Laser direct writing of Ga_(2)O_(3)/liquid metal-based flexible humidity sensors

Flexible and wearable humidity sensors play a vital role in daily point-of-care diagnosis and noncontact human-machine interactions.However,achieving a facile and high-speed fabrication approach to realizing flexible humidity sensors remains a challenge.In this work,a wearable capacitive-type Ga_(2)O_(3)/liquid metal-based humidity sensor is demonstrated by a one-step laser direct writing technique.Owing to the photothermal effect of laser,the Ga_(2)O_(3)-wrapped liquid metal particles can be selectively sintered and converted from insulative to conductive traces with a resistivity of 0.19Ω·cm,while the untreated regions serve as active sensing layers in response to moisture changes.Under 95%relative humidity,the humidity sensor displays a highly stable performance along with rapid response and recover time.Utilizing these superior properties,the Ga_(2)O_(3)/liquid metal-based humidity sensor is able to monitor human respiration rate,as well as skin moisture of the palm under different physiological states for healthcare monitoring.

Functionalized Hydrogel-Based Wearable Gas and Humidity Sensors

Breathing is an inherent human activity;however,the composition of the air we inhale and gas exhale remains unknown to us.To address this,wearable vapor sensors can help people monitor air composition in real time to avoid underlying risks,and for the early detection and treatment of diseases for home healthcare.Hydrogels with three-dimensional polymer networks and large amounts of water molecules are naturally flexible and stretchable.Functionalized hydrogels are intrinsically conductive,self-healing,self-adhesive,biocompatible,and room-temperature sensitive.Compared with traditional rigid vapor sensors,hydrogel-based gas and humidity sensors can directly fit human skin or clothing,and are more suitable for real-time monitoring of personal health and safety.In this review,current studies on hydrogel-based vapor sensors are investigated.The required properties and optimization methods of wearable hydrogel-based sensors are introduced.Subsequently,existing reports on the response mechanisms of hydrogel-based gas and humidity sensors are summarized.Related works on hydrogel-based vapor sensors for their application in personal health and safety monitoring are presented.Moreover,the potential of hydrogels in the field of vapor sensing is elucidated.Finally,the current research status,challenges,and future trends of hydrogel gas/humidity sensing are discussed.

Design and Implementation of Batch Calibration System for Platinum Resistance Temperature Sensors

Developing a calibration and collection system of platinum resistance temperature sensor using Python language environment can read the information returned by the serial port and automatically generate an"Temperature Sensor Calibration Record Table"excel table with the current date as the file name.It can collect data from 10 platinum resistance temperature sensors at once,achieving automation and improving work efficiency.

Study of the Preparation Technology and Mechanics of the Compound Temperature-Humidity Sensor

The development and character of compound temperature-humidity sensor were discussed in this study.The design of sampling,control and output unit of temperature-humidity sensor as well as their manufacture method and character were studied in detail.The relationship between components of humidity resistance materials and negative temperature coefficient ( NTC) thermistor materials in sampling unit of compound sensor and character of electrical resistance and temperature was obtained.Couples of character curves of compound temperature-humidity sensor and data of materials of sampling unit were shown in this paper too.

A Miniature Sensor for Measuring Reflectance, Relative Humidity, and Temperature: A Greenhouse Example

There is a growing interest in using miniature multi-sensor technology to monitor plant, soil, and environmental conditions in greenhouses and in field settings. The objectives of this study were to build a small multi-channel sensing system with ability to measure visible and near infrared light reflectance, relative humidity, and temperature, to test the light reflectance sensors for measuring spectral characteristics of plant leaves and soilless media, and to compare results of the relative humidity and temperature sensors to identical measurement obtained from a greenhouse sensor. The sensing system was built with off-the-shelf miniature multispectral spectrometers and relative humidity and temperature sensors. The spectrometers were sensitive to visible, red-edge, and near infrared light. The system was placed in a greenhouse setting and used to obtain relative reflectance measurements of plant leaves and soilless media and to record temperature and relative humidity conditions in the greenhouse. The spectrometer data obtained from plant leaf and soilless media were compatible with baseline spectral data collected with a hyperspectral spectroradiometer. The greenhouse was equipped with a relative humidity and temperature sensor. The relative humidity and temperature sensor measurements from our sensor system were strongly correlated with the relative humidity and temperature results obtained with the greenhouse sensors...

