Effect of Variation of the Coefficient of Friction on the Temperature at the Level of the Fault Lips

Earth’s crust is an anisotropic and purely heterogeneous medium, which is justified by existence of different discontinuities;our study aims to show the effect of the variation of coefficient of friction on the evolution of temperature and its impact on seismic forecasting. In this work, we are model in 2D the variation of thermal energy and temperature produced by friction at the level of fault lip as function of depth of the seismic focus and at different value of time. Earthquakes are born when the energy accumulated by friction at the level of fault is suddenly released causing damage, sometimes noticeable on the surface of earth (macroseisms), and sometimes not at all noticeable on the surface of earth (microseisms), then energy which occurs before is important to forecasting earthquake. Assuming that coefficient of friction is variable, our results have enabled us to highlight the fact that, the greater the coefficient of friction, more the temperature increases, although the temperature profile increase over time but not linearly reflecting the presence of different asperities and discontinuities zone;slip generated at the level of fault occur a variation of temperature on specific points called roughness in common agreement with the literature. A large part of energy produced by friction is dissipated in heat causing a local increases in temperature which a very short duration and called flash contact temperature, and that despite the fact that the temperature evolved in time and space, it all converged towards a perfectly distinguishable fixed point.

Correlation Study of Operational Data and System Performance of District Cooling System with Ice Storage

The district cooling system (DCS) with ice storage can reduce the peak electricity demand of the business district buildings it serves, improve system efficiency, and lower operational costs. This study utilizes a monitoring and control platform for DCS with ice storage to analyze historical parameter values related to system operation and executed operations. We assess the distribution of cooling loads among various devices within the DCS, identify operational characteristics of the system through correlation analysis and principal component analysis (PCA), and subsequently determine key parameters affecting changes in cooling loads. Accurate forecasting of cooling loads is crucial for determining optimal control strategies. The research process can be summarized briefly as follows: data preprocessing, parameter analysis, parameter selection, and validation of load forecasting performance. The study reveals that while individual devices in the system perform well, there is considerable room for improving overall system efficiency. Six principal components have been identified as input parameters for the cold load forecasting model, with each of these components having eigenvalues greater than 1 and contributing to an accumulated variance of 87.26%, and during the dimensionality reduction process, we obtained a confidence ellipse with a 95% confidence interval. Regarding cooling load forecasting, the Relative Absolute Error (RAE) value of the light gradient boosting machine (lightGBM) algorithm is 3.62%, Relative Root Mean Square Error (RRMSE) is 42.75%, and R-squared value (R2) is 92.96%, indicating superior forecasting performance compared to other commonly used cooling load forecasting algorithms. This research provides valuable insights and auxiliary guidance for data analysis and optimizing operations in practical engineering applications. .

A preliminary study of the variation of phytoplankton absorption coefficients in the northern South China Sea

The temporal and spatial variabilities of phytoplankton absorption coefficients （a ph （λ）） and their relationships with physical processes in the northern South China Sea were examined, based on in situ data collected from two cruise surveys during May 14 to 25, 2001 and November 2 to 21, 2002. Significant changes in the surface water in a ph values and B/R ratios （a ph （440）/a ph （675）） were observed in May, which were caused by a phytoplankton bloom on the inner shelf stimulated by a large river plume due to heavy precipitation. This is consistent with the observed one order of magnitude elevation of chlorophyll a and a shift from a pico/nano dominated phytoplankton community to one dominated by micro-algae. Enhanced vertical mixing due to strengthened northeast monsoon in November has been observed to result in higher surface a ph （675） （0.002–0.006 m-1 higher） and less pronounced subsurface maximum on the outer shelf/slope in November as compared with that in May. Measurements of a ph and B/R ratios from three transects in November revealed a highest surface a ph （675） immediately outside the mouth of the Zhujiang （Pearl） River Estuary, whereas lower a ph （675） and higher B/R ratios were featured in the outer shelf/slope waters, demonstrating the respective influence of the Zhujiang River plume and the oligotrophic water of the South China Sea. The difference in spectral shapes of phytoplankton absorption （measured by B/R ratios and bathochromic shifts） on these three transects infers that picoprocaryotes are the major component of the phytoplankton community on the outer shelf/slope rather than on the inner shelf. A regional tuning of the phytoplankton absorption spectral model （Carder et al., 1999） was attempted, demonstrating a greater spatial variation than temporal variation in the lead parameter a 0 （λ）. It was thus implicated that region-based parameterization of ocean color remote sensing algorithms in the northern South China Sea was mandatory.

