this paper describes the design of a feedback testing system for locomtive tractionmotor. The structures and features of the software and hardware of themicrocomputer control system have been studied. This testing sys...this paper describes the design of a feedback testing system for locomtive tractionmotor. The structures and features of the software and hardware of themicrocomputer control system have been studied. This testing system hasalready been put into operation successfully in several locomotive depots inChina.展开更多
In drilling field, stick-slip vibrations of the drill-string are the main reason for the failure of the drilling system. To suppress the undesired stick-slip vibrations, an observer-based state feedback control method...In drilling field, stick-slip vibrations of the drill-string are the main reason for the failure of the drilling system. To suppress the undesired stick-slip vibrations, an observer-based state feedback control method is proposed. The drilling system is described by a lumped parameter model including a Karnopp friction torque model. A state observer is designed to estimate the bit velocity in bottom hole and a state feedback controller is proposed to control the top drive velocity. By simulation, the performance of the control algorithm is demonstrated. Based on the control algorithm, a stick-slip vibration control system is developed. Test results show that the control system can effectively eliminate stick-slip vibrations of the drill-string and can be applied to the drilling field.展开更多
Safety-critical system （SCS） has highly demand for dependability, which requires plenty of resource to ensure that the system under test （SUT） satisfies the dependability requirement. In this paper, a new SCS rapi...Safety-critical system （SCS） has highly demand for dependability, which requires plenty of resource to ensure that the system under test （SUT） satisfies the dependability requirement. In this paper, a new SCS rapid testing method is proposed to improve SCS adaptive dependability testing. The result of each test execution is saved in calculation memory unit and evaluated as an algorithm model. Then the least quantity of scenario test case for next test execution will be calculated according to the promised SUT＇s confidence level. The feedback data are generated to weight controller as the guideline for the further testing. Finally, a compre- hensive experiment study demonstrates that this adaptive testing method can really work in practice. This rapid testing method, testing result statistics-based adaptive control, makes the SCS dependability testing much more effective.展开更多
One of the ingredients of anthropogenic global warming is the existence of a large correlation between carbon dioxide concentrations in the atmosphere and the temperature. In this work we analyze the original time-ser...One of the ingredients of anthropogenic global warming is the existence of a large correlation between carbon dioxide concentrations in the atmosphere and the temperature. In this work we analyze the original time-series data that led to the new wave of climate research and test the two hypotheses that might explain this correlation, namely the (more commonly accepted and well-known) greenhouse effect (GHE) and the less-known Henry’s Law (HL). This is done by using the correlation and the temporal features of the data. Our conclusion is that of the two hypotheses the greenhouse effect is less likely, whereas the Henry’s Law hypothesis can easily explain all effects. First the proportionality constant in the correlation is correct for HL and is about two orders of magnitude wrong for GHE. Moreover, GHE cannot readily explain the concurring methane signals observed. On the temporal scale, we see that GHE has difficulty in the apparent negative time lag between cause and effect, whereas in HL this is of correct sign and magnitude, since it is outgasing of gases from oceans. Introducing feedback into the GHE model can overcome some of these problems, but it introduces highly instable and chaotic behavior in the system, something that is not observed. The HL model does not need feedback.展开更多
In this paper,a fifth-order fully differential interface circuit( IC) is presented to improve the noise performance for micromechanical sigma-delta( Σ-Δ) accelerometer. A lead compensator is adopted to ensure the st...In this paper,a fifth-order fully differential interface circuit( IC) is presented to improve the noise performance for micromechanical sigma-delta( Σ-Δ) accelerometer. A lead compensator is adopted to ensure the stability of the closed-loop high-order system. A low noise capacitance detection circuit is described with a correlated-double-sampling( CDS) technique to decrease 1 /f noise and offset of the operational amplifier. This paper also proposes a self-test technique for the interface circuit to test the harmonic distortion. An electrostatic force feedback linearization circuit is presented to reduce the harmonic distortion resulting in larger dynamic range( DR). The layout of the IC is implemented in a standard 0. 6 μm CMOS technology and operates at a sampling frequency of 250 kHz. The interface consumes 20 mW from a 5 V supply. The post-simulation results indicate that the noise floor of the digital accelerometer is about- 140 dBV /Hz1 /2at low frequency. The sensitivity is 2. 5 V /g and the nonlinearity is 0. 11%. The self-test function is achieved with 98. 2 dB thirdorder harmonic distortion detection based on the electrostatic force feedback linearization.展开更多
文摘this paper describes the design of a feedback testing system for locomtive tractionmotor. The structures and features of the software and hardware of themicrocomputer control system have been studied. This testing system hasalready been put into operation successfully in several locomotive depots inChina.
