The study was to investigate the effects of different thawing temperatures(5,15,40,75,90 ℃) and times(1- 120 s) on properties of post-thaw cow semen by detecting frozen-thawed semen motility,acrosome integrity and ta...The study was to investigate the effects of different thawing temperatures(5,15,40,75,90 ℃) and times(1- 120 s) on properties of post-thaw cow semen by detecting frozen-thawed semen motility,acrosome integrity and tail membrane integrity,further obtaining the optimal thawing method of straw frozen semen from dairy cow. The results showed that(1) Thawing of the straw frozen semen of dairy cow at 75 ℃ for 3 s yielded the highest semen motility,followed by 40 ℃for 20 s,and the least by low temperature 5 ℃ and room temperature 15 ℃ with a semen motility of 0. 3,moreover thawing at high temperature 90 ℃ was not suitable for large scale production due to the difficult control of the temperature;(2) The acrosome intact rate and plasma membrane integrity rate of semens thawed at90 ℃ were remarkably lower than that at 40 ℃ and 75 ℃ significantly(P 【 0. 05),while its semen malformation rate was significantly higher than that at 40 ℃and 75 ℃(P 【 0. 05);(3) The Survival time of semens at 37 ℃ varied largely among different thawing temperature,in detail by 40 ℃ 】 75 ℃ 】 90 ℃. In practice,the thawing method of straw frozen semen of dairy cow should be selected according to the specific circumstance and inseminated immediately,with the recommended condition of thawing at 75 ℃ for 3 s. If the thawed semen could not be inseminated immediately,the thawing should be performed at 20 s for 40 ℃to maintain the motility for a longer term.展开更多
The aim was to discuss the optimal storage environment and proper insemination time after thawing of 0.25 mL straw frozen semen. Straw frozen semen was thawed at 40 ℃ for 20 s, and then stored at 0 -4 ℃, 14 - 16 ℃,...The aim was to discuss the optimal storage environment and proper insemination time after thawing of 0.25 mL straw frozen semen. Straw frozen semen was thawed at 40 ℃ for 20 s, and then stored at 0 -4 ℃, 14 - 16 ℃, 25 -27 ℃ for 2, 4, 6, 8 and 10 h, respectively. The sperm motility was detected. After thawing, semen was stored at 0 - 4 ℃ and 14 - 16 ℃ for 10 h. Their sperm motilities (0.434 ±0. 016 7 and 0.423 ±0.019 6) had no significant differences (P 〉 0.05) with initial thawing motility (0.441 ± 0.030). Sperm motility reduced as the storage time prolonged at 25 -27 ℃. Sperm motility after 6 h had signifi- cant differences with that of initial thawing motility (P 〈 O. 05 ), and sperm motilities after 8 and 10 h showed extremely significant differences (P 〈 0.01 ). Thus, sperm motility after thawing was still very high after stored at 0 -4 ℃ and 14 - 16 ℃ within 10 h, which met the requirements for insemination. Under this temperature and time ranges, sperm could be carried over long distances, which had small effects on sperm quality and reached the expected insemination effects. However, under the temperature of 25 - 27 ℃, semen should be used for insemination within 6 h after thawing.展开更多
Functional gradient materials provided us a new concept for artificial articular cartilage design with gradient component and gradient structure where one side of the material is high free water content thereby provid...Functional gradient materials provided us a new concept for artificial articular cartilage design with gradient component and gradient structure where one side of the material is high free water content thereby providing excellent lubrication function and the opposite side of the material is high hydroxyapatite content, thereby improving the bioactivity of the material and stimulating cell growth. The goal of the present study was to develop a multi-layered gradient HA/PVA gel biocomposites through layer-by-layer casting method combing with freeze/thaw cycle technology. The various influence factors on the compressive strength and modulus of the multi-layered gradient biocomposites were investigated. The results showed that the compressive mechanical characteristics of the biocomposites were similar to that of natural articular cartilage. Both the compressive strength and modulus of the multi-layered gradient HA/PVA gel biocomposites increased exponentially with the rise of compressive strain ratio. Both the compressive strength and average compressive modulus of the biocomposites improved with the rise of freeze/thaw cycle times and total concentration of HA particles in the biocomposites, but they showed decreasing tendency with the rise of HA concentration difference between adjacent layers.展开更多
