thermal deformation is closer to the experimental value,which verifies the accuracy of the calculation results,It also provides a reference for the selection and design of the cooling structure of the same type of PMSM electric roller.展开更多
To solve the problem of temperature rise caused by the high power density of high-speed permanent magnet synchronous traction motors,the temperature rise of various components in the motor is analyzed by coupling the ...To solve the problem of temperature rise caused by the high power density of high-speed permanent magnet synchronous traction motors,the temperature rise of various components in the motor is analyzed by coupling the equivalent thermal circuit method and computational fluid dynamics.Also,a cooling strategy is proposed to solve the problem of temperature rise,which is expected to prolong the service life of these devices.First,the theoretical bases of the approaches used to study heat transfer and fluid mechanics are discussed,then the fluid flow for the considered motor is analyzed,and the equivalent thermal circuit method is introduced for the calculation of the temperature rise.Finally,the stator,rotor loss,motor temperature rise,and the proposed cooling method are also explored through experiments.According to the results,the stator temperature at 50,000 r/min and 60,000 r/min at no-load operation is 68℃ and 76℃,respectively.By monitoring the temperature of the air outlets inside and outside the motor at different speeds,it is also found that the motor reaches a stable temperature rise after 65 min of operation.Coupling of the thermal circuit method and computational fluid dynamics is a strategy that can provide the average temperature rise of each component and can also comprehensively calculate the temperature of each local point.We conclude that a hybrid cooling strategy based on axial air cooling of the inner air duct of the motor and water cooling of the stator can meet the design requirements for the ventilation and cooling of this type of motors.展开更多
The present study aims at improving the accuracy of weather forecast by providing useful information on the behavior and response of a sounding temperature sensor.A hybrid approach relying on Computational Fluid Dynam...The present study aims at improving the accuracy of weather forecast by providing useful information on the behavior and response of a sounding temperature sensor.A hybrid approach relying on Computational Fluid Dynamics and a genetic algorithm(GA)is used to simulate the system represented by the bead thermistor and the surrounding air.In particular,the influence of different lead angles,sensor lead length,and lead number is considered.The results have shown that when the length of the lead wire of the bead thermistor is increased,the radiation temperature rise is reduced;when the number of lead wire is four and the angle between the lead wires is 180°,the solar radiation angle has a scarce influence on the radiation temperature rise of the sounding temperature sensor.展开更多
基金Sponsored by the National"863"Program Project(2005AA501650)
文摘A new method to calculate the motor temperature rising in electric vehicle (EV) is proposed based on the stator resistance identification. The measure theory of the motor temperature rising with the stator resistance is discussed at first. An enhanced magnetism motor dynamic math model is built which is the research object. Then the resistance identification system model is built on the mutual model reference adaptive,system (MRAS) theory. The simulation diagram of the mutual MRAS model is constructed and the resistance identification performance is studied in different motor states. Simulation results indicate that the stator resistance identification model with the mutual MRAS is effective. At the same time, the identification of motor temperature rising is possible with the identification of the stator resistance.
文摘Experiments were carried out on carburizing and temperature rising of the semi steel melt in a plasma induction furnace.Influence of many factors, such as power supply mode,position of the plasma torch and bottom blown gas stirring,on heating efficiency and melt temperature distribution was studied. Melt temperature could be effectively controlled by plasma heating,and carbon content of semi steel melt increased from 1.92 % to 4.58 %, and the utilization rate of carbon reached up to 61.57 % during carburizing of the melt.
基金supported by the National Natural Science Foundation of China(No.31872246)。
文摘Background:Predicting the possibility of severe effects of global warming on animals is important for understanding the ecological consequences of climate change on ecosystem.Spring is the season during which birds have to physiologically prepare for the subsequent breeding period,and unusual spring temperature rising probably becomes a heat stress to the birds which have adapted to the low spring temperature.Therefore,it is necessary to understand the physiological effect of spring warming on the temperate birds.Methods:Using the activities of blood anti-oxidative enzymes(SOD,CAT,GPx)and the concentrations of serum immunogloblins(IgA,IgY,IgM)as indicators,we compared the anti-oxidative and immune functions of Asian Shorttoed Larks(Calandrella cheleensis)captured between 10 and 15 March,2015 and housed under conditions of 21°C and 16°C.Results:The SOD activities of birds in 21°C group were significantly lower than those in 16°C group on all the treatment days.The CAT activities of the birds in 21°C group were significantly lower than those in 16°C group on the 1 st,5 th,13 th,17 treatment days.The GPx activities of the birds in 21°C group were signifthicantly lower than those in 16°C group on the 1 st,13 th and 17 th,but significantly higher on the 21 st treatment day.The IgA,IgY and IgM concentrations of birds in 21°C group were significantly lower than those in 16°C group on all the treatment days.Conclusions:This study shows that spring temperature rising negatively influences antioxibative and humoral immune functions,which indicates that spring climate warming might reduce the fitness of the temperate passerine birds which have adapted to the low spring temperature.
