Dual bound states in the continuum enhanced second harmonic generation with transition metal dichalcogenides monolayer

The emergence of two dimensional(2D)materials has opened new possibilities for exhibiting second harmonic genera-tion(SHG)at the nanoscale,due to their remarkable optical response related to stable excitons at room temperature.However,the ultimate atomic-scale interaction length with light makes the SHG of Transition Metal Dichalcogenides(TM-Ds)monolayers naturally weak.Here,we propose coupling a monolayer of TMDs with a photonic grating slab that works with doubly resonant bound states in the continuum(BIC).The BIC slabs are designed to exhibit a pair of BICs,reson-ant with both the fundamental wave(FW)and the second harmonic wave(SHW).Firstly,the spatial mode matching can be fulfilled by tilting FW's incident angle.We theoretically demonstrate that this strategy leads to more than four orders of magnitude enhancement of SHG efficiency than a sole monolayer of TMDs,under a pump light intensity of 0.1 GW/cm^(2).Moreover,we demonstrate that patterning the TMDs monolayer can further enhance the spatial overlap coefficient,which leads to an extra three orders of magnitude enhancement of SHG efficiency.These results demonstrate remarkable pos-sibilities for enhancing SHG with nonlinear 2D materials,opening many opportunities for chip-based light sources,nano-lasers,imaging,and biochemical sensing.

Study on Thermal Expansion Coefficient of Sealing Materials for Ceramic Metal Halide Lamps

With Al2O3, Dy2O3, and SiO2 as starting materials, the basic glass of Al2O3-Dy2O3-SiO2 system was prepared by conventional melting technology, and their thermal expansion coefficients （TECs） at different anneal time were investigated. TECs of the basic glass, which were heat-treated under different temperature, were also investigated. The result showed that TECs of the basic glass gradually approached a fixed value as the anneal time was extended, which suggested that most of the inner stress had been eliminated. After heat treatment, the contents of Dy2O3, Dy2Si2O7, and a new crystal increased up to 1200 ℃ and decreased below 1250 ℃, which was consistent with the TEC change of crystallized samples. This suggests that the crystal has a direct effect on TECs of the crystallized samples.

An 8-Connected Chiral Lanthanide Metal-organic Framework Constructed from Naturally Camphoric Acid:Crystal Structure,Vibrational Circular Dichroism Spectroscopy and Second-order Nonlinear Optical Effect

A chiral lanthanide metal-organic framework based on enantiopure camphoric acid （D-H2cam）, [Nd3（D-cam）8（H2O）4Cl]n （1）, has been synthesized and characterized by single-crystal X-ray structural analysis, elemental analysis, IR, thermal gravimetric, and X-ray powder diffraction. Crystal data for the title compound are as follows： orthorhombic system, space group P212121 with a = 13.8287（7）, b = 14.0715（7）, c = 25.7403（12） A^°, V = 5008.8（4） A^°3, Mr = 1333.08, Z = 4, F（000） = 2644, Dc = 1.768 g/cm^3, μ（MoKα） = 3.189 mm^-1, the final R = 0.0351 and wR = 0.0814 （I 〉 2σ（I））. Compound 1 displays an 8-connected bcu topology 3D framework and hydrogen-bonding interactions stabilize the solid-state structure. The vibrational circular dichroism （VCD） spectrum and second-order nonlinear optical effect of compound 1 have been studied in the solid state.

The Second International Conference on HSLA Steels——Beijing,China,October 1990 Organized by THE CHINESE SOCIETY OF METALS

GENERAL INFORMATIONThe Chinese Society of Metals is pleased to announcethat The Second International Conference on HSLASteels (HSLA’90) will be held in Beijing,China inOctober 1990.Much progress in research and devel-opment of HSLA steels has been achieved by theworld’s metallurgical and materials community since

The Second International Conference on HSLA Steels Beijing,China,October 1990 Organized by THE CHINESE SOCIETY OF METALS

GENERAL INFORMATIONThe Chinese Society of Metals is pleased to announcethat The Second International Conference on HSLASteels(HSLA’90)will be held in Beijing,China inOctober 1990.Much progress in research and devel-opment of HSLA steels has been achieved by theworld’s metallurgical and materials community since