基金Supported by the Technical Development and Demonstration Program of Beijing Vocational College of Agriculture(XY-YF-14-20)Agricultural S&T Program from Beijing Municipal Agricultural Commission(20140146)Non-staple Food Project from Beijing Municipal Agricultural Commission(20140204-7)
文摘The study was to investigate the effects of different thawing temperatures(5,15,40,75,90 ℃) and times(1- 120 s) on properties of post-thaw cow semen by detecting frozen-thawed semen motility,acrosome integrity and tail membrane integrity,further obtaining the optimal thawing method of straw frozen semen from dairy cow. The results showed that(1) Thawing of the straw frozen semen of dairy cow at 75 ℃ for 3 s yielded the highest semen motility,followed by 40 ℃for 20 s,and the least by low temperature 5 ℃ and room temperature 15 ℃ with a semen motility of 0. 3,moreover thawing at high temperature 90 ℃ was not suitable for large scale production due to the difficult control of the temperature;(2) The acrosome intact rate and plasma membrane integrity rate of semens thawed at90 ℃ were remarkably lower than that at 40 ℃ and 75 ℃ significantly(P 【 0. 05),while its semen malformation rate was significantly higher than that at 40 ℃and 75 ℃(P 【 0. 05);(3) The Survival time of semens at 37 ℃ varied largely among different thawing temperature,in detail by 40 ℃ 】 75 ℃ 】 90 ℃. In practice,the thawing method of straw frozen semen of dairy cow should be selected according to the specific circumstance and inseminated immediately,with the recommended condition of thawing at 75 ℃ for 3 s. If the thawed semen could not be inseminated immediately,the thawing should be performed at 20 s for 40 ℃to maintain the motility for a longer term.
基金Supported by the Technology Research and Demonstrational Popularization Project of Beijing Vocational College of Agriculture(XY-YF-15-07)(XY-YF-14-21)
文摘The aim was to discuss the optimal storage environment and proper insemination time after thawing of 0.25 mL straw frozen semen. Straw frozen semen was thawed at 40 ℃ for 20 s, and then stored at 0 -4 ℃, 14 - 16 ℃, 25 -27 ℃ for 2, 4, 6, 8 and 10 h, respectively. The sperm motility was detected. After thawing, semen was stored at 0 - 4 ℃ and 14 - 16 ℃ for 10 h. Their sperm motilities (0.434 ±0. 016 7 and 0.423 ±0.019 6) had no significant differences (P 〉 0.05) with initial thawing motility (0.441 ± 0.030). Sperm motility reduced as the storage time prolonged at 25 -27 ℃. Sperm motility after 6 h had signifi- cant differences with that of initial thawing motility (P 〈 O. 05 ), and sperm motilities after 8 and 10 h showed extremely significant differences (P 〈 0.01 ). Thus, sperm motility after thawing was still very high after stored at 0 -4 ℃ and 14 - 16 ℃ within 10 h, which met the requirements for insemination. Under this temperature and time ranges, sperm could be carried over long distances, which had small effects on sperm quality and reached the expected insemination effects. However, under the temperature of 25 - 27 ℃, semen should be used for insemination within 6 h after thawing.
基金the financial support from the National Natural Science Foundation of China (No.51175004)the Natural Science Research of Key Projects of Anhui Provincial Universities(No.KJ2010A099)
文摘Functional gradient materials provided us a new concept for artificial articular cartilage design with gradient component and gradient structure where one side of the material is high free water content thereby providing excellent lubrication function and the opposite side of the material is high hydroxyapatite content, thereby improving the bioactivity of the material and stimulating cell growth. The goal of the present study was to develop a multi-layered gradient HA/PVA gel biocomposites through layer-by-layer casting method combing with freeze/thaw cycle technology. The various influence factors on the compressive strength and modulus of the multi-layered gradient biocomposites were investigated. The results showed that the compressive mechanical characteristics of the biocomposites were similar to that of natural articular cartilage. Both the compressive strength and modulus of the multi-layered gradient HA/PVA gel biocomposites increased exponentially with the rise of compressive strain ratio. Both the compressive strength and average compressive modulus of the biocomposites improved with the rise of freeze/thaw cycle times and total concentration of HA particles in the biocomposites, but they showed decreasing tendency with the rise of HA concentration difference between adjacent layers.