The Soil and Water Assessment Tool （SWAT） was implemented in a small forested watershed of the Soan River Basin innorthern Pakistan through application of the sequential uncertainty fitting （SUFI-2） method to inve...The Soil and Water Assessment Tool （SWAT） was implemented in a small forested watershed of the Soan River Basin innorthern Pakistan through application of the sequential uncertainty fitting （SUFI-2） method to investigate the associateduncertainty in runoff and sediment load estimation. The model was calibrated for a 10-year period （1991–2000） with aninitial 4-year warm-up period （1987–1990）, and was validated for the subsequent 10-year period （2001–2010）. Themodel evaluation indices R2 （the coefficient of determination）, NS （the Nash-Sutcliffe efficiency）, and PBIAS （percentbias） for stream flows simulation indicated that there was a good agreement between the measured and simulated flows.To assess the uncertainty in the model outputs, p-factor （a 95% prediction uncertainty, 95PPU） and r-factors （averagewideness width of the 95PPU band divided by the standard deviation of the observed values） were taken into account.The 95PPU band bracketed 72% of the observed data during the calibration and 67% during the validation. The r-factorwas 0.81 during the calibration and 0.68 during the validation. For monthly sediment yield, the model evaluation coefficients（R2 and NS） for the calibration were computed as 0.81 and 0.79, respectively; for validation, they were 0.78and 0.74, respectively. Meanwhile, the 95PPU covered more than 60% of the observed sediment data during calibrationand validation. Moreover, improved model prediction and parameter estimation were observed with the increasednumber of iterations. However, the model performance became worse after the fourth iterations due to an unreasonableparameter estimation. Overall results indicated the applicability of the SWAT model with moderate levels of uncertaintyduring the calibration and high levels during the validation. Thus, this calibrated SWAT model can be used for assessmentof water balance components, climate change studies, and land use management practices.展开更多
基金supported by the Centre of Excellence in Water Resources Engineering, University of Engineering and Technology Lahore, and local authorities in Pakistan
文摘The Soil and Water Assessment Tool （SWAT） was implemented in a small forested watershed of the Soan River Basin innorthern Pakistan through application of the sequential uncertainty fitting （SUFI-2） method to investigate the associateduncertainty in runoff and sediment load estimation. The model was calibrated for a 10-year period （1991–2000） with aninitial 4-year warm-up period （1987–1990）, and was validated for the subsequent 10-year period （2001–2010）. Themodel evaluation indices R2 （the coefficient of determination）, NS （the Nash-Sutcliffe efficiency）, and PBIAS （percentbias） for stream flows simulation indicated that there was a good agreement between the measured and simulated flows.To assess the uncertainty in the model outputs, p-factor （a 95% prediction uncertainty, 95PPU） and r-factors （averagewideness width of the 95PPU band divided by the standard deviation of the observed values） were taken into account.The 95PPU band bracketed 72% of the observed data during the calibration and 67% during the validation. The r-factorwas 0.81 during the calibration and 0.68 during the validation. For monthly sediment yield, the model evaluation coefficients（R2 and NS） for the calibration were computed as 0.81 and 0.79, respectively; for validation, they were 0.78and 0.74, respectively. Meanwhile, the 95PPU covered more than 60% of the observed sediment data during calibrationand validation. Moreover, improved model prediction and parameter estimation were observed with the increasednumber of iterations. However, the model performance became worse after the fourth iterations due to an unreasonableparameter estimation. Overall results indicated the applicability of the SWAT model with moderate levels of uncertaintyduring the calibration and high levels during the validation. Thus, this calibrated SWAT model can be used for assessmentof water balance components, climate change studies, and land use management practices.
