Potential of plant polyphenol oxidases in the decolorization and removal of textile and non-textile dyes

In this study an effort has been made to use plant polyphenol oxidases; potato （Solanum tuberosum） and brinjal （Solanum melongena）, for the treatment of various important dyes used in textile and other industries. The ammonium sulphate fractionated enzyme preparations were used to treat a number of dyes under various experimental conditions. Majority of the treated dyes were maximally decolorized at pH 3.0. Some of the dyes were quickly decolorized whereas others were marginally decolorized. The initial first hour was sufficient for the maximum decolorization of dyes. The rate of decolorization was quite slow on long treatment of dyes. Enhancement in the dye decolorization was noticed on increasing the concentration of enzymes. The complex mixtures of dyes were treated with both preparations of polyphenol oxidases in the buffers of varying pH values. Potato polyphenol oxidase was significantly more effective in decolorizing the dyes to higher extent as compared to the enzyme obtained from brinjal polyphenol oxidase. Decolorization of dyes and their mixtures, followed by the formation of an insoluble precipitate, which could be easily removed simply by centrifugation.

Applicative Study(Part I):The Excellent Conditions to Remove in Batch Direct Textile Dyes(Direct Red,Direct Blue and Direct Yellow)from Aqueous Solutions by Adsorption Processes on Low-Cost Chitosan Films under Different Conditions

In recent years the development of chitosan (CH) based materials as useful adsorbent polymeric matrices is an expanding field in the area of adsorption science. Even though CH has been successfully used for dye removal from aqueous solutions due to its low cost, no considerations have been made about, for example, the effect of changing the pH of chitosan hydrogelor about the dehydrating effect of Ethanol (EtOH) treatment of chitosan film on the dyes removal from water. Consequently in our laboratory we carried out a study focusing the attention, mainly, on the potential use of CH films under different conditions, such as reducing the intrinsic pH, increasing the hydrophobic character by means of ethanol treatment and neutralization of CH films to improve their absorption power. Textile anionic dyes named Direct Red 83:1, Direct Yellow 86 and Direct Blue 78 have been studied with the aim of reducing the contact time of CH film in waste water improving the bleaching efficiency. Neutralized acid CH film and longtime dehydrated one result to be the better films in dye removal from water. Also the reduction of the CH solution acidity during the film preparation determines the decreasing of the contact time improving the results. The effect of initial dye concentration has been examined and the amount of dye adsorption in function of time t, qt (mg/cm2), for each analyzed film has been evaluated comparing the long term effect with the decoloration rate. A linear form of pseudo-first-order Lagergren model has been used and described. The best condition for removing all examined dyes from various dye solutions appears to be the dehydration of a novel projected CH film obtained by means of the film immersion in EtOH for 4 days. Also CH films prepared by well-known literature procedure and neutralized with NaOH treatment appear having an excellent behavior, however the film treatment requires a large quantity of water and time.

Removal of Real Textile Dyes by Electrocoagulation/Electroflotation in a Pilot External-Loop Airlift Reactor

This paper studied the efficiency of electrocoagulation/electroflotation in removing colour from real textile wastewater by using aluminum and iron electrodes in an innovative pilot external-loop airlift reactor of 150 L. The reactor was designed to operate in batch and continuous modes. The real effluent contained 90% of disperse dye and 10% of reactive dye. A complete flotation of pollutants with acceptable mixing was achieved in this reactor using only the overall liquid recirculation induced by H2 microbubbles. The treatment of these discharges was easier using electrodes of iron rather than aluminum. The optimal initial pH was 10 for both aluminum and iron electrodes. By using iron electrodes, the maximum decolourisation efficiency and COD reduction efficiency reached respectively 96% and 65% for 90 minutes of treatment. Similarly, by using aluminum electrodes, the maximum decolourisation efficiency reached 90%, COD reduction reached 51% for 120 minutes of treatment. In the case of an initial pH slightly different to 10, the required time to reach 90% ranged from double to triple.

