Testing-effort（TE） and imperfect debugging（ID） in the reliability modeling process may further improve the fitting and prediction results of software reliability growth models（SRGMs）. For describing the S-shaped...Testing-effort（TE） and imperfect debugging（ID） in the reliability modeling process may further improve the fitting and prediction results of software reliability growth models（SRGMs）. For describing the S-shaped varying trend of TE increasing rate more accurately, first, two S-shaped testing-effort functions（TEFs）, i.e.,delayed S-shaped TEF（DS-TEF） and inflected S-shaped TEF（IS-TEF）, are proposed. Then these two TEFs are incorporated into various types（exponential-type, delayed S-shaped and inflected S-shaped） of non-homogeneous Poisson process（NHPP）SRGMs with two forms of ID respectively for obtaining a series of new NHPP SRGMs which consider S-shaped TEFs as well as ID. Finally these new SRGMs and several comparison NHPP SRGMs are applied into four real failure data-sets respectively for investigating the fitting and prediction power of these new SRGMs.The experimental results show that：（i） the proposed IS-TEF is more suitable and flexible for describing the consumption of TE than the previous TEFs;（ii） incorporating TEFs into the inflected S-shaped NHPP SRGM may be more effective and appropriate compared with the exponential-type and the delayed S-shaped NHPP SRGMs;（iii） the inflected S-shaped NHPP SRGM considering both IS-TEF and ID yields the most accurate fitting and prediction results than the other comparison NHPP SRGMs.展开更多
Shanghai,arelatlvely developed region ofChlna In economy andeducatlon;Isstill facing the critical problem ofhuman resources scarcity and low competence oflabourers In order to become a modern metropolis,one of the Int...Shanghai,arelatlvely developed region ofChlna In economy andeducatlon;Isstill facing the critical problem ofhuman resources scarcity and low competence oflabourers In order to become a modern metropolis,one of the Internatlonaleconomlc,nnanclal and trade centres.Statistics show thatthe city Is In need of600,000 highquahtled personnel by 2000.As Shanghai Is speeding up the adjustment ofindustrlalstructure,new and high tech Industries as well as knowledge-Intensive Industries areconstantly springing tip,and even In labourlntenslve Industries,the science andtechnology contentsbave also been Increasing,so It’s extremely urgent to trainurgently needed personnel and improve workers’competence universally.The municipal government of Shanghai thlllks highly of open education,andShanghai Education Commission（SEC）also sets It as one of＊thesion important tasks ofShanghai’s educational development. At present,SEC Is drafting the ninth nve、year plan for educational developmentandthe 2010’s target,ofwhich展开更多
Bicycles are generally considered "Green Vehicles", with their cheap price and easy maintenance. China, known as the "Kingdom of Bicycles", has the largest output and export volume of whole bikes, ...Bicycles are generally considered "Green Vehicles", with their cheap price and easy maintenance. China, known as the "Kingdom of Bicycles", has the largest output and export volume of whole bikes, but the industry has been in difficulties in recent years. The blind import of international capital is the main reason for the decline of the bicycle industry in the country. In the mid 1980s, cheap labor and optimistic market forecasts attracted international capital to China’s bicycle indus-展开更多
The Eighth Five-year Plan period wasa fast growing period for Jiangsu’sforeign economic and technical co-operation. Guided by the policy of seizingopportunities, expanding the opening driveand promoting development, ...The Eighth Five-year Plan period wasa fast growing period for Jiangsu’sforeign economic and technical co-operation. Guided by the policy of seizingopportunities, expanding the opening driveand promoting development, all the staff atthe provincial foreign economic front madeevery effort to fulfill the goal of the sus-tained, fast and healthy development in for-展开更多
Zhejiang’s machine-building industryhas made sustained efforts to increase itsexports through the combination ofindustry and trade. In the past decade,Zhejiang’s export volume of mechanicaland electrical products ha...Zhejiang’s machine-building industryhas made sustained efforts to increase itsexports through the combination ofindustry and trade. In the past decade,Zhejiang’s export volume of mechanicaland electrical products has increased over 10times, becoming the leading exports fromthe province. Zhejiang has thereforebecome an important province exportingmachinery in China.展开更多
