A Temperature-sensitive Hydrogel Refolding System: Preparation of Poly(N-isopropyl acrylamide) and Its Application in Lysozyme Refolding

Temperature-sensitive hydrogel—poly(N-isopropyl acrylamide) (PNIPA) was prepared and applied to protein refolding. PNIPA gel disks and gel particles were synthesized by the solution polymerization and inverse suspension polymerization respectively. The swelling kinetics of the gels was also studied. With these prepared PNIPA gels, the model protein lysozyme was renatured. Within 24h, PNIPA gel disks improved the yield of lysozyme activity by 49.3% from 3375.2U·mg^-1 to 5038.8U·mg^-1. With the addition of faster response PNIPA gel beads, the total lysozyme activity recovery was about 68.98% in 3h, as compared with 42.03% by simple batch dilution. The novel refolding system with PNIPA enables efficient refolding especially at high protein concentrations. Discussion about the mechanism revealed that when PNIPA gels were added into the refolding buffer, the hydrophobic interactions between denatured proteins and polymer gels could prevent the aggregation of refolding intermediates, thus enhanced the protein renaturation.

Preparation and Characterization of Temperature-Sensitive Hydrogels Composites by Coating Method

In this study,the hydrogels composites with coatings based on a temperature-sensitive linear copolymer of N-tert-butylacrylamide(NTBA)and acrylamide(AAm)on cotton fabrics have been developed.The cotton fabrics were coated using aqueous solution of the linear copolymer,1,2,3,4-butanetertracarboxylic acid(BTCA)as a cross-linker and sodium hypophosphite(SHP)as a catalyst,followed by drying and curing.The effects of cross-linking reaction conditions in coating process on water-impermeable ability of coated cotton fabrics were investigated in detail.The results indicate that the coated fabrics have temperature sensitivity.The coatings of poly(NTBA-co-AAm)hydrogels were bonded on the surface of the cotton fabrics,as verified by SEM and optical microscopy,which gave the water-impermeable ability to the hydrogels composites.Moreover,the hydrogels formed in the coating process also identified that - COOH of BTCA reacted with -NH2 in the linear polymer and formed three-dimensional network hydrogels.FTIR and XPS were used to characterize the cross-linking reaction of - COOH of BTCA and - OH of cellulose.

Finite deformation swelling of a temperature-sensitive hydrogel cylinder under combined extension-torsion

The swelling behavior of a temperature-sensitive poly-N-isopropylacrylamide(PNIPAM) hydrogel circular cylinder is studied subjected to combined extension-torsion and varied temperature. In this regard, a semi-analytical solution is proposed for general combined loading. A finite element(FE) analysis is conducted, subjecting a hydrogel cylinder to the combined extension-torsion and the varied temperature to evaluate the validity and accuracy of the solution. A user-defined UHYPER subroutine is developed and verified under free and constrained swelling conditions. The FE results illustrate excellent agreement with the semi-analytical solution. Due to the complexity of the problem, some compositions and applied loading factors are analyzed. It is revealed that for larger cross-linked density and larger ending temperature, the cylinder yields higher stresses and smaller radial swelling deformation. Besides, the radial and hoop stresses increase by applying larger twist and axial stretch. The hoop stresses intersect at approximately R/Rout = 0.58, where the hoop stress vanishes. Besides, the axial force has direct and inverse relationships with the axial stretch and the twist, respectively. However, the resultant torsional moment behavior is complex, and the position of the maximum point varies significantly by altering the axial stretch and the twist.

Synthesis and characteristics of pH-and temperature-sensitive hydrogels of poly （DMAEMA/NIPAAm）

A kind of novel copolymer hydrogel of poly（N, N-dimethylaminoethyl methacrylate-co-N-isopropylacrylamide） （poly[DMAEMA/NIPAAm]） was synthesized by the initiation of K2S2O8, N, N＇-methylene-bis（acrylamide） （Bis） was used as the crosslinker. The effects of monomer content, pH and temperature on swelling ratio of the hydrogel were investigated; the thermo-sensitivity in deionized water and in physiological saline was determined. It showed that the swelling ratio of the hydrogel could be changed by changing the temperature or pH alternately. Both swelling ratio and LCST （Lower Critical Solution Temperature） of the hydrogel decreased with the increase of NIPAAm in the co-polymer content.

