Dynamic Characteristics of Transmission System for the Internal Grinder

The dynamics model of the transmission system of the internal grinder is established on the bases of Riccati transfer matrix. The dynamic characteristics of the internal grinder are obtained by analyzing the relationship between dynamic modal flexibility and modal flexibility, which is used to find out the dangerous model of the transmission system and its weak areas. Then design parameters of weak areas are modified, the new one from the old structure is put forward, and the dynamic characteristics of new ...

Dynamic physical characteristics of DC arc on arcing horn for HVDC grounding electrode line

The dynamic physical characteristics of a DC arc on an arcing horn for a high voltage direct current(HVDC)grounding electrode line are significantly different from those of the switching device arc,secondary arc,AC fault arc and pantograph-catenary arc.In this work,an experimental platform for the DC arc on the arcing horn was built,and mechanisms of the arc column short circuit and arc root movement were studied.This work further analyzes the characteristics and mechanisms of the arc motion when wind speed and direction,magnetic field and the expansion angle of the electrode are varied.Arc root movement is more likely to occur at the upper electrode.There is a competitive relationship between arc expansion and the transferring effect.The effect of wind on the arc column is greater than the effect on the arc root.The magnetic field has a significant driving effect on both the arc column and the arc root.The research results provide a comprehensive experimental basis for forther probing the method of DC arc suppression,and the improvement of the arcing horn.

One modified method of characteristics used to analyze the multiconductor transmission lines

To solve the coupling effect of multiconductor transmission lines excited by external electromagnetic wave, the modified method of characteristics is proposed. The modified method of characteristics which can compute the terminal induced voltages excited by the external electromagnetic wave when the terminal networks or intereonnection networks contain the dynamic elements is introduced. The simulation results indicate that the modified method can analyze the terminal induced voltages when the terminal networks or the interconnection networks contain the dynamic elements excited by the external electromagnetic wave. And the results are compared with the results acquired by FDTD method, the two results are completely same. So one effective modified method is implemented to compute the transmission lines.

ANALYSIS OF DYNAMIC CHARACTERISTICS FOR RCG LINES USING THEORY OF LADDER NETWORKS

The theory of RC uniform ladder networks based upon the recurrence of voltage and cur-rent functions is extended as a vehicle to analyse the dynamic characteristics of reg lines. Meth-ods for computing the time constants and simplifying the transfer functions for reg lines are alsopresented.

Optimized analysis of sharpening characteristics of a compact RF pulse source based on a gyro-magnetic nonlinear transmission line for ultrawideband electromagnetic pulse application

We constructed a compact high-power RF pulse generator based on a gyro-magnetic nonlinear transmission line(GNLTL) to produce a high-voltage pulse with a sub-nanosecond rise time and a relatively high repetition rate, which shows great potential for application in the high-power ultrawideband electromagnetic effect, etc. The influence of incident pulse parameters(rise time and voltage amplitude) and line length on the sharpening characteristics of the GNLTL were investigated experimentally to optimize the rising rate of the modulated pulse front. Based on the GNLTL equivalent circuit model consisting of an LC ladder network, the rise time, the voltage conversion coefficient and the rising rate properties of a modulated pulse were also numerically analyzed in a wider range. The results show that a?>?90 k V RF pulse with a rise time of 350 ps and a repetition rate of 1 kHz in burst mode is produced by the GNLTL at an axial biasing magnetic field of 22 kA m^-1 and a line length of 30 cm under the condition of a 70 kV incident pulse. Applying a faster and higher incident pulse is conducive to improving the sharpening effect of the GNLTL. Furthermore, within a certain range, increasing the line length of the GNLTL not only reduces the rise time, but increases the voltage conversion coefficient and the rising rate of a modulated pulse. Furthermore, considering the energy loss of ferrite rings, there is an optimal line length to obtain the fastest rising rate of a modulated pulse front edge.