The third thematic seminar of the Stories of the Communist Party of China(CPC)series focusing on party-building,with'Building a Well-disciplined Party in All Aspects:The Practice of Shanxi'as its theme,was hel...The third thematic seminar of the Stories of the Communist Party of China(CPC)series focusing on party-building,with'Building a Well-disciplined Party in All Aspects:The Practice of Shanxi'as its theme,was held in Beijing on June 30.Song Tao,Minister of the International Department of the CPC Central Committee(IDCPC),Luo Huining,Secretary of the CPC Shanxi展开更多
Recently, we interviewed Cewang Jigmei, President of the Tibet Academy of Social Sciences, on the efforts Tibet has made to save King Gesar.QUESTION: The 31st UNESCO Session held in Paris in October 2001 decided unani...Recently, we interviewed Cewang Jigmei, President of the Tibet Academy of Social Sciences, on the efforts Tibet has made to save King Gesar.QUESTION: The 31st UNESCO Session held in Paris in October 2001 decided unanimously to include activities to celebrate the millennium anniversary of King Gesar in the list of projects undertaken with UNESCO involvement in 2002-2003. Could you please tell me your views on this?ANSWER: This shows the international recognition of, and appreciation for, the展开更多
The present work deals with reducing greenhouse gas emissions through improving the life span of wooden power electric poles of Eucalyptus saligna. Indeed, in Sub-Saharan African countries, Cameroon in particular, mos...The present work deals with reducing greenhouse gas emissions through improving the life span of wooden power electric poles of Eucalyptus saligna. Indeed, in Sub-Saharan African countries, Cameroon in particular, most of the power line networks are made of wooden supports and according to the Cameroon energy distribution company, wooden poles represent 32% of the causes of death linked to the state of the network. The company’s 2019 annual report indicates that 40,000 wooden poles were in critical condition and should be replaced. A significant number of mechanical failures affecting these supports have been observed. For example, on the HVA/LV power line “D17 Nko- abang” in Yaoundé in Cameroon, less than three years old, 10 (ten) cases of poles falling and/or breaking, due to their mechanical loading, were observed over a period of fewer than nine months, causing an average service stoppage for more than 11 hours and affecting an average of 3280 customers. These incidents lead to questions about how the supports are dimensioned and what load capacities they are designed to support. The aim of this work is, therefore, to suggest a method of dimensioning wooden poles hence reducing green- house gas emissions due to the deforestation by reducing the number of woo- den poles at risk to be replaced on Cameroon’s electricity distribution network. And more specifically, to reduce the number of mechanical failures affecting the wooden supports observed by analyzing the current wooden supports with their loads and to make proposals for improving the actual dimensioning me- thods. From the study carried out, it appears that 449 out of 845 supports, i.e., 53% needed to be replaced or monitored because they support the nominal forces ranging from 85% to 150% of their admissible limit and proposals have been made to improve their dimensioning.展开更多
基金supported by the Pre-research Foundation of CPLA General Equipment Department
文摘Testing-effort（TE） and imperfect debugging（ID） in the reliability modeling process may further improve the fitting and prediction results of software reliability growth models（SRGMs）. For describing the S-shaped varying trend of TE increasing rate more accurately, first, two S-shaped testing-effort functions（TEFs）, i.e.,delayed S-shaped TEF（DS-TEF） and inflected S-shaped TEF（IS-TEF）, are proposed. Then these two TEFs are incorporated into various types（exponential-type, delayed S-shaped and inflected S-shaped） of non-homogeneous Poisson process（NHPP）SRGMs with two forms of ID respectively for obtaining a series of new NHPP SRGMs which consider S-shaped TEFs as well as ID. Finally these new SRGMs and several comparison NHPP SRGMs are applied into four real failure data-sets respectively for investigating the fitting and prediction power of these new SRGMs.The experimental results show that：（i） the proposed IS-TEF is more suitable and flexible for describing the consumption of TE than the previous TEFs;（ii） incorporating TEFs into the inflected S-shaped NHPP SRGM may be more effective and appropriate compared with the exponential-type and the delayed S-shaped NHPP SRGMs;（iii） the inflected S-shaped NHPP SRGM considering both IS-TEF and ID yields the most accurate fitting and prediction results than the other comparison NHPP SRGMs.