Intranasal temperature-sensitive hydrogels of cannabidiol inclusion complex for the treatment of post-traumatic stress disorder

Post-traumatic stress disorder(PTSD)is a psychiatric disease that seriously affects brain function.Currently,selective serotonin reuptake inhibitors(SSRIs)are used to treat PTSD clinically but have decreased efficiency and increased side effects.In this study,nasal cannabidiol inclusion complex temperature-sensitive hydrogels(CBD TSGs)were prepared and evaluated to treat PTSD.Mice model of PTSD was established with conditional fear box.CBD TSGs could significantly improve the spontaneous behavior,exploratory spirit and alleviate tension in open field box,relieve anxiety and tension in elevated plus maze,and reduce the freezing time.Hematoxylin and eosin and c-FOS immunohistochemistry slides showed that the main injured brain areas in PTSD were the prefrontal cortex,amygdala,and hippocampus CA1.CBD TSGs could reduce the level of tumor necrosis factor-a caused by PTSD.Western blot analysis showed that CBD TSGs increased the expression of the 5-HT1 A receptor.Intranasal administration of CBD TSGs was more efficient and had more obvious brain targeting effects than oral administration,as evidenced by the pharmacokinetics and brain tissue distribution of CBD TSGs.Overall,nasal CBD TSGs are safe and effective and have controlled release.There are a novel promising option for the clinical treatment of PTSD.

Cell Growth and Desorption on the Surface of Temperature-sensitive Semi-IPNs Hydrogels Based on Silk Sericin

Semi-interpenetrating （semi-IPNs） hydrogels containing biocompatible silk sericin （SS） and poly（N-isopropylacrylamide）（PNIPAM） were prepared as novel cellular matrices. Their maximum swelling degree and basic characteristics for biomedical applications such as mouse ？broblasts （L929） cell proliferation and desorption were investigated. The results showed that the incorporation of high hydrophilic SS into PNIPAM hydrogel increased the maximum swelling degree of the semi-IPNs hydrogels, and the adhesion and growth of the L929 on semi-IPNs hydrogels were at least comparable to, or even better than, that on conventional PNIPAM hydrogel. In addition, L929 cells were found to detach from the hydrogels surface naturally by controlling environmental temperature. These results suggest great potential of semi-IPNs hydrogels in tissue engineering.

Preparation of silver nanoparticles through the reduction of straw-extracted lignin and its antibacterial hydrogel

Silver nanoparticles(Ag NPs)have attracted attention in the field of biomaterials due to their excellent antibacterial property.However,the reducing and stabilizing agents used for the chemical reduction of Ag NPs are usually toxic and may cause water pollution.In this work,Ag NPs(31.2 nm in diameter)were prepared using the extract of straw,an agricultural waste,as the reducing and stabilizing agent.Experimental analysis revealed that the straw extract contained lignin,the structure of which possesses phenolic hydroxyl and methoxy groups that facilitate the reduction of silver salts into Ag NPs.The surfaces of Ag NPs were negatively charged due to the encapsulation of a thin layer of lignin molecules that prevented their aggregation.After the prepared Ag NPs were added to the precursor solution of acrylamide,free radical polymerization was triggered without the need for extra heating or light irradiation,resulting in the rapid formation of an Ag NP-polyacrylamide composite hydrogel.The inhibition zone test proved that the composite hydrogel possessed excellent antibacterial ability due to the presence of Ag NPs.The prepared hydrogel may have potential applications in the fabrication of biomedical materials,such as antibacterial dressings.

Preparation of porous semi-IPN temperature-sensitive hydrogel-supported nZVI and its application in the reduction of nitrophenol