文摘In drilling field, stick-slip vibrations of the drill-string are the main reason for the failure of the drilling system. To suppress the undesired stick-slip vibrations, an observer-based state feedback control method is proposed. The drilling system is described by a lumped parameter model including a Karnopp friction torque model. A state observer is designed to estimate the bit velocity in bottom hole and a state feedback controller is proposed to control the top drive velocity. By simulation, the performance of the control algorithm is demonstrated. Based on the control algorithm, a stick-slip vibration control system is developed. Test results show that the control system can effectively eliminate stick-slip vibrations of the drill-string and can be applied to the drilling field.
基金the National 863 Program under Grant No. 2006AA01Z173.
文摘Safety-critical system （SCS） has highly demand for dependability, which requires plenty of resource to ensure that the system under test （SUT） satisfies the dependability requirement. In this paper, a new SCS rapid testing method is proposed to improve SCS adaptive dependability testing. The result of each test execution is saved in calculation memory unit and evaluated as an algorithm model. Then the least quantity of scenario test case for next test execution will be calculated according to the promised SUT＇s confidence level. The feedback data are generated to weight controller as the guideline for the further testing. Finally, a compre- hensive experiment study demonstrates that this adaptive testing method can really work in practice. This rapid testing method, testing result statistics-based adaptive control, makes the SCS dependability testing much more effective.
文摘One of the ingredients of anthropogenic global warming is the existence of a large correlation between carbon dioxide concentrations in the atmosphere and the temperature. In this work we analyze the original time-series data that led to the new wave of climate research and test the two hypotheses that might explain this correlation, namely the (more commonly accepted and well-known) greenhouse effect (GHE) and the less-known Henry’s Law (HL). This is done by using the correlation and the temporal features of the data. Our conclusion is that of the two hypotheses the greenhouse effect is less likely, whereas the Henry’s Law hypothesis can easily explain all effects. First the proportionality constant in the correlation is correct for HL and is about two orders of magnitude wrong for GHE. Moreover, GHE cannot readily explain the concurring methane signals observed. On the temporal scale, we see that GHE has difficulty in the apparent negative time lag between cause and effect, whereas in HL this is of correct sign and magnitude, since it is outgasing of gases from oceans. Introducing feedback into the GHE model can overcome some of these problems, but it introduces highly instable and chaotic behavior in the system, something that is not observed. The HL model does not need feedback.
基金Sponsored by the National Natural Science Foundation of China(Grant No.61204121)the National Hi-Tech Research and Development Program of China(Grant No.2013AA041107)
文摘In this paper,a fifth-order fully differential interface circuit( IC) is presented to improve the noise performance for micromechanical sigma-delta( Σ-Δ) accelerometer. A lead compensator is adopted to ensure the stability of the closed-loop high-order system. A low noise capacitance detection circuit is described with a correlated-double-sampling( CDS) technique to decrease 1 /f noise and offset of the operational amplifier. This paper also proposes a self-test technique for the interface circuit to test the harmonic distortion. An electrostatic force feedback linearization circuit is presented to reduce the harmonic distortion resulting in larger dynamic range( DR). The layout of the IC is implemented in a standard 0. 6 μm CMOS technology and operates at a sampling frequency of 250 kHz. The interface consumes 20 mW from a 5 V supply. The post-simulation results indicate that the noise floor of the digital accelerometer is about- 140 dBV /Hz1 /2at low frequency. The sensitivity is 2. 5 V /g and the nonlinearity is 0. 11%. The self-test function is achieved with 98. 2 dB thirdorder harmonic distortion detection based on the electrostatic force feedback linearization.
