High-Pressure Phase Transitions of PbTe Using the First-Principles Calculations

High-pressure structural phase transitions in PbTe are investigated by means of the first principles total energy calculations within the generalized gradient approximation （GOAl and local density approximation CLDA） by using the density functional theory. First principle calculation shows that PbTe is stable with the NaCl-type （B1） structure under amSient conditions and transforms to the CsCl-type （B2） structure under high pressure via an intermediate phase. Two candidate structures of the intermediate phase, namely Prima and Cmcm, are chosen for total energy calculations and discussed. It indicates that the intermediate phase adopts the Pnma structure rather than the Cmcm structure, and lattice parameters of the Pnma phase calculated by using OGA and LDA are in consistent with experimental results.

Origin of Photocatalytic Activity of BiPO4： the First-principles Calculations

Geometric and electronic structures of three polymorphs of BiPO4（m MBIP, n MBIP and HBIP） have been investigated by the first-principles calculations. The results show that PO4 tetrahedron in n MBIP is distorted most, and m MBIP possesses minimum effective mass of carriers in three polymorphs of BiPO4. Further, the leading role of inductive effect of dipole moment or effective mass of carries in the separation of electron-hole pairs is analyzed. Based on the fact that n MBIP has higher photocatalytic activity than m MBIP, it can be inferred that the inductive effect of dipole moment deriving from distorted PO4 tetrahedron is the dominant factor affecting the separation efficiency of carries. The calculated results represent that n MBIP has more appropriate redox potential and narrower band gap than others. These findings may provide meaningful guidance for further understanding on the relationship between unique crystal structure and photocatalytic activity of BiPO4.

Magnetic properties of several potential rocksalt half-metallic ferromagnets based on the first-principles calculations

Several rocksalt Sr4X3N （X = O, S, Se, and Te） are predicted to be potential half-metallic ferromagnets free of transition-metal and rare-earth elements by performing the first-principles calculations. Then their magnetic properties, such as the half metallicity and the crystal-cell magnetic moments are investigated. The Sr4X3N possibly have higher Curie temperatures and have more stable half metallicity than the Sr4X3C. Their crystal-cell magnetic moments are all 1.00 μB. The crystal-cell magnetic moments and the half metallicity arise mainly from the N ions. The main mechanism is the strong covalent interaction leading to the sp2 hybridized orbitals in the Sr4X3N. Then two Sr-5s and three N-2p electrons enter into three sp2 hybridized orbitals. Among these five electrons, four electrons are paired and one is unpaired, so there are three spin-up electrons and two spin-down electrons in these sp2 hybridized orbitals.

Organic Cation Effect on the Physical Properties of CH3NH3PbI3 Perovskite from the First-principles Study

The effect of the distribution of organic cations CH3NH3^＋（MA^＋） on the stability,electronic structures and optical properties of CH3NH3 Pb I3 perovskite have been investigated using the plane-wave ultrasoft pseuudopotentials. Generalized gradient approximation and local density approximation are used to optimize the geometries of six models, which are different in the orientation of organic cations. The results show that model C is more stable than others, and the main contribution to the top of valence band is from I 5p states. In the bottom of conduction bands, the main components are Pb 6s states with an overlapping of I 5p states. When the orientation of organic group is transforming, the Pb I6 octahedra will distort and the band structure will alter with it, which affect the generation and migration of photon-generated carriers and optical properties.

Accurate calculations of the high-pressure elastic constants based on the first-principles

The energy term corresponding to the first order of the strain in Taylor series expansion of the energy with respect to strain is always ignored when high-pressure elastic constants are calculated. Whether the modus operandi would affect the results of the high-pressure elastic constants is still unsolved. To clarify this query, we calculate the high-pressure elastic constants of tantalum and rhenium when the energy term mentioned above is considered and neglected, respectively.Results show that the neglect of the energy term corresponding to the first order of the strain indeed would influence the veracity of the high-pressure elastic constants, and this influence becomes larger with pressure increasing. Therefore, the energy term corresponding to the first-order of the strain should be considered when the high-pressure elastic constants are calculated.