基金the National Natural Science Foundation of China(No.52005441)Young Elite Scientist Sponsorship Program by CAST(No.2022QNRC001)+3 种基金Natural Science Foundation of Zhejiang Province(No.LQ21E050017)“Pioneer”and“Leading Goose”R&D Program of Zhejiang Province(Nos.2022C01122 and 2022C01132)Postdoctoral Science Foundation(Nos.2021M692777 and 2021T140594)State Key Laboratory of Mechanical System and Vibration(No.MSV202316).
文摘High speed on/off valve(HSV)is an essential component in aerospace digital hydraulic systems(ADHS).Dynamic performance and temperature rising characteristic are two important features,which determine the performance of HSV,and affect the response speed and reliability of ADHS.Increasing the driving voltage is an effective method for improving the dynamic performance of HSV.However,continuous high voltage excitation will lead to more wasted energy,higher temperature rising and lower reliability.To solve this problem,a pre-excitation control algorithm(PECA)is proposed in this paper based on the theoretical model of the influence of electrical parameters on dynamic performance and temperature rising characteristics.In PECA,an appropriate initial coil current is generated by pre-excitation instead of increasing driving voltage,which significantly shortens the switching delay time.Then,based on real-time current online calculation and feedback mechanism,the adaptive switching of five equivalent voltages is realized.Consequently,the coil current can be rapidly kept at the expected state without consuming more energy and generating more heat.Results indicate that compared with conventional PWM control algorithm,the PECA can improve dynamic performance of HSV,shorten the total switching time by 71.5%,and increase the maximum operation frequency.Therefore,the linear area of flow characteristic is expended by 80.0%,the adjusting time of HSV-controlled system is reduced by 23%,while shortening steady error by 46.7%.Moreover,the temperature rising characteristics of HSV are better,the maximum operation temperature is reduced by 68.6%,and the time to reach the steady state temperature is shortened by 20%.From the results,it can be concluded that the PECA is not only an effective and practical control algorithm for improving the performance of HSVs and HSV-controlled systems while reducing the heat generation and decreasing the temperature rising of HSV,but also can be a potential solution in ADHS.
文摘The development of vehicle integrated photovoltaics-powered electric vehicles (VIPV-EV) significantly reduces CO<sub>2</sub> emissions from the transport sector to realize a decarbonized society. Although long-distance driving of VIPV-EV without electricity charging is expected in sunny regions, driving distance of VIPV-EV is affected by climate conditions such as solar irradiation and temperature rise of PV modules. In this paper, detailed analytical results for effects of climate conditions such as solar irradiation and temperature rise of PV modules upon driving distance of the VIPV-EV were presented by using test data for Toyota Prius and Nissan Van demonstration cars installed with high-efficiency InGaP/GaAs/InGaAs 3-junction solar cell modules with a module efficiency of more than 30%. The temperature rise of some PV modules studied in this study was shown to be expressed by some coefficients related to solar irradiation, wind speed and radiative cooling. The potential of VIPV-EV to be deployed in 10 major cities was also analyzed. Although sunshine cities such as Phoenix show the high reduction ratio of driving range with 17% due to temperature rise of VIPV modules, populous cities such as Tokyo show low reduction ratio of 9%. It was also shown in this paper that the difference between the driving distance of VIPV-EV driving in the morning and the afternoon is due to PV modules’ radiative cooling. In addition, the importance of heat dissipation of PV modules and the development of high-efficiency PV modules with better temperature coefficients was suggested in order to expand driving range of VIPV-EV. The effects of air-conditioner usage and partial shading in addition to the effects of temperature rise of VIPV modules were suggested as the other power losses of VIPV-EV.