Analysis on the Variation Characteristics of Sunshine Hours in Puyang City

[Objective] The research aimed to analyze the variation characteristics of sunshine hours in Puyang City in recent 51 years.[Method] Based on the monthly sunshine hours in five meteorological stations of Puyang City during 1960-2010,the annual,seasonal and monthly variation trends of sunshine hours,mutation time node were analyzed by using the climate trend coefficient,climate tendency rate,sliding average method,SNR and so on.The objective fact and rule of sunshine variation in Puyang in recent 51 years were revealed.[Result] The annual sunshine hours presented the decline trend in Puyang City in recent 51 years,and the decline range was-14.30 h/a.The seasonal sunshine hours presented the decline trend over the years,and the decline range was during-0.66 and-1.89 h/a.The maximum decline range was-1.89 h/a in summer.The monthly sunshine hours presented the decline trend over the years,and the decline range was during-21.51 and-2.13 h/a.The maximum decline range was-21.51 h/a in July.The annual sunshine hours had one mutation in 1983.The sunshine hours was more in the 1960s and 1970s.In the middle and late periods of 1980s,the sunshine hours was relatively less.[Conclusion] The research provided the guidance value for the adjustment of plantation structure and the transformation of agricultural developed manner in Puyang City.

New SST correction method from multi-satellite based on the coefficient of variation

In remote sensing sea surface temperature （SST）, the traditional fusion method is used to compute the dot product of a subjective weight vector with a satellite measurement vector, while the result requires validation by field measurement. However, field measurement that relative to the satellite measurement is very sparse, many information may not be verified. A relative objective weight vector is constructed by using the limited field measurement, which is based on coefficient of variation method. And then it make an application of the data fusion by the weighted average method in the SST data. fuse SST data with the weighted average method. In this way, some posteriori information can be added to the fusion process. The model reduces the dependence on verification, and some of the satellite measurement can be handled without corresponding to the field measurement, and the fusion result matches transfer errors theory.

Study on the Driving Forces of Rocky Desertification in Guizhou Province Based on Variation Coefficient Method

[Objective] The aim was to study the driving forces of rocky desertification in Guizhou Province. [Method] Based on GIS and RS technology, the main driving forces of rocky desertification in Guizhou Province were analyzed by means of correlation analysis and variation coefficient method, and then the distribution of rocky desertification in Guizhou Province was assessed synthetically. [Result] The main driving forces of rocky desertification in Guizhou Province were vegetation cover, rainfall, peasant income and gradient which were obviously correlative with rocky desertification; from theoretical distribution, rocky desertification was the most serious in Bijie, southwest Guizhou, southern Guizhou and northeastern Guizhou, and the theoretical distribution of rocky desertification in Bijie was severer than its current situation, which showed that construction of ecological function area in Bijie restrained the development of rocky desertification effectively; the good consistency between theoretical and current distribution of rocky desertification revealed that the study method was feasible. [Conclusion] The study could provide theoretical references for the practical control of rocky desertification.

Grading Standards of the Coefficient of Variation in the Electronic Raw Silk Size Testing

In order to shorten the difference between the raw silk size grading standards of the world and that of China, to quicken the step of the electronic raw silk testing process, the distribution of the coefficient of variation (CV50m%) of the raw silk size in the electronic testing and the development of the new standards are studied according to the sampling and grading theory. By the theoretical deduction and the simulating experiments, the distribution of the coefficient of variation of the raw silk size is given, and the grading scheme whose quality index is the coefficient of variation(CV50m%)of the raw silk size and the grading precisions of all grades are proposed. Moreover, the rightness and the feasibility of the grading scheme are testified by the sampling and grading simulation.