Electronic Structure and Optical-absorption Properties of C-, N-, and S-doped BiOCl: the First-principles Calculations

Impurity formation energy, electronic structure, and photocatalytic properties of C-, N-, or S-doped BiOCl are investigated by density-functional theory plus U calculations(DFT + U). Results show that the doping effect of S is better than that of C or N on the tunable photocatalytic activities of BiOCl. At low concentration, S-doped BiOCl systems are the most stable under Bi-rich growth conditions because of their lower impurity-formation energy. Compared with the electronic structures of S-doped BiOCl, C-or N-doped BiOCl have relatively deeper impurity energy levels appearing in their band gap(except Bi_(36)O_(35)NCl_(36)), which may act as photogenerated carrier-recombination centers and reduce photocatalytic activity. At high concentration, S is substituted on the O lattice site system, whereas some S 3p states mix with the valence band; this mixture leads to an obvious band-gap decrease and continuum-state formation above the valence-band edge of BiOCl. Such activity is advantageous to photochemical catalysis response. Compared with pure Bi OCl and a low-concentration S-doped system, a high-concentration S-doped system shows an obvious redshift on the absorption edge and has better photocatalytic O_2 evolution performance.

Clarifying the atomic origin of electron killers in β-Ga_(2)O_(3) from the first-principles study of electron capture rates

The emerging wide bandgap semiconductorβ-Ga_(2)O_(3) has attracted great interest due to its promising applications for high-power electronic devices and solar-blind ultraviolet photodetectors.Deep-level defects inβ-Ga_(2)O_(3) have been intensively studied towards improving device performance.Deep-level signatures E_(1),E_(2),and E_(3) with energy positions of 0.55–0.63,0.74–0.81,and 1.01–1.10 eV below the conduction band minimum have frequently been observed and extensively investigated,but their atomic origins are still under debate.In this work,we attempt to clarify these deep-level signatures from the comparison of theoretically predicted electron capture cross-sections of suggested candidates,Ti and Fe substituting Ga on a tetrahedral site(Ti_(GaI) and Fe_(GaI))and an octahedral site(Ti_(GaII) and Fe_(GaII)),to experimentally measured results.The first-principles approach predicted electron capture cross-sections of Ti_(GaI) and Ti_(GaII) defects are 8.56×10^(–14) and 2.97×10^(–13) cm^(2),in good agreement with the experimental values of E_(1) and E_(3) centers,respectively.We,therefore,confirmed that E_(1) and E_(3) centers are indeed associated with Ti_(GaI) and Ti_(GaII) defects,respectively.Whereas the predicted electron capture cross-sections of Fe_(Ga) defect are two orders of magnitude larger than the experimental value of the E_(2),indicating E_(2) may have other origins like C_(Ga) and Ga_(i),rather than common believed Fe_(Ga).

Transformation of long-period stacking ordered structures in Mg-Gd-Y-Zn alloys upon synergistic characterization of first-principles calculation and experiment and its effects on mechanical properties

Based on experiments and first-principles calculations,the microstructures and mechanical properties of as-cast and solution treated Mg-10Gd-4Y-xZn-0.6Zr(x=0,1,2,wt.%)alloys are investigated.The transformation process of long-period stacking ordered(LPSO)structure during solidification and heat treatment and its effect on the mechanical properties of experimental alloys are discussed.Results reveal that the stacking faults and 18R LPSO phases appear in the as-cast Mg-10Gd-4Y-1Zn-0.6Zr and Mg-10Gd-4Y-2Zn-0.6Zr alloys,respectively.After solution treatment,the stacking faults and 18R LPSO phase transform into 14H LPSO phase.The Enthalpies of formation and reaction energy of 14H and 18R LPSO are calculated based on first-principles.Results show that the alloying ability of 18R is stronger than that of 14H.The reaction energies show that the 14H LPSO phase is more stable than the 18R LPSO.The elastic properties of the 14H and 18R LPSO phases are also evaluated by first-principles calculations,and the results are in good agreement with the experimental results.The precipitation of LPSO phase improves the tensile strength,yield strength and elongation of the alloy.After solution treatment,the Mg-10Gd-4Y-2Zn-0.6Zr alloy has the best mechanical properties,and its ultimate tensile strength and yield strength are 278.7 MPa and 196.4 MPa,respectively.The elongation of Mg-10Gd-4Y-2Zn-0.6Zr reaches 15.1,which is higher than that of Mg-10Gd-4Y0.6Zr alloy.The improving mechanism of elastic modulus by the LPSO phases and the influence on the alloy mechanical properties are also analyzed.