Synthesis of activated carbons from black sapote seeds,characterization and application in the elimination of heavy metals and textile dyes

Many different techniques may be used to remove industrial pollutants from wastewater. Adsorption using activated carbon has been reported to be an effective method. This work proposes the use of a vegetable residue(black sapote seeds) as a raw material for its synthesis. These carbons were chemically activated using phosphoric acid and carbonized at 673 and 873 K. Adsorption isotherms were constructed for the textile dyes on the carbons, and this data was treated using Langmuir’s equation to quantitatively describe the adsorption process. The synthesized carbons were characterized using FTIR, EA, SEM, Nitrogen adsorption(specific surface areas of 879 and 652 m2·g-1), and their points of zero charge(2.1 and 2.3). It was possible to adsorb both heavy metals and textile dyes present in aqueous solutions and wastewaters using these activated carbons. Heavy metals were adsorbed almost completely by both carbons. Cationic dyes where adsorbed(58–59.8 mg·g-1) in greater amounts compared to anionic dyes(10–58.8 mg·g-1). The amount of anionic dyes adsorbed increased almost 30% by changing the pH of the solutions. One of the carbons was thermally regenerated on three occasions without losing its adsorption capacity and it was proved in a flow system.

Biocatalytic enhancement of laccase immobilized on ZnFe_(2)O_(4) nanoparticles and its application for degradation of textile dyes

Efficient and convenient treatment of industrial dyeing wastewater is of great significance to guarantee human and animal health.This work presented the enhanced catalytic activity at pH 3.0 of laccase immobilized on amino-functionalized ZnFe_(2)O_(4) nanoparticles(ZnFe_(2)O_(4)-laccase)and its application for the degradation of textile dyes.Due to the existence of a large number of oxygen vacancies on the surface of the ZnFe_(2)O_(4) nanoparticles,negative ions accumulated on the magnetic carriers,which resulted in a harsh optimal pH value of the ZnFe_(2)O_(4)-laccase.Laccase activity assays revealed that the ZnFe_(2)O_(4)-laccase possessed superior pH and thermal stabilities,excellent reusability,and noticeable organic solvent tolerance.Meanwhile,the ZnFe_(2)O_(4) laccase presented efficient and sustainable degradation of high concentrations of textile dyes.The initial decoloration efficiencies of malachite green(MG),brilliant green(BG),azophloxine,crystal violet(CV),reactive blue 19(RB19),and procion red MX-5B were approximately 99.1%,95.0%,93.3%,87.4%,86.1%,and 85.3%,respectively.After 10 consecutive reuses,the degradation rates of the textile dyes still maintained about 98.2%,92.5%,83.2%,81.5%,79.8%and 65.9%,respectively.The excellent dye degradation properties indicate that the ZnFe_(2)O_(4)-laccase has a technical application in high concentrations of dyestuff treatment.

Production of laccase by Coriolus versicolor and its application in decolorization of dyestuffs: (Ⅱ) Decolorization of dyes by laccase containing fermentation broth with or without self-immobilized mycelia

The capability of decolorization for commercial dyes by Coriolus versicolor fermentation broth containing laccase with or without immobilized mycelium was evaluated. With cell free fermentation broth containing laccase, high decolorization ratio was achieved for acid orange 7, but not for the other dyes concerned. The immobilized mycelium was proved to be more efficient than the cell free system. All the four dyestuffs studied were found being decolourized with certain extent by immobilized mycelium. The repeated batch decolorization was carried out with satisfactory results. The experimental data showed that the continuous decolorization of wastewater from a printing and dyeing industry was possible by using the self immobilized C. Versicolor.

Production of laccase by Coriolus versicolor and its application in decolorization of dyestuffs: (Ⅰ) Production of laccase by batch and repeated-batch processes

The production of laccase by Coriolus versicolor was studied. The effect of cultivation conditions on laccase production by Coriolus versicolor was examined to obtain optimal medium and cultivation conditions. Both batch and repeated batch processes were performed for laccase production. In repeated batch fermentation with self immobilized mycelia, total of 14 cycles were performed with laccase activity in the range between 3.4 and 14.8 U/ml.