Stress and thickness calculation of a bolted flat cover with double metal sealing rings

The design of a bolted flat cover is extremely important for the structural integrity of pressure vessels.The present design codes provide the thickness calculation equations for a bolted flat cover with single metal gasket.However,the rules for a bolted flat cover with double metal sealing rings are not developed to date.In the study,a new thickness calculation equation for the bolted flat cover with double metal sealing rings is proposed.First,the theoretical stress solution for bolted flat cover with the double metal sealing rings is obtained,based on the theory of simply supported circular plate and then verified using the results from finite element analyses.The results indicate that the influence of double metal sealing ring on the stress of the flat cover is more serious compared to single metal gasket.Second,a more accurate and reasonable equation is proposed to calculate the thickness of bolted flat cover with double metal sealing rings based on the derived theoretical equations of maximum stress.Finally,the influence of linear load and the spacing between rings on the thickness are discussed.Subsequently,a few suggestions are provided to design low-pressure or atmosphere pressure vessels.The study provides a theoretical foundation to develop design codes of pressure vessels in nuclear reactors.

Microstructure and mechanical properties of AZ31B magnesium alloy gas metal arc weld

Wrought magnesium alloy sheets were butt welded with gas metal arc welding process. Pores in the weld were investigated under different welding parameters, the causes of pore formation were systematically disposed, and the effects of porosity on the microstructure and mechanical properties of the joint were analyzed. The microstructure examination shows that the pores mainly appear close to the top or bottom part of the weld, and could connect to each other and lead to the formation of cracks in the welds. However, the pores can be controlled with proper welding parameters. The tensile testing results reveal that the average joint strength is close to or higher than that of the base metal. The microhardness in the weld can be even higher than that in the base metal due to the second ohase strengthening of β-Mg17（A1, Zn）12 formed in the weld.

Metal Sealing Performance of Subsea X-tree Wellhead Connector Sealer

The metal sealing performance of subsea X-tree wellhead connectors is crucial for the safety and reliability of subsea X-trees. In order to establish the theoretical relation between metal sealing ring＇s contact stress and its structural parameters and working pressure, a mechanical analysis method for double-cone sealing of high pressure vessels is applied in analyzing the metal sealing ring under the condition of preload and operation. As a result, the formula of the unit sealing load for the metal sealing ring under operation with residual preload is shown in this paper, which ensures that the metal sealing ring has an excellent sealing effect and can prevent the metal sealing ring from yielding. Besides, while analyzing the sealing process of the metal sealing ring, the change rule of contact stress and working pressure is concluded here, putting forward that the structural parameters of the metal sealing ring are the major factors affecting the change rule. Finally, the analytical solution through theoretical analysis is compared with the simulation result through finite element analysis in a force feedback experiment, and both are consistent with each other, which fully verifies for the design and calculation theory on metal sealing ring＇s contact stress and its structural parameters and working pressure deduced in this paper. The proposed research will be treated as an applicable theory guiding the design of metal seal for subsea X-tree wellhead connectors.

Rare Earth Application in Sealing Anodized Al-Based Metal Matrix Composites

A new method for corrosion protection of Al-based metal matrix composites (MMC) was developed using two-step process, which involves anodizing in H2SO4 solution and sealing in rare earth solution. Corrosion resistance of the treated surface was evaluated with polarization curves. The results showed that the effect of the protection using rare earth sealing is equivalent to that using chromate sealing for Al6061/SiCp. The rare earth metal salt can be an alternative to the toxic chromate for sealing anodized Al MMC.

Application of a Modified Arrhenius Equation to Describe the Time-Temperature Equivalence in Relaxation Analysis of Metal Seals

For the application of the time-temperature superposition principle a suitable relation is needed to describe the time-temperature shift factor a. Therefore, the Arrhenius equation is widely used due to its simple form and often leads to suitable results. Where, the Arrhenius equation presents a linear relation for the temperature-dependent shift factor in logarithmic scale ln（α） with the absolute inverse temperature （1/θ）. However, in cases with a large temperature range which eventually include more complex reaction processes, the functional relation between ln（α） and （1/θ） is nonlinear in the ＇Arrhenius plot＇. In those cases, the monotone change of the nonlinear range in the ＇Arrhenius plot＇ can be interpreted as a transient range between two approximately linear or constant regions. An extended application of the modified Arrhenius equation from Nakamura （1989） is presented in this study for this transient range. The introduced method was applied to describe the time-temperature equivalence in the relaxation analysis of restoring seal force of metal seals, which are used in lid-systems of transport and interim storage casks for radioactive materials. But, the method is widely valid and can be used for different objectives which are characterized by thermorheologically simple behavior with nonlinear sensitivity to inverse temperature.