Flexible temperature sensor with high sensitivity ranging from liquid nitrogen temperature to 1200℃

Flexible temperature sensors have been extensively investigated due to their prospect of wide application in various flexible electronic products.However,most of the current flexible temperature sensors only work well in a narrow temperature range,with their application at high or low temperatures still being a big challenge.This work proposes a flexible thermocouple temperature sensor based on aerogel blanket substrate,the temperature-sensitive layer of which uses the screen-printing technology to prepare indium oxide and indium tin oxide.It has good temperature sensitivity,with the test sensitivity reaching 226.7μV℃^(−1).Most importantly,it can work in a wide temperature range,from extremely low temperatures down to liquid nitrogen temperature to high temperatures up to 1200℃,which is difficult to be achieved by other existing flexible temperature sensors.This temperature sensor has huge application potential in biomedicine,aerospace and other fields.

High-Performance and Flexible Co-Planar Integrated Microsystem of Carbon-Based All-Solid-State Micro-Supercapacitor and Real-Time Temperature Sensor

With the rapid development of flexible and portable microelectronics,the extreme demand for miniaturized,mechanically flexible,and integrated microsystems are strongly stimulated.Here,biomass-derived carbons(BDCs)are prepared by KOH activation using Qamgur precursor,exhibiting three-dimensional(3D)hierarchical porous structure.Benefiting from unobstructed 3D hierarchical porous structure,BDCs provide an excellent specific capacitance of 433 F g^(-1)and prominent cyclability without capacitance degradation after 50000 cycles at 50 A g^(-1).Furthermore,BDC-based planar micro-supercapacitors(MSCs)without metal collector,prepared by mask-assisted coating,exhibit outstanding areal-specific capacitance of 84 mF cm^(-2)and areal energy density of 10.6μWh cm^(-2),exceeding most of the previous carbon-based MSCs.Impressively,the MSCs disclose extraordinary flexibility with capacitance retention of almost 100%under extreme bending state.More importantly,a flexible planar integrated system composed of the MSC and temperature sensor is assembled to efficiently monitor the temperature variation,providing a feasible route for flexible MSC-based functional micro-devices.

Effects of Extreme Air Temperature and Humidity on the Insecticidal Expression Level of Bt Cotton

The higher survival rates of Helicoverpa amigera larvae were usually observed after adverse climate which was related to extreme temperature （T） and relative humidity （RH） stresses in transgenic Bacillus thuringiensis （Bt） cotton. The unstable resistance of Bt cotton to bollworms has been correlated with the reduced expression of CrylAc δ-endotoxin. The objective of this study was to investigate the effects of combined temperature and relative humidity stresses on the leaf CrylAc insecticidal protein expression during critical developmental stages. The study was undertaken on two transgenic cotton cultivars that share same parental background, Sikang 1 （a conventional cultivar） and Sikang 3 （a hybrid cultivar）, during the 2007 and 2008 growing seasons at the Yangzhou University Farm, Yangzhou, China. The study was arranged with two factors that consisted of temperature （two levels） and relative humidity （three levels）. The six T/RH treatments were 37℃/95%, 37℃/70%, 37℃/50%, 18℃/95%, 18℃/70%, and 18℃/50%. In 2007, the six treatments were imposed to the plants at peak flowering stage for 24 h; in 2008, the six treatments were applied to the plants at peak square, peak flowering, and peak boll stages for 48 h. The results of the study indicated that the leaf insecticidal protein expression in CrylAc was significantly affected by extreme temperature only at peak flowering stage, and by both extreme temperature and relative humidity during boll filling stage. The greatest reductions were observed when the stresses were applied at peak boll stage. In 2008, after 48 h stress treatment, the leaf Bt endotoxin expression reduced by 25.9-36.7 and 23.6-40.5% at peak boll stage, but only by 14.9-26.5 and 12.8-24.0% at peak flowering stage for Sikang 1 and Sikang 3, respectively. The greatest reduction was found under the low temperature combined with low relative humidity condition for both years. It is believed that the temperature and relative humidity stresses may be attributed to the reduced efficacy of Bt cotton in growing conditions in China, where extreme temperatures often increase up to 35-40℃ and/or decrease down to 15-20℃, and relative humidity may reach to 85-95% and/or reduce to 40-55% during the cotton growing season.

