Two modeling methods of the root insert for wind turbine blade are presented,i.e.,the local mesh optimization method(LMOM)and the global modeling method(GMM).Based on the optimized mesh of the local model for the meta...Two modeling methods of the root insert for wind turbine blade are presented,i.e.,the local mesh optimization method(LMOM)and the global modeling method(GMM).Based on the optimized mesh of the local model for the metal contact interface,LMOM is proposed to analyze the load path and stress distribution characteristics,while GMM is used to calculate and analyze the stress distribution characteristics of the resin layer established between the bushing and composite layers of root insert.To validate the GMM,a tension test is carried out.The result successfully shows that the shear strain expresses a similar strain distribution tendency with the GMM′s results.展开更多
Roots play an important role in stabilizing and strengthening soil. This article aims to study the mechanical properties of the interface between soil and roots with branches, using the pullout test method in the labo...Roots play an important role in stabilizing and strengthening soil. This article aims to study the mechanical properties of the interface between soil and roots with branches, using the pullout test method in the laboratory. The mechanical properties of the soil-root with branches interface is determined through the pullout-force and root-slippage curve （F-S curve）. The results of investigating 24 Pinus tabulaeformis single roots and 55 P. tabulaeformis roots with branches demonstrated three kinds of pullout test failures： breakage failure on branching root, breakage failure on branching node, and pullout failure. The branch angle had a remarkable effect on the failure mode of the roots with branches： the maximum pullout force increased with the sum of the branch diameters and the branch angle. The peak slippage and the initial force had a positive correlation with the sum of the branch diameter. The sig- nificance test of correlation between branch angle and the initial force, however, showed they had no correlation. Branch angle and branch root diameter affect the anchorage properties between root system and soil. Therefore, it is important to investigate the anchorage mechanics of the roots with branches to understand the mechanism of root reinforcement and anchorage.展开更多
The effect of tire repeated root modal（RRM）on tire modeling with an experimental modal is studied.Firstly,a radial tire with radial and tangential RRMs is tested and analyzed.By multi-point exciting of the radial ti...The effect of tire repeated root modal（RRM）on tire modeling with an experimental modal is studied.Firstly,a radial tire with radial and tangential RRMs is tested and analyzed.By multi-point exciting of the radial tire,a multiple reference frequency domain method based on a least squares（LMS PolyMAX）algorithm is used to identify modal parameters.Then,modal stability diagram（MSD）,modal indication function（MIF）and modal assurance criteria（Auto-MAC）matrix are utilized to induce multiple inputs multiple outputs（MIMO）frequency response function（FRF）matrixes.The tests reveal that notable repeated roots exist in both radial and tangential response modes.Their modal frequencies and damping factors are approximately the same,the amplitudes of modal vectors are in the same order of magnitude,and the mode shapes are orthogonal.Based on the works mentioned,the method of trigonometric series modal shapes fitting is adopted,the effects of RRM model on tire modeling with a vertical experimental modal are discussed.The final results show that the effects of considering the RRM shapes are equivalent to the tire mode shapes depended on rotating the tire’s different exciting points during tire modeling,and since considering the RRM,the tire mode shapes can be unified and fixed during tire modeling.展开更多
基金supported jointly by the National Basic Research Program of China("973"Program)(No2014CB046200)the National Science Foundation of Jiangsu Province(No.BK2014059)+1 种基金the Priority Academic Program Development of Jiangsu Higher Education Institutionsthe National Natural Science Foundation of China(No.11172135)
文摘Two modeling methods of the root insert for wind turbine blade are presented,i.e.,the local mesh optimization method(LMOM)and the global modeling method(GMM).Based on the optimized mesh of the local model for the metal contact interface,LMOM is proposed to analyze the load path and stress distribution characteristics,while GMM is used to calculate and analyze the stress distribution characteristics of the resin layer established between the bushing and composite layers of root insert.To validate the GMM,a tension test is carried out.The result successfully shows that the shear strain expresses a similar strain distribution tendency with the GMM′s results.
基金financially supported by the Fundamental Research Funds for the Central Universities(No.YX2010-20)the National Natural Science Foundation of China(No.31570708,No.30901162)the Open Projects Foundation of Key Laboratory of Soil and Water Conservation&Desertification Combat(Beijing Forestry University),Ministry of Education of China(No.201002)
文摘Roots play an important role in stabilizing and strengthening soil. This article aims to study the mechanical properties of the interface between soil and roots with branches, using the pullout test method in the laboratory. The mechanical properties of the soil-root with branches interface is determined through the pullout-force and root-slippage curve （F-S curve）. The results of investigating 24 Pinus tabulaeformis single roots and 55 P. tabulaeformis roots with branches demonstrated three kinds of pullout test failures： breakage failure on branching root, breakage failure on branching node, and pullout failure. The branch angle had a remarkable effect on the failure mode of the roots with branches： the maximum pullout force increased with the sum of the branch diameters and the branch angle. The peak slippage and the initial force had a positive correlation with the sum of the branch diameter. The sig- nificance test of correlation between branch angle and the initial force, however, showed they had no correlation. Branch angle and branch root diameter affect the anchorage properties between root system and soil. Therefore, it is important to investigate the anchorage mechanics of the roots with branches to understand the mechanism of root reinforcement and anchorage.
文摘The effect of tire repeated root modal（RRM）on tire modeling with an experimental modal is studied.Firstly,a radial tire with radial and tangential RRMs is tested and analyzed.By multi-point exciting of the radial tire,a multiple reference frequency domain method based on a least squares（LMS PolyMAX）algorithm is used to identify modal parameters.Then,modal stability diagram（MSD）,modal indication function（MIF）and modal assurance criteria（Auto-MAC）matrix are utilized to induce multiple inputs multiple outputs（MIMO）frequency response function（FRF）matrixes.The tests reveal that notable repeated roots exist in both radial and tangential response modes.Their modal frequencies and damping factors are approximately the same,the amplitudes of modal vectors are in the same order of magnitude,and the mode shapes are orthogonal.Based on the works mentioned,the method of trigonometric series modal shapes fitting is adopted,the effects of RRM model on tire modeling with a vertical experimental modal are discussed.The final results show that the effects of considering the RRM shapes are equivalent to the tire mode shapes depended on rotating the tire’s different exciting points during tire modeling,and since considering the RRM,the tire mode shapes can be unified and fixed during tire modeling.