Influence of particle size and salinity on adsorption of basic dyes by agricultural waste: dried Seagrape (Caulerpa lentillifera)

Green macroalga Caulerpa lentillifera was found to have reasonable adsorption capacity for basic dyes, Astrazon Blue FGRL （AB）, Astrazon Red GTLN （AR）, and Astrazon Golden Yellow GL-E （AY）. The initial dye concentration was in the range of 100-1,800 mg/L. The dried algal sorbent was ground and sieved into 3 sizes： S （0.1-0.84 mm）, M （0.84-2.0 mm）, and L sizes （larger than 2.0 mm）. For all conditions examined in this work （at 25℃ in batch systems）, the adsorption reached equilibrium within the first hour. The kinetic data corresponded well with the pseudo second order kinetic model where the rate constant, k2, decreased as the sorbent size increased for all dyes. The adsorption isotherms followed both Langmuir and Freundlich models. Among three sorbent sizes, S size gave the highest adsorption capacity followed by M and L sizes. A reduction of sorbent size increased the specific surface area for mass transfer, and also increased the total pore volume, thus providing more active sites for adsorption. The adsorption of AB was adversely influenced by the protonation of algal surface at low pH. On the other hand, the adsorption of AR and AY could be due to weak electrostatic interaction, which was not significantly affected by pH. Increasing salinity of the system caused a decrease in adsorption capacity possibly due to the competition between Na^＋ and the dye cations for the binding sites on algal surface. Moreover, an increase in salinity generated a compressed electrical double layer on the algal surface which exerted repulsive force, retarding the adsorption of positive charged molecules such as the basic dyes.

Treatment of Textile Dye Effluent Using a Self-made Positively Charged Nanofiltration Membrane

A selfmade positively charged nanofiltration （NF） membrane was used to treat textile dye effluent to generate water for reuse, and the factors affecting nanofiltration process such as operating pressure, feed flow and membrane cleaning were investigated. With an applied pressure of 1.0 MPa and a feed flow of 40 L/h, this NF membrane has a removal of 93.3% for CODor and a reduction of approximately 51.0% in TDS, salinity and conductivity achieving the chroma removal of 100%. The permeate obtained through this membrane is suitable for recycling. Moreover, the membrane could be reused after being cleaned with 1% NaOH solution.

Energetic,bio-oil,biochar,and ash performances of co-pyrolysis-gasification of textile dyeing sludge and Chinese medicine residues in response to K_(2)CO_(3),atmosphere type,blend ratio,and temperature

Hazardous waste stream needs to be managed so as not to exceed stock-and rate-limited properties of its recipient ecosystems.The co-pyrolysis of Chinese medicine residue(CMR)and textile dyeing sludge(TDS)and its bio-oil,biochar,and ash quality and quantity were characterized as a function of the immersion of K_(2)CO_(3),atmosphere type,blend ratio,and temperature.Compared to the mono-pyrolysis of TDS,its co-pyrolysis performance with CMR(the comprehensive performance index(CPI))significantly improved by 33.9%in the N_(2)atmosphere and 33.2%in the CO_(2)atmosphere.The impregnation catalyzed the co-pyrolysis at 370℃,reduced its activation energy by 77.3 kJ/mol in the N_(2)atmosphere and 134.6 kJ/mol in the CO_(2)atmosphere,and enriched the degree of coke gasification by 44.25%in the CO_(2)atmosphere.The impregnation increased the decomposition rate of the co-pyrolysis by weakening the bond energy of fatty side chains and bridge bonds,its catalytic and secondary products,and its bio-oil yield by 66.19%.Its bio-oils mainly contained olefins,aromatic structural substances,and alcohols.The immersion of K_(2)CO_(3)improved the aromaticity of the copyrolytic biochars and reduced the contact between K and Si which made it convenient for Mg to react with SiO_(2)to form magnesium-silicate.The co-pyrolytic biochar surfaces mainly included-OH,-CH_(2),C=C,and Si-O-Si.The main phases in the co-pyrolytic ash included Ca_(5)(PO_(4))_(3)(OH),Al_(2)O_(3),and magnesium-silicate.

Formation of organic chloride in the treatment of textile dyeing sludge by Fenton system

In the oxidation treatment of textile dyeing sludge,the quantitative and transformation laws of organic chlorine are not clear enough.Thus,this study mainly evaluated the treatment of textile dyeing sludge by Fenton and Fenton-like system from the aspects of the influence of Cl^(-),the removal of polycyclic aromatic hydrocarbons (PAHs) and organic carbon,and the removal and formation mechanism of organic chlorine.The results showed that the organic halogen in sludge was mainly hydrophobic organic chlorine,and the content of adsorbable organic chlorine (AOCl) was 0.30 mg/g (dry sludge).In the Fenton system with pH=3,500 mg/L Cl-,30 mmol/L Fe^(2+)and 30 mmol/L H_(2)O_(2),the removal of phenanthrene was promoted by chlorine radicals (·Cl),and the AOCl in sludge solid phase increased to 0.55 mg/g (dry sludge) at 30 min.According to spectral analysis,it was found that ·Cl could chlorinate aromatic and aliphatic compounds (excluding PAHs) in solid phase at the same time,and eventually led to the accumulation of aromatic chlorides in solid phase.Strengthening the oxidation ability of Fenton system increased the formation of organic chlorines in liquid and solid phases.In weak acidity,the oxidation and desorption of superoxide anion promoted the removal and migration of PAHs and organic carbon in solid phase,and reduced the formation of total organic chlorine.The Fenton-like system dominated by nonhydroxyl radical could realize the mineralization of PAHs,organic carbon and organic chlorines instead of migration.This paper builds a basis for the selection of sludge conditioning methods.