Spatial distribution of air temperature and relative humidity in the greenhouse as affected by external shading in arid climates

The effect of external roof shading on the spatial distribution of air temperature and relative humidity in a greenhouse(Tin and RHin) was evaluated under the arid climatic conditions of Riyadh City, Saudi Arabia. Two identical, evaporatively-cooled, single-span greenhouses were used in the experiment. One greenhouse was externally shaded(Gs) using a movable black plastic net(30% transmissivity), and the other greenhouse was kept without shading(Gc). Strawberry plants were cultivated in both greenhouses. The results showed that the spatial distribution of the Tin and RHin was significantly affected by the outside solar radiation and evaporative cooling operation. The regression analysis showed that when the outside solar radiation intensity increased from 200 to 800 W m–2, the Tin increased by 4.5℃ in the Gc and 2℃in the Gs, while the RHin decreased by 15% in the Gc and 5% in the Gs, respectively. Compared with those in the Gc, more uniformity in the spatial distribution of the Tin and RHin was observed in the Gs. The difference between the maximum and minimum Tin of 6.4℃ and the RHin of 10% was lower in the Gs than those in the Gc during the early morning. Around 2℃ difference in the Tin was shown between the area closed to the exhausted fans and the area closed to the cooling pad with the external shading. In an evaporatively-cooled greenhouse in arid regions, the variation of the Tin and RHin in the vertical direction and along the sidewalls was much higher than that in the horizontal direction. The average variation of the Tin and RHin in the vertical direction was 5.2℃ and 10% in the Gc and 5.5℃ and 13% in the Gs, respectively. The external shading improved the spatial distribution of the Tin and RHin and improved the cooling efficiency of the evaporative cooling system by 12%, since the transmitted solar radiation and accumulated thermal energy in the greenhouse were significantly reduced.

Circadian Rhythm of Calling Behavior in the Emei Music Frog(Babina daunchina) is Associated with Habitat Temperature and Relative Humidity

Generally, the function of vocalizations made by male anurans are to attract females or defend resources. Typically, males vocalize in choruses during one or more periods in a twenty-four-hour cycle, which varies, however, among species. Nevertheless, the causal factors influencing circadian variations of calling patterns in anuran species are not clear. In this study, male chorus vocalizations were monitored in the Emei music frog(Babina daunchina) for 17 consecutive days during the breeding season, while its habitat air temperature and relative humidity in the course of experiments were measured as well. The results revealed that the circadian calling patterns were characterized by two periods of peak vocalization, which were observed from 0500 h to 0700 h and from 1300 h to 2000 h, while the lowest activity period was found from 2100 h to 2200 h. Both calls/h and notes/h were positively correlated with air temperature and negatively with relative humidity. Overall, our data indicate that the Emei music frogs(B. daunchina) could regulate their vocal activities based on the changes of physical micro-environment(e. g., temperature or humidity) to maximize reproductive success.

Effects of Temperature,Humidity and Different Rice Growth Stages on Vertical Migration of Aphelenchoides besseyi

The vertical migration of Aphelenchoides besseyi under different temperatures and humidities and at different rice growth stages was investigated. It was found that the optimum temperature for the development and reproduction of A. besseyiwas 25-30℃. At the same temperature, the rate of vertical migration increased with rising relative humidity. Artificial inoculation tests showed that at the elongation stage, nematodes survived mainly on the upper and middle parts of rice culms and the number of nematodes decreased by 50% at 20 days after inoculation compared with that at 5 days after inoculation. Whereas at the booting stage, nematodes accumulated in young panicles and reproduced quickly,, and the average number of nematodes at 20 days after inoculation increased to 164.5, three times of that at 5 days after inoculation.

Seasonal Variation in Air Temperature and Relative Humidity on Building Areas and in Green Spaces in Beijing, China

The cooling and humidifying effects of urban parks are an essential component of city ecosystems in terms of regulating microclimates or mitigating urban heat islands(UHIs).Air temperature and relative humidity are two main factors of thermal environmental comfort and have a critical impact on the urban environmental quality of human settlements.We measured the 2-m height air temperature and relative humidity at the Beijing Olympic Park and a nearby building roof for more than 1 year to elucidate seasonal variations in air temperature and relative humidity,as well as to investigate the outdoor thermal comfort.The results showed that the lawn of the park could,on average,reduce the air temperature by(0.80±0.19)℃,and increase the relative humidity by(5.24±2.91)% relative to the values measured at the building roof during daytime.During the nighttime,the lawn of the park reduced the air temperature by(2.64±0.64)℃ and increased the relative humidity by(10.77±5.20)%.The park was cooler and more humid than surrounding building area,especially in night period(more pronounced cooling with 1.84℃).Additionally,the lawn of the park could improve outdoor thermal comfort through its cooling and humidifying effects.The level of thermal comfort in the park was higher than that around the building roof for a total of 11 days annually in which it was above one or more thermal comfort levels(average reduced human comfort index of 0.92)except during the winter.