文摘Shanghai,arelatlvely developed region ofChlna In economy andeducatlon;Isstill facing the critical problem ofhuman resources scarcity and low competence oflabourers In order to become a modern metropolis,one of the Internatlonaleconomlc,nnanclal and trade centres.Statistics show thatthe city Is In need of600,000 highquahtled personnel by 2000.As Shanghai Is speeding up the adjustment ofindustrlalstructure,new and high tech Industries as well as knowledge-Intensive Industries areconstantly springing tip,and even In labourlntenslve Industries,the science andtechnology contentsbave also been Increasing,so It’s extremely urgent to trainurgently needed personnel and improve workers’competence universally.The municipal government of Shanghai thlllks highly of open education,andShanghai Education Commission（SEC）also sets It as one of＊thesion important tasks ofShanghai’s educational development. At present,SEC Is drafting the ninth nve、year plan for educational developmentandthe 2010’s target,ofwhich
文摘Bicycles are generally considered "Green Vehicles", with their cheap price and easy maintenance. China, known as the "Kingdom of Bicycles", has the largest output and export volume of whole bikes, but the industry has been in difficulties in recent years. The blind import of international capital is the main reason for the decline of the bicycle industry in the country. In the mid 1980s, cheap labor and optimistic market forecasts attracted international capital to China’s bicycle indus-
文摘The Eighth Five-year Plan period wasa fast growing period for Jiangsu’sforeign economic and technical co-operation. Guided by the policy of seizingopportunities, expanding the opening driveand promoting development, all the staff atthe provincial foreign economic front madeevery effort to fulfill the goal of the sus-tained, fast and healthy development in for-
文摘Zhejiang’s machine-building industryhas made sustained efforts to increase itsexports through the combination ofindustry and trade. In the past decade,Zhejiang’s export volume of mechanicaland electrical products has increased over 10times, becoming the leading exports fromthe province. Zhejiang has thereforebecome an important province exportingmachinery in China.
文摘The third thematic seminar of the Stories of the Communist Party of China(CPC)series focusing on party-building,with'Building a Well-disciplined Party in All Aspects:The Practice of Shanxi'as its theme,was held in Beijing on June 30.Song Tao,Minister of the International Department of the CPC Central Committee(IDCPC),Luo Huining,Secretary of the CPC Shanxi
文摘Recently, we interviewed Cewang Jigmei, President of the Tibet Academy of Social Sciences, on the efforts Tibet has made to save King Gesar.QUESTION: The 31st UNESCO Session held in Paris in October 2001 decided unanimously to include activities to celebrate the millennium anniversary of King Gesar in the list of projects undertaken with UNESCO involvement in 2002-2003. Could you please tell me your views on this?ANSWER: This shows the international recognition of, and appreciation for, the
文摘The present work deals with reducing greenhouse gas emissions through improving the life span of wooden power electric poles of Eucalyptus saligna. Indeed, in Sub-Saharan African countries, Cameroon in particular, most of the power line networks are made of wooden supports and according to the Cameroon energy distribution company, wooden poles represent 32% of the causes of death linked to the state of the network. The company’s 2019 annual report indicates that 40,000 wooden poles were in critical condition and should be replaced. A significant number of mechanical failures affecting these supports have been observed. For example, on the HVA/LV power line “D17 Nko- abang” in Yaoundé in Cameroon, less than three years old, 10 (ten) cases of poles falling and/or breaking, due to their mechanical loading, were observed over a period of fewer than nine months, causing an average service stoppage for more than 11 hours and affecting an average of 3280 customers. These incidents lead to questions about how the supports are dimensioned and what load capacities they are designed to support. The aim of this work is, therefore, to suggest a method of dimensioning wooden poles hence reducing green- house gas emissions due to the deforestation by reducing the number of woo- den poles at risk to be replaced on Cameroon’s electricity distribution network. And more specifically, to reduce the number of mechanical failures affecting the wooden supports observed by analyzing the current wooden supports with their loads and to make proposals for improving the actual dimensioning me- thods. From the study carried out, it appears that 449 out of 845 supports, i.e., 53% needed to be replaced or monitored because they support the nominal forces ranging from 85% to 150% of their admissible limit and proposals have been made to improve their dimensioning.