基金supported by the Key Projector of Chinese Academy of Science (No. KZCX-YW-330)the National Science Fund Fostering Talents in Basic Research to Glaciology and Geocryology (Grant No. J0630966)
基金The Youth Talent Support Program of the Laboratory for Marine Ecology and Environmental SciencePilot National Laboratory for Marine Science and Technology(Qingdao)under contract No.LMEESYTSP-2018-04-02+3 种基金the Creative Team Project of the Laboratory for Marine Ecology and Environmental SciencePilot National Laboratory for Marine Science and Technology(Qingdao)under contract No.LMEES-CTSP-2018-4the Central Public-interest Scientific Institution Basal Research FundCAFS under contract No.2020TD50。
文摘Growth and energy budget of marine amphipod juvenile Eogammarus possjeticus at different temperatures(20℃,24℃,26℃,28℃,30℃,32℃ and 34℃)were investigated in this study.The results showed that the cumulative mortality rate increased significantly with rising temperature(p<0.01),and exceeded 50%after 24 h when temperature was above 30℃.With the temperature increasing from 20℃ to 26℃,the ingestion rate and absorption rate increased,but decreased significantly above 28℃(p<0.01),indicating a decline in feeding ability at high temperatures.The specific growth rate increased with rising temperature,but decreased significantly(p<0.01)after reaching the maximum value at 24℃.Similarly,the oxygen consumption and ammonia emission rates also showed a trend of first increase and then decrease.However,the O:N ratio decreased first and then increased with rising temperature,indicating that the energy demand of E.possjeticus juvenile transferred from metabolism of carbohydrate and lipid to protein.In the energy distribution of amphipods,the proportion of each energy is different.With rising temperature,the ratio of the energy deposited for growth accounted for ingested gross energy showing a trend of decrease,while the energy lost to respiration,ammonia excretion,and feces accounted for ingested gross energy being showed a trend of increase.It seemed that rising temperature increased the metabolism and energy consumption of the amphipods and,meanwhile,decreased the energy used for growth,which may be an important reason for the slow growth and small body size of the amphipods during the summer high-temperature period.
文摘This standard specifies the definitions, theory, apparatus, specimens, procedures, test results and disposal, test error and report of test method for refractoriness under load of refractory products (non-differential, with rising temperature).
基金supported by the National Natural Science Foundation of China(Nos.51966013,52066013)the Special Fund of Inner Mongolia Education Department(No.STZC202230).
文摘To solve the problems of large losses and low productivity of permanent magnet synchronous generators used in wind power systems,the field-circuit coupling method is used to accurately solve the electromagnetic field and temperature field of the generator.The loss distribution of the motor is accurately obtained by considering the influence of external circuit characteristics on its internal physical field.By mapping the losses to the corresponding part of the three-dimensional finite element model of the motor,the temperature field is solved,and the global temperature distribution of the generator,considering the influence of end windings,is obtained.By changing the air gap length,permanent magnet thickness,and winding conductivity,the relationship between the loss,temperature rise,and exergy efficiency can be obtained.By optimizing the air gap length,permanent magnet thickness,and winding conductivity,the best configuration and material properties can improve the efficiency of the motor by up to 4%.
基金The National Key R&D Program of China under contract No.2016YFC1402701the National Natural Science Foundation of China under contract Nos 41941010,41531069 and 41476162
文摘This study explores the ice flow acceleration(21.1%)of Pedersenbreen during 2016–2017 after the extremely warm winter throughout the whole Arctic in 2015/2016 using in situ data and quantitatively analyses the factors contributing to this acceleration.Several data sets,including 2008–2018 air temperature data from Ny-?lesund,ten-year in situ GPS measurements and Elmer/Ice ice flow modelling under different ice temperature scenarios,suggest that the following factors contributed to the ice flow acceleration:the softened glacier ice caused by an increase in the air temperature(1.5℃)contributed 2.7%–30.5%,while basal lubrication contributed 69.5%–97.3%.The enhanced basal sliding was mostly due to the increased surface meltwater penetrating to the bedrock under the rising air temperature conditions;consequently,the glacier ice flow acceleration was caused mainly by an increase in subglacial water.For Pedersenbreen,there was an approximately one-year time lag between the change in air temperature and the change in glacier ice flow velocity.