The changing process and trend of ground temperature around tower foundations of Qinghai-Tibet Power Transmission line

After the construction of Qinghai-Tibet Highway and Railway, the Qinghai-Tibet Power Transmission(QTPT) line is another major permafrost engineering project with new types of engineering structures. The changing process and trend of ground temperature around tower foundations are crucial for the stability of QTPT. We analyzed the change characteristics and tendencies of the ground temperature based on field monitoring data from 2010 to 2014. The results reveal that soil around the tower foundations froze and connected with the artificial permafrost induced during the construction of footings after the first freezing period, and the soil below the original permafrost table kept freezing in subsequent thawing periods. The ground temperature lowered to that of natural fields, fast or slowly for tower foundations with thermosyphons,while for tower foundations without thermosyphons, the increase in ground temperature resulted in higher temperature than that of natural fields. Also, the permafrost temperature and ice content are significant factors that influence the ground temperature around tower foundations. Specifically, the ground temperature around tower foundations in warm and ice-rich permafrost regions decreased slowly, while that in cold and ice poor permafrost regions cooled faster. Moreover, foundations types impacted the ground temperature, which consisted of different technical processes during construction and variant of tower footing structures. The revealed changing process and trend of the ground temperature is beneficial for evaluating the thermal regime evolution around tower foundations in the context of climate change.

Impacts of flexible obstructive working environment on dynamic performances of inspection robot for power transmission line

The rigid-flexible coupling dynamic modeling and simulation of an inspection robot were conducted to study the influences of the flexible obstructive working environment i.e. overhead transmission line on the robot＇s dynamic performance. First, considering the structure of the obstacles and symmetrical mechanism of the robot prototype, four basic subactions were abstracted to fulfill full-path kinematic tasks. Then, a multi-rigid-body dynamic model of the robot was built with Lagrange equation, whil^e a multi-flexible-body dynamic model of a span of lin~ was obtained by combining finite element method （FEM）, modal synthesis method and Lagrange equation. The two subsystem models were coupled under rolling along no-obstacle segment and overcoming obstacle poses, and these simulations of three subactions along different spans of line were performed in ADMAS. The simulation results, including the coupling vibration parameters and driving moment of joint motors, show the dynamic performances of the robot along ftexibile obstructive working path： in flexible obstructive working environment, the robot can fulfill the preset motion goals; it responses slower in more flexible path; the fluctuation of robot as well as driving moment of the corresponding joint in startup and brake region is greater than that in rigid environment; the fluctuation amplitude increases with increasing working environment flexibility.

Critical Length Criterion and the Arc Chain Model for Calculating the Arcing Time of the Secondary Arc Related to AC Transmission Lines

The prompt extinction of the secondary arc is critical to the single-phase reclosing of AC transmission lines, including half-wavelength power transmission lines. In this paper, a low- voltage physical experimental platform was established and the motion process of the secondary arc was recorded by a high-speed camera. It was found that the arcing time of the secondary arc rendered a close relationship with its arc length. Through the input and output power energy analysis of the secondary arc, a new critical length criterion for the arcing time was proposed. The arc chain model was then adopted to calculate the arcing time with both the traditional and the proposed critical length criteria, and the simulation results were compared with the experimental data. The study showed that the arcing time calculated from the new critical length criterion gave more accurate results, which can provide a reliable criterion in term of arcing time for modeling and simulation of the secondary arc related with power transmission lines.

Dynamic Analysis of Overhead Transmission Lines under Turbulent Wind Loading

Transmission tower-line systems are designed using static loads specified in various codes. This paper compares the dynamic response of a test transmission line with the response due to static loads given by Eurocode. Finite element design software SAP2000 was used to model the towers and lines. Non-linear dynamic analysis including the large displacement effects was carried out. Macroscopic aspects of wind coherence along element length and integration time step were investigated. An approach is presented to compare the probabilistic dynamic response due to 7 different stochastically simulated wind fields with the response according to EN-50341. The developed model will be used to study the response recorded on a test line due to the actual wind speed time history recorded. It was found that static load from EN overestimated the strength of conductor cables. The response of coupled system considering towers and cables was found to be different from response of only cables with fixed supports.