Predicting GM(1,N) Model for the Coefficient of Variation of Hectometer Yarn's Weight

The Coefficient of Variation(CV)of hectometer yarn's weight is one of the guidelines to evaluate its intrinsic quality.In the spinning manufacturing,the control of cotton yarn's weight unevenness is accomplished mainly in terms of a spot-check on semi-product and a succedent adjust in process parameters during spinning based on technicians' experience.However,it is theoretically believed among manufacturers that with fixed technical levels and parameters in the spinning process,the quality parameters of assorted cotton have a certain influence on the CV.In order to find out a rule of the influence that assorted cotton has on the CV,a GM(1,N)model,correlated raw cotton's quality parameter with the CV,has firstly been developed according to the modeling theory of grey system,and then been applied in the designing step to predict the CV.It has been approved by practical modeling and validation that the model could fit preferably an accrual CV value,and provide a method of quantitative predicting analysis for textile manufacturers to design cotton yarn's quality.

The coefficient of variation representing the non-uniformity of the strain field and its implication to detect earthquake precursor

Before the major earthquake or rock damage occurs,it is often accompanied by a sudden change in the degree of non-uniformity of the strain field.In order to find a stronger non-uniformity signal before the rock failure,the coefficient of variation(Cv)is examined and reformed in this study.We test the Cv calculation way of the"normal-abnormal"model proposed in the previous studies.Based on the analysis of the physical process of rock failure and its relationship to the shear strain field,we construct a new way to calculate the Cv value.The variation of shear strain field on rock sample with the increase of stress is obtained by the digital speckle correlation method(DSCM).The new Cv value calculation way is used to study the non-uniformity of the spatial distribution for the shear strain field.The results show that this Cv calculation way can get more obvious abnormal signals.When the number of observation points are limited,the specific distribution of points can increase the signal strength,which may provide reference for the research on precursor detection of earthquakes.

Application of Equality Test of Coefficients of Variation to the Heteroskedasticity Test

The presence of heteroskedasticity in a considered regression model may bias the standard deviations of parameters obtained by the Ordinary Least Square (OLS) method. In this case, several hypothesis tests on the model under consideration may be biased, for example, CHOW’s coefficient stability test (or structural change test), Student’s t-test and Fisher’s F-test. Most of the heteroscedasticity tests in the literature are based on the comparison of variances. Despite the multiplication of equality tests of coefficients of variation (CVs) that have appeared in the literature, to our knowledge, the first and only use of the coefficient of variation in the detection of heteroskedasticity was offered by Li and Yao in 2017. Thus, this paper offers an approach to determine the existence of heteroskedasticity by a test of equality of coefficients of variation. We verify by a Monte Carlo robustness and performance test that our method seems even better than some tests in the literature. The results of this study contribute to the exploitation of the statistical measurement of CV dispersion. They help technicians economists to better verify their hypotheses before making a scientific decision when making a necessary forecast, in order to contribute effectively to the economic and sustainable development of a company or enterprise.

CLASSICAL LIMITS FOR THE COEFFICIENT OF VARIATION FOR THE NORMAL DISTRIBUTION

The exact classical limits for the coefficient of variation c for the normal distribution are derived. The hand-calculating approximated classical limits for c having high accuracy are given to meet practical engineering needs. Using Odeh and Owen's computational method and Brent's algorithm, the tables for the r-upper exact classical limits of coefficient of variation for normal distribution are calculated for the different confidence coefficient y, the sample size n=1(1)30,40,60,120, the sample coefficient of variation c=0.01(0.01)0.20. It is shown that if n<8,c<0.20, then the V -upper exact classical limits cu for c are slightly higher than the exact fiducial limits cu,F for c if. n>8, c<0.02,then cu-cu,f<5x10-6

基于PROMETHEE-Ⅱ的电网科技项目后评估评价方法研究

为满足双碳背景下电网精准投资的迫切需求,面对目前电网科技项目数量的急剧增加,迫切需要构建一个后评价指标体系,以低碳绿色发展、运营效率和经济效益为特点,以便评估电网发展规模和速度、结构和安全性以及效率和效益,进而带动科技项目成果转化率的提高,加快科研项目向市场的推广进程。从组织管理、技术水平、成果应用以及影响力4个方面构建电网科技项目后评估的评价指标体系,应用三角模糊数和变异系数法结合的组合赋权法确定各评价指标的权重,基于PROMETHEE-Ⅱ方法对电网科技项目进行后评估,确定最终的评价结果。以实际案例分析,验证该模型具有可行性。

