The application of satellite radiance assimilation can improve the simulation of precipitation by numerical weather prediction models. However, substantial quantities of satellite data, especially those derived from l...The application of satellite radiance assimilation can improve the simulation of precipitation by numerical weather prediction models. However, substantial quantities of satellite data, especially those derived from low-level（surface-sensitive）channels, are rejected for use because of the difficulty in realistically modeling land surface emissivity and energy budgets.Here, we used an improved land use and leaf area index（LAI） dataset in the WRF-3 DVAR assimilation system to explore the benefit of using improved quality of land surface information to improve rainfall simulation for the Shule River Basin in the northeastern Tibetan Plateau as a case study. The results for July 2013 show that, for low-level channels（e.g., channel 3）,the underestimation of brightness temperature in the original simulation was largely removed by more realistic land surface information. In addition, more satellite data could be utilized in the assimilation because the realistic land use and LAI data allowed more satellite radiance data to pass the deviation test and get used by the assimilation, which resulted in improved initial driving fields and better simulation in terms of temperature, relative humidity, vertical convection, and cumulative precipitation.展开更多
Ti33O55 films are deposited with the help of an electron beam evaporator for their applications in metasurfaces. The film of subwavelength （632nm） thickness is deposited on a silicon substrate and annealed at 400℃....Ti33O55 films are deposited with the help of an electron beam evaporator for their applications in metasurfaces. The film of subwavelength （632nm） thickness is deposited on a silicon substrate and annealed at 400℃. The ellipsometry result shows a high refractive index above 2.5 with the minimum absorption coefficient in the visible region, which is necessary for high efficiency of transparent metasurfaces. Atomic force microscopy analysis is employed to measure the roughness of the as-deposited films. It is seen from micrographs that the deposited films are very smooth with the minimum roughness to prevent scattering and absorption losses for metasurface devices. The absence of grains and cracks can be seen by scanning electron microscope analysis, which is favorable for electron beam lithography. Fourier transform infrared spectroscopy reveals the transmission and reflection obtained from the film deposited on glass substrates. The as-deposited film shows high transmission above 60%, which is in good agreement with metasurfaces.展开更多
A simple three-level system is proposed to produce high index of refraction with zero absorption in an Er^3＋-doped yttrium aluminium garnet （YAG） crystal, which is achieved for a probe field between the excited sta...A simple three-level system is proposed to produce high index of refraction with zero absorption in an Er^3＋-doped yttrium aluminium garnet （YAG） crystal, which is achieved for a probe field between the excited state 4I13/2 and ground state 4I15/2 by adjusting a strong coherent driving field between the upper excited state 4I11/2 and 4I15/2. It is found that the changes of the frequency of the coherent driving field and the concentration of Er^3＋ ions in the YAG crystal can maximize the index of refraction accompanied by vanishing absorption. This result could be useful for the dispersion compensation in fibre communication, laser particle acceleration, high precision magnetometry and so on.展开更多
We report the near-stoichiometric Ti：LiNbO3 strip waveguides fabricated by vapour transport equilibration （VTE） at 1060~^{／circ}C for 12 h and co-diffusion of 4--8~／mu m wide, 115-nm thick Ti-strips. Optical stud...We report the near-stoichiometric Ti：LiNbO3 strip waveguides fabricated by vapour transport equilibration （VTE） at 1060~^{／circ}C for 12 h and co-diffusion of 4--8~／mu m wide, 115-nm thick Ti-strips. Optical studies show that these waveguides are monomode at 1.5~／mu m and have losses of 1.3 and 1.1~dB/cm for the TM and TE modes, respectively. In the waveguide width/depth direction, the mode field follows a Gauss/Hermite--Gauss profile. A secondary ion mass spectrometry study reveals that the Ti profile follows a sum of two error functions along the width direction and a complementary error function in the depth direction. Micro-Raman analysis shows that the Li-composition in the depth direction also follows a complementary error function. The mean Li/Nb ratio in the waveguide layer is about 0.98. The inhomogeneous Li-composition profile results in a varied substrate index in the guiding layer, and the refractive index profile in the guiding layer is given.展开更多
基金supported by the National Key Research and Development Program of China(Grant No.2016YFA0602701)the National Natural Science Foundation of China(Grant Nos.41721091,41630754,91644225)the Open Program(Grant No.SKLCS-OP-2017-02)from the State Key Laboratory of Cryospheric Science,Northwest Institute of EcoEnvironment and Resources,Chinese Academy of Sciences
文摘The application of satellite radiance assimilation can improve the simulation of precipitation by numerical weather prediction models. However, substantial quantities of satellite data, especially those derived from low-level（surface-sensitive）channels, are rejected for use because of the difficulty in realistically modeling land surface emissivity and energy budgets.Here, we used an improved land use and leaf area index（LAI） dataset in the WRF-3 DVAR assimilation system to explore the benefit of using improved quality of land surface information to improve rainfall simulation for the Shule River Basin in the northeastern Tibetan Plateau as a case study. The results for July 2013 show that, for low-level channels（e.g., channel 3）,the underestimation of brightness temperature in the original simulation was largely removed by more realistic land surface information. In addition, more satellite data could be utilized in the assimilation because the realistic land use and LAI data allowed more satellite radiance data to pass the deviation test and get used by the assimilation, which resulted in improved initial driving fields and better simulation in terms of temperature, relative humidity, vertical convection, and cumulative precipitation.