Dynamic Engaging Characteristics of Wet Clutch in Automatic Transmission

Wet clutch is an important shifting component in automatic transmission,and its properties will affect the gear shift performance. By comparing the calculated and test results,the static friction torque model was proved to be capable of describing the real pressure and torque only in the situation of high-energy engagement.Therefore,a dynamic torque model was proposed on basis of hydrodynamic properties between friction surfaces, in which the clutch engagement was divided into three phases for hydrodynamic lubrication, mixed lubrication, and mechanical contact. The proposed dynamic torque model was validated by comparing the calculated and test results. The effects of temperature,pressure,and pressure changing rate of automatic transmission fluid( ATF) on the clutch torque were analyzed. Based on these results,the clutchto-clutch torque control during shifting in automatic transmission was optimized,and as a result,the shifting comfort was significantly improved since the problems such as the fluctuation and sudden drop of the engine rotating speed during shifting were eliminated.

Modeling Methods for the Main Switch of High Pulsed-Power Facilities Based on Transmission Line Code

Based on the transmission line code （TLCODE）, a circuit model is developed here for analyses of main switches in the high pulsed-power facilities. With the structure of the ZR main switch as an example, a circuit model topology of the switch is proposed, and in particular, calculation methods of the dynamic inductance and resistance of the switching arc are described. Moreover, a set of closed equations used for calculations of various node voltages are theoretically derived and numericMly discretized. Based on these discrete equations and the Matlab program, a simulation procedure is established for analyses of the ZR main switch. Voltages and currents at different key points are obtained, and comparisons are made with those of a PSpice L-C model. The comparison results show that these two models are perfectly in accord with each other with discrepancy less than 0.1%, which verifies the effectiveness of the TLCODE model to a certain extent.

Analysis of the Relationship Between the Meshing Stiffness and the Inherent Characteristics of Planetary Gear Transmission Mechanism

According to the relationship between the meshing stiffness and the inherent characteristics of a seven-speed three-row coupled planetary transmission mechanism,a equivalent concentrated mass dynamics model of the planetary transmission mechanism is established.The natural frequency of the planetary gear train at a specific gear is calculated and extracted.The relationship between the meshing stiffness of each row and the natural frequency of the system is analyzed,thereby avoiding possible resonance behavior by changing the meshing stiffness.These results show that the meshing stiffness,in its range of possible values,has nearly no effect on the low order natural frequency(<4.000.Hz),and that the time-varying meshing stiffness mainly affects the natural frequencies of the higher-and middle-order parts of the system.Changes of the natural frequencies lead to the change of the system's corresponding vibration mode,which will change the vibration situation of the system.

Dynamic Responses of Long-Span Transmission Tower-Line System Subjected to Broken Wires

A macroscopic finite element modeling approach was proposed to calculate the vibration of a tower-line system subjected to broken wires with software ANSYS/LS-DYNA. In the finite element model, not only the nonlinearity of wires and suspension insulators are considered, but also the support towers are included. The incremental and iterative approaches are combined by applying the unbalanced loads incrementally during each iteration cycle. The approach was illustrated with an example of a Hanjiang- River long-span transmission line system subjected to a shield wire and a conductor failure, respectively. The analysis results showed that the proposed dynamic simulation approach can demonstrate the kinetic process of the tower-line system subjected to wire ruptures： The frequencies of line components were lower and densely distributed, but the frequencies of tower components were higher and sparsely distributed. Anyhow, the dynamic effects of wire ruptures on tower-line system could not be ignored in analysis of tower-line system subjected wire failures.

Design and Analysis of the Gemini Chain System in Dual Clutch Transmission of Automobile

Chain drive system is widely used in the conditions of high-speed, overload, variable speed and load, Many studies are focused on the meshing theory and wear characteristics of chain drive system, but system design, analysis, and noise characteristics of the chain drive system are weak. System design and noise characteristic are studied for a new type Gemini chain of dual-clutch automatic transmission. Based on the meshing theory of silent chain, the design parameters of the Gemini chain system are calculated and the mathematical models and dynamic analysis models of the Gemini chain system are established. Dynamic characteristics of the Gemini chain system is simulated and the contact force of plate and pin, plate and sprockets, the chain tension forces, the transmission error and the stress of plates and pins are analyzed. According to the simulation results of the Gemini chain system, the noise experiment about system is carried out. The noise values are tested at different speed and load and spectral characteristics are analyzed. The results of simulation and experimental show that the contact forces of plate and pin, plate and sprockets are smaller than the allowable stress values, the chain tension force is less than ultimate tension and transmission error is limited in 1.2%. The noise values can meet the requirements of industrial design, and it is proved that the design and analysis method of the Gemini chain system is scientific and feasible. The design and test system is built from analysis to test of Gemini chain system. This research presented will provide a corresponding theoretical guidance for the design and dynamic characteristics and noise characteristics of chain drive system.