Improving seismic interpretation: a high-contrast approximation to the reflection coefficient of a plane longitudinal wave

Linearized approximations of reflection and transmission coefficients set a foundation for amplitude versus offset（AVO） analysis and inversion in exploration geophysics.However,the weak properties contrast hypothesis of those linearized approximate equations leads to big errors when the two media across the interface vary dramatically.To extend the application of AVO analysis and inversion to high contrast between the properties of the two layers,we derive a novel nonlinearized high-contrast approximation of the PP-wave reflection coefficient,which establishes the direct relationship between PPwave reflection coefficient and P-wave velocities,S-wave velocities and densities across the interface.（A PP wave is a reflected compressional wave from an incident compressional wave（P-wave）.） This novel approximation is derived from the exact reflection coefficient equation with Taylor expansion for the incident angle.Model tests demonstrate that,compared with the reflection coefficients of the linearized approximations,the reflection coefficients of the novel nonlinearized approximate equation agree with those of the exact PP equation better for a high contrast interface with a moderate incident angle.Furthermore,we introduce a nonlinear direct inversion method utilizing the novel reflection coefficient equation as forward solver,to implement the direct inversion for the six parameters including P-wave velocities,S-wave velocities,and densities in the upper and lower layers across the interface.This nonlinear inversion algorithm is able to estimate the inverse of the nonlinear function in terms of model parameters directly rather than in a conventional optimization way.Three examples verified the feasibility and suitability of this novel approximation for a high contrast interface,and we still could estimate the six parameters across the interface reasonably when the parameters in both media across the interface vary about 50%.

A new approach for selecting best development face ventilation mode based on G1-coefficient of variation method

The current popular methods for decision making and project optimisation in mine ventilation contain a number of deficiencies as they are solely based on either subjective knowledge or objective information.This paper presents a new approach to rank the alternatives by G1-coefficient of variation method.The focus of this approach is the use of the combination weighing,which is able to compensate for the deficiencies in the method of evaluation index single weighing.In the case study,an appropriate evaluation index system was established to determine the evaluation value of each ventilation mode.Then the proposed approach was used to select the best development face ventilation mode.The result shows that the proposed approach is able to rank the alternative development face ventilation mode reasonably,the combination weighing method had the advantages of both subjective and objective weighing methods in that it took into consideration of both the experience and wisdom of experts,and the new changes in objective conditions.This approach provides a more reasonable and reliable procedure to analyse and evaluate different ventilation modes.

Degree of style coiling is associated with corolla-tube length in the nectarless flowers of Roscoea schneideriana

The plant-pollinator‘arms race’model posits that a major driver of the evolution of elongated corollas in flowers is reciprocal selection for‘morphological fit’between pollinator-tongue length and access distance to nectar(usually corolla-tube length).Evidence for the pollinator-mediated selection on tube length and evolution of multiple,correlated floral traits remains inconclusive.To gain possible insights into the strength of stabilizing selection by assessing standing phenotypic variation,we measured a series of functionally important floral traits,including corolla tube length and‘effective’tube depth and degree of style coiling.We then calculated coefficients of variation(CV)for these traits in three field populations of R.schneideriana.Unlike in most long-tubed flowers,the bottom part of the corolla tube is completely occupied by the style,with no room for nectar.The length of this portion of the corolla tube was more variable(higher CV)than the upper part of the corolla tube,suggesting that functional tube depth was under stronger stabilizing selection.The degree of style coiling was negatively related to the corolla-tube length in all three populations of R.schneideriana,suggesting that there may be conflicting selection acting on style length and corolla-tube length,which are otherwise usually tightly correlated.Given the lack of nectar in the flowers of this species,the long corolla tubes and long styles may represent morphological holdovers from ancestors that were pollinated by long-tongued pollinators,as is still seen in related species in the western Himalayas.

