The adaptive mesh mesh technique is developed and applied in three dimensional numerical simulation of welding process on the base of the commercial software. Special user subroutine is worked out to accom- plish t...The adaptive mesh mesh technique is developed and applied in three dimensional numerical simulation of welding process on the base of the commercial software. Special user subroutine is worked out to accom- plish this function.This technique can make the dense mesh moving simultaneously with the heat source while the other area of the structure with much coarser mesh, greatly reducing the number of nodes and elements in the analysis.Temperature field,displacement and stress distributions during welding pro- cess me analyzed by FEM method with adaptive mesh and the analysis is also conducted with normal FEM method. The temperature field,displacement and stress distributions obtained with both methods are shown in contrast. The results show that the temperature fields and the displacement distributions of simulation on adaptive mesh correspond wery well with that of without adaptive mesh. Though the stress distributions have some difference,but the trends of the stress distribution are corresponding.The com- parison of the computing time of the two meshes indicates that the adaptive that the adaptive mesh can greatly reduce the calculation time when used for welding process.展开更多
Hydrogen diffusion coefficients of different regions in the welded joint of X80 pipeline steel were measured using the electro-chemical permeation technique. Using ABAQUS software, hydrogen diffusion in X80 pipeline s...Hydrogen diffusion coefficients of different regions in the welded joint of X80 pipeline steel were measured using the electro-chemical permeation technique. Using ABAQUS software, hydrogen diffusion in X80 pipeline steel welded joint was studied in consideration of the inhomogeneity of the welding zone, and temperature-dependent thermo-physical and mechanical properties of the metals. A three dimensional finite element model was developed and a coupled thermo-mechanical-diffusion analysis was performed. Hydrogen concentration distribution across the welded joint was obtained. It is found that the postweld residual hydrogen exhibits a non-uniform distribution across the welded joint. A maximum equivalent stress occurs in the immediate vicinity of the weld metal. The heat affected zone has the highest hydrogen concentration level, followed by the weld zone and the base metal.Simulation results are well consistent with theoretical analysis.展开更多
文摘The adaptive mesh mesh technique is developed and applied in three dimensional numerical simulation of welding process on the base of the commercial software. Special user subroutine is worked out to accom- plish this function.This technique can make the dense mesh moving simultaneously with the heat source while the other area of the structure with much coarser mesh, greatly reducing the number of nodes and elements in the analysis.Temperature field,displacement and stress distributions during welding pro- cess me analyzed by FEM method with adaptive mesh and the analysis is also conducted with normal FEM method. The temperature field,displacement and stress distributions obtained with both methods are shown in contrast. The results show that the temperature fields and the displacement distributions of simulation on adaptive mesh correspond wery well with that of without adaptive mesh. Though the stress distributions have some difference,but the trends of the stress distribution are corresponding.The com- parison of the computing time of the two meshes indicates that the adaptive that the adaptive mesh can greatly reduce the calculation time when used for welding process.
基金Project(BK2011258)supported by the Natural Science Foundation of Jiangsu Province,China
文摘Hydrogen diffusion coefficients of different regions in the welded joint of X80 pipeline steel were measured using the electro-chemical permeation technique. Using ABAQUS software, hydrogen diffusion in X80 pipeline steel welded joint was studied in consideration of the inhomogeneity of the welding zone, and temperature-dependent thermo-physical and mechanical properties of the metals. A three dimensional finite element model was developed and a coupled thermo-mechanical-diffusion analysis was performed. Hydrogen concentration distribution across the welded joint was obtained. It is found that the postweld residual hydrogen exhibits a non-uniform distribution across the welded joint. A maximum equivalent stress occurs in the immediate vicinity of the weld metal. The heat affected zone has the highest hydrogen concentration level, followed by the weld zone and the base metal.Simulation results are well consistent with theoretical analysis.