First-principles study on stability and superconductivity of ternary hydride LaYH_(x)(x=2,3,6 and 8)

Recent studies have shown that the La-and Y-hydrides can exhibit significant superconducting properties under high pressures.In this paper,we investigate the stability,electronic and superconducting properties of LaYH_(x)(x=2,3,6 and 8)under 0-200 GPa.It is found that LaYH_(2) stabilizes in the C2/m phase at ambient pressure,and transforms to the Pmmn phase at 67 GPa.LaYH_(3) stabilizes in the C2/m phase at ambient pressure,and undergoes phase transitions of C2/m→P2_(1)/m→R3m at 12 GPa and 87 GPa,respectively.LaYH_(6) stabilizes in the P4_32_12 phase at ambient pressure,and undergoes phase transitions of P4_(3)2_(1)2→P4/mmm→Cmcm at 28 GPa and 79 GPa,respectively.LaYH_(8) stabilizes in the Imma phase at 60 GPa and transforms to the P4/mmm phase at 117 GPa.Calculations of the electronic band structures show that the P4/mmm-LaYH_(8) and all phases of LaYH_(2) and LaYH_(3) exhibit metallic character.For the metallic phases,we then study their superconducting properties.The calculated superconducting transition temperatures(T_c)are 0.47 K for C2/m-LaYH_(2) at 0 GPa,0 K for C2/m-LaYH_(3) at 0 GPa,and 55.51 K for P4/mmm-LaYH_(8) at 50 GPa.

The growth ofβphase in Mg-Gd-Y-Ni alloy by experimental and first-principles study

The paper reports on the atomic investigation aboutβphase in Mg_(96)Gd_(2)Y_(1)Ni_(1) alloy by using the first-principles study and the high-angle annular dark-field scanning transmission electron microscope(HAADF-STEM)corrected by atomic Cs.By using HAADF-STEM,the rectangularβphases were observed in the underage and peak aging stages in Mg_(96)Gd_(2)Y_(1)Ni_(1) alloy.Theβphase could be precipitated from the previously precipitatedβphase,and theβphase grew in steps when it was precipitated.A special transition structure of three atomic layer thicknesses was first observed at the edge of theβphase and the structure of this interface is probably as theβ/Mg_(1) interface for the analysis of thermodynamic characterization and electronic characterization.Theβ'phase and theβ_(H) structure were precipitated only at the edge of the length directions of theβphase.Theβ'phase continues to grow into aβphase directly without the formation ofβ_(1) phase,resulting in an increase in the length of theβphase,which is discovered for the first time.

First-principles study on the diffusion behavior of Cs and I in Cr coating

Cs and I can migrate through fuel-cladding interfaces and accelerate the cladding corrosion process induced by the fuel-cladding chemical interaction.Cr coating has emerged as an important candidate for mitigating this chemical interaction.In this study,first-principles calculations were employed to investigate the diffusion behavior of Cs and I in the Cr bulk and grain boundaries to reveal the microscopic interaction mitigation mechanisms at the fuel-cladding interface.The interaction between these two fission products and the Cr coating were studied systematically,and the Cs and I temperature-dependent diffusion coefficients in Cr were obtained using Bocquet’s oversized solute-atom model and Le Claire’s nine-frequency model,respectively.The results showed that the Cs and I migration barriers were significantly lower than that of Cr,and the Cs and I diffusion coefficients were more than three orders of magnitude larger than the Cr self-diffusion coefficient within the temperature range of Generation-IV fast reactors(below 1000 K),demonstrating the strong penetration ability of Cs and I.Furthermore,Cs and I are more likely to diffuse along the grain boundary because of the generally low migration barriers,indicating that the grain boundary serves as a fast diffusion channel for Cs and I.

First-Principles Investigation of Charge Transfer Mechanism of B-Doped 3C-SiC Semiconductor Material

This study delves into the charge transfer mechanism of boron (B)-doped 3C-SiC through first-principles investigations. We explore the effects of B doping on the electronic properties of 3C-SiC, focusing on a 12.5% impurity concentration. Our comprehensive analysis encompasses structural properties, electronic band structures, and charge density distributions. The optimized lattice constant and band gap energy of 3C-SiC were found to be 4.373 Å and 1.36 eV respectively, which is in agreement with previous research (Bui, 2012;Muchiri et al., 2018). Our results show that B doping narrows the band gap, enhances electrical conductivity, and influences charge transfer interactions. The charge density analysis reveals substantial interactions between B dopants and surrounding carbon atoms. This work not only enhances our understanding of the material’s electronic properties, but also highlights the importance of charge density analysis for characterizing charge transfer mechanisms and their implications in the 3C-SiC semiconductors.