Nanoscale zero-valent iron(n ZVI) particles supported on a porous, semi-interpenetrating(semi-IPN), temperature-sensitive composite hydrogel(PNIPAm-PHEMA). n ZVI@PNIPAmPHEMA, was successfully synthesized and characterized by FT-IR, SEM, EDS, XRD and the weighing method. The loading of nZVI was 0.1548 ± 0.0015 g/g and the particle size was30–100 nm. NZVI was uniformly dispersed on the pore walls inside the PNIPAm-PHEMA.Because of the well-dispersed n ZVI, the highly porous structure, and the synergistic effect of PNIPAm-PHEMA, nZVI@PNIPAm-PHEMA showed excellent reductive activity and wide p H applicability. 95% of 4-NP in 100 m L of 400 mg/L 4-NP solution with initial p H 3.0–9.0 could be completely reduced into 4-AP by about 0.0548 g of fresh supported n ZVI at 18–25 °C under stirring(110 r/min) within 45 min reaction time. A greater than 99% 4-NP degradation ratio was obtained when the initial p H was 5.0–9.0. The reduction of 4-NP by nZVI@PNIPAm-PHEMA was in agreement with the pseudo-first-order kinetics model with Kobsvalues of 0.0885–0.101 min-1.NZVI@PNIPAm-PHEMA was able to be recycled, and about 85% degradation ratio of 4-NP was obtained after its sixth reuse cycle. According to the temperature sensitivity of PNIPAmPHEMA, n ZVI@PNIPAm-PHEMA exhibited very good storage stability, and about 88.9%degradation ratio of 4-NP was obtained after its storage for 30 days. The hybrid reducer was highly efficient for the reduction of 2-NP, 3-NP, 2-chloro-4-nitrophenol and 2-chloro-4-nitrophenol. Our results suggest that PNIPAm-PHEMA could be a good potential carrier, with n ZVI@PNIPAm-PHEMA having potential value in the application of reductive degradation of nitrophenol pollutants.

Laser‑Induced Highly Stable Conductive Hydrogels for Robust Bioelectronics

Despite the promising progress in conductive hydrogels made with pure conducting polymer,great challenges remain in the interface adhesion and robustness in longterm monitoring.To address these challenges,Prof.Seung Hwan Ko and Taek-Soo Kim’s team introduced a laserinduced phase separation and adhesion method for fabricating conductive hydrogels consisting of pure poly(3,4-ethylenedioxythiophene):polystyrene sulfonate on polymer substrates.The laser-induced phase separation and adhesion treated conducting polymers can be selectively transformed into conductive hydrogels that exhibit wet conductivities of 101.4 S cm^(−1) with a spatial resolution down to 5μm.Moreover,they maintain impedance and charge-storage capacity even after 1 h of sonication.The micropatterned electrode arrays demonstrate their potential in long-term in vivo signal recordings,highlighting their promising role in the field of bioelectronics.

Recent Strategies and Advances in Hydrogel‑Based Delivery Platforms for Bone Regeneration

Bioactive molecules have shown great promise for effectively regulating various bone formation processes,rendering them attractive therapeutics for bone regeneration.However,the widespread application of bioactive molecules is limited by their low accumulation and short half-lives in vivo.Hydrogels have emerged as ideal carriers to address these challenges,offering the potential to prolong retention times at lesion sites,extend half-lives in vivo and mitigate side effects,avoid burst release,and promote adsorption under physiological conditions.This review systematically summarizes the recent advances in the development of bioactive molecule-loaded hydrogels for bone regeneration,encompassing applications in cranial defect repair,femoral defect repair,periodontal bone regeneration,and bone regeneration with underlying diseases.Additionally,this review discusses the current strategies aimed at improving the release profiles of bioactive molecules through stimuli-responsive delivery,carrier-assisted delivery,and sequential delivery.Finally,this review elucidates the existing challenges and future directions of hydrogel encapsulated bioactive molecules in the field of bone regeneration.

3D Printing of Tough Hydrogel Scaffolds with Functional Surface Structures for Tissue Regeneration

Hydrogel scaffolds have numerous potential applications in the tissue engineering field.However,tough hydrogel scaffolds implanted in vivo are seldom reported because it is difficult to balance biocompatibility and high mechanical properties.Inspired by Chinese ramen,we propose a universal fabricating method(printing-P,training-T,cross-linking-C,PTC&PCT)for tough hydrogel scaffolds to fill this gap.First,3D printing fabricates a hydrogel scaffold with desired structures(P).Then,the scaffold could have extraordinarily high mechanical properties and functional surface structure by cycle mechanical training with salting-out assistance(T).Finally,the training results are fixed by photo-cross-linking processing(C).The tough gelatin hydrogel scaffolds exhibit excellent tensile strength of 6.66 MPa(622-fold untreated)and have excellent biocompatibility.Furthermore,this scaffold possesses functional surface structures from nanometer to micron to millimeter,which can efficiently induce directional cell growth.Interestingly,this strategy can produce bionic human tissue with mechanical properties of 10 kPa-10 MPa by changing the type of salt,and many hydrogels,such as gelatin and silk,could be improved with PTC or PCT strategies.Animal experiments show that this scaffold can effectively promote the new generation of muscle fibers,blood vessels,and nerves within 4 weeks,prompting the rapid regeneration of large-volume muscle loss injuries.