Second harmonic generation of metal nanoparticles under tightly focused illumination

The near-field and far-field second harmonic （SH） responses of a metal spherical nanoparticle placed in the focal region of a highly focused beam are investigated by using the calculation model based on three-dimensional finite-difference time-domain （FDTD） method. The results show that off-axis backward-propagating SH response can be reinforced by tightly focusing, due to the increase of the relative magnitude of the longitudinal field component and the phase shift along the propagation direction.

Kinetics and Thermodynamic Studies: Adsorption of Pb, Cr and Ni Ions from Spent Lubrication Oil (SLO) Using Acid Modified Clay

Adsorption of Pb, Cr, and Ni ions from spent lubrication oil (SLO) by sulphuric acid modified clay (SAMC) was investigated considering the effect of contact time and temperature of the adsorption system. The removal percentage of the heavy metals was found to be temperature and contact time-dependent. Adsorption of the heavy metals increases with an increase in temperature and contact time with 95.0% - 100% adsorption recorded at the temperature of 331 K with the equilibration time of 12 hours. The thermodynamic and kinetics investigation of the adsorption process showed that the adsorption of these metals by the modified adsorbent is a spontaneous and endothermic physical adsorption process that followed the pseudo-second-order kinetic model.

Study on thermal expansion behavior of Dy_2O_3-Al_2O_3-SiO_2 glass

Employing Dy2O3, Al2O3, and SiO2 as starting materials, several series of Dy2O3-Al2O3-SiO2 sealing glass were prepared. The relationship between their coefficients of thermal expansion and the contents of Dy2O3, Al2O3, and SiO2 were studied respectively. Experimental results showed that Dy2O3 and Al2O3 had a positive effect on the coefficient of thermal expansion of glass, whereas, SiO2 had a negative effect. The coefficient of thermal expansion of glass showed an apparent linear relation to the contents of these three raw materials, from which an estimation model was built, to calculate the coefficient of thermal expansion of sealing glass. Relative errors of the calculating results to testing results were no more than 2%, which suggested that the estimation model was reasonable. This study provides a good theory reference for the practical utilizing of this sealing material, through which a proper glass composition for good sealing could be easily found.

Contact performance analysis of pressure controller's sealing interface in deep in-situ pressure-preserved coring system

The sealing performance of contact interfaces plays the most important role in the design and operation of the in-situ pressure-preserved coring system.To meet the demand of ultra-high pressure-retained coring for oil and gas exploration in deep reservoirs,a quantitative analysis of the contact mechanical behavior of the pressure controller was performed.Based on the micro-contact theory of rough surfaces,a three-dimensional numerical model of the rough contact interface between the valve cover and the valve seat was constructed,and the micro-contact behavior of the metal contact surfaces was comprehensively studied.The results show that the actual contact area of the valve interface increases with the increase of surface roughness before the critical contact point,but decreases after that.Compared with the real contact model with double rough surfaces,although the simplified hard-contact model with a single rough surface can reflect the micro-contact behavior of the rough surface to a certain extent,it cannot truly reveal the microchannel morphology between the sealing interfaces under pressure.Therefore,the realistic double-rough-surface model should be recommended to evaluate the sealing performance of coring tools,particularly for high pressure conditions.The material properties of valves have a significant effect on the contact characteristics of rough surfaces,which suggested that the actual contact area decreases with the increase of the elastic modulus of the contact material under the same loading conditions.The knowledge of this work could help to enhance the seal design of pressure controllers for in-situ pressure-preserved coring.