First-Principles Calculation of the Topological Nodal-Line Semimetal FeGe_(2)

The electronic and topological properties of FeGe2 with a tetragonal crystal structure were investigated via first-principles calculations.The results demonstrate that FeGe2 in this structure exhibits anti-ferromagnetism,with two bands crossing the Fermi level nesting each other at high-symmetry points in the Brillouin zone,forming a nodal ring where the nodes intersect in momentum space.Additionally,it possesses nontrivial topological surface states.Upon inclusion of SOC(spin-orbit coupling),there are no significant changes observed in the band structure,nodal features,or surface states,indicating the persistence of its topological nodal-line characteristics.

First-Principles Study of the New Layered Ternary Metal Telluride,Eu_(2)InTe_(5)

In this study,we performed first-principles calculations using the VASP(Vienna Ab initio Simulation)software package to investigate the crystal structure,electronic structure,and optical properties of a new layered ternary metal chalcogenide,Eu_(2)InTe_(5).Our results show that Eu_(2)InTe_(5) is a non-zero-gap metal with a layered structure characterized by strong intra-layer atomic bonding and weak inter-layer interaction,which suggests its potential application as a nanomaterial.We also studied the optical properties,including the absorption coefficient,imaginary and real parts of the complex dielectric constant,and found that Eu_(2)InTe_(5) exhibits strong photoresponse characteristics at the junction of ultraviolet and visible light as well as blue-green light,with peaks at wavelengths of 389 nm and 477 nm.This suggests that it could be used in the development of UV(ultraviolet)detectors and other optoelectronic devices.Furthermore,due to its strong absorption,low loss,and low reflectivity,Eu_(2)InTe_(5) has the potential to be used as a promising photovoltaic absorption layer in solar cells.

Highly active Fe_(36)Co_(44) bimetallic nanoclusters catalysts for hydrolysis of ammonia borane: The first-principles study

In this paper,Fe_(36)Co_(44)nanocluster structure is used to catalyze the hydrolysis reaction of ammonia borane to produce H_(2).Firstly,we complete the construction of Fe_(36)Co_(44)cluster structure and calculate the electronic properties of the cluster.By comparing the adsorption process of Ammonia Borane (AB) in active sites of the cluster,which have different Effective Coordination Number (ECN),the qualitative relationship between ECN and the catalytic activation of AB is clarified,and the optimal catalytic active site is obtained.Then,from the perspective of different reaction paths,we study the hydrolysis reaction of AB in multiple paths,and obtain 5 different reaction paths and energy profiles.The calculation results show that in the case of N–H bond priority break (path 5),the reaction has the minimum rate-determining step (RDS) barrier (about 1.02 e V) and the entire reaction is exothermic (about 0.40 e V).So,path 5 is an optimal catalytic reaction path.This study will have an important guiding significance for the study of the AB hydrolysis reaction mechanism.

First-principles calculations of Ni–(Co)–Mn–Cu–Ti all-d-metal Heusler alloy on martensitic transformation,mechanical and magnetic properties

The martensitic transformation,mechanical,and magnetic properties of the Ni_(2)Mn_(1.5-x)Cu_(x)Ti_(0.5) (x=0.125,0.25,0.375,0.5) and Ni_(2-y)Co_(y)Mn_(1.5-x)Cu_(x)Ti_(0.5)[(x=0.125,y=0.125,0.25,0.375,0.5) and (x=0.125,0.25,0.375,y=0.625)]alloys were systematically studied by the first-principles calculations.For the formation energy,the martensite is smaller than the austenite,the Ni–(Co)–Mn–Cu–Ti alloys studied in this work can undergo martensitic transformation.The austenite and non-modulated (NM) martensite always present antiferromagnetic state in the Ni_(2)Mn_(1.5-x)Cu_(x)Ti_(0.5) and Ni_(2-y)Co_(y)Mn_(1.5-x)Cu_(x)Ti_(0.5) (y<0.625) alloys.When y=0.625 in the Ni_(2-y)Co_(y)Mn_(1.5-x)Cu_(x)Ti_(0.5) series,the austenite presents ferromagnetic state while the NM martensite shows antiferromagnetic state.Cu doping can decrease the thermal hysteresis and anisotropy of the Ni–(Co)–Mn–Ti alloy.Increasing Mn and decreasing Ti content can improve the shear resistance and normal stress resistance,but reduce the toughness in the Ni–Mn–Cu–Ti alloy.And the ductility of the Co–Cu co-doping alloy is inferior to that of the Ni–Mn–Cu–Ti and Ni–Co–Mn–Ti alloys.The electronic density of states was studied to reveal the essence of the mechanical and magnetic properties.