Visco-elastic-plastic model of deep underground rock affected by temperature and humidity

As the depth of exploitation increases,studies on constitutive models of rock affected by temperature and humidity become very important.Based on the Nishihara model,a visco-elastic-plastic rock model was established by using the coefficients of thermal and humidity expansion,thermal viscosity attenuation,humid viscosity attenuation and acceleration rheology components.We used the definition of a controlled heat circle to explain the model.The results show that the behavior of rock,affected by temperature and humidity,is stable as a function of time when the stress is lower than the first yield stress σS1;the creep rate will increase due to the effect of temperature and humidity when the stress is greater than or equal to σS1;the creep rate will accelerate at an increasing rate when the stress is greater than or equal to the second yield stress σS2,which results in a failure of the roadway.The model derived in this study can completely describe visco-elastic-plastic characteristics and reflects the three stages of rock creep.

Orange dye polyaniline composite based impedance humidity sensors

This study presents the fabrication and investigation （PANI） composite films. A blend of 3 wt.% OD with 1 of humidity sensors based on orange dye （OD） and polyaniline wt.% PANI was prepared in 1 ml water. The composite films were deposited on glass substrates between pre-deposited silver electrodes. The gap between the electrodes was 45 um. The sensing mechanism was based on the impedance and capacitance variations due to the absorption/desorption of water vapor. It was observed that with the increase in relative humidity （RH） from 30% to 90%, the impedance decreases by 5.2 × 10^4 and 8.8 × 10^3 times for the frequencies of 120 Hz and 1 kHz, respectively. The impedance-humidity relationship showed a more uniform change compared to the capacitance-humidity relationship in the RH range of 30% to 90%. The consequence of annealing, measuring frequency, response and recovery time, and absorption-desorption behavior of the humidity sensor were also discussed in detail. The annealing resulted in an increase in sensitivity of up to 2.5 times, while the measured response time and recovery time were 34 s and 450 s, respectively. The impedance-humidity relationship was simulated.

Room-Temperature Gas Sensors Under Photoactivation:From Metal Oxides to 2D Materials

Room-temperature gas sensors have aroused great attention in current gas sensor technology because of deemed demand of cheap,low power consumption and portable sensors for rapidly growing Internet of things applications.As an important approach,light illumination has been exploited for room-temperature operation with improving gas sensor's attributes including sensitivity,speed and selectivity.This review provides an overview of the utilization of photoactivated nanomaterials in gas sensing field.First,recent advances in gas sensing of some exciting different nanostructures and hybrids of metal oxide semiconductors under light illumination are highlighted.Later,excellent gas sensing performance of emerging two-dimensional materialsbased sensors under light illumination is discussed in details with proposed gas sensing mechanism.Originated impressive features from the interaction of photons with sensing materials are elucidated in the context of modulating sensing characteristics.Finally,the review concludes with key and constructive insights into current and future perspectives in the light-activated nanomaterials for optoelectronic gas sensor applications.

MoS2 Nanosheets Sensitized with Quantum Dots for Room-Temperature Gas Sensors

The Internet of things for environment monitoring requires high performance with low power-consumption gas sensors which could be easily integrated into large-scale sensor network.While semiconductor gas sensors have many advantages such as excellent sensitivity and low cost,their application is limited by their high operating temperature.Two-dimensional(2D)layered materials,typically molybdenum disulfide(MoS2)nanosheets,are emerging as promising gas-sensing materials candidates owing to their abundant edge sites and high in-plane carrier mobility.This work aims to overcome the sluggish and weak response as well as incomplete recovery of MoS2 gas sensors at room temperature by sensitizing MoS2 nanosheets with PbS quantum dots(QDs).The huge amount of surface dangling bonds of QDs enables them to be ideal receptors for gas molecules.The sensitized MoS2 gas sensor exhibited fast and recoverable response when operated at room temperature,and the limit of NO2 detection was estimated to be 94 ppb.The strategy of sensitizing 2D nanosheets with sensitive QD receptors may enhance receptor and transducer functions as well as the utility factor that determine the sensor performance,offering a powerful new degree of freedom to the surface and interface engineering of semiconductor gas sensors.