基金Funded by the National Natural Science Foundation of China(Nos.51109071,51209219)Jiangsu Province Natural Science Foundation(No.BK2010517)
文摘Recent achievements in concrete hydration exothermic models based on Arrhenius equation have improved computation accuracy for mass concrete temperature field. But the properties of the activation energy and the gas constant (Ea/R) have not been well studied yet. From the latest experiments it is shown that Ea/R obviously changes with the hydration degree without fixed form. In this paper, the relationship between hydration degree and Ea/R is studied and a new hydration exothermic model is proposed. With those achievements, the mass concrete temperature field with arbitrary boundary condition can be calculated more precisely.
基金Supported by National Natural Science Foundation of China(Grant No.51275395)Major National Basic Research Program of China(973 Program,Grant Nos.2009CB724304-2,2009CB724404)
文摘Ultra-high speed machining technology enables high efficiency, high precision and high integrity of machined surface. Previous researches of hybrid bearing rarely consider influences of solid particles in lubricant and ultra-high speed of hybrid bearing, which cannot be ignored under the high speed and micro-space conditions of ultra-high speed water-lubricated hybrid bearing. Considering the impact of solid particles in lubricant, turbulence and temperature viscosity effects of lubricant, the influences of particles on pressure distribution, loading capacity and the temperature rise of the lubricant film with four-step-cavity ultra-high speed water-lubricated hybrid bearing are presented in the paper. The results show that loading capacity of the hybrid bearing can be affected by changing the viscosity of the lubricant, and large particles can improve the bearing loading capacity higher. The impact of water film temperature rise produced by solid particles in lubricant is related with particle diameter and minimum film thickness. Compared with the soft particles, hard particles cause the more increasing of water film temperature rise and loading capacity. When the speed of hybrid bearing increases, the impact of solid particles on hybrid bearing becomes increasingly apparent, especially for ultra-high speed water-lubricated hybrid bearing. This research presents influences of solid particles on the loading capacity and the temperature rise of water film in ultra-high speed hybrid bearings, the research conclusions provide a new method to evaluate the influence of solid particles in lubricant of ultra-high speed water-lubricated hybrid bearing, which is important to performance calculation of ultra-high speed hybrid bearings, design of filtration system, and safe operation of ultra-high speed hybrid bearings.
基金Funded by the National Basic Research Program of China(No.2009CB623203)the National Natural Science Foundation of China(No.50539040)the Scientific Research Foundation of Graduate School of Southeast University(No.YBJJ 0725)
文摘In order to evaluate the feasibility of using phase change materials to reduce the inner temperature rise of mass concrete, the interior temperature of normal concrete specimen under semi-adiabatic curing condition was measured. The effect of embedding phase change material(PCM) and replacing water with suspension of phase change material(SPCM) as cooling fluid were compared in the experiment. The cooling effect and the affecting factors were analyzed and calculated. The research results showed that the peak of inner temperature could be decreased obviously by the method of pre-embeding PCM in concrete, however, this method is only effective in the initial stage of cement hydration process. Besides, the volume of PCM is rather big and the PCM can not be used circularly, which means that this method can only be used under special condition and the feasibility is low. When SPCM was used as cooling fluid, the interior temperature rise of mass concrete was reduced more effectively, and the temperature grads peak around the cooling pipe was also reduced. Besides, both the SPCM consumption amount and the circulation time were decreased, and most important is that the SPCM is recyclable. The technical and economical feasibility of using SPCM to reduce the inner temperature rise of mass concrete is high.
基金funded by Grand Challenge-SUS(Sustainability Science)Grants GC002C-15SUS and GC002A-15SUS
文摘The Urban Heat Island Effect(UHI)has now become a commonly observed phenomenon worldwide.Indeed,it has become a significant environmental effect of urbanisation.In Malaysia,research results showed that UHI effects are very evident in several cities such as Kuala Lumpur and Putrajaya.UHI effect has long been observed to cause temperature of cities.