Adsorption in combination with ozonation for the treatment of textile waste water： a critical review

Intrusion of synthetic textile dyes in the ecosystem has been recognized as a serious issue worldwide. The effluents generated from textiles contain large amount of recalcitrant unfixed dyes which are regarded as emerging contaminants in the field of waste water study. Removal of various toxic dyes often includes diverse and complex set of physico-chemical, biological and advanced oxidation processes adopted for treatment. Adsorption in itself is a well-known technique utilized for treatment of textile effluents using a variety of adsorbents. In addition, ozonation deals with effective removal of dyes using high oxidising power of ozone. The review summarizes dye removal study by a combination of ozonation and adsorption methods. Also, to acquire an effective interpretation of this combined approach of treating wastewater, a thorough study has been made which is deliberated here. Results assert that, with the combined ability of ozone and a catalyst/adsorbent, there is high possibility of total elimination of dyes from waste water. Several synthetically prepared materials have been used along with few natural materials during the combined treatment. However, considering practical applicability, some areas were identified during the study where work needs to be done for effective implementation of the combined treatment.

Dissolved organic matter removal using magnetic anion exchange resin treatment on biological effluent of textile dyeing wastewater

This study investigated the removal of dissolved organic matter（DOM） from real dyeing bio-treatment effluents（DBEs） with the use of a novel magnetic anion exchange resin（NDMP）.DOMs in two typical DBEs were fractionized using DAX-8/XAD-4 resin and ultrafiltration membranes. The hydrophilic fractions and the low molecular weight（MW）（〈3 kDa） DOM fractions constituted a major portion（〉50%） of DOMs for the two effluents. The hydrophilic and low MW fractions of both effluents were the greatest contributors of specific UV254absorbance（SUVA254）,and the SUVA254 of DOM fractions decreased with hydrophobicity and MW. Two DBEs exhibited acute and chronic biotoxicities. Both acute and chronic toxicities of DOM fractions increased linearly with the increase of SUVA254 value. Kinetics of dissolved organic carbon（DOC） removal via NDMP treatment was performed by comparing it with that of particle active carbon（PAC）. Results indicated that the removal of DOC from DBEs via NDMP was 60%,whereas DOC removals by PAC were lower than 15%. Acidic organics could be significantly removed with the use of NDMP. DOM with large MW in DBE could be removed significantly by using the same means. Removal efficiency of NDMP for DOM decreased with the decrease of MW. Compared with PAC,NDMP could significantly reduce the acute and chronic bio-toxicities of DBEs. NaCl/NaOH mixture regenerants,with selected concentrations of 10% NaCl（m/m）/1%NaOH（m/m）,could improve desorption efficiency.

Removal of C.I.Reactive Red 2 by low pressure UV/chlorine advanced oxidation

Azo dyes are commonly found as pollutants in wastewater from the textile industry,and can cause environmental problems because of their color and toxicity.The removal of a typical azo dye named C.I.Reactive Red 2（RR2） during low pressure ultraviolet（UV）/chlorine oxidation was investigated in this study.UV irradiation at 254 nm and addition of free chlorine provided much higher removal rates of RR2 and color than UV irradiation or chlorination alone.Increasing the free chlorine dose enhanced the removal efficiency of RR2 and color by UV/chlorine oxidation.Experiments performed with nitrobenzene（NB）or benzoic acid（BA） as scavengers showed that radicals（especially OH） formed during UV/chlorine oxidation are important in the RR2 removal.Addition of HCO_3^- and Cl^- to the RR2 solution did not inhibit the removal of RR2 during UV/chlorine oxidation.