A first-principles study on elastic properties and stability of Ti_xV_(1-x)C multiple carbide

The structure,stability and elastic properties of di-transition-metal carbides TixV1-xC were investigated by using the first-principles with a pseudopotential plane-waves method.The results show that the equilibrium lattice constants of TixV1-xC show a nearly linear reduction with increasing addition of V.The elastic properties of TixV1-xC are varied by doping with V.The bulk modulus of Ti0.5V0.5C is larger than that of pure TiC,as well as Ti0.5V0.5C has the largest C44 among TixV1-xC（0≤x≤1）,indicating that Ti0.5V0.5C has higher hardness than pure TiC.However,Ti0.5V0.5C presents brittleness based on the analysis of ductile/brittle behavior.The Ti0.5V0.5C carbide has the lowest formation energy,indicating that Ti0.5V0.5C is more stable than all other alloys.

A first-principles study on remote van der Waals epitaxy through a graphene monolayer on semiconductor substrates

To investigate the mechanism of remote epitaxy, where the overlayer can follow the same crystalline structure as the underlying semiconductor substrate through a thin two-dimensional interlayer, we systematically study the potential fluctuations of graphene covered Si, Ga As, and Ga N substrates from first-principles. We find that the uneven semiconductor surface, the distorted graphene, and the non-uniform interface charge transfer make significant contributions to the potential fluctuation. The semiconductor substrate with different surface reconstructions and orientations will generate different potential fluctuations through the graphene interlayer. We also calculate and compare the adsorption of adatoms on graphene covered substrates. The adsorption energies of adatoms not only depend on their distances to the underlying semiconductor surface, but are also sensitive to the direction of the charge transfer at the graphene/substrate interface. Changing the semiconductor reconstruction or orientation could even reverse the order of the adsorption energies of cation and anion adatoms by reversing the interface charge transfer direction, leading to a change in the growth orientation of the overlayer.Our study improves the understanding of the mechanism of remote epitaxy, and reveals that it is possible to control the initial nucleation and orientation of overlayers by changing the semiconductor reconstructions and/or orientations in remote epitaxy.

First-principles Study of Electronic Structural and Mechanical Properties of Mg_(x)La(x=1,2,3)Compounds under Pressure

The effects of pressure on structural,elastic and electronic properties of Mg_(x)La(x=1,2,3)compounds are investigated by using CASTEP program based on the density functional theory.The calculated equilibrium lattice parameters at zero pressure agree well with available experimental and theoretical values.The calculated DOS show that the structure of these compounds remains mechanically stable and structural phase transformation is not induced with increasing pressure from 0 to 30 GPa,and their structural stability increases with pressure.The ductility of MgLa can be improved by increasing pressure,which is the same as Mg_(2)La in 0-20 GPa,while brittle behavior turns into ductile behavior in 0-5 GPa for Mg_(3)La.The resistance to volume deformation of Mg_(x)La(x=1,2,3)compounds can be improved as the pressure increases.The shear deformation resistance and elastic stiffness of Mg_(3)La can be enhanced by rising pressure,but MgLa and Mg_(2)La increase first and then decrease when pressure is up to 25 GPa.In addition,the three compounds exhibit the elastic anisotropy with pressure.

Pressure-dependent electronic,optical,and mechanical properties of antiperovskite X_(3)NP(X=Ca,Mg):A first-principles study

Hydrostatic pressure provides an efficient way to tune and optimize the properties of solid materials without chang-ing their composition.In this work,we investigate the electronic,optical,and mechanical properties of antiperovskite X_(3)NP(X^(2+)=Ca,Mg)upon compression by first-principles calculations.Our results reveal that the system is anisotropic,and the lat-tice constant a of X_(3)NP exhibits the fastest rate of decrease upon compression among the three directions,which is different from the typical Pnma phase of halide and chalcogenide perovskites.Meanwhile,Ca_(3)NP has higher compressibility than Mg_(3)NP due to its small bulk modulus.The electronic and optical properties of Mg_(3)NP show small fluctuations upon compression,but those of Ca_(3)NP are more sensitive to pressure due to its higher compressibility and lower unoccupied 3d orbital energy.For example,the band gap,lattice dielectric constant,and exciton binding energy of Ca_(3)NP decrease rapidly as the pressure increases.In addition,the increase in pressure significantly improves the optical absorption and theoretical conversion effi-ciency of Ca_(3)NP.Finally,the mechanical properties of X_(3)NP are also increased upon compression due to the reduction in bond length,while inducing a brittle-to-ductile transition.Our research provides theoretical guidance and insights for future experi-mental tuning of the physical properties of antiperovskite semiconductors by pressure.