基金Information Technology University of the Punjab, Lahore, Pakistan for financial supportthe financial support by Engineering Research Center Program(NRF-2015R1A5A1037668)+1 种基金global Ph.D. fellowship(NRF-2016H1A2A1906519)the KRF fellowship(NRF-2017H1D3A1A02011379)through the National Research Foundation of Korea (NRF) funded by the Ministry of Science, ICT and Future Planning (MSIP) of Korean government
文摘Ti33O55 films are deposited with the help of an electron beam evaporator for their applications in metasurfaces. The film of subwavelength （632nm） thickness is deposited on a silicon substrate and annealed at 400℃. The ellipsometry result shows a high refractive index above 2.5 with the minimum absorption coefficient in the visible region, which is necessary for high efficiency of transparent metasurfaces. Atomic force microscopy analysis is employed to measure the roughness of the as-deposited films. It is seen from micrographs that the deposited films are very smooth with the minimum roughness to prevent scattering and absorption losses for metasurface devices. The absence of grains and cracks can be seen by scanning electron microscope analysis, which is favorable for electron beam lithography. Fourier transform infrared spectroscopy reveals the transmission and reflection obtained from the film deposited on glass substrates. The as-deposited film shows high transmission above 60%, which is in good agreement with metasurfaces.
基金Project supported by the National Natural Science Foundation of China （Grant No 10334010）.
文摘A simple three-level system is proposed to produce high index of refraction with zero absorption in an Er^3＋-doped yttrium aluminium garnet （YAG） crystal, which is achieved for a probe field between the excited state 4I13/2 and ground state 4I15/2 by adjusting a strong coherent driving field between the upper excited state 4I11/2 and 4I15/2. It is found that the changes of the frequency of the coherent driving field and the concentration of Er^3＋ ions in the YAG crystal can maximize the index of refraction accompanied by vanishing absorption. This result could be useful for the dispersion compensation in fibre communication, laser particle acceleration, high precision magnetometry and so on.
基金supported by the National Natural Science Foundation of China (Grant Nos. 50872089 and 60577012)the Research Grants Council of the Hong Kong Special Administrative Region, China (Grant No. CityU 1194/07)
文摘We report the near-stoichiometric Ti：LiNbO3 strip waveguides fabricated by vapour transport equilibration （VTE） at 1060~^{／circ}C for 12 h and co-diffusion of 4--8~／mu m wide, 115-nm thick Ti-strips. Optical studies show that these waveguides are monomode at 1.5~／mu m and have losses of 1.3 and 1.1~dB/cm for the TM and TE modes, respectively. In the waveguide width/depth direction, the mode field follows a Gauss/Hermite--Gauss profile. A secondary ion mass spectrometry study reveals that the Ti profile follows a sum of two error functions along the width direction and a complementary error function in the depth direction. Micro-Raman analysis shows that the Li-composition in the depth direction also follows a complementary error function. The mean Li/Nb ratio in the waveguide layer is about 0.98. The inhomogeneous Li-composition profile results in a varied substrate index in the guiding layer, and the refractive index profile in the guiding layer is given.