Elevational patterns of temperature and humidity in the middle Tianshan Mountain area in Central Asia

The vertical distribution of vegetation types along an elevational gradient in mountain areas largely depends on the elevational changes in air temperature and humidity. In this study, we presented the seasonal and diurnal variations in the elevational gradients of air temperature and humidity on the southern and northern slopes in the middle Tianshan Mountain Range using data collected throughout the year via HOBO data loggers. The measurements were conducted at 12 different elevations from 1548 to 3277 m from September 2004 to August 2005. The results showed that the annual mean air temperature decreased along the elevational gradients with temperature lapse rates of(0.71±0.20)°C/100 m and(0.59±0.05)°C/100 m on the northern and southern slopes, respectively. The annual mean absolute humidity significantly decreased with increasing elevation on the northern slope but showed no significant trend on the southern slope. The annual mean relative humidity did not show a significant trend on the northern slope but increased with increasing elevation on the southern slope. The mean air temperature lapse rate exhibited significant seasonal variation, which is steeper insummer and shallower in winter, and this value varied between 0.37°C/100 m and 0.75°C/100 m on the southern slope and between 0.30°C/100 m and 1.02°C/100 m on the northern slope. The mean absolute and relative humidity also exhibited significant seasonal variations on both slopes, with the maximum occurring in summer and the minimum occurring in winter or spring. The monthly diurnal range of air temperature on both slopes was higher in spring than in winter. The annual range of air temperature on the southern slope was higher than that on the northern slope. Our results suggest that significant spatiotemporal variations in humidity and temperature lapse rate are useful when analyzing the relationships between species range sizes and climate in mountain areas.

Evolution of a Water Pendant Droplet: Effect of Temperature and Relative Humidity

As part of a better understanding of drying liquids within porous materials, measurements from 293 to 343 K of deionized water surface tension in air as a function of relative humidity are exposed. Experimental work was carried out using the pendant drop method coupled with image analysis within an adapted instrumented climatic chamber. Results show that surface tension linearly decreases when relative humidity increases. Although the effect of humidity is less compared to that of the temperature and even less compared to a surfactant impact, it must not be neglected and values have to be mentioned when dealing with water evaporation. Modifying surface tension also affects the pendant drop shape. The drying kinetics of the pendant drop volume and its outer shell are connected to this change of shape. Steam in the air can be assimilated to a wetting agent, hence a surfactant, and can be used in an environmental-friendly way to ease the drying stage. Indeed, the challenge is to limit the risk of cracking and damaging pieces during this crucial step in material processing.

One-Dimensional Variational Retrieval of Temperature and Humidity Profiles from the FY4A GIIRS

A physical retrieval approach based on the one-dimensional variational(1 D-Var) algorithm is applied in this paper to simultaneously retrieve atmospheric temperature and humidity profiles under both clear-sky and partly cloudy conditions from FY-4 A GIIRS(geostationary interferometric infrared sounder) observations. Radiosonde observations from upper-air stations in China and level-2 operational products from the Chinese National Satellite Meteorological Center(NSMC)during the periods from December 2019 to January 2020(winter) and from July 2020 to August 2020(summer) are used to validate the accuracies of the retrieved temperature and humidity profiles. Comparing the 1 D-Var-retrieved profiles to radiosonde data, the accuracy of the temperature retrievals at each vertical level of the troposphere is characterized by a root mean square error(RMSE) within 2 K, except for at the bottom level of the atmosphere under clear conditions. The RMSE increases slightly for the higher atmospheric layers, owing to the lack of temperature sounding channels there.Under partly cloudy conditions, the temperature at each vertical level can be obtained, while the level-2 operational products obtain values only at altitudes above the cloud top. In addition, the accuracy of the retrieved temperature profiles is greatly improved compared with the accuracies of the operational products. For the humidity retrievals, the mean RMSEs in the troposphere in winter and summer are both within 2 g kg^(–1). Moreover, the retrievals performed better compared with the ERA5 reanalysis data between 800 h Pa and 300 h Pa both in summer and winter in terms of RMSE.

Effect of post treatment temperature and humidity conditions onfixation performance of CCA-C treated red pine and southern pine

Rates of fixation in chromated copper arsenate (CCA-C) treated red pine (Pinus resinosa Ait.) and southern pine (Pinus spp) sapwood specimens using retention of 1.5, 2.0, 6.4 kg·m?3 are compared at temperature (T) ranging from 70°C to 50°C and 5 different relative humidity (RH) conditions. The samples were investigated using the expressate method to follow chromium fixation. Red pine fixes faster than southern pine under all 11 post treatment schedules. The fixation rates for both species are not significantly different while the blocks were fixed under 6 fixation/drying schedules that differed only in the order of T/RH conditions applied. The rate of fixation of all samples in any fixation stage were reduced when the blocks were fixed under lower humidity conditions in spite of no change in chamber temperature. Some of this influence can be attributed to the effect of humidity on heat transfer into the wood and cooling of the wood surface.