Genetic variation of wood tracheid traits and their relationships with growth and wood density in clones of Pinus tabuliformis

To improve wood quality for pulpwood industries, it is important to examine not only wood density but also its components, especially tracheid characteristics. We studied genetic variations in the following tracheid traits by earlywood （EW） and latewood （LW）： tracheid length （TL）, double wall thickness （WT）, radial lumen diameter （R_D1）, tangential lumen diameter （T_D1）, radial central diameter （R_D2）, and tangential central diameter （T_D2）. We also studied the relationship with the following growth traits： diameter at breast height （DBH）, height （H）, crown breadth south-north axis （NSC）, crown breadth east-west axis （EWC）, ring width （RW）, latewood percentage （LWP）, and wood density （WD）. All sample materials were collected from a 33-year old clonal seed orchard of Pinus tabuliformis Carr. Genetic variation among clones was moderate for all tracheid traits, 9.49-26.03%. Clones significantly affected WT, R_D1, R_D2, T_D1, T_D2, and the two ratios WT/R_D1 and TL/T_D2 in EW but had no effects in LW. Clones significantly affected TL in LW but had no effects in EW. H2/C was higher in LW （0.50） than in EW （0.20） for TL, while H 2/C was higher in EW （0.27-0.46） for other tracheid traits and the two ratios （TL/T_D2 and WT/R_D1） than in EW （0.06-0.22）. WD and TL were significantly positively correlated, but WT and TL were negatively correlated both at individual and clone levels; all tracheid diameters and the four ratio values （EW_WT/ R_D1, LW WT/R_D1, EW_TL/T_D2 and LW_TL/ T_D2）, were strongly positively correlated with DBH, H, NSC, WEC and RW, and strongly negatively correlated with WD both at individual and clone levels. The most important variables for predicting WD were LW_TL, EW_WT and R_D1 in both EW and LW （r2= 0.22）. Selecting the top 10% of the clones by DBH would improve DBH growth by 12.19% （wood density was reduced by 0.14%） and produced similar responses between EW and LW for all tracheid traits： a reduction of 0.94 and 3.69% in tracheid length and increases in tracheid diameters （from 0.36 to 5.24%） and double wall thickness （0.07 and 0.87%）. The two ratios WT/R_D1 and TL/T_D2 across tissues （EW and LW） declined 0.59 and 4.56%, respectively. The decreased tracheid length and the ratio between tracheid length and diameter is disadvantageous for pulp production. The unfavorable relationship of tracheid traits with wood density indicate that multiple trait selection using optimal economic weights and optimal breeding strategies are recommended for the current longterm breeding program for P. tabuliformis.

Terrain Rendering LOD Algorithm Based on Improved Restrictive Quadtree Segmentation and Variation Coefficient of Elevation

Aiming to deal with the difficult issues of terrain data model simplification and crack disposal,the paper proposed an improved level of detail(LOD)terrain rendering algorithm,in which a variation coefficient of elevation is introduced to express the undulation of topography.Then the coefficient is used to construct a node evaluation function in the terrain data model simplification step.Furthermore,an edge reduction strategy is combined with the improved restrictive quadtree segmentation to handle the crack problem.The experiment results demonstrated that the proposed method can reduce the amount of rendering triangles and enhance the rendering speed on the premise of ensuring the rendering effect compared with a traditional LOD algorithm.

Modelling spatial variation in the treatment costs of nonpoint source pollution in mountainous regions of southwest China

Non-point source(NPS) pollution is considered to be one of the main threats of the aquatic environment. Mountainous regions are particularly important water sources for urban areas. The various driving factors of NPS pollution such as terrain, precipitation, and vegetation type in mountainous regions show clear spatial heterogeneity. Consequently, the management systems required for NPS pollution in mountainous regions are complex. In this study, we developed a framework to estimate and map the treatment costs for NPS pollution in mountainous regions and applied this method in Baoxing County, a typical mountainous county in Sichuan Province of southwest China. The export levels of total nitrogen(TN) and total phosphorus(TP) in Baoxing County were estimated using the water purification model in InVEST(Itegrated Valuation of Ecosystem Services and Tradeoffs) tool. NPS pollutant treatment costs were calculated based on the level of pollutants exports, water yield, water quality targets, and treatment costs of NPS pollutants per unit mass. The results show that at the watershed level the amounts of TN and TP exported in Baoxing County were below threshold limits. However, at the sub-watershed level, TN and TP excesses of 291.64 and 2.96 tons per year were found, respectively, with mean TN and TP treatment costs of 6.58 US$/hm^2 and 0.35 US$/hm^2. Appraising pollution treatment cost intuitively reflects the overall expenditure in NPS pollution reduction from an economic perspective. This study provides a foundation for the implementation of Payment for Ecosystem Service(PES) and the prevention and control of NPS pollution.