Dynamic Test of Hydro Mechanical Composite Transmission for Cotton Picker

With a transmission system suitable for a medium or large self-propelled cotton picker as the object of the study,the following work focuses on the influence law of an independently designed hydro-mechanical continuously variable transmission(HMCVT)in the process of changing sections.An HMCVT simulation model was established using the multibody dynamics Simulation X software.The accuracy of the simulation model was verified by comparing the numerical values of the output speed of the HMCVT with model predictions.The HMCVT test bench was built independently using a John Deere 4045HYC11 diesel engine as power input.The engine speed,load torque,oil pressure,and flow of speed regulating valve were considered the influencing factors.The sliding friction power was the response index for the segment change process test.We analysed the reasons for the decrease in output speed during the shifting process,and proposed to effectively reduce the stable speed difference before and after the output shaft shifting by shifting the stage ahead(with displacement ratio of-0.96).This study provides a reference value for the smoothness of the HMCVT of the self-propelled cotton picker,and is relevant in promoting the use of the cotton picker.

RESEARCH OF DYNAMIC CHARACTERIATIC FOR TRANSMISSION SYSTEM

The kinetic precision of transmission chain is a key problem in the research of gear cutting machine transmission system.The traditional point of view is to consider the transmission chain as a geometrical meshing system,thus it is deemed that the kinetic precision of the transmission chain only depends on the manufacturing and assembly errors of its transmission parts.But further research reveals that the kinetic precision of transmission system is closely related with the system dynamic effects.Therefore,from the dynamic point of view,it is discerned that not only deems the transmission chain as a geometrical meshing system but also considers it as a dynamic system performing with torsional vibration.On the basis of analyses and processes of measuring data of samples from tests of cutting machine's kinetic precision of transmission chain,the results represent that the influences of dynamic characteristics of the transmission system on its kinetic precision is non negligible.Experimental methods for discerning the transfer function of torsional vibration of gear transmission system and experimental results have been given.

SELECTION OF TRANSMISSION LINE MODELS USED IN POWER SYSTEM TRANSIENT SIMULATIONS

A method used for determining the number of equivalent π sections oftransmission line model according to the frequency range of interest and the model accura-cy defined herein is proposed.Factors influencing the discrepancies between continuous ordistributed parameter and multiple π or lumped parameter models are discussed.Generalconclusions concerning the π section lengths of line models used in transient stability,faulttransient and switching over-voltage studies are drawn.Time-domain simulation resultsconfirm the effectiveness of this method.

Numerical analysis on aeolian vibration of transmission lines with Stockbridge dampers

We used computational fluid dynamics(CFD) and mode superposition method instead of the energy balance method to compute transmission line aeolian vibrations induced by the Karman vortex.Firstly,we obtained the wind power inputs using CFD theory.The result is effective for aeolian vibration analyses compared with the power which were measured in wind tunnel tests.Then a new aeolian excitation was derived using the wind power equivalent principle,and the aeolian vibration distribution along transmission lines and the wind power input obtained by CFD can be account.Secondly,we formulated the motion equation of a conductor-damper system and derived a semi-analytial solution using the mode superposition method.The Stockbridge-type dampers attached were simplified to the forces transmitted by the clamps.Finally,the semi-analytical solution can be solved by iterative methods.Taking a 1 000 kV Ultra High Voltage transmission line as an example,we analyzed the line with and without dampers by the semi-analytical solution.Compared with the results which were computed by the energy balance method,the semi-analytical solution is precise enogh for aeolian vibration analyses.Besides,we also analyzed the influence of damper position and quantity.

Analysis of transmission efficiency of SSRF electron beam transfer lines

In this article, the main factors which influence transmission efficiency of the SSRF electron beam trans- fer lines are described, including physical requirements for magnet system, vacuum system, beam diagnostic system, trajectory correction system, etc. The dynamic simulation calculation and transmission efficiency analysis of the SSRF electron beam transfer lines are presented, and the studies show that the design purpose of efficient beam transmission and injection will be achieved.