Discontinuous tape winding, which has obvious advantages in large extension ratio winding, is widely used in the molding of composites. Therefore, the research on technological parameters becomes the focus of many sch...Discontinuous tape winding, which has obvious advantages in large extension ratio winding, is widely used in the molding of composites. Therefore, the research on technological parameters becomes the focus of many scholars. However, how to accomplish the variable tension control is usually not fully considered. Accordingly, the constant extension ratio and the smoothness of winding process cannot be ensured. Aiming at the problem of tension control, this paper first gives a comparatively deep research on the control method and the interaction mechanism of tension, extension ratio, automatic lap and automatic rectification. Then, according to the winding process features, the mechanical device and the mathematical model of tension control system are established respectively. With regard to the characteristics of PID controller and fuzzy controller, the fuzzy self-tuning PID controller is designed. As a result, the variable tension control is realized during the winding and lapping process, and the constant extension ratio is guaranteed. Finally, a sample application is presented for demonstration. By presenting the variable tension control techniques for discontinuous tape winding, the constant extension ratio of tapes is achieved, the consecution and the automation degree of winding process is improved as well. Thus, the quality of wound products is guaranteed.展开更多
Surface tension of calcium aluminate refining slag was measured by the Slide method at 1823 K.Based on different levels of the MgO content and the mass ratio of CaO to Al_2O_3,the effects of MgO content and the mass r...Surface tension of calcium aluminate refining slag was measured by the Slide method at 1823 K.Based on different levels of the MgO content and the mass ratio of CaO to Al_2O_3,the effects of MgO content and the mass ratio of CaO to Al_2O_3 on surface tension were investigated.The results indicate that surface tension decreased with increasing MgO content(from 0 to 4.86%),followed by an increase with further increasing MgO content up to 11.33%.The trend that surface tension changed with the mass ratio of CaO to Al_2O_3 was the same as the trend that surface tension changed with the MgO content.The surface tension was varied from 0.617 N/m to 0.710 N/m,for the mass ratio of CaO to Al_2O_3 varying between 0.60 and 1.28.An attempt was made to estimate surface tension of CaO-Al_2O_3-MgO slag and its sub-system,and the application showed that the model worked well.展开更多
A single-phase lattice Boltzmann model with modified surface tension is developed in this paper to solve the problem of high-density-ratio free surface flow.The computational efficiency and accuracy are both enhanced....A single-phase lattice Boltzmann model with modified surface tension is developed in this paper to solve the problem of high-density-ratio free surface flow.The computational efficiency and accuracy are both enhanced.The restriction to the relaxation factor （which needs to be smaller than 1） is circumvented by the new surface tension algebra,due to its rational physical nature compared with the treatment of Xing,Buther and Yang in their paper （Comp.Mater.Sci.,2007,39（2）：282-290）.The proposed stable surface tension scheme is applied to simulate the free deformation of a square droplet with surface tension effect and the process of a droplet impinging on a liquid film.The numerical solution for free deformation of a droplet agrees well with thermodynamic principles,and also achieves high accuracy in comparison with Xing,et al.＇s model.Three typical impinging modes are successfully obtained with the new scheme,and another particular mode found by Wang and Chen is also successfully simulated.The evolutions of liquid crown agree well with the power law related to time.展开更多
基金supported by Shaanxi Provincial "13115" Important Scientific and Technological Innovation Fund of China (Grant No. 2009ZDKG-27)
文摘Discontinuous tape winding, which has obvious advantages in large extension ratio winding, is widely used in the molding of composites. Therefore, the research on technological parameters becomes the focus of many scholars. However, how to accomplish the variable tension control is usually not fully considered. Accordingly, the constant extension ratio and the smoothness of winding process cannot be ensured. Aiming at the problem of tension control, this paper first gives a comparatively deep research on the control method and the interaction mechanism of tension, extension ratio, automatic lap and automatic rectification. Then, according to the winding process features, the mechanical device and the mathematical model of tension control system are established respectively. With regard to the characteristics of PID controller and fuzzy controller, the fuzzy self-tuning PID controller is designed. As a result, the variable tension control is realized during the winding and lapping process, and the constant extension ratio is guaranteed. Finally, a sample application is presented for demonstration. By presenting the variable tension control techniques for discontinuous tape winding, the constant extension ratio of tapes is achieved, the consecution and the automation degree of winding process is improved as well. Thus, the quality of wound products is guaranteed.
基金Project(51204115)supported by the National Natural Science Foundation of ChinaProject(BK20130308)supported by the Basic Research Program of Jiangsu Province,ChinaProject(2014M561710)supported by China Postdoctoral Science Foundation
文摘Surface tension of calcium aluminate refining slag was measured by the Slide method at 1823 K.Based on different levels of the MgO content and the mass ratio of CaO to Al_2O_3,the effects of MgO content and the mass ratio of CaO to Al_2O_3 on surface tension were investigated.The results indicate that surface tension decreased with increasing MgO content(from 0 to 4.86%),followed by an increase with further increasing MgO content up to 11.33%.The trend that surface tension changed with the mass ratio of CaO to Al_2O_3 was the same as the trend that surface tension changed with the MgO content.The surface tension was varied from 0.617 N/m to 0.710 N/m,for the mass ratio of CaO to Al_2O_3 varying between 0.60 and 1.28.An attempt was made to estimate surface tension of CaO-Al_2O_3-MgO slag and its sub-system,and the application showed that the model worked well.
基金supported by the National Natural Science Foundation of China (Grant Nos.10625210,50609020 and 10902070)the Leading Academic Discipline Project of Shanghai Municipal Education Commission (Grant No.J50501)
文摘A single-phase lattice Boltzmann model with modified surface tension is developed in this paper to solve the problem of high-density-ratio free surface flow.The computational efficiency and accuracy are both enhanced.The restriction to the relaxation factor （which needs to be smaller than 1） is circumvented by the new surface tension algebra,due to its rational physical nature compared with the treatment of Xing,Buther and Yang in their paper （Comp.Mater.Sci.,2007,39（2）：282-290）.The proposed stable surface tension scheme is applied to simulate the free deformation of a square droplet with surface tension effect and the process of a droplet impinging on a liquid film.The numerical solution for free deformation of a droplet agrees well with thermodynamic principles,and also achieves high accuracy in comparison with Xing,et al.＇s model.Three typical impinging modes are successfully obtained with the new scheme,and another particular mode found by Wang and Chen is also successfully simulated.The evolutions of liquid crown agree well with the power law related to time.