Multi-dimensional size effects and representative elements for nonpersistent fractured rock masses: A perspective of geometric parameter distribution

This study takes a fractured rock mass in the Datengxia Hydropower Station,China as an example to analyze the size effects and determine the representative elementary sizes.A novel method considering geometric parameter distributions is proposed in this work.The proposed method can quickly and simply determine the size effects and representative elementary sizes.Specifically,geometric parameter distributions,including fracture frequency,size and orientation,are generated on the basis of the Bernoulli trial and Monte Carlo simulation.The distributions are assessed using the coefficient of variation(CV),and the acceptable variations for CV(5%,10%and 20%)are used to determine representative elementary sizes.Generally,the representative element of rock masses is the representative elementary volume(REV).The present study extends the representative element to other dimensions,i.e.representative elementary length(REL)and representative elementary area(REA)for one and two dimensions,respectively.REL and REA are useful in studying the size effects of one-(1D)and twodimensional(2D)characteristics of rock masses.The relationships among multi-dimensional representative elementary sizes are established.The representative elementary sizes reduce with the increase in the dimensions,and REA and REV can be deduced by REL.Therefore,the proposed method can quickly and simply determine REL and further estimate REA and REV,which considerably improves the efficiency of rock mass analysis.

Research on the Application of Time Structure Variation Analysis to the Jiashi-Bachu Earthquake Swarm Sequence

In 1997 - 2003, 27 earthquakes with M≥ 5.0 occurred in the Jiashi-Bachu area of Xinjiang. It was a rare strong earthquake swarm activity. The earthquake swarm has three time segments of activity with different magnitudes in the years 1997, 1998 and 2003. In different time segments, the seismic activity showed strengthenin-qguiet changes in various degrees before earthquakes with M ≥ 5.0. In order to delimitate effectively the precursory meaning of the clustering （strengthening） quiet change in sequence and to seek the time criterion for impending prediction, the nonlinear characteristics of seismic activity have been used to analyze the time structure characteristics of the earthquake swarm sequence, and further to forecast the development tendency of earthquake sequences in the future. Using the sequence catalogue recorded by the Kashi Station, and taking the earthquakes with Ms≥ 5.0 in the sequence as the starting point and the next earthquake with Ms = 5.0 as the end, statistical analysis has been performed on the time structure relations of the earthquake sequence in different stages. The main results are as follows： （1） Before the major earthquakes with M ≥ 5.0 in the swarm sequence, the time variation coefficient （δ-value） has abnormal demonstrations to different degrees. （2） Within 10 days after δ= 1, occurrence of earthquakes with M ≥ 5.0 in the swarm is very possible. （3） The time variation coefficient has three types of change. （4） The change process before earthquakes with M5.0 is similar to that before earthquakes with M6.0, with little difference in the threshold value. In the earthquake swarm sequence, it is difficult to delimitate accurately the attribute of the current sequences （foreshock or aftershock sequence） and to judge the magnitude of the follow-up earthquake by δ-value. We can only make the judgment that earthquakes with M5.0 are likely to occur in the sequence. （5） The critical clustering characteristics of the sequence are hierarchical. Only corresponding to a certain magnitude can the sequence have the variation state of critical clustering. （6） The coefficient of the time variation has a clear meaning in physics. After the clustering-quiet state of earthquake activity has appeared, it can describe clearly the randomness of the seismogenic system. Furthermore, it can efficiently clarify whether or not the clustering quiescence variation is of some prognostic meaning. In the case that the earthquake frequency attenuation is essentially normal （h 〉 1 ） and there is no remarkable clustering-quiescence state, it is still possible to discover the abnormal change of the sequence from the time variation coefficient. On the contrary, in the later period of swarm activity, after the appearance of many seismic quiescence phenomena, this coefficient did not appear abnormally, even when h 〈 1, suggesting that the δ-value diagnosis is more universal.