Study on Preparation of Temperature-sensitive Injectable Hydrogel

To get a sort of new scaffold material for soft tissue reconstruction,we have prepared XLHA-PNIPAAm and XLHA-MC injectable hydrogels through blending crosslinked HA(XLHA) and two temperature-sensitive materials differed in degradation poly(N-isopropylacrylamide)(PNIPAAm) and methylcellulose(MC),respectively.We tested the injectablility,enzymatic biodegradability,temperature-sensitivity,structure cytotoxicity and hemolysis of the two injectable hydrogels.Our research has successfully obtained the preparation condition of XLHA-PNIPAAm injectable hydrogel,and verified that adding non-degradable material PNIPAAm can postpone the degradation of HA more effectively than degradable material MC.PNIPAAm prepared with 5 kGy dose radiation,MBAAm/NIPAAm(M/M)=0.015,monomer concentration=3% produced XLHA-PNIPAAm with slowest enzymatic biodegradability.DSC results showed that temperature-sensitivity of the XLHA-PNIPAAm was more stable than that of XLHA-MC.Two composite hydrogels were qualified in cytotoxicity and hemolysis tests and the biocompatibility of XLHA-PNIPAAm hydrogel showed better than XLHA-MC hydrogel.

A matrix metalloproteinase-responsive hydrogel system controls angiogenic peptide release for repair of cerebral ischemia/reperfusion injury

Vascular endothelial growth factor and its mimic peptide KLTWQELYQLKYKGI(QK)are widely used as the most potent angiogenic factors for the treatment of multiple ischemic diseases.However,conventional topical drug delivery often results in a burst release of the drug,leading to transient retention(inefficacy)and undesirable diffusion(toxicity)in vivo.Therefore,a drug delivery system that responds to changes in the microenvironment of tissue regeneration and controls vascular endothelial growth factor release is crucial to improve the treatment of ischemic stroke.Matrix metalloproteinase-2(MMP-2)is gradually upregulated after cerebral ischemia.Herein,vascular endothelial growth factor mimic peptide QK was self-assembled with MMP-2-cleaved peptide PLGLAG(TIMP)and customizable peptide amphiphilic(PA)molecules to construct nanofiber hydrogel PA-TIMP-QK.PA-TIMP-QK was found to control the delivery of QK by MMP-2 upregulation after cerebral ischemia/reperfusion and had a similar biological activity with vascular endothelial growth factor in vitro.The results indicated that PA-TIMP-QK promoted neuronal survival,restored local blood circulation,reduced blood-brain barrier permeability,and restored motor function.These findings suggest that the self-assembling nanofiber hydrogel PA-TIMP-QK may provide an intelligent drug delivery system that responds to the microenvironment and promotes regeneration and repair after cerebral ischemia/reperfusion injury.

Thermal Error Modeling Method with the Jamming of Temperature-Sensitive Points'Volatility on CNC Machine Tools

Aiming at the deficiency of the robustness of thermal error compensation models of CNC machine tools, the mechanism of improving the models＇ robustness is studied by regarding the Leaderway-V450 machining center as the object. Through the analysis of actual spindle air cutting experimental data on Leaderway-V450 machine, it is found that the temperature-sensitive points used for modeling is volatility, and this volatility directly leads to large changes on the collinear degree among modeling independent variables. Thus, the forecasting accuracy of multivariate regression model is severely affected, and the forecasting robustness becomes poor too. To overcome this effect, a modeling method of establishing thermal error models by using single temperature variable under the jamming of temperature-sensitive points＇ volatility is put forward. According to the actual data of thermal error measured in different seasons, it is proved that the single temperature variable model can reduce the loss of fore- casting accuracy resulted from the volatility of tempera- ture-sensitive points, especially for the prediction of cross quarter data, the improvement of forecasting accuracy is about 5 μm or more. The purpose that improving the robustness of the thermal error models is realized, which can provide a reference for selecting the modelingindependent variable in the application of thermal error compensation of CNC machine tools.