基金supported by Program for New Century Excellent Talents in University of China (06-0450)National Natural Science Foundation of China (Grant No 10474044)
文摘This paper describes the evolution of vapour bubbles and its effect on nonlinear ultrasound propagation and temperature rise through tissues for therapeutic ultrasound. An acoustic-thermo coupling algorithm incorporating nonlinearity, diffraction, and temperature-dependent tissue properties, is employed to describe nonlinear ultrasound propagation and thermal effect. Results demonstrate that an obvious migration of peak pressure toward transducer surface is observed while the position of peak temperature changes little in liver tissue before the generation of vapour bubbles, and that the boiling region enlarges towards the surface of transducer in axial direction but increases slowly in radial direction after the generation of vapour bubbles.
基金Supported by the Science and Technology Foundation of Shaanxi Key L aboratory of Physico- Inorganic Chemistry(No.2 9- 3,2 0 0 1) and the Science and Technology Foundation of Propellant and Explosive Combustion of China(No.5 14 5 5 0 10 1)
文摘A method of estimating the critical rate of temperature rise for the thermal explosion of first order autocatalytic decomposition reaction systems by using non-isothermal DSC is presented. The information was obtained on the increasing rate of temperature for the first order autocatalytic decomposition of nitrocellulose containing 13.86% nitrogen converting into the thermal explosion.
基金This work has been supported by the National Natural Science Foundation of China(51907129)Project Supported by Department of Science and Technology of Liaoning Province(2021-MS-236).
文摘Aiming at the problem of temperature rise of mine flameproof outer rotor permanent magnet synchronous motor,based on the fluid structure coupling method,the temperature distribution of motor under three cooling schemes of air cooling and water cooling are calculated respectively.For the structure I air cooling system,the influence of different number of heat sink on the maximum temperature rise and pressure drop of fluid channel is analyzed,and the parameters of heat sink are optimized.For the structure II air cooling system,the influence of setting fillet at the turn back of the fluid channel on the head loss in the fluid domain of the motor is analyzed,and the influence of different fillet radius on the head loss and the maximum temperature rise in the fluid domain is obtained.For the structure II water cooling system,the influence of different water flow speed on the maximum temperature rise of the motor is analyzed,and the influence of different assembly clearance of modular stator teeth and yoke on the maximum temperature rise of the motor is analyzed.The cooling effect and temperature rise distribution characteristics of the three cooling schemes are compared and analyzed.Finally,a water-cooled prototype is manufactured,and the temperature rise experiment is carried out,and the influence of the thermal deformation of fluid channel,stator yoke and stator teeth on the maximum temperature of the motor is analyzed.The results show that the calculated temperature field after considering the thermal deformation is closer to the experimental value,which verifies the accuracy of the calculation results,It also provides a reference for the selection and design of the cooling structure of the same type of PMSM electric roller.
文摘To solve the problem of temperature rise caused by the high power density of high-speed permanent magnet synchronous traction motors,the temperature rise of various components in the motor is analyzed by coupling the equivalent thermal circuit method and computational fluid dynamics.Also,a cooling strategy is proposed to solve the problem of temperature rise,which is expected to prolong the service life of these devices.First,the theoretical bases of the approaches used to study heat transfer and fluid mechanics are discussed,then the fluid flow for the considered motor is analyzed,and the equivalent thermal circuit method is introduced for the calculation of the temperature rise.Finally,the stator,rotor loss,motor temperature rise,and the proposed cooling method are also explored through experiments.According to the results,the stator temperature at 50,000 r/min and 60,000 r/min at no-load operation is 68℃ and 76℃,respectively.By monitoring the temperature of the air outlets inside and outside the motor at different speeds,it is also found that the motor reaches a stable temperature rise after 65 min of operation.Coupling of the thermal circuit method and computational fluid dynamics is a strategy that can provide the average temperature rise of each component and can also comprehensively calculate the temperature of each local point.We conclude that a hybrid cooling strategy based on axial air cooling of the inner air duct of the motor and water cooling of the stator can meet the design requirements for the ventilation and cooling of this type of motors.
文摘The present study aims at improving the accuracy of weather forecast by providing useful information on the behavior and response of a sounding temperature sensor.A hybrid approach relying on Computational Fluid Dynamics and a genetic algorithm(GA)is used to simulate the system represented by the bead thermistor and the surrounding air.In particular,the influence of different lead angles,sensor lead length,and lead number is considered.The results have shown that when the length of the lead wire of the bead thermistor is increased,the radiation temperature rise is reduced;when the number of lead wire is four and the angle between the lead wires is 180°,the solar radiation angle has a scarce influence on the radiation temperature rise of the sounding temperature sensor.