RESEARCH ON PROTECTION OF STEEL PILES OF BAOSHAN GENERAL STEEL FACTORY WHARF BY USING DZ AND DZ-2 TAPES

Steel piles at the tidal zone can be seriously corroded. Common protective methods such as painting or coating with rubber or other protective materials, etc. cannot provide full protection when used as supplementary protection because these traditional methods require strict pretreatment and sealing of the metallic surface from the corrosive mediums.and time for the protective coatings to solidify. This is very difficult under the severe action of waves and surges on the sea.With our oil-soluble DZ-2 tape, protection efficiency for hanging steel plates at the tidal and splash zones reaches to 82-99%. The protection efficiency of water soluble DZ tape at the tidal zone reaches to 92.9%. The DZ and DZ-2 tapes can rapidly reduce the original corrosion velocity to ten percent and one percent respectively as fully proved by the 500 hour rapid corrosion testing with indoor salt fog and by the relevant electrochemical parameters of instantaneous corrosion velocity,etc.DZ tape absorbs much OH- to cause a pH

Research Progress of Ceramic Metallization Technology

Due to the wide application of ceramics in electronic device packaging,the performance of ceramic metallization layer directly determines the performance of the whole package device.This paper introduces the main preparation methods of ceramic metallization,discusses the influence of Mo powder size,metallization formula,sintering temperature and other factors on the performance of ceramic metallization layer prepared by activated Mo-Mn method,and introduces several kinds of methods that can be tested to test the performance of ceramic metallized sealing samples.A new research direction of Ceramic Metallization Technology in the advanced field is put forward.

Electron Theory Research in Mg-Y Alloy

Adding yttrium to magnesium can improve the mechanical properties, especially the mechanical behavior at high temperature. The valence electron structures of Mg-Y alloy were analyzed with the empirical electron theory of solids and molecules (EET). Calculation shows that yttrium is on the fifth hybrid level and magnesium is on the third one in pure metal crystals. By comparing with aluminum in Mg-Al alloy, it is shown that the reason why the solution strengthening effect of yttrium is better than that of aluminum in Mg-Al alloy is the enhanced bond energy according to EET. And it is concluded from EET analysis that intermetallics Mg_(24)Y_5 can significantly improve the properties of magnesium alloys because yttrium atoms occupy the centers of the octahedron and Mg-Y bonds efficiently strengthen the alloy matrix.

具有圆度误差的径向金属密封接触应力研究

由于加工圆度误差的影响,井下流量控制阀径向金属密封接触应力分布不均匀,从而影响密封性能。利用有限元方法研究具有圆度误差的径向金属密封唇部接触应力分布,并分析圆度误差对径向金属密封接触应力的影响;基于有限元分析结果提出径向金属密封接触应力分布的理论解析式,并进行误差分析。具有圆度误差的径向金属密封唇部接触应力分布的理论解与数值解相符,各参数引起的最大接触应力的平均相对误差约为10%。根据具有圆度误差的径向金属密封副接触应力的分布规律,提出合理的过盈量函数,修正了径向金属密封轴对称结构的悬臂梁模型的接触应力理论关系式,得出了圆度误差下的径向金属密封接触应力分布规律。研究结果为井下流量控制阀径向金属密封的设计提供了理论指导。

W形密封结构金属封隔器性能研究

针对橡胶封隔器难以适应150℃、70 MPa以上环境的缺点,设计一种适用于230℃、70 MPa工况,两端传递载荷,中间中空促进径向变形的W形密封结构的金属封隔器,并研究其密封性能。根据工况需求,以温度依赖性和超弹性激发应力选择β-NiTi合金作为W形密封结构材料,以W形结构坐封后产生的接触应力评价其密封性能,以工作承压后W形结构的弹性-超弹性应变率评价其解封性能,分析W形密封结构半径、壁厚及壁厚比对其密封性能的影响,并对设计优化后的W形结构进行密封性能仿真分析。结果表明:结构半径对W形密封结构的密封性能和解封性能影响较小,而壁厚与壁厚比均显著影响密封性能和解封性能;随着壁厚的增加,W形密封结构的密封性能逐渐下降但解封性能逐渐上升,随着壁厚比的增加,密封性能逐渐下降解封性能先上升后下降。对设计优化后的W形结构进行密封性能仿真分析,结果表明,基于β-NiTi合金材料的W形密封结构金属封隔器完全可以适用于高温高压环境,其在230℃、70 MPa的工况下坐封载荷为220 kN,弹性-超弹性应变率达90%以上。