Plant Temperature for Sterile Alteration of a Temperature-Sensitive Genic Male Sterile Rice,Peiai64S

The forecast of sterile alteration for the temperature-sensitive genic male sterile （TGMS） line in two-line hybrid rice seed production was traditionally based on screen temperature determined by weather station. The article put forward a new approach based on plant temperature, which was more exact and direct than the traditional method. The result of the simulation of the self-seeded setting rate of a widely used TGMS line, Peiai64S, by several temperature parameters and durations, showed that the fertility was directly affected by the plant temperature at a height of 20 cm or the air temperature around it in three days duration. Using the stem temperature of three days at a height of 20 cm as the simulation parameter, the fertility of Peiai64S had the maximum, minimum and optimum temperatures as 22.8, 21.7 and 22.5℃, respectively, whereas 23.2, 21.5 and 21.8℃ when using the air temperature of three days around the height of 20 cm as the parameter. Such temperature indices can be used to conclude the sterile alteration of TGMS for safeguarding seed production of twoline hybrid rice. The article also established a statistic model to conclude plant temperature by water temperatures at inflow and outflow, and air temperature and cloudage from weather station.

Nanozyme‑Engineered Hydrogels for Anti‑Inflammation and Skin Regeneration

Inflammatory skin disorders can cause chronic scarring and functional impairments,posing a significant burden on patients and the healthcare system.Conventional therapies,such as corticosteroids and nonsteroidal anti-inflammatory drugs,are limited in efficacy and associated with adverse effects.Recently,nanozyme(NZ)-based hydrogels have shown great promise in addressing these challenges.NZ-based hydrogels possess unique therapeutic abilities by combining the therapeutic benefits of redox nanomaterials with enzymatic activity and the water-retaining capacity of hydrogels.The multifaceted therapeutic effects of these hydrogels include scavenging reactive oxygen species and other inflammatory mediators modulating immune responses toward a pro-regenerative environment and enhancing regenerative potential by triggering cell migration and differentiation.This review highlights the current state of the art in NZ-engineered hydrogels(NZ@hydrogels)for anti-inflammatory and skin regeneration applications.It also discusses the underlying chemo-mechano-biological mechanisms behind their effectiveness.Additionally,the challenges and future directions in this ground,particularly their clinical translation,are addressed.The insights provided in this review can aid in the design and engineering of novel NZ-based hydrogels,offering new possibilities for targeted and personalized skin-care therapies.

An Environment‑Tolerant Ion‑Conducting Double‑Network Composite Hydrogel for High‑Performance Flexible Electronic Devices

High-performance ion-conducting hydrogels(ICHs)are vital for developing flexible electronic devices.However,the robustness and ion-conducting behavior of ICHs deteriorate at extreme tempera-tures,hampering their use in soft electronics.To resolve these issues,a method involving freeze–thawing and ionizing radiation technology is reported herein for synthesizing a novel double-network(DN)ICH based on a poly(ionic liquid)/MXene/poly(vinyl alcohol)(PMP DN ICH)system.The well-designed ICH exhibits outstanding ionic conductivity(63.89 mS cm^(-1) at 25℃),excellent temperature resistance(-60–80℃),prolonged stability(30 d at ambient temperature),high oxidation resist-ance,remarkable antibacterial activity,decent mechanical performance,and adhesion.Additionally,the ICH performs effectively in a flexible wireless strain sensor,thermal sensor,all-solid-state supercapacitor,and single-electrode triboelectric nanogenerator,thereby highlighting its viability in constructing soft electronic devices.The highly integrated gel structure endows these flexible electronic devices with stable,reliable signal output performance.In particular,the all-solid-state supercapacitor containing the PMP DN ICH electrolyte exhibits a high areal specific capacitance of 253.38 mF cm^(-2)(current density,1 mA cm^(-2))and excellent environmental adaptability.This study paves the way for the design and fabrication of high-performance mul-tifunctional/flexible ICHs for wearable sensing,energy-storage,and energy-harvesting applications.

Ionization Engineering of Hydrogels Enables Highly Efficient Salt‑Impeded Solar Evaporation and Night‑Time Electricity Harvesting

Interfacial solar evaporation holds immense potential for brine desalination with low carbon footprints and high energy utilization.Hydrogels,as a tunable material platform from the molecular level to the macroscopic scale,have been considered the most promising candidate for solar evaporation.However,the simultaneous achievement of high evaporation efficiency and satisfactory tolerance to salt ions in brine remains a challenging scientific bottleneck,restricting the widespread application.Herein,we report ionization engineering,which endows polymer chains of hydrogels with electronegativity for impeding salt ions and activating water molecules,fundamentally overcoming the hydrogel salt-impeded challenge and dramatically expediting water evaporating in brine.The sodium dodecyl benzene sulfonate-modified carbon black is chosen as the solar absorbers.The hydrogel reaches a ground-breaking evaporation rate of 2.9 kg m−2 h−1 in 20 wt%brine with 95.6%efficiency under one sun irradiation,surpassing most of the reported literature.More notably,such a hydrogel-based evaporator enables extracting clean water from oversaturated salt solutions and maintains durability under different high-strength deformation or a 15-day continuous operation.Meantime,on the basis of the cation selectivity induced by the electronegativity,we first propose an all-day system that evaporates during the day and generates salinity-gradient electricity using waste-evaporated brine at night,anticipating pioneer a new opportunity for all-day resource-generating systems in fields of freshwater and electricity.

In Situ Deposition of Drug and Gene Nanoparticles on a Patterned Supramolecular Hydrogel to Construct a Directionally Osteochondral Plug

The integrated repair of bone and cartilage boasts advantages for osteochondral restoration such as a long-term repair effect and less deterioration compared to repairing cartilage alone.Constructing multifactorial,spatially oriented scaffolds to stimulate osteochondral regeneration,has immense significance.Herein,targeted drugs,namely kartogenin@polydopamine(KGN@PDA)nanoparticles for cartilage repair and miRNA@calcium phosphate(miRNA@CaP)NPs for bone regeneration,were in situ deposited on a patterned supramolecular-assembled 2-ureido-4[lH]-pyrimidinone(UPy)modified gelation hydrogel film,facilitated by the dynamic and responsive coordination and complexation of metal ions and their ligands.This hydrogel film can be rolled into a cylindrical plug,mimicking the Haversian canal structure of natural bone.The resultant hydrogel demonstrates stable mechanical properties,a self-healing ability,a high capability for reactive oxygen species capture,and controlled release of KGN and miR-26a.In vitro,KGN@PDA and miRNA@CaP promote chondrogenic and osteogenic differentiation of mesenchymal stem cells via the JNK/RUNX1 and GSK-3β/β-catenin pathways,respectively.In vivo,the osteochondral plug exhibits optimal subchondral bone and cartilage regeneration,evidenced by a significant increase in glycosaminoglycan and collagen accumulation in specific zones,along with the successful integration of neocartilage with subchondral bone.This biomaterial delivery approach represents a significant toward improved osteochondral repair.

Biomass-enhanced Janus sponge-like hydrogel with salt resistance and highstrength for efficient solar desalination

Interfacial solar-driven evaporation technology shows great potential in the field of industrial seawater desalination, and the development ofefficient and low-cost evaporation materials is key to achieving large-scale applications. Hydrogels are considered to be promising candidates;however, conventional hydrogel-based interfacial solar evaporators have difficulty in simultaneously meeting multiple requirements, including ahigh evaporation rate, salt resistance, and good mechanical properties. In this study, a Janus sponge-like hydrogel solar evaporator (CPAS) withexcellent comprehensive performance was successfully constructed. The introduction of biomass agar (AG) into the polyvinyl alcohol (PVA)hydrogel backbone reduced the enthalpy of water evaporation, optimized the pore structure, and improved the mechanical properties. Meanwhile, by introducing hydrophobic fumed nano-silica aerogel (SA) and a synergistic foaming-crosslinking process, the hydrogel spontaneouslyformed a Janus structure with a hydrophobic surface and hydrophilic bottom properties. Based on the reduction of the evaporation enthalpy andthe modulation of the pore structure, the CPAS evaporation rate reached 3.56 kg m^(-2) h^(-1) under one sun illumination. Most importantly, owingto the hydrophobic top surface and 3D-interconnected porous channels, the evaporator could work stably in high concentrations of salt-water(25 wt% NaCl), showing strong salt resistance. Efficient water evaporation, excellent salt resistance, scalable preparation processes, and low-costraw materials make CPAS extremely promising